1/171
Looks like no tags are added yet.
Physical Requirements
temperature, pH, osmotic pressure
Chemical Requirements
carbon, nitrogen, sulfur, and phosphorous, trace elements, oxygen, organic growth factors
psychrophiles
cold loving
can grow at 0’C, optimum growth at 15’C
live deep in oceans and in polar regions
Psychrotrophs
can frow at 0’C, optimum growth between 20’C and 30’C
mesophiles
moderate temperature loving
optimum growth at 25-40’C
normal microbiota and pathogens of animals
thermophiles
heat loving
optimum growth temperature of 50’C-60’C
found in hot springs and organic compost piles
hyperthermophiles
optimum growth temperature >80’C
pH that bacteria grow best between
pH 6.5-7.5
pH that molds and yeasts grow best between
pH 5 and 6
growth media in the laboratory may include
buffers to minimize pH changes
plasmolysis
hypertonic environments cause this occurrence (shrinkage of cell’s cytoplasm) as water moves out of the cell by osmosis
Acidophiles
grow in acidic environments
Extreme/obligate halophiles require
require high salt concentration (as high as 30% NaCl)
Facultative Halophiles
tolerate high salt concentration (2-10% NaCl)
Carbon
structural backbone of organic molecules
chemoheterotrophs use organic molecules as both carbon and energy sources
autotrophs use Co2 as their carbon source
Nitrogen
component of proteins, DNA and ATP
most bacteria decompose protein-containing material for the nitrogen source
some bacteria use NH4+ or NO3- from organic material
a few bacteria use N2 in nitrogen fixation
Sulfur
used in amino acids, thiamine, and biotin
most bacteria decompose protein for the sulfur source
some bacteria use SO4² or H2S
Phosphorus
used in DNA, RNA and ATP
found in membranes (phospholipids)
PO4³ is a source of phosphorus
Trace Elements
inorganic elements required in small amounts
used by cells as enzyme cofactors
include iron, copper, molybdenum and zinc
often provided by the tap water used to make laboratory media
Obligate aerobes
require oxygen
facultative anaerobes
able to grow with or without oxygen; grow via fermentation or anaerobic respiration when oxygen is not available
anaerobes
unable to use oxygen and most are harmed by it
Aerotolerant anaerobes
tolerate but cannot use oxygen
Microaerophiles
require oxygen concentration lower than air
organic growth factors
organic compounds obtained from the environment
vitamins, amino acids, purines, and pyrimidines
Biofilms
microbial communities
form slime or hydrogels that adhere to surfaces
bacteria communicate cell-to-cell via quorum sensing
bacteria secrete an inducer (signaling chemical) to attract other bacterial cells
share nutrients
shelter bacteria from harmful environment factors
Planktonic
refers to freely existing bacteria
as single cell, rather than enmeshed/attached to a biofilm
biofilms: bound in digestive system and sewage treatment systems; can clog pipes
1000x resistant to microbicides
involved in 70% of infections
catheters, heart valves, contact lenses, dental caries
Deep freezing
-50’C to -95’C
Lyophilization (freeze drying)
frozen -54’C to -72’C. and dehydrated in vacuum
Binary Fission
cell division process used by most bacteria
Budding
used by a few bacterial species
Conidiospores
actinomycetes
Generation Time
binary fission doubles the number of cells each generation
growth curves are represented logarithmically
Total number of cells
= 2^number of generations
Time required for a bacterial cell to divide
20 minutes- 24 hours
Bacterial Growth Curve
a few bacteria are inoculated into a liquid growth medium
the population of bacteria is counted at intervals
the log1- of the number of bacteria (y axis) is plotted versus time (x axis)
Phases of growth
lag phase, log phase, stationary phase, death phase
Lag phase
no or little increase in number
intense metabolic activity, “tooling up” for rapid growth
Log phase (exponential growth phase)
rapid reproduction, minimum constant generation time
Stationary Phase
growth slows as carrying capacity is approached,
cell deaths balances number of new cells
diminished nutrients, accumulating wastes
Death phase
deaths exceed production of new cells
population is decreasing logarithmically
Sepsis
refers to bacterial contamination
Asepsis
is the absence of significant contamination
Sterilization
removing and destroying all microbial life
Commercial sterilization
killing clostridium botulinum endospores in canned goods
Clostridium botulinum
rod shaped and produce endospores that are very resilient
Botulism
food borne disease, often via contaminated canned food
Disinfection:
destroying harmful microorganisms on inanimate surfaces or environments
Antisepsis
destroying harmful microorganisms from living tissue
Degerming
the mechanical removal of microbes from a limited area
Sanitization
lowering microbial counts on eating utensils to safe levels
Biocide (germicide)
treatments that kill microbes
Bacteriostasis
inhibiting (not killing) microbes
Effectiveness of treatment depends on
number of microbes
environment (organic matter, temperature, biofilms)
time of exposure
microbial characteristics (endospores, cell wall)
Actions of Microbial Control Agents
damage to plasma membrane
causes leakage of cellular contents
interferes with cell growth
Damage to proteins (enzymes)
damage to nucleic acids
Heat
denatures enzymes
Thermal death point
lowest temperature at which all cells in a liquid culture are killed in 10 min
