1/71
Comprehensive vocabulary flashcards covering atomic structure, periodic properties, chemical bonding, chemical reactions, stoichiometry, gas laws, and condensed states of matter.
Element (Boyle's Definition)
A fundamental substance that cannot be broken down into two or more simpler substances by chemical means.
Law of Constant Composition
The law stating that the relative amount of each element in a given chemical compound is always fixed and identical, regardless of the source or method of preparation.
Dalton's Atomic Theory
The 1803 model stating that matter consists of indivisible atoms; all atoms of an element are identical in mass; atoms of different elements differ; atoms combine in fixed ratios to form compounds; and chemical reactions merely rearrange how atoms are grouped.
Atomic Mass Unit (amu)
A relative mass unit defined on a scale where one atom of 12C is assigned a mass of exactly 12amu; equivalent to the Dalton in biochemistry.
Atomic Number (Z)
The number of protons in the nucleus of an atom, which uniquely specifies the chemical identity of the element.
Mass Number (A)
The total sum of the number of protons and neutrons located within the nucleus of an atom.
Isotopes
Atoms belonging to the same element that contain the same number of protons but different numbers of neutrons in their nuclei.
Allotropes
Two or more distinct structural forms of the same element existing within the same physical state (such as diamond and graphite for solid carbon).
First Ionization Energy
The minimum energy required to completely remove an electron from a neutral gaseous atom or ion in its ground state.

Rutherford's Gold Foil Experiment
An experiment where a beam of α particles was directed at thin metal foil; large-angle scattering demonstrated that the mass and positive charge of an atom are concentrated in a tiny central nucleus.

Young's Double-Slit Experiment
An 1807 experiment by Thomas Young showing that light passing through two parallel slits generates alternating constructive and destructive interference fringes, demonstrating wave behavior.
Photoelectric Effect
The phenomenon in which electrons are ejected from a metal surface when irradiated by light possessing a frequency at or above a material-specific threshold frequency (ν0).
Wave-Particle Duality
The principle that electromagnetic radiation and subatomic matter (such as electrons) display both wavelike characteristics (diffraction, interference) and particle-like properties (photons, localized mass).
Balmer Series
The visible emission lines of atomic hydrogen resulting from electron transitions from upper quantum levels (n>2) down to the first excited state (n=2).
Atomic Orbital
A mathematical wave function (ψ) whose square (ψ2) represents the three-dimensional spatial probability density (typically 95%) of finding an electron around a nucleus.
Principal Quantum Number (n)
An integer quantum number (n=1,2,3,…) designating the main electronic shell, overall size, and energy level of an orbital.
Azimuthal Quantum Number (l)
The angular momentum quantum number taking integer values from 0 to n−1, designating the subshell and the geometrical shape of an orbital (s,p,d,f).
Magnetic Quantum Number (ml)
The quantum number taking integer values from −l to +l, defining the spatial orientation of an orbital relative to Cartesian coordinates.
Pauli Exclusion Principle
The quantum mechanical rule stating that no two electrons in an atom can have the exact same set of all four quantum numbers (n,l,ml,ms); each orbital holds at most two electrons with opposite spins.
Aufbau Principle
The guideline stating that electrons occupy the lowest available atomic energy orbitals first before filling higher-energy levels.
Hund's Rule
The rule establishing that degenerate orbitals are each singly occupied with electrons of parallel spins before any orbital is doubly occupied, maximizing total spin.
18-Electron Rule
A stable, closed outer-shell electron configuration (ns2np6nd10) characteristic of specific post-transition metal cations such as Cu+, Zn2+, and Ga3+.
Ionic Bond
The electrostatic attraction holding oppositely charged cations and anions together following the complete transfer of valence electrons.
Covalent Bond
A chemical bond characterized by the sharing of one or more pairs of valence electrons between atoms.
Formal Charge
The calculated charge of an atom in a molecule: FC=(valence e− of free atom)−[(lone pair e−)+21(bonding e−)].
Resonance Hybrid
The true, composite structure of a molecule or polyatomic ion representing the weighted average of two or more contributing Lewis structures with delocalized electrons.
Free Radical
A highly reactive chemical species containing one or more unpaired valence electrons.
Expanded Valence Shell
An arrangement where a central atom in period 3 or below accommodates more than an octet of electrons (often 10 or 12) using available, low-energy d orbitals.
VSEPR Theory
Valence Shell Electron Pair Repulsion theory; a model predicting three-dimensional molecular geometries by minimizing electrostatic repulsions among electron pairs around a central atom.
Steric Number
The sum of the number of atoms bonded to a central atom plus the number of lone pairs on that central atom, determining its electron-pair geometry.
Orbital Hybridization
The conceptual mixing of non-equivalent atomic orbitals (s, p) on an atom to produce degenerate hybrid orbitals (sp, sp2, sp3) oriented for optimal directional bonding.
Sigma (σ) Bond
A covalent bond formed by end-to-end (head-on) orbital overlap along the internuclear axis, with maximum electron density located between the nuclei.
Pi (π) Bond
A covalent bond resulting from side-by-side overlap of parallel unhybridized p orbitals, with electron density localized above and below the internuclear axis.
Precipitation Reaction
An aqueous reaction in which soluble ionic reactants combine to form an insoluble solid compound known as a precipitate.
Spectator Ion
An ion that remains dissolved and chemically unaltered on both sides of a chemical equation, not taking part directly in the reaction.
Net Ionic Equation
A chemical equation that includes only those species directly involved in the chemical transformation, omitting all spectator ions.
Oxidation
The loss of one or more electrons by a chemical species, corresponding to an increase in its oxidation state.
Reduction
The gain of one or more electrons by a chemical species, corresponding to an algebraic decrease in its oxidation state.
Oxidizing Agent
The reactant that causes the oxidation of another substance by accepting electrons, undergoing reduction itself in the process.
Reducing Agent
The reactant that causes the reduction of another substance by donating electrons, undergoing oxidation itself in the process.
Half-Reaction
An explicit representation of either the reduction or oxidation component of a redox process, showing the transferred electrons explicitly.
Mole (mol)
The SI base unit for amount of substance, equal to the number of carbon atoms in exactly 12g of 12C (6.02×1023 entities).
Molar Mass
The mass in grams of one mole of a chemical element or compound (g/mol).
Molarity (M)
A concentration unit defined as the moles of solute dissolved per liter of total solution (mol/L).
Dilution
The process of adding solvent to a concentrated stock solution, reducing concentration while keeping the total moles of solute constant (M1V1=M2V2).
Dilution Factor (DF)
A dimensionless ratio greater than 1 representing the extent of dilution, defined as stock concentration over diluted concentration (Ms/Md) or diluted volume over stock volume (Vd/Vs).
Limiting Reagent
The reactant that is completely consumed first in a chemical reaction, thereby limiting the maximum quantity of products that can be formed.
Theoretical Yield
The maximum calculated quantity of product that could be formed in a chemical reaction based on the complete consumption of the limiting reagent.
Percent Yield
The ratio of the experimentally measured actual yield to the theoretical yield, expressed as a percentage: Theoretical YieldActual Yield×100%.
Pressure
The perpendicular force exerted per unit area (P=AF), with standard SI units of Pascals (1Pa=1N/m2=1J/m3).
Boyle's Law
The gas law stating that the volume of a gas sample is inversely proportional to its pressure at constant temperature and quantity (PV=k).
Charles's Law
The gas law stating that the volume of a gas sample is directly proportional to its absolute temperature in Kelvin at constant pressure and quantity (TV=b).
Avogadro's Law
The gas law establishing that the volume of a gas at constant temperature and pressure is directly proportional to the number of moles of gas (V∝n).
Standard Temperature and Pressure (STP)
Standard conditions for gases defined as 0∘C (273K) and 1atm, where one mole of ideal gas occupies 22.4L.
Dalton's Law of Partial Pressures
The law stating that the total pressure exerted by a mixture of non-reacting ideal gases equals the sum of the partial pressures exerted by each individual gas (Ptotal=P1+P2+P3+…).
Kinetic Molecular Theory of Gases
A theoretical model postulating that gases consist of tiny particles with negligible volume relative to total space, moving in constant random motion, exerting pressure through elastic collisions, having no intermolecular forces, and with average kinetic energy proportional to absolute temperature.
Compressibility Factor (Z)
The ratio Z=nRTPV used to gauge deviation from ideal behavior; values below 1 indicate dominant intermolecular attractions, while values above 1 reflect molecular volume repulsions at high pressure.
van der Waals Equation
An equation of state for real gases, [P+V2an2][V−nb]=nRT, where a corrects for intermolecular attractive forces and b corrects for finite molecular volume.
![<p>An equation of state for real gases, $$\left[P + \frac{an^2}{V^2}\right][V - nb] = nRT$$, where $$a$$ corrects for intermolecular attractive forces and $$b$$ corrects for finite molecular volume.</p>](https://assets.knowt.com/pdf-flow-prod/4c14ad7d-282d-4940-a942-b60a846eae34-figures/56.png)
Vapor Pressure
The partial pressure exerted by a vapor in dynamic equilibrium with its condensed liquid or solid phase in a closed container at a given temperature.
Normal Boiling Point
The temperature at which the equilibrium vapor pressure of a liquid equals standard atmospheric pressure (1atm or 760mmHg).
Hydrogen Bond
A strong dipole-dipole intermolecular attraction occurring between a hydrogen atom covalently bonded to an electronegative atom (N, O, F) and an unshared pair of electrons on an adjacent N, O, or F atom.
London Dispersion Forces
Weak, transient intermolecular attractions present in all atoms and molecules arising from instantaneous, induced dipole fluctuations in electron clouds.

