1/120
Looks like no tags are added yet.
What are the five goals of spinal orthotic treatment?
Reduce inflammation/spasm; reduce compressive stress; stabilize joints; correct, prevent, or support deformity; stabilize and align bone after fracture.
How does a spinal orthosis reduce inflammation and secondary muscle spasm?
It rests tissues in a selected position and limits irritating movement.
What is the lecture’s example of an orthosis used temporarily after early whiplash?
A soft cervical collar.
What is axial loading?
Compressive force transmitted along the spine, including the weight of structures above a spinal segment.
How can an orthosis help after cervical fusion?
It supports the cervical spine and limits motion to protect healing structures.
What spinal deformities may be managed with orthotic support?
Scoliosis and kyphosis.
Why might a scoliosis body jacket have a strategically placed opening?
To accommodate the rib prominence and allow the intended corrective positioning.
What does CO stand for?
Cervical orthosis.
What does CTO stand for?
Cervicothoracic orthosis.
What does SO stand for?
Sacral orthosis.
What does LSO stand for?
Lumbosacral orthosis.
What does TLSO stand for?
Thoracolumbosacral orthosis.
What does CTLSO stand for?
Cervicothoracolumbosacral orthosis.
What three force-related questions should a PT ask when assessing a spinal orthosis?
Where is force applied? Is it applied in the correct location and direction? What motion does it restrict?
What common materials are used in spinal orthoses?
Canvas, leather, metal/aluminum, plastics, and synthetics.
How is leather generally cleaned?
Wipe it with a damp cloth; generally avoid immersion.
What determines the correct cleaning method for a spinal orthosis?
The specific device’s materials and manufacturer/orthotist instructions.
A patient wearing a spinal orthosis needs an MRI. What must be verified?
The specific device’s MRI compatibility and the prescribed plan for maintaining stabilization if removal is necessary.
Why must the PT identify the front and back components of a spinal orthosis?
Correct orientation is necessary for proper force application, motion restriction, and patient/caregiver education.
What is the purpose of skeletal skull traction before definitive bracing?
Temporarily stabilize an unstable cervical injury while awaiting a halo or other prescribed management.
Where do skull tongs and halo pins engage the skull?
The outer skull bone.
What provides the traction force in skeletal skull traction?
A pulley and weight system attached to the fixation apparatus.
What mobility restriction is emphasized for a patient in skeletal skull traction?
The patient remains in bed with prescribed alignment maintained.
Why should a PT avoid bumping the traction weights?
Disturbing the weights can disrupt the prescribed traction force and cervical stabilization.
What should a PT do before turning a patient in skeletal skull traction?
Follow the treating team’s positioning orders; do not independently turn the patient side to side.
What complications can occur at skull fixation sites?
Infection, slippage, and bone necrosis.
Why might a skull fixation pin need relocation?
Local bone necrosis or another fixation-site complication may compromise secure attachment.
What complications are associated with prolonged bed rest during skull traction?
Pressure injuries, DVT, weakness, and decreased function.
How does a halo brace connect the skull to the trunk?
Skull pins attach to a halo ring, which connects through uprights to a thoracic vest.
Why can a halo allow mobility that skull traction generally does not?
The halo transfers stabilization to a wearable ring-upright-vest system rather than a bed-based traction system.
Does receiving a halo automatically mean the patient can get out of bed?
No; mobility also depends on medical stability and clearance.
Why might an infant require a different skull stabilization system?
The softer skull may require an alternative external support system; the lecture illustrates foam and Velcro.
Why can walking be difficult for a patient wearing a halo?
Restricted head movement limits looking down to inspect the floor and detect obstacles.
A patient in a halo repeatedly misses obstacles near the feet. What brace-related limitation helps explain this?
The patient cannot readily flex the neck to inspect the walking surface.
What role does abdominal pressure play in spinal orthotic stabilization?
It contributes to trunk support and partially unloads spinal structures.
Which brace is the lecture’s exception to reliance on abdominal pressure?
The Jewett brace.
What is a three-point pressure system?
One force opposed by two counterforces at different locations to control alignment or motion.
What are the three contact areas of a Jewett brace?
Sternum, pubic region, and posterior trunk.
In a Jewett brace, which way do the sternal and pubic pads push?
Posteriorly against the anterior body.
In a Jewett brace, which way does the posterior pad push?
Anteriorly against the posterior trunk.
What overall movement does the Jewett brace promote, and what movement does it restrict?
It creates an extension moment and restricts trunk flexion.
What fracture type is associated with the Jewett brace in the lecture?
Selected spinal compression fractures.
Why may a Jewett brace support earlier mobility after a compression fracture?
It protects the injured region from flexion while providing relatively lightweight support.
A patient with a prescribed Jewett brace leans forward easily despite wearing it. What should the PT assess?
Pad locations, closure security, fit, and whether the intended three-point forces are effectively restricting flexion.
A patient feels better in a Jewett brace and wants to lift heavy boxes. What is the best explanation for continuing restrictions?
Pain relief reflects support and reduced motion; it does not establish that the fracture has healed.
What factors determine the degree and type of spinal stabilization required?
Injury type/severity, spinal stability, required motion restriction, age, weight/body shape, activity level, tolerance, and ability to manage the brace.
Does advanced age alone justify less stabilization for an unstable fracture?
No; injury stability determines protection needs, while age and frailty affect device selection and tolerance.
Why can obesity affect spinal orthosis selection?
Body shape and soft tissue may interfere with fit, force application, and effective motion control.
Where should the pelvic band sit?
Below the ASIS and above the greater trochanters.
What are the main functions of the pelvic band?
Provide the inferior foundation and an attachment/support base for posterior uprights.
What is another name for posterior uprights?
Paraspinal bars.
