Other People Exam 3 354

0.0(0)
Studied by 0 people
call kaiCall Kai
learnLearn
examPractice Test
spaced repetitionSpaced Repetition
heart puzzleMatch
flashcardsFlashcards
GameKnowt Play
Card Sorting

1/71

encourage image

There's no tags or description

Looks like no tags are added yet.

72 Terms

1
New cards

Which of the following factors contributes significantly to the compressive strength of concrete masonry units (CMUs)?

Type of aggregate used

2
New cards

When discussing the stiff-mud molding technique, what equipment is used in extrusion molding to form continuous lengths of clay that are then cut into bricks?

Die

3
New cards

A new mason has been given the task to tool the joints of a 2-story admin building. He is looking up on the internet all of the different tooling options. The lead brick mason has told him, "make sure you tool it so the water does not get trapped in the joint." Which of the options below would be the best option given the circumstances?

Concave

4
New cards

What is the purpose of damp-proofing in masonry construction?

To prevent water from seeping into the masonry wall

5
New cards

What stage of the brick manufacturing process is critical for achieving consistent quality and durability?

Firing

6
New cards

Which type of lime is preferred for mortar in masonry construction due to its ability to provide flexibility and self-healing properties?

Hydraulic Lime

7
New cards

Which classification is typically used for solid clay bricks suitable for general use in construction?

FBS

8
New cards

The load-bearing capacity of a masonry wall depends primarily on:

Wall thickness and reinforcement

9
New cards

What type of mortar is generally recommended for use in below-grade masonry applications?

Type M

10
New cards

Which of the following materials is not recommended to use for a metal masonry flashing?

Aluminum

11
New cards

What is the purpose of using expansion joints in masonry construction?

Allow for expansion and contraction due to temperature changes

12
New cards

What is efflorescence in masonry, and how is it caused?

White powdery deposit caused by soluble salts and moisture

13
New cards

When renovating an Historic facility, what type of mortar would most likely be used?

Lime Mortar

14
New cards

Which additive is commonly used in mortar to improve workability and water retention without compromising strength?

Plasticizers

15
New cards

A brick mason is training a new worker on his crew. They have started laying out the leads for a 2-story admin building. They have laid out the wall and there is exactly 8 bricks that lay out to be 64". What type of brick would this be considered?

Modular Brick

16
New cards

In reinforced masonry walls, what is the purpose of horizontal joint reinforcement?

Correct answer:

Resist lateral forces and prevent cracking

17
New cards

When discussing thermal insulation behind masonry units, why is it important to minimize thermal bridging in the building envelope?

To reduce energy loss and lower heating/cooling costs

18
New cards

Which type of mortar mix is generally recommended for interior non-loadbearing masonry applications?

N

19
New cards

What would the below brick bond be classified as:

English Bond

<p>English Bond</p>
20
New cards

Which type of mortar mix is generally recommended for interior non-loadbearing masonry applications?

Type N

21
New cards

What is the purpose of weep holes in masonry walls?

To allow moisture to drain out

22
New cards

Which material is commonly used as a flashing to prevent water penetration in masonry construction?

Copper

23
New cards

An architect is designing a building in New York City, they have reached out to brick manufacturers to determine what brick grade would be needed for those weathering conditions. What would be the answer that is given to meet the freeze/thaw conditions?

SW

24
New cards

How does the process of pointing contribute to masonry maintenance?

Protects against water penetration and enhances aesthetics

25
New cards

When a mason starts the construction of a brick wall - they typically build the corners first (In a triangular shape). What are these sections called?

Leads

26
New cards

What is the purpose of a plumb bob in masonry?

To ensure vertical alignment

27
New cards

An architect has decided that he wants to build a High School, and early in his design decisions he decided that he wants to have a brick façade. This brick façade will use non-uniform bricks as an architectural feature - he wants the building to have some character. What brick type would be used to meet the architects wants?

FBA

28
New cards

A project engineer for a large general contractor has been tasked with procuring the submittals for the load-bearing cold-formed metal stud framing. What specification section should they be reviewing?

05 40 00

29
New cards

When discussing the type of Mortar, what is the strongest type and what is the weakest type?

Type M, Type O

30
New cards

How does the use of locally sourced masonry materials contribute to sustainable construction practices?

Reduces transportation emissions

31
New cards

When discussing brickwork terminology, the joint located between the two wythes is called?

Collar Joint

32
New cards

Which component of mortar primarily contributes to its initial binding properties?

Cement

33
New cards

Which type of reinforcement is typically embedded within concrete masonry units (CMUs) to resist tensile forces?

Vertical rebars

34
New cards

What is the purpose of adding lime to mortar used in masonry construction?

Enhance Workability

35
New cards

What type of block can the aggregate color be specifically chosen to provide a different look when manufactured?

