Yay new CAE Exam 2 set

0.0(0)
Studied by 0 people
call kaiCall Kai
learnLearn
examPractice Test
spaced repetitionSpaced Repetition
heart puzzleMatch
flashcardsFlashcards
GameKnowt Play
Card Sorting

1/65

encourage image

There's no tags or description

Looks like no tags are added yet.

66 Terms

1
New cards
Graphical share of engineering design process
Roughly 92% graphically based (3-D modeling/documentation, manufacturing engineering, functional design, engineering analysis), with ~8% split across math, written/verbal communication, and other tasks
2
New cards
Engineering sketch vs. detail drawing
Sketch shows principal dimensions with no tolerances, no drawing/revision number, or Drawn/Approved by; detail drawing shows all dimensions and tolerances plus a title block (drawing/revision number, Drawn by, sometimes Approved by)
3
New cards
Primary differences between a sketch and a detail drawing
Tolerances and format
4
New cards
Standard inch drawing sizes
A (8.5 x 11), B (11 x 17), C (17 x 22), D (22 x 34), E (34 x 44)
5
New cards
Standard metric drawing sizes (mm)
A4 (210 x 297), A3 (297 x 420), A2 (420 x 594), A1 (594 x 841), A0 (841 x 1189)
6
New cards
Multiview projection
Orthogonal projection projected at 90 degrees
7
New cards
Axonometric projection
Rotated about one or more axes; includes Isometric (120 deg / 30 deg), Dimetric, and Trimetric
8
New cards
ANSI (Third Angle) projection layout
US convention (use on course drawings); Front is key view, Top is above Front, Right is right of Front, Left is left of Front, Bottom is below Front
9
New cards
ISO (First Angle) projection layout
European/world convention; Top is below Front, Right is left of Front, Left is right of Front, Bottom is above Front
10
New cards
Auxiliary view vs. detail view
Auxiliary view projects onto an inclined plane perpendicular to inclined feature using fold lines; detail view enlarges a small/complex feature
11
New cards
Creo drawing display style rule
Avoid Shaded views on drawings; use Hidden Line, No Hidden, or Wireframe as appropriate
12
New cards
Visible line
THICK continuous line showing visible edges and contours
13
New cards
Hidden line
THIN evenly spaced short dashes showing hidden features
14
New cards
Section line
THIN continuous or hatched lines showing cut surfaces in a section view
15
New cards
Center line
THIN alternating long and short dashes marking axes of symmetry, bolt circles, and hole centers
16
New cards
Dimension line, extension line, and leaders
THIN lines indicating size and location; dimension lines end in arrowheads
17
New cards
Cutting-plane or viewing-plane line
THICK line with arrows indicating section cut direction or viewing direction
18
New cards
Short-break line
THICK freehand line indicating a partial break
19
New cards
Long-break line
THIN ruled line with zigzags across long sections
20
New cards
Phantom line
THIN long dash followed by two short dashes showing alternate positions, adjacent/mating parts, or paths of motion
21
New cards
Stitch line
THIN short dashes indicating stitching or sewing
22
New cards
Chain line
THICK line indicating a surface requiring special treatment or control
23
New cards
Key dimensioning rules
No duplicate/cumulative dimensions; dimension between functional/mating features and datums/finished surfaces/center lines; do not make machinist calculate/scale/assume; attach to true-shape view, avoid hidden lines, put longer dimensions outside intermediate ones
24
New cards
Extension and dimension line spacing
Leave ~1/16 in. (1.5 mm) gap from visible line and extend ~1/8 in. (3 mm) past outer arrowhead; keep dimension lines >= 3/8 in. (9 mm) from object and >= 1/4 in. (6 mm) between parallel dimension lines
25
New cards
Required title block items (all drawings)
Drawing Name, Drawing Number, Date, and Drawn by (printed required; signature/initials recommended)
26
New cards
Required items on detail and dimensioned assembly drawings
Units System and Scale
27
New cards
Title block tolerancing rule
NOT a substitute for tolerancing dimensions, and should never be more stringent (tighter) than tolerances on the drawing
28
New cards
Drawing package order
(1) Master Assembly Drawing (qty 1), (2) Sub-assembly Drawings (qty 0-n), (3) Detail Drawings (qty m)
