1/36
Comprehensive vocabulary flashcards covering urban atmospheric layers, microclimates, the surface energy balance, urban heat island dynamics, greenspace cooling, local airflow regimes, and urban air pollution mechanisms.
Urban Boundary Layer (UBL)
The lowest 1,000–2,000m of the troposphere situated above a city, representing the primary vertical atmospheric zone where urban ecology and human development interact.
Urban Canopy Layer
The lowest sublayer of the urban atmosphere extending from the ground surface up to the average level of building rooftops and tree crowns, dominated by streamline, turbulent, and vortex airflows governed by microscale structures.
Roughness Urban Boundary Layer
The transitional layer of air located directly above the urban canopy layer characterized by substantial turbulence and eddies, where pollutants vented from the canopy layer accumulate.
Surface Troposphere (Upper UBL)
The layer overlying the roughness layer where regional streamline airflow dominates and windspeed increases logarithmically with altitude.
Airdome
A dome of heat, suspended particles, aerosols, and gases of varying thickness blanketing an urban area, exhibiting peaks over high-rise city centers and industrial corridors and dips over vegetated parks, forests, and water bodies.

Four Drivers of Airdome Height
The four physical characteristics determining the vertical extent of an urban airdome: surface roughness (frictional resistance of buildings and trees),
aspect ratio (building height relative to building spacing),
percentage of hard surface (impervious vs. vegetated cover), and
pollutant source intensity (volume of heat and emissions).
Temperature Inversion Cap
A meteorological condition in which a layer of warm air rests above cooler urban air, suppressing vertical mixing and sealing off upward ventilation so that heat and pollutants accumulate and spread outward beneath it.

Urban Microclimate Systematic Shifts
Five characteristic microclimatic contrasts in cities relative to surrounding rural areas: radiation (25–90% less UV, 1–25% less solar, 5–40% greater infrared input), heat (1–3∘C higher mean annual temperature), moisture (50% less evapotranspiration), airflow (10–50% greater turbulence, 5–30% lower ground windspeed), and sky conditions (diminished visibility and increased downwind cloudiness).
Surface Energy Balance Equation
The fundamental thermodynamic equation governing urban surface energy exchanges: Q∗+QF=QH+QE+ΔQS+ΔQA, which balances net all-wave radiation (Q∗) and anthropogenic heat (QF) against sensible heat (QH), latent heat (QE), storage (ΔQS), and advection (ΔQA).
Net All-Wave Radiation (Q∗)
The net balance of incoming and outgoing short-wave and long-wave radiant energy; although slightly lowered in cities due to atmospheric particulate pollution, it remains the dominant daytime energy flow.
Sensible Heat Flux (QH)
The heat transfer that directly alters air temperature and can be felt as thermal warmth; it peaks around 200–300W/m2 in built environments and drives daytime warming.
Latent Heat Flux (QE)
The thermal energy absorbed and dissipated through the phase change of water during evaporation and plant transpiration, cooling the underlying surface without raising ambient air temperature.
Thermal Storage (ΔQS)
The net absorption of daytime heat by dense impervious urban fabric (concrete, stone, asphalt, steel) and its nocturnal upward reradiation, constituting the single largest driver of the nocturnal urban heat island.
Advective Heat Flux (ΔQA)
The horizontal atmospheric transfer of thermal energy between adjacent urban land uses (such as cool park air drifting into built streets), which operates locally across distances of 500–1,500m but exerts negligible impact on overall citywide heat island magnitude.
Anthropogenic Heat (QF)
Thermal energy discharged directly into the urban atmosphere by human machinery, combustion, transportation, and building conditioning; while often 2–30W/m2 citywide, it reaches 1,000–1,500W/m2 in winter office cores and can raise urban canyon nighttime temperatures by 1∘C–1.5∘C from exterior air conditioning condenser exhausts.
Sky View Factor (SVF)
The fraction of the visible sky hemisphere open to the sky from a specific observation point on the ground; low values in narrow building-lined street canyons reduce daytime radiation reception while trapping outgoing long-wave radiation at night.
Corridor of Shade
A linear ground shadow cast by parallel building facades or continuous tree canopies that drastically curtails direct solar irradiation reaching pedestrian pavement.
Wavelength Shift
The physical process in which urban materials absorb short-wave solar radiation (<3μm) and reradiate that energy at longer infrared wavelengths (>3μm), which are readily absorbed and trapped by atmospheric greenhouse gases (H2O, CO2, CH4, O3).
Radiation Trapping
The multiple reflections of incoming solar radiation back and forth between tall, facing building facades before it can escape upward, which lowers the effective bulk albedo of the street canyon and heightens total thermal energy absorption.
Urban Heat Island (UHI)
A built urban environment exhibiting systematically elevated air temperatures relative to adjacent rural or non-urban baselines, with intensity calculated as the difference between the warmest urban point and a comparable rural station.
Urban Heat Island Profile
The spatial cross-section of ambient nocturnal temperatures across an urban region, characterized by sharp thermal peaks over dense central business districts (e.g., 23∘C) and notable cool depressions over extensive parks and rural fringes (19∘C–20∘C).

