Geology — Test Review #3: Faults, Earthquakes, Rock Deformation, Mass Wasting, and Streams

0.0(0)
Studied by 0 people
call kaiCall Kai
learnLearn
examPractice Test
spaced repetitionSpaced Repetition
heart puzzleMatch
flashcardsFlashcards
GameKnowt Play
Card Sorting

1/29

flashcard set

Earn XP

Description and Tags

A complete set of 30 review flashcards covering faults, seismic waves, earthquakes, rock deformation, mass wasting, slope stability, and drainage systems.

30 Terms

1
New cards

What is the difference between a reverse fault and a thrust fault?

A reverse fault forms under compression with a relatively steep fault plane where the hanging wall moves upward relative to the footwall, whereas a thrust fault is a type of reverse fault with a low-angle fault plane (generally less than 45∘45^\circ).

2
New cards

How does rock movement differ between a strike-slip fault and a dip-slip fault?

In a strike-slip fault, rocks move horizontally past each other, whereas in a dip-slip fault, rocks move vertically (either upward or downward) along an inclined fault plane.

3
New cards

What is the difference between a left-lateral and a right-lateral strike-slip fault?

In a left-lateral strike-slip fault, the opposite side appears to move to the left, while in a right-lateral strike-slip fault, the opposite side appears to move to the right.

4
New cards

What is the difference between brittle deformation and ductile deformation in rocks?

Brittle deformation occurs when rock breaks or fractures when stress is applied, whereas ductile deformation occurs when rock bends or changes shape without breaking.

5
New cards

How do P-waves (Primary waves) propagate, and what mediums can they travel through?

P-waves are compressional body waves that move particles back and forth in the direction the wave travels, and they can travel through solids, liquids, and gases.

6
New cards

How do S-waves (Secondary waves) propagate, and what mediums can they travel through?

S-waves are shear body waves that move particles perpendicular to the direction the wave travels, and they travel through solids only.

7
New cards

How do Love waves and Rayleigh waves propagate along Earth's surface?

Love waves move the ground horizontally from side to side, whereas Rayleigh waves move the ground in a rolling, elliptical motion.

8
New cards

Which type of seismic wave arrives first at a seismic station, and which arrives last?

P-waves arrive first at a seismic station, and surface waves arrive last.

9
New cards

Which type of seismic wave travels the fastest, and which causes the most damage to buildings?

P-waves travel the fastest, while surface waves (particularly Love and Rayleigh waves) cause the most damage to buildings due to their strong ground motion.

10
New cards

What is the difference between a seismograph and a seismogram?

A seismograph is the instrument used to detect and record seismic waves, whereas a seismogram is the recorded tracing or graph of seismic waves produced by an earthquake.

11
New cards

What is the difference between the hypocenter (focus) and the epicenter of an earthquake?

The hypocenter (focus) is the location inside Earth where an earthquake begins, while the epicenter is the location on Earth's surface directly above the hypocenter.

12
New cards

How many seismic stations are required to locate the epicenter of an earthquake, and what is this method called?

33 seismic stations are required, and the process is called triangulation.

13
New cards

Where do shallow earthquakes occur compared to deep earthquakes?

Shallow earthquakes occur near Earth's surface at all types of plate boundaries, whereas deep earthquakes occur primarily at convergent boundaries in subduction zones where one plate sinks beneath another.

14
New cards

How much more energy does a magnitude 88 earthquake release than a magnitude 44 earthquake?

A magnitude 88 earthquake releases approximately 1,000,0001{,}000{,}000 times (one million times) more energy than a magnitude 44 earthquake.

15
New cards

What are the four bases used for long-term earthquake predictions?

They are based on historical earthquake records, patterns of past earthquakes, plate movement and fault activity, and recurrence intervals (how frequently earthquakes occur).

16
New cards

What is a seismic gap?

A section of an active fault that has not experienced a major earthquake in a long time compared with surrounding sections, considered a potential location for a future earthquake.

17
New cards

What primary event causes a tsunami, and what are other possible causes?

A tsunami is usually caused by an underwater earthquake that suddenly displaces a large amount of seawater; other possible causes include underwater landslides, volcanic eruptions, and meteorite impacts.

18
New cards

What is the difference between stress and strain in geology?

Stress is the force applied to a rock, whereas strain is the change in shape, size, or volume of the rock caused by that stress.

19
New cards

What specific rock movement or deformation is caused by tension, compression, and shear stresses?

Tension causes stretching or pulling apart, compression causes shortening or squeezing together, and shear causes rocks to slide past one another.

20
New cards

What is the difference between a joint and a fault?

A joint is a fracture or crack in rock where there has been no significant movement along the fracture, whereas a fault is a fracture in rock where movement has occurred.

21
New cards

How do anticlines and synclines differ in shape and the relative age of their rocks?

An anticline is an upward-arching fold with the oldest rocks generally found in the center, whereas a syncline is a downward-curving, trough-shaped fold with the youngest rocks generally found in the center.

22
New cards

What is the difference between a dome and a basin?

A dome is a circular or oval-shaped upward fold with the oldest rocks in the center, whereas a basin is a circular or oval-shaped downward fold with the youngest rocks in the center.

23
New cards

What is the difference between mass wasting and a landslide?

Mass wasting is the downhill movement of rock, soil, or other material due to gravity, whereas a landslide is a specific type of mass wasting involving the movement of rock and soil down a slope.

24
New cards

What six factors control slope stability?

Slope stability is controlled by slope angle, water content, vegetation, rock and soil strength, erosion, and added weight.

25
New cards

What are five methods used to minimize landslide hazards?

Landslide hazards can be minimized by grading, retaining walls, drainage systems, vegetation, and slope reinforcement.

26
New cards

What are the natural and human causes of landslide hazards?

Natural causes include heavy rainfall, earthquakes, volcanic activity, erosion, rapid snowmelt, and steep slopes; human causes include deforestation, construction, mining, excavation, and poor drainage systems.

27
New cards

What is the difference between base level and the gradient of a stream?

Base level is the lowest elevation to which a stream can erode its channel, while gradient is the slope or steepness of a stream measured by the change in elevation over a certain distance.

28
New cards

What characterizes a dendritic drainage pattern and where does it develop?

It looks like the branches of a tree and develops where the underlying rock or surface material has relatively uniform resistance to erosion.

29
New cards

How do radial, rectangular, and trellis drainage patterns differ?

In radial drainage, streams flow outward from a central high point; in rectangular drainage, streams follow fractures and joints with sharp 90∘90^\circ bends; in trellis drainage, main parallel streams are joined by tributaries at nearly right angles in alternating resistant and weak rock layers.

30
New cards

What is an oxbow lake and how does it form?

An oxbow lake is a crescent-shaped lake formed when a river cuts off a meander (a bend in the river), leaving the abandoned loop separated from the main channel.