Complete Denture Delivery Exam Review

0.0(0)
Studied by 0 people
call kaiCall Kai
learnLearn
examPractice Test
spaced repetitionSpaced Repetition
heart puzzleMatch
flashcardsFlashcards
GameKnowt Play
Card Sorting

1/23

flashcard set

Earn XP

Description and Tags

High-yield prosthodontics practice flashcards for complete denture delivery, focusing on clinical evaluation, seating, occlusal corrections, phonetics, and patient education based on Dr Ntapu's lecture.

24 Terms

1
New cards

What five checks or procedures must be performed before inserting a newly processed complete denture into a patient's mouth?

  1. Examine the fitting surface for acrylic bubbles and rough areas. 2. Remove acrylic nodules using a Kingsley scraper or sharp instrument. 3. Inspect the denture for processing defects that could cause discomfort. 4. Check that the denture surfaces are smooth and suitable for insertion. 5. Have finished dentures and remount casts assessed by the supervisor where required.
2
New cards

Why must small acrylic nodules on the fitting surface of a newly processed denture be removed prior to insertion?

Acrylic nodules create localized pressure points that exert excessive pressure on underlying mucosa, causing pain, inflammation, and ulceration. They can also prevent complete seating of the denture.

3
New cards

What are the clinical applications of a pressure-indicating paste (PIP), Kingsley scraper, articulating paper, acrylic bur, and Willis gauge during complete denture delivery?

PIP detects excessive pressure on the fitting surface; Kingsley scraper removes acrylic bubbles and nodules; Articulating paper identifies premature occlusal contacts; Acrylic bur relieves excessive pressure areas and overextensions; Willis gauge assists in evaluating the vertical dimension.

4
New cards

How should an anxious first-time denture wearer who expects to eat normally immediately be managed during delivery?

  1. Explain that delivery begins the patient adaptation process. 2. Reassure the patient that initial speech and chewing difficulties may occur. 3. Explain that oral muscles require time to adapt. 4. Provide clear insertion, removal, and care instructions. 5. Encourage follow-up appointments if discomfort develops.
5
New cards

What is the procedure for using pressure-indicating paste (PIP) to assess and relieve excessive pressure areas on a maxillary denture?

Apply a thin layer of PIP to the fitting surface, fully seat the denture with slight pressure in the molar regions, identify excessive pressure where acrylic shines through or PIP is displaced, relieve these areas using an acrylic bur removing minimal material, and repeat until even contact is achieved.

6
New cards

What is the likely cause and corrective action if a maxillary denture dislodges whenever the patient smiles or moves their upper lip?

The likely cause is overextension of the labial flange or inadequate frenal relief. Correction involves examining the labial vestibule and frenum during lip movement, identifying interfering areas, shortening the overextended flange or relieving the frenum with an acrylic bur, and reassessing retention and stability.

7
New cards

Why is the posterior palatal seal (PPS) essential to evaluate when a maxillary denture fits comfortably but exhibits poor retention?

The PPS maintains an effective posterior border seal by maintaining appropriate contact with the soft palate. Without proper contact, air enters beneath the denture, compromising the seal and reducing retention.

8
New cards

What specific recommendation does the lecture provide for correcting a maxillary denture flange that extends into the full depth of the vestibule?

The lecture recommends shortening the overextended flange incrementally to approximately 2 mm2\,\text{mm} short of the vestibular depth to avoid interfering with muscle movements, mucosal soreness, and denture displacement.

9
New cards

What factors should be evaluated if a newly inserted maxillary complete denture is stable but the dental midline appears displaced?

Confirm the denture is fully seated, check the dental midline against the facial midline, evaluate the occlusal plane for canting, assess facial appearance and aesthetics, and determine whether prosthetic correction is required before completing delivery.

10
New cards

What is the likely cause and clinical management if a mandibular complete denture lifts whenever the patient elevates or moves their tongue?

The likely cause is overextension of the lingual flange. Management involves asking the patient to elevate and lateralize the tongue, identifying interfering areas along the lingual border, carefully relieving the flange using an acrylic bur, and reassessing stability during functional tongue movements.

11
New cards

Why must the mentalis muscle region and retromolar pad area be carefully evaluated during mandibular complete denture insertion?

