1/8
Vocabulary flashcards covering thermoluminescent dosimeter (TLD) materials, optically stimulated luminescence (OSL) dosimetry, their properties, and operational processes.
Glow Curve
A graph that shows the relationship of light output to temperature change in thermoluminescent materials.
Lithium Fluoride (LiF)
The most widely used TLD material, considered a nearly tissue-equivalent radiation dosimeter; it has a density of 2.64×103kg/m3, an effective atomic number of 8.2, a main peak temperature of 195∘C, sensitivity as low as 50μGya (5mrad), accuracy better than 5%, and is principally used for patient and personnel dose monitoring.
Calcium Fluoride Activated with Manganese (CaF2:Mn)
A TLD material with a density of 3.18×103kg/m3, an effective atomic number of 16.3, a main peak temperature of 260∘C, and high sensitivity down to 10μGya (1mrad), principally used for environmental monitoring.
Lithium Borate (Li2B4O7:Mn)
A TLD material characterized by a density of 2.5×103kg/m3, an effective atomic number of 7.4, and a main peak temperature of 200∘C, principally used for research.
Calcium Sulfate (CaSO4:Dy)
A TLD material characterized by a density of 2.61×103kg/m3, an effective atomic number of 15.3, and a main peak temperature of 220∘C, principally used for environmental monitoring.
Optically Stimulated Luminescence Dosimeter (OSL)
A radiation dosimeter utilizing aluminum oxide (Al2O3) that offers higher sensitivity (10μGya / 1mrad), dose reanalysis capability, qualitative information on exposure conditions, a wide dynamic range, and excellent long-term stability compared to TLDs.
Aluminum Oxide (Al2O3)
The active material used in optically stimulated luminescence dosimeters (OSL).
Landauer
The developer credited with developing optically stimulated luminescence (OSL) dosimetry.
Process of Optically Stimulated Luminescence Dosimetry
A six-step sequence consisting of: 1. Irradiation of Al2O3, 2. Electrons stimulated to an excited state, 3. Laser light stimulation of these electrons during processing, 4. Relaxation of electrons to ground state caused by stimulation, 5. Emission of visible light, and 6. Measurement of the intensity of stimulated light emission.