29
New cards
Standard part vs. purchased part
Standard part is specified by national/international standard (e.g., bolts, screws, pins, washers) using standard designation, no detail drawing or tech spec sheet needed unless modified; purchased part is bought completed from an OEM (e.g., bearings, gears, motors), specified by OEM part number on BOM, no detail drawing but requires a tech spec sheet
30
New cards
Limit dimensioning vs. plus-and-minus dimensioning
Limit puts upper limit over lower limit; plus-and-minus uses unilateral (one limit zero), bilateral unequal, or equal bilateral tolerances
31
New cards
Default decimal tolerances
XX.X = +-0.050, XX.XX = +-0.010, XX.XXX = +-0.005, XX.XXXX = +-0.0005, Angles = +-0.50 deg
32
New cards
Hole-basis vs. shaft-basis fit system
Hole-basis keeps hole size constant and varies shaft size; shaft-basis keeps shaft size constant and varies hole size
33
New cards
Clearance fits (RC1-RC9) vs. interference/force fits (FN1-FN5)
RC fits provide running/sliding clearance (RC1 close sliding to RC8-RC9 loose running); FN fits have inside member larger than outside member requiring assembly force/shrinkage (FN1 light drive to FN4-FN5 force fits)
34
New cards
GD&T symbol categories
Form (straightness, flatness, circularity, cylindricity), Profile (line, surface), Orientation (angularity, perpendicularity, parallelism), Location (position/symmetry, concentricity), Runout (circular, total)
35
New cards
Tolerance and surface finish cost relationship
Tighter tolerances (more significant figures) and smoother/less rough surfaces increase manufacturing cost; open tolerances and rougher surfaces cost less
36
New cards
Surface texture components
Roughness (fine/short-wavelength deviations), waviness (wider/longer-wavelength deviations), and lay (predominant direction of surface pattern)
37
New cards
Why surface roughness matters
Affects appearance, mechanical properties (such as crack initiation), safety, friction and wear, and assembly of mating parts
38
New cards
Roughness average (Ra)
Arithmetic average of profile height ordinates |y| over sampling length l: Ra = (1/l) * integral |y| dl approx sum(|y_i|)/n
39
New cards
RMS roughness (Rq) vs. ten-point mean roughness (Rz)
Rq is root-mean-square average of profile ordinates; Rz is average of vertical peak-to-valley heights across five sampling lengths (more sensitive to extremes than Ra)
40
New cards
Skewness (Rsk) and kurtosis (Rku)
Rsk measures symmetry of peaks and valleys around the mean line; Rku measures sharpness/peakedness of the height distribution
41
New cards
Surface texture symbol zones (ASME Y14.36M)
Horizontal bar in vee = machining required; circle in vee = material removal prohibited; left of long leg = Ra value; below horizontal extension = cutoff/sampling length in mm; right of long leg = lay symbol
42
New cards
Lapping vs. honing
Lapping uses a lap and abrasive slurry/rolling or embedded particles for ultra-fine tolerances/finishes; honing uses bonded abrasive sticks with rotating + reciprocating motion for internal bores with a cross-hatched pattern
43
New cards
Grinding types
Grinding between centers, external centerless grinding (grinding wheel, regulating wheel, work rest), and internal centerless grinding
44
New cards
Drilling, counterbore, countersink, reaming, and boring
Drilling makes/enlarges holes; counterbore makes a flat-bottomed shallower larger hole for a head/cap; countersink makes an angled recess; reaming finishes/sizes accurately; boring enlarges/finishes internal holes with single-point tool/boring bar
45
New cards
Turning, milling, and broaching
Turning rotates work with non-rotary single-point tool; milling uses rotating multi-tooth cutter as work feeds; broaching pushes/pulls a multi-tooth tool (roughing to finishing teeth) in a single pass
46
New cards
Planing vs. shaping
Planing moves the workpiece linearly with intermittent tool feed; shaping reciprocates the tool linearly with intermittent workpiece feed
47
New cards
Sand casting key terms
Molten metal poured into sand mold cavity (cope top, drag bottom, green sand, pattern, core, runner/ingate, riser)
48
New cards
Closed-die vs. open-die forging and steel heating chart
