1/50
Looks like no tags are added yet.
The incoming power supply of the x-ray circuit is?
A/C
How many volts of power is coming in the x-ray circuit?
220 volts
The fuses in the x-ray circuit are also known as?
circuit breaker
The job is to protect equipment from excessive current?
fuses (AKA circuit breaker)
The fuses (AKA circuit breaker) is located?
on the primary side
what measures the incoming line voltage?
line voltage meter (AKA compensator)
What detects a surge/drop?
line voltage meter (AKA compensator)
What maintains the incoming 220 volts to the autotransformer?
line voltage meter (AKA compensator)
How many coils does the autotransformer have?
1
*TIP= Auto equals self
What does the autotransformer operate on?
self induction
What type of power supply do all transformers work off of?
A/C
The role/job is kVp selection not production
autotransformer
The autotransformer is located?
on the low voltage/ primary circuit
What determines the line voltage sent to the step up transformer?
Autotransformer
On the x-ray circuit, where do you select your mA?
mA selector/ Rheostat
What is also referred to as a variable resistor?
mA selector/ Rheostat
What regulates amperage- regulates thermionic emission?
mA selector/ Rheostat
Where is the mA selector/ Rheostat located?
Low voltage-filament circuit
The step up transformer works off what type of induction?
mutual induction
How many wires does the step up transformer have?
2
On the step up transformer, what side has more turns?
secondary side
* think your stepping up more turns
The step up transformer increases volts to?
kilovolts
Do we need high or low volts to produce xrays?
high
The step down transformer has more turns on what side?
primary side
What 2 jobs does the step down transformer have?
Decreases voltage & Increases amperage
*TIP= That is why it is next to mA selector. The "A" in mA, and the "A" in amperage
The step down transformer works off what type of induction?
mutual induction
The step down transformer has how many wires?
2
Something that we have to hit before we get to our x-ray tube because the xray tube only works on D/C?
Rectifier
What changes A/C to pulsed D/C?
Rectifier
*TIP= it rectifies the problem
How many solid state semiconductors diodes does the rectifier have?
4
Is more voltage ripple good or bad?
bad
Single phase has what percentage ripple?
100%
3 phase, 6 pulse has what percentage ripple?
14%
3 phase, 12 pulse has what percentage ripple?
4%
High frequency has what percentage ripple?
-1%
Total heat produced during an x-ray expsure?
heat units
Tube housing is made to absorb certain levels of?
Heat units
What is the heat unit classification for single phase?
kVp X mA X s X 1
What is the heat unit classification for 3 phase, 6 pulse?
kVp X mA X s X 1.35
What is the heat unit classification for 3 phase, 12 pulse?
kVp X mA X s X 1.41
What is the heat unit classification for high frequency?
kVp X mA X s X 1.45
What provides extremely short exposure times by taking advantage of tube loading potential?
falling load generator
ex.) Lat T-spine w/ breathing technique we need something with short exposure times
What are 4 thing that we need to produce x-rays?
1.) Source of free electrons
2.) A means of acceleration
3.) A way to focus electrons
4.) A means to decelerate electrons
Where do we get free electrons?
thermionic emission
Filament coil heats up and is determined by?
mA
What side is the filament coil on, anode or cathode?
cathode (-)
A means for accelerating electrons is your tube potential, also known as?
kVp (energy)
What focuses electrons toward the anode (+) ?
focusing cup
What is a focusing cup made of?
molybdenum or nickel
Rapidly stopping electrons, also known as a sudden deceleration is done by the?
Anode (+)
What is the anode made of?
Tungsten or Rhenium