Microbiology Lab Exam 2

0.0(0)
Studied by 0 people
call kaiCall Kai
learnLearn
examPractice Test
spaced repetitionSpaced Repetition
heart puzzleMatch
flashcardsFlashcards
GameKnowt Play
Card Sorting

1/136

encourage image

There's no tags or description

Looks like no tags are added yet.

137 Terms

1
New cards

What are the 2 types of requirements for microbial growth?

  1. Physical requirements

  2. Chemical requirements


2
New cards

What are the 3 physical requirements?

  1. Temperature

  2. pH

  3. Osmotic pressure


3
New cards

Define cardinal temperatures

3 sets that create a temperature profile for an organism

4
New cards

What are the 3 cardinal temperatures and describe them

  1. minimum growth temperature — lowest temperature an org can grow in

  2. optimum growth temperature — temperature an org grows best and fastest in (focused on)

  3. maximum growth temperature — highest temperature an org can grow in


5
New cards

What are the temperature classifications? Provide parameters and examples.

  1. Psychrophiles — 15C or lower (cooler environments)

  2. Psychrotrophs — 15C to 25C (close to water sources; room temperature)

  3. Mesophiles — 25C to 45C (clinically important because they can cause disease/infections since normal human body temperature is at 37C)

  4. Thermophiles — 45C to 65C

    1. 66C to 79C are not considered a range because most organisms do not prefer these temperatures

  5. Hyperthermophiles — 80C or higher (underwater volcanic vents,hot areas)


6
New cards

What does pH measure?

acidity or alkalinity of a solution; potential of hydrogendefined by the concentration of hydrogen ions in a solution, typically measured on a scale from 0 to 14.

7
New cards

What are the pH classifications? Provide parameters and examples.

  1. Acidophiles — <6.5; found in the stomach

  2. Neutrophiles — 6.5 to 7.5; most are neutrophiles

  3. Alkalinophiles — >7.5; found in the large intestines


8
New cards

Define osmotic pressure and osmosis

 pressure due to osmosis, or the movement of water molecules across a semipermeable membrane from a high to low concentration

9
New cards

What are the 3 types of environments regarding osmosis? Describe what happens

  1. Hypertonic — conc outside > conc inside of the cell; water moves out of the cell; plasmolysis where the cytoplasm shrinks, cell membrane shrivels, and cell wall remains the same

  2. Isotonic — conc outside = conc inside of the cell; water moves in and out of the cell at the same rate; no net water movement; no change in the cell

  3. Hypotonic — conc outside < conc inside of the cell; water moves into the cell; swelling, bursting, lysis


10
New cards

Define tonicity

concentration of impermeable solutes

11
New cards

What are halophiles?

salt loving organisms

12
New cards

What are the two types of halophiles? Describe and provide examples

  1. Facultative halophiles —> can grow in environments with a decent amount of salt concentration, but do not require it; 2 to 15% NaCl

    1. Staphylococcus aureus found on our skin

  2. Obligate halophiles —> grows and lives in environments with a high concentration of salt; 9 to 30% NaCl; no need to worry about them affecting humans

    1. Archaea in salt churns, Salton Sea, Dead Sea


13
New cards

Define chemical requirements

specific elements needed to synthesize biomolecules and for organisms to grow


14
New cards

What are the 7 chemical requirements?

  1. Carbon

  2. Nitrogen

  3. Sulfur

  4. Phosphorous

  5. Trace elements

  6. Organic growth factors

  7. Oxygen


15
New cards

Describe carbon and what is it required for?

  • we and microbes are carbon beings

    • Structural backbone of living matter

    • Required for synthesis of organic compounds in cells via C-C bonds

      • In media, a carbon source is needed whether sugar or protein


16
New cards

What is nitrogen required for?

Required for synthesis of proteins (amino acids have an amine group NH2 with a nitrogen group) and nucleic acids (DNA, RNA, and ATP made of nucleotides that have a nitrogenous base)

17
New cards

What is sulfur required for?

  • Required for synthesis of certain proteins and is found in certain amino acids

    • Disulfide bonds stabilize tertiary and quaternary structures of proteins


18
New cards

What is phosphorous required for?