Ground-Face Block

36
New cards

What is the purpose of adding lime to mortar mixes?

Improve workability and bond strength

37
New cards

In masonry terminology, what does "header" refer to?

A brick laid with its end facing outwards

38
New cards

A brick manufacturer has learned that an entire brick run has failed a quality control check to meet aesthetic requirements for a multi-wythe project. This brick will now need to be used in concealed conditions. What would this brick be classified as?

Building brick

39
New cards

When discussing the methods of molding bricks, the "sand struck" method was described where the mold is encased in sand so the clay does not stick to the mold. What type of molding process is this considered to be apart of?

Soft Mud Process

40
New cards

What is the type of wall called when building a stone wall where the stones are square in shape and do not follow any type of coursing pattern?

Random Ashlar

41
New cards

What molding technique is typically used when there are known clays that have a tendency to shrink when they are dried?

Dry-Press Process

42
New cards

How does the process of pointing contribute to masonry maintenance?

Protects against water penetration and enhances aesthetics

43
New cards

What is the primary difference between an air barrier and a vapor barrier?

Air barriers control air leakage, while vapor barriers control moisture diffusion

44
New cards

Which of these is not a SECONDARY function of the building enclosure?

Keeping Water Out

45
New cards

An effective air barrier must meet which of the following criteria?

Continuous, durable, impermeable to air, and maintainable

46
New cards

Which of the following is not a primary function of an envelope system?

Reduce the Amount of Light

47
New cards

What is efflorescence in masonry, and how is it caused?

Correct answer:

White powdery deposit caused by soluble salts and moisture

48
New cards

An air barrier must be located on the warm side of a building envelope to be effective.

Correct answer:

False

49
New cards

What type of block can the aggregate color be specifically chosen to provide a different look when manufactured?

Ground-Face Block

50
New cards

What type of mortar is generally recommended for use in below-grade masonry applications?

Type M

51
New cards

When a mason starts the construction of a brick wall - they typically build the corners first (In a triangular shape). What are these sections called?

Leads

52
New cards

An architect is designing a building in Oklahoma, they have reached out to brick manufacturers to determine what brick grade would be needed for those weathering conditions. He was told by the brick manufacturer that the freeze/thaw is not a severe issue, but there may be minor cases of weather. What brick grade would be needed for this location?

MW

53
New cards

How does the use of locally sourced masonry materials contribute to sustainable construction practices?

Reduces transportation emissions

54
New cards

What is the purpose of weep holes in masonry walls?

To allow moisture to drain out

55
New cards

In reinforced masonry walls, what is the purpose of horizontal joint reinforcement?

Resist lateral forces and prevent cracking

56
New cards

Which component of mortar primarily contributes to its initial binding properties?

Cement

57
New cards

Which type of lime is preferred for mortar in masonry construction due to its ability to provide flexibility and self-healing properties?

Hydraulic Lime

58
New cards

Which one of these is not a PRIMARY function of a building enclosure?

Control the Passage of Sound

59
New cards

Which of the following is a common test used to measure the effectiveness of an air barrier?

Blower Door Test

60
New cards

What is the purpose of damp-proofing in masonry construction?

To prevent water from seeping into the masonry wall

61
New cards

What would the below brick bond be classified as:

English Bond

<p>English Bond</p>
62
New cards

Which type of building construction benefits the most from air barrier systems (specifically for the "Wind" pressure)?

High-Rise Buildings

63
New cards

When providing joint sealant within a three sided joint (where there is a solid structure within the cavity on the back side of the joint) - what needs to be put in place to ensure a quality sealant joint?

Bond Breaker

64
New cards

When discussing the methods of molding bricks, the "water struck" method was described where the mold is dosed in water so the clay does not stick to the mold. What type of molding process is this considered to be apart of?

Correct answer:

Soft Mud Process

65
New cards

When discussing brickwork terminology, the joint located between the two wythes is called?

Collar Joint

66
New cards

Which of the following factors contributes significantly to the compressive strength of concrete masonry units (CMUs)?

Type of aggregate used

67
New cards

When discussing thermal insulation behind masonry units, why is it important to minimize thermal bridging in the building envelope?

To reduce energy loss and lower heating/cooling costs

68
New cards

In masonry terminology, what does "header" refer to?

A brick laid with its end facing outwards

69
New cards

What is a commonly used to keep excess mortar put of the cavity?

Mortar Net that catches the excess materials

70
New cards

Which of the following materials is not recommended to use for a metal masonry flashing?

Aluminum

71
New cards

Which of the following is not one of the ways air leakage can occur in a building?

Atmospheric Pressure

72
New cards

Which type of mortar mix is generally recommended for interior non-loadbearing masonry applications?

Type O