Thermal death time
minimal time for all bacteria in liquid culture to be killed at a particular temperature
Decimal reduction time
minutes to kill 90% of a specific population of bacteria at a given temperature
Moist heat sterilization
moist heat coagulates/denatures proteins
Autoclave
steam under pressure
121’C at 15 psi for 15 min
kills all organisms (except prions) and endospores
steam must contact the item’s surface
preferred method for sterilization in health care environments
Pasteurization
reduces spoilage organisms and pathogens milk and juices
High temperature short time
72’C for 15 sec
Thermoduric
organisms survive, but are unlikely to cause disease or to spoil refrigerated milk
Ultra high temperature
will sterilize milk, creamer and juice which can then be stored without refrigeration
rapidly heated to 140’C for 4 seconds, followed by rapid cooling
Dry Heat Sterilization
kills by oxidation
flaming
incineration
hot-air sterilization
oven 170’C, 2 hours
Filtration
passage of substance through a screenlike material
used for heat sensitive materials
high efficiency particulate air filters (HEPA) remove microbe >0.3 µm
Membrane filters
remove microbes >0.22µm (slide 31 of lec 13)
Low temperature has bacteriostatic effect
refrigeration
deep freezing
lyophilization (freeze drying)
high pressure denatures proteins , alters carbohydrate structure
Desiccation
absence of water prevents metabolism
Ionizing radiation
creates reactive hydroxyl radicals
damages DNA by causing lethal mutations
used by food industry
sterilization of pharmaceuticals, disposable dental and medical supplies
Gamma rays as ionizing radiation
penetrate deeply but require hours to sterilize
High energy electron beams as ionizing radiation
less penetration, but fast
Nonionizing radiation (UV, 260nm)
Damages DNA by creating thymine dimers
UVC “germidical” lamps, used in hospital rooms, nurseries, operating rooms, cafeterias
Effective, but doesn’t penetrate; good for surfaces
Must avoid contact with eyes and skin
Visible blue light (470 nm)
kills a wide range of bacteria due to the formation of a singlet oxygen
Microwaves
kill by heat; not antimicrobial
Principles of Effective Disinfection
concentration of disinfectant, organic matter -often interferes with disinfection, pH, temperature, time
Use- Dilution Tests
standard for evaluating disinfectants
metal cylinders dipped in test bacteria and dried
cylinders placed in disinfectant for 10min at 20’C
cylinders transferred to culture media to determine whether the bacteria survived treatment
variations can be used to test effectiveness of antimicrobial agents against endospores, viruses, fungi and mycobacterium tuberculosis
Cylinders are placed in disinfectant for how long at what temp
placed for 10min at 20’C
Disk diffusion method
evaluates efficacy of chemical agents
filter paper disks are soaked in a chemical and placed on a culture
zone of inhibiton
Phenol and Phenolics
used by Joseph Lister to control surgical infections
injure lipids of plasma membranes causing leakage
remain active in presence of organic matter
Phenols derived from phenolics
reduced irritation, increased effectiveness
ex: lysol
Bisphenols
contain two phenol groups connected by a bridge
disrupt plasma membrane
ex: hexachlorophene, triclosan
Biguanides
effective against gram+ bacteria, many gram -, and enveloped viruses
disrupt plasma membranes
ex: chlorhexidine, alexidine
Chlorhexidine (biguanide)
used in surgical hand scrubs, preoperative skin preparations
Alexidine (biguanide)
works faster than chlorhexidine
Essential Oils
mixtures of hydrocarbons extracted from plants
used in traditional medicine/ food preservation
microbial action due to phenolics and terpenes
stronger against gram +
Halogens Iodine
impairs protein synthesis and alters membranes
tincture: solution in aqueous alcohol
iodophor: combines with organic molecules
povidone iodine, skin antisepsis
water treatment
Chlorine
oxidizing agents, shut down cellular enzyme systems
bleach: Hypochlorous acid (HOCl)
Chloramine: chlorine + ammonia
municipal water disinfection
Alcohols
denatures proteins and dissolves lipids
no effect on endospores and nonenveloped viruses
ethanol and isopropanol (require water)
alcohol based hand sanitizers
effective against most bacteria
not effective against endospore producers/nonenveloped viruses
not effective against: clostridium difficile or norovirus
Alcohols ALSO
denature proteins and dissolves lipids
have no effect on endospores and nonenveloped virusses
Oligodynamic action
very small amounts exert antimicrobial activity
Heavy Metals and Their Compounds (ag)
silver nitrate used to prevent ophthalmia neonatorum
silver impregnated wound dressings
Heavy Metals and Their Compounds (hg)
mercuric chloride: limited use as a distinfectant
Heavy Metals and Their Compounds (cu)
copper sulfate as an algicide/water disinfectant
Heavy Metals and Their Compounds (zn)
Zinc chloride found in mouthwash
Acid anionic sanitizers degerming; emulsification
anions react w/ plasma membrane
use for cleaning food processing facilities
Quaternary ammonium compounds (quats)
cations are bactericidal, denature proteins, disrupt plasma membrane
relatively broad spectrum, except ineffective against endospores and mycobacteria
Sulfur dioxide
prevents wine spoilage
Organic acids
inhibit metabolism
sorbic acid, benzoic acid, and calcium propionate prevent molds in some foods