Cooling by Greenspace (Berlin Study)
Empirical cooling thresholds identified across 42 urban greenspaces on calm summer evenings: small greenspaces (<30ha) cool by approximately 1∘C, medium greenspaces (30–500ha) by 3∘C, and large greenspaces (>500ha) by 5∘C, with measurable advective cooling extending 1,500m downwind.
Surface Albedo
The ratio of reflected to incident electromagnetic solar radiation expressed as a percentage, ranging from high values in fresh snow (85%) and concrete (25%) to low values in fresh asphalt (13%), coniferous forests (12%), and surface water (∼7%).
Cool-Air Drainage
A gravity-induced nocturnal air movement where dense, cold air generated over high, vegetated terrain flows downslope into lower urban valleys, displacing warm polluted air and providing passive ventilation and cleaning (exemplified in Stuttgart, Germany).
Breeze from the Country / Park
A local thermal circulation generated when air warmed by impervious surfaces rises over the city core, dropping local surface barometric pressure and drawing in cooler, denser air from adjacent rural land or large urban parkland.
Windbreak Airflow Zones
The distinct microclimatic aerodynamic zones created by a shelterbelt or wall of height H, including an upwind velocity reduction extending 3–6×H, a protected downwind 'quiet zone' extending roughly 8×H, and a downwind turbulent 'wake zone' continuing for another 15–25×H.
Skimming Flow
An airflow regime that occurs over building arrays or street canyons with a height-to-width ratio (H/W) of 1.0 or less, where main atmospheric streamlines travel smoothly across rooftops with minimal street-level air penetration.

Street Canyon Vortex
A continuous circulating air eddy generated beneath roof level when wind flows perpendicular to a street canyon with a height-to-width ratio (H/W) of 2.0 or greater.
Street-Corner Eddy
A vertical, turbulent vortex created at the intersection where two deep street canyons meet, separating airflow around building corners and generating localized high ground windspeeds.
Direction of Surface Airflow Correction
The physical correction stating that while radiant heat moves from warm to cool surfaces, convective surface air moves from cool to warm because ascending warm air lowers localized surface barometric pressure and pulls cooler surrounding air in beneath it.
Tropospheric Ozone (O3 / Smog)
A harmful secondary air pollutant formed not through direct emission, but via photochemical reactions between nitrogen oxides (NOx) and volatile organic compounds (VOCs/hydrocarbons) under heat and intense solar ultraviolet radiation.
Vehicle Speed-Pollution Relationship
The operational traffic dynamic wherein emissions of carbon monoxide (CO) and hydrocarbons (VOCs) are highest during stop-and-go driving at speeds below 24km/h (15mph), while nitrogen oxide (NOx) emissions peak during high-speed travel exceeding 80km/h (50mph).
urban and non-urban air differences
Radiation (less uv and solar. more infrared), Moisture (low humidity daytime, less evaporation), flow (low wind speed, and greater turbulance), higher temperature, weather condition more fog
Regional wind tends to clean and cool urban a. Describe how regional wind changes with different temperature forms

Three layers of airs and their features
troposphere high wind speed, Roughness Urban boundaries layer (lowest 1,000-2,000 m of the troposphere. This is where urban ecology mostly plays out and accumulates ucl’s pollutants), Urban canopy layer boundaries set by urban mass and tree
Condition changing radiation distribution in urban space 影響都市氣候與熱能傳遞的四個核心要素
angle, tilted or not decide how the radiation spreads out
canopy,
Short wavelength (UV….captured by O3, rereleased in long wavelength with heat from concrete buildings),
long wavelength (Infrared —> heat… captured by CO2, H2O),
Sky view factor
Wavelength shift: creates greenhouse gases