Where are paraspinal bars located?
On either side of the spine.
What are the functions of posterior uprights?
Stabilize the trunk and connect the pelvic band to upper supporting components.
Where should the thoracic band sit?
Approximately 1 inch below the inferior angles of the scapulae.
How can the PT check the thoracic band’s position?
Compare its upper edge with the inferior scapular angles and confirm the intended clearance.
Where is an interscapular bar located relative to a thoracic band?
Higher, between the scapulae.
What is the purpose of an interscapular bar?
Provide higher support and attachment for upper stabilizing components.
Which components specifically add lateral-flexion control?
Lateral uprights.
How are lateral uprights typically shaped?
Contoured inward at the waist rather than projecting straight away from the body.
What does an abdominal apron or pad contribute?
Anterior support and abdominal compression.
How do the components of a molded body jacket differ from those of a metal-frame brace?
Their support functions are incorporated into the molded shell rather than separate visible bands and bars.
What is a bivalve body jacket?
A brace with separate anterior and posterior shells connected by closures.
A brace fits securely but permits unwanted side bending. Which component should you assess for adequate control?
The lateral uprights or corresponding lateral support in the molded shell.
A pelvic band rests directly over the greater trochanters. What fitting problem is present?
It is too low relative to the lecture’s landmark of above the greater trochanters and below the ASIS.
A thoracic band presses against the inferior scapular angles. What should be reassessed?
Its height and clearance; the lecture places it approximately 1 inch below the scapular angles.
Why can spinal orthoses make ADLs harder?
They restrict movement and add weight, increasing the effort needed for walking, grooming, eating, and other tasks.
What happens to movement at spinal segments above and below an orthosis?
They may move more to compensate for the restricted region.
Why might a patient wearing a TLSO develop neck discomfort or headaches?
Increased compensatory cervical motion may stress structures above the brace.
A patient wearing a body jacket repeatedly uses excessive neck motion to complete tasks. What should the PT address?
Task setup and movement strategies that reduce compensatory neck stress while preserving spinal precautions.
Why can muscles beneath an orthosis weaken or atrophy?
Immobilization reduces their activity and loading.
Which muscle groups does the lecture particularly emphasize as vulnerable to weakness?
Cervical and abdominal muscles.
What should occur before prescribing isometrics involving the protected spinal region?
Confirm clearance and absence of contraindications with the prescribing clinician.
Why does oxygen consumption increase during activity with a spinal orthosis?
Added brace weight and restricted movement increase the effort required.
Why can thoracic expansion decrease with a spinal orthosis?
Abdominal and thoracic compression limit expansion during inspiration.
What combination makes stair climbing especially demanding in a rigid trunk brace?
Increased oxygen demand combined with restricted thoracic expansion.
A patient becomes breathless and anxious on stairs while wearing a TLSO. What brace-related mechanism may contribute?
Higher activity effort increases breathing demand while the brace limits expansion, making it difficult to catch a breath.
What factors besides the spinal diagnosis should be considered during brace assessment?
Ostomy, feeding tube, continence, skin condition, age, weight, activity level, hand/arm strength, and caregiver availability.
Why should a PT assess grip and upper-extremity strength in a patient receiving a spinal orthosis?
The patient may need adequate strength to position the brace and secure or release its closures.
A patient understands the wear schedule but cannot fasten the straps. What additional need should be addressed?
Caregiver assistance or an approved strategy for managing closures safely.
Why do feeding tubes and ostomies matter when fitting a spinal orthosis?
They may interfere with brace contact, pressure distribution, access, and hygiene.
In what position are most spinal orthoses applied according to the lecture?
Recumbent, usually supine or side-lying as directed.
Why is a spinal orthosis generally applied before sitting up?
Recumbency reduces axial loading while the brace is positioned and secured.
Why is log rolling used during brace application?
To maintain spinal alignment and minimize twisting during repositioning.
When might two people be needed for brace application?
When precautions require one person to control the head/cervical alignment and another to control the torso.
What should be checked before raising the patient to sitting?
Correct brace position and snug, secured straps.
In what order should spinal orthosis closures be tightened?
From bottom to top.
Why are closures tightened from bottom to top?
This contains and supports abdominal soft tissue upward into the brace.
What may happen if a trunk orthosis is tightened from top to bottom?
Abdominal tissue may protrude below the brace and the lower portion may flare outward.
A patient’s brace is fastened at the top first, leaving the abdomen bulging below it. What technique should be corrected?
Reposition and tighten the brace from bottom to top according to the fitting instructions.
What commonly happens to a spinal orthosis when the patient sits?
It migrates upward.
Why can sitting cause a spinal orthosis to migrate upward?
Contact near the hip crease and greater trochanters pushes the brace upward as the hips flex.
What should be reassessed after a patient rises from sitting?
Brace migration, anatomical alignment, and closure security.
A TLSO rides into the axillae after sitting. What is the likely explanation?
Upward migration related to hip flexion and contact with the lower brace edges.
What does chafing often suggest about spinal orthosis fit?
The brace may be too loose, allowing friction from movement against the skin.
A patient reports rubbing beneath the brace and asks to loosen it. What should the PT assess first?
Whether excessive looseness and brace movement are already causing the rubbing.
How often should pressure points be checked?
Daily, according to the lecture, and as otherwise directed.
Which pressure areas are particularly important with a Jewett brace?
Sternum, pubic region, and posterior pad contact.
Which pressure areas are especially relevant with cervical supports?
Chin and occiput.
What is the lecture’s redness guideline after brace removal?
Redness that resolves within 20 minutes is usually acceptable; redness persisting beyond 20 minutes requires assessment.
Does redness resolving within 20 minutes guarantee the skin is healthy?
No; pain, skin injury, or other concerning findings still require assessment.