1/12
Looks like no tags are added yet.
Back-Up material
Material inserted in a joint that controls the depth and back profile of the applied sealant.
Bedded Bearing
A bearing with contact surfaces having an intermediate bedding of cementitious material.
Bond Breaker
Film or thin strip of material applied to prevent sealant adhesion to the back of a joint.
Dry bearing
A bearing with no intermediate bedding material.
Gasket
Flexible, generally elastic, preformed material that forms a seal when compressed
Isolated Member
A supported member, for which, in the event of failure, no secondary means of load transfer is available.
Joint Filler
Compressible, non-adhesive material used to fill movement joints during their construction
Non-isolated member
A supported member which, in the event of loss of a support, would be capable of transferring its load to adjacent members.
75%
_______ of the area of contact between the wall or column and connection
12 mm
A minimum joint width of _____ between panels is a common practice.
1:1
For elastic sealants, the minimum thickness should be 5 mm, the ratio of width to thickness should never exceed ____ and for optimum performance 2:1.
Mastic strips
They require an initial compression to ensure proper adhesion to the components forming the joint.
Tensile stresses
The differential shrinkage coefficient (the difference in total free strain between the two components of the composite member) needs to be established to calculate the resultant __________.