Phase Diagram of Water (H2O)
A pressure-temperature phase diagram featuring a solid-liquid coexistence curve with a negative slope, reflecting the unique property that solid ice is less dense than liquid water and melts under pressure.
Triple Point
The unique temperature and pressure on a phase diagram at which the solid, liquid, and gaseous states of a pure substance coexist in thermodynamic equilibrium.
Critical Point
The thermodynamic endpoint of the liquid-gas boundary curve beyond which liquid and gas phases coalesce into a single supercritical fluid phase.
Surface Tension
The energy required to increase the surface area of a liquid per unit area (J/m2 or N/m), arising from net inward cohesive forces acting on surface molecules.
Viscosity
A fluid's internal resistance to flow, which decreases as temperature increases due to higher kinetic energy overcoming intermolecular forces.
Amorphous Solid
A solid lacking long-range three-dimensional repeating order, causing it to soften gradually over a temperature range rather than melting at a sharp, discrete melting point.
Unit Cell
The smallest repeating structural subunit of a crystal lattice that, when translated in three dimensions, generates the entire lattice network.

Face-Centered Cubic (FCC) Unit Cell
A cubic crystal unit cell containing lattice points at the eight corners and the centers of all six faces, comprising a net total of 4 constituent atoms (8×81+6×21=4).
Covalent-Network Solid
A crystalline solid consisting of atoms bonded in an extended continuous three-dimensional network of covalent bonds, resulting in extreme hardness and exceptionally high melting temperatures (such as diamond and quartz).
Metallic Solid
A solid consisting of metal cations held together within a sea of freely delocalized valence electrons, accounting for high electrical and thermal conductivity, malleability, and ductility.