These areas are susceptible to overextension during impressions. Mentalis region overextension interferes with lower lip movement, while excessive retromolar pad extension causes posterior discomfort. Both can cause muscle-induced denture displacement.

12
New cards

Why should a clinician avoid immediately grinding mandibular denture areas where PIP paste has been removed during insertion?

Absence of PIP may occur when the denture brushes against the residual ridge during insertion or removal rather than from genuine tissue pressure. The clinician must distinguish accidental displacement from true pressure areas before grinding acrylic.

13
New cards

Why must complete denture occlusion be verified at delivery even if it was correct at the wax try-in stage?

Denture processing and flasking distortions can alter original tooth relationships, creating premature occlusal contacts and interferences that disrupt balanced occlusion.

14
New cards

How should a patient be guided into a reproducible closing position during occlusal checks, and what instruction must be avoided?

Ensure dentures are fully seated, ask the patient to close slowly, instruct them to stop at the first tooth contact, and repeat to confirm consistency. Avoid instructing the patient to 'bite hard', as this encourages protrusive closure rather than centric relation.

15
New cards

What does an isolated dark articulating paper contact on a single posterior tooth indicate, and how should it be corrected?

It indicates a premature occlusal contact that can cause uneven occlusal forces and instability. It is corrected by confirming denture seating, verifying the contact with repeated closure, and selectively grinding fossae and marginal ridges until small, even contacts are achieved.

16
New cards

Why should fossae and marginal ridges be adjusted instead of cusp tips during selective grinding in centric occlusion?

Grinding fossae and marginal ridges preserves cusp height, which maintains the established vertical dimension. Contacts on flatter surfaces also reduce sliding or displacement forces on the dentures.

17
New cards

What is the B.U.L.L. rule and how is it applied during occlusal adjustment of complete dentures?

B.U.L.L. stands for Buccal Upper, Lingual Lower. During lateral mandibular excursions, interferences are relieved by grinding the buccal cusp slopes of maxillary posterior teeth and the lingual cusp slopes of mandibular posterior teeth, while preserving cusp tips to maintain vertical dimension.

18
New cards

How are two different colors of articulating paper utilized during complete denture occlusal correction?

Red articulating paper marks centric contacts, while blue articulating paper marks excursive contacts. Comparing markings differentiates static from dynamic occlusion and identifies premature contacts or interferences.

19
New cards

Why is it undesirable for a maxillary palatal cusp to contact an inclined plane rather than the central fossa of a mandibular tooth?

Contacts on inclined surfaces generate horizontal forces that encourage denture sliding or displacement, whereas contact in the central fossa provides a stable occlusal relationship that minimizes unwanted denture movement.

20
New cards

Which phonetic sounds are assessed by having the patient count from 50 upwards, count from 60 upwards, and pronounce B, P, and M?

Counting from 50 upwards evaluates F, V, and Ph sounds (labiodental sounds and anterior tooth position); counting from 60 upwards evaluates S sounds (sibilants, tongue space, vertical relationship); B, P, and M evaluate lip contact and lip support.

21
New cards

What is the clinical significance of complete denture teeth clicking together during speech?

Clicking indicates inadequate freeway space, typically caused by an excessive occlusal vertical dimension (OVD). It requires assessing the rest vertical dimension, OVD, and freeway space.

22
New cards

What five potential factors should be considered if a patient develops a lisp immediately after insertion of complete dentures?

  1. Poor denture fit affecting stability. 2. An excessively narrow dental arch form. 3. Excessively thick palatal acrylic. 4. An incorrect vertical dimension. 5. Insufficient tongue space during speech.
23
New cards

What six key post-insertion instructions must be provided to a first-time complete denture patient?

  1. Adaptation: Explain chewing and speaking require practice. 2. Diet: Begin with soft foods and small bites. 3. Food avoidance: Initially avoid hard and sticky foods. 4. Hygiene: Clean dentures regularly to prevent plaque accumulation. 5. Night removal: Remove dentures at night to rest oral tissues. 6. Follow-up: Return for adjustment if persistent pain, soreness, or instability develops.
24
New cards

Why are nocturnal denture removal and regular denture hygiene essential for long-term clinical success?

Night removal allows the denture-bearing mucosa to rest and recover, while regular cleaning eliminates food debris and plaque, reducing the risk of denture stomatitis and promoting long-term oral tissue health.