Closed-die uses shaped dies with flash/flash gutter; open-die uses flat/simple dies (e.g., large shafts); hot working/forging occurs in austenitic range where steel is non-magnetic (magnetic below A2 in ferrite)
49
New cards
Rolling vs. extrusion
Rolling passes metal between rotating rolls (cold-worked steel is typically harder/stronger than hot-rolled); extrusion pushes a heated billet through a shaped die for uniform cross-sections
50
New cards
Mechanical fastener categories
Permanent vs. non-permanent; non-permanent splits into general fasteners (keys, pins, retaining rings) and threaded fasteners (bolts with nuts, screws, studs)
51
New cards
Key thread geometry terms
Nominal size, major diameter, pitch diameter, minor (root) diameter, pitch p (= 1/n), lead, thread angle (60 deg for Unified and Metric M), crest, root, tip, 45 deg chamfer, nominal length, thread length, grip length
52
New cards
External (A) vs. internal (B) thread classes and allowance
External uses 1A, 2A, 3A (1A and 2A have allowance; 3A has zero allowance); internal uses 1B, 2B, 3B; 2A/2B is standard commercial (~90%), 3A/3B is close tolerance
53
New cards
UNR and left-hand (LH) thread designations
UNR specifies a rounded root on external threads for better fatigue resistance; LH indicates a left-hand thread (right-hand is default)
54
New cards
Load distribution across engaged nut threads
Load is NOT shared equally; the first thread carries the largest share (e.g., ~34% on thread 1, ~23% on thread 2), decreasing along the nut
55
New cards
Tensile stress area (At) and minor-diameter shear area (Ar)
At is equivalent unthreaded tensile area between pitch and minor diameters; Ar = pi * d_r^2 / 4 resists transverse shear in threaded section (use major diameter if shear is in unthreaded shank/neck)
56
New cards
Minimum length of engagement (Le)
Minimum thread engagement length needed so external threads do not strip before tensile failure of the bolt
57
New cards
UNC vs. UNF vs. UNEF (for 1/2-UN)
Going from UNC (13 TPI) to UNF (20 TPI) to UNEF (28 TPI) increases tensile stress area and shear area; coarse threads assemble faster and resist minor damage/corrosion better, while fine/extra-fine suit short engagement or thin walls
58
New cards
Taper tap, plug tap, and bottoming tap
Taper tap has 8-10 tapered threads; plug tap has 3-5 tapered threads (general purpose); bottoming tap has 1-1.5 tapered threads for blind holes near bottom
59
New cards
Tap drill formula
TD = MD - (1 / N), where MD is tap major diameter and N is threads per inch (gives ~75% thread)
60
New cards
Square, Acme, and buttress thread profiles
Square: thickness/space = p/2, depth = p/2; Acme: 29 deg angle, depth = p/2 across pitch line (power/lead screws); Buttress: 45 deg load face, depth = 3p/4, crest = p/8 (heavy unidirectional thrust)
61
New cards
Power screw sliding friction
Independent of axial load, nearly independent of speed, decreases with heavier lubricants, and is lowest/best for steel on bronze (~0.10-0.15)
62
New cards
ISO metric thread callout (e.g., M 10 x 1.5 - 6g6g)
M is metric thread symbol, 10 is nominal diameter (mm), 1.5 is pitch in mm (NOT threads per mm), and 6g6g is tolerance class; sharp V height H = 0.86603 * p
63
New cards
Standard bolt thread length (LT / lT)
Inch: 2D + 1/4 in. (L <= 6 in.) or 2D + 1/2 in. (L > 6 in.); Metric: 2d + 6 (l <= 125 mm), 2d + 12 (125 < l <= 200 mm), 2d + 25 (l > 200 mm)
64
New cards
Proof load (Fp) and recommended preload (Fi)
Fp = At * Sp (proof stress is max stress without permanent set; approx 0.85 * Sy if unlisted); recommended preload Fi = 0.75 * Fp for non-permanent/reused fasteners and 0.90 * Fp for permanent connections
65
New cards
Socket head cap screw clearance holes
Close fit for single/matched holes; normal fit for longer/multi-screw assemblies with normal alignment variation; countersink/break edges on holes < (D_max + 2*F_max) in hard parts to protect head fillets
66
New cards
Pins, points, necks, and locking methods
Pins: dowel, taper, grooved, clevis, cotter; Points: plain, chamfer, oval, spherical, needle, cone, nail, pinch, header, gimlet, pilot; Necks: fin, ribbed, neck, square; Locking: jam nut, lock-washer, locking tab, plastic insert, cotter pin, thread deformation, elastic stop, thin spring snap