1/182
Vocabulary practice cards matching key aerospace structures, mechanics, materials, regulatory standards, and CAD/FEA terms to their exact definitions.
Airframe
Structural framework of an aircraft, including fuselage, wings, and tail.
Fuselage
Main aircraft body housing passengers, crew, and cargo.
Frame
Transverse fuselage structural member that maintains shape and distributes loads.
Stringer
Longitudinal stiffener supporting the skin and resisting bending and buckling.
Longeron
Major longitudinal member that carries loads along an aircraft.
Bulkhead
Structural partition that separates sections or transfers loads.
Pressure bulkhead
Structural wall closing off a pressurized fuselage section.
Aircraft skin
Exterior shell that shapes the aircraft and carries structural loads.
Semi-monocoque structure
Construction where skin, frames, and longitudinal stiffeners share loads.
Monocoque structure
Construction in which the outer shell carries most structural loads.
Floor beam
Transverse member supporting cabin flooring and transferring loads to the fuselage.
Floor panel
Cabin floor surface supported by beams and other structural elements.
Spar
Main spanwise wing member resisting bending and shear.
Rib
Member that maintains wing shape and helps distribute loads.
Fitting
Hardware transferring forces between connected structural parts.
Bracket
Structural support or connection for another component.
Empennage
Aircraft tail assembly, including stabilizing surfaces.
Primary structure
Load-bearing structure critical to aircraft structural integrity.
Secondary structure
Structure outside the principal load-bearing system but still safety-regulated.
Seat track
Floor-mounted structural rail that secures seats and transfers their loads.
Seat fitting
Hardware connecting a passenger seat to its track.
Seat pitch
Distance between matching reference points of successive seat rows.
Seat restraint system
Belts and related devices that restrain passengers during specified conditions.
Overhead stowage bin
Compartment securing carry-on luggage during flight.
Bin support bracket
Hardware transferring stowage bin loads to supporting airframe structure.
Hinge
Joint allowing a bin door or panel to rotate.
Latch
Device holding a panel, bin door, or compartment closed.
Cabin monument
Installed unit such as a galley, lavatory, closet, or partition.
Galley
Airplane food-service and storage area.
Lavatory module
Integrated cabin restroom assembly.
Partition
Panel separating cabin areas.
Closet module
Built-in stowage assembly for clothing or other items.
In-flight entertainment (IFE)
Passenger media, information, and entertainment systems.
IFE mounting bracket
Attachment securing a screen or other IFE equipment.
Cable routing
Planned paths of electrical wiring and cables through components.
Passenger service unit (PSU)
Overhead assembly with items such as reading lights and air outlets.
Ceiling panel
Interior lining that conceals overhead structure and systems.
Sidewall panel
Cabin lining that covers fuselage interiors.
Access panel
Removable panel allowing maintenance or inspection.
Emergency exit clearance
Unobstructed space necessary to use emergency exits.
Cabin integration
Ensuring interior parts and systems fit and function together.
Interface
Connection or interaction between components or systems.
Envelope
Defined spatial boundary available for component placement or operation.
Clearance
Required gap preventing interference and supporting maintenance or movement.
Load
Force or moment applied to a structure.
Load path
Route forces take through parts and joints to the supporting structure.
Free-body diagram (FBD)
Isolated sketch showing external forces, moments, and reactions.
Equilibrium
State where the sums of forces and moments are zero.
Reaction force
Force imposed on a body by its support or constraint.
Moment
Turning effect of a force about a point or axis.
Torque
Moment that twists a member about its longitudinal axis.
Tension
Pulling load that tends to elongate a component.
Compression
Pushing load that tends to shorten a component.
Shear force
Internal or external transverse force across a section.
Bending moment
Internal moment tending to bend a structural member.
Normal stress
Force per unit area acting perpendicular to a surface.
Shear stress
Force per unit area acting parallel to a surface.
Strain
Relative deformation of a material.
Young's modulus (E)
Elastic stiffness measure relating uniaxial stress to strain.
Shear modulus (G)
Elastic stiffness measure relating shear stress to shear strain.
Poisson's ratio
Negative transverse-to-axial strain ratio under uniaxial loading.
Stiffness
Resistance of a material or component to deformation.
Strength
Ability to resist a specified failure condition.
Deflection
Displacement of a structural member under load.
Second moment of area (I)
Section geometry property governing elastic resistance to bending.
Section modulus
Section property relating bending moment to maximum bending stress.
Neutral axis
Line in a beam section with zero longitudinal stress under simple bending.
Buckling
Loss of structural stability, often caused by compression.
Fatigue
Progressive damage caused by repeated or cyclic loading.
Stress concentration
Localized stress increase near a hole, notch, or geometry change.
Stress riser
Feature that causes localized elevated stress.
Vibration
Oscillatory motion of a component or structure.
Natural frequency
Frequency of free vibration of a system.
Resonance
Elevated dynamic response near a natural frequency.
Yielding
Onset of significant plastic deformation under loading.
Fracture
Separation of material following crack growth or other failure.
Shear failure
Structural failure due to excessive shear demand.
Bearing failure
Local crushing or deformation at a loaded contact area.
Net-section failure
Tensile failure across the remaining section near a hole.
Tear-out failure
Material tearing from a fastener hole toward a free edge.
Fastener pull-out
Fastener being extracted from material or its anchorage.
Fastener pull-through
Fastener head or washer passing through attached material.
Delamination
Separation of layers within a laminate.
Core crushing
Compressive damage to a sandwich panel core.
Creep
Time-dependent deformation under sustained stress.
Corrosion
Chemical or electrochemical deterioration of material.
Wear
Material loss or damage from surface interaction and motion.
Aluminum alloy
Lightweight metallic material widely used in airframe structures.
Composite material
Material combining constituents to achieve tailored properties.
Carbon-fiber reinforced polymer (CFRP)
Composite of carbon fibers in a polymer matrix.
Glass-fiber reinforced polymer (GFRP)
Composite using glass reinforcement in a polymer matrix.
Sandwich panel
Panel with stiff facesheets separated by a lightweight core.
Honeycomb core
Cellular core providing panel depth and stiffness at low mass.
Facesheet
Outer sandwich layer carrying much of the bending-related normal stress.
Laminate
Composite built from multiple bonded layers.
Ply
Individual layer in a composite laminate.
Fiber orientation
Direction of reinforcing fibers affecting composite properties.
Isotropic material
Material having the same properties in every direction.
Anisotropic material
Material whose properties differ by direction.
Thermoplastic
Polymer that softens upon heating and can generally be remolded.