  • Required for nucleic acids (nucleotides have a phosphate group) and phospholipids (hydrophilic polar phosphate head that faces outward and makes up the outer surfaces of the phospholipid bilayer)


19
New cards

Describe trace elements and what are they required for? Examples.

  • different minerals, metals, inorganic compounds

  • Required for an enzyme to function (cofactor) — media must be supplemented with them

    1. minerals, iron, copper, zinc


20
New cards

What are organic growth factors required for?

  • some organisms require organic substances that cannot be synthesized by an organism and must be taken in from the environment to build other structures; media must be supplemented with vitamins or amino acids based on the microorganism


21
New cards

What is oxygen required for as a chemical requirement?

  1. required for aerobic respiration and is the final electron acceptor of the ETS


22
New cards

What are the classifications of oxygen? Describe parameters

  1. Aerobes —> use oxygen

    1. Obligate aerobes — require oxygen to live and without it they will die

    2. Microaerophiles — small air loving organisms that prefer high CO2 (5 - 10%) and low O2 to grow

      1. Too little or too much — will not grow

  2. Anaerobes —> do not use oxygen

    1. Obligate anaerobes — cannot tolerate oxygen

    2. Aerotolerant anaerobes — do not use O2, but can tolerate it

    3. Facultative anaerobes — prefer O2 and grow best with it, but can live without it


23
New cards

What is media?

nutrient suspension used to grow microbes

24
New cards

Describe the two types of media

  1. Liquid — broths

  2. Solid — contain agar (marine algae extract serving as a solidifying agent)


25
New cards

What are the anaerobic growth methods?

  1. Reducing Media

    1. Media contains chemical reagents that bind to oxygen and remove it

    2. Uses: culturing anaerobes in a tube and determining O2 requirements

    3. Examples: Fluid Thioglycollate Media (FTM)

      1. Can achieve microbial growth but not isolation

  2. Anaerobic Jar

    1. chamber containing a packet (gas sachet or pack) or chemicals that remove/absorb O2

      1. Methylene blue is the oxygen indicator inside a pink pill

    2. Uses: culturing/isolating anaerobes on a plate


26
New cards

What is the process of how bacteria reproduce?

  1. Binary fission: division of a cell into two identical cells

    1. Cell elongates, DNA replicates

    2. Cell wall and membrane form a septum/barrier in the middle

    3. Cell membrane and DNA separate to form 2 genetically identical daughter cells


27
New cards

What are the 4 phases of the bacterial growth curve? Describe each of them

  1. Lag Phase

    1. bacteria are adjusting or acclimating to the environment, making new enzymes and not replicating; no increase in numbers

  2. Log/Exponential growth phase

    1. bacteria are actively metabolizing and reproducing exponentially; a lot of growth and reproduction; increase in numbers

  3. Stationary phase

    1. Replication rate = Death rate; nutrients are low, waste is high, overpopulation; no change

  4. Death/decline phase

    1. Death rate > replication rate; too much waste and toxicity; decrease in numbers


28
New cards

What is generation time and how is it calculated? Give two examples.

  1. time it takes for 1 cell —> 2 cells or undergo binary fission

  2. calculated in the log phase

    1. almost linear because of the strong increase in numbers

    2. varies depending on the organism

      1. labs — take about 2 minutes in the right conditions

      2. strange/different environments — slower and takes about 24 days


29
New cards

What are the two unusual bacteria genera?

Chlamydiae and Rickettsiae

30
New cards

Describe Chlamydiae

  1. Obligate intracellular parasite —> must be inside another cell to replicate and causes damage in the process; like a virus but is a bacteria

  2. Lack ATP machinery — steal energy from host cell because they cannot generate their own energy

  3. Forms

    1. Elementary body — taken into cell; dormant and protected

      1. Infective form

      2. Phagocytized by host cell

    2. Reticulate body

      1. Actively metabolizing and reproducing form

      2. Replicates inside host cell using its energy


31
New cards

Describe Rickettsiae

  1. Obligate intracellular parasite —> must be inside another cell to replicate and causes damage in the process; like a virus but is a bacteria

  2. Extremely permeable membrane that allows it to go inside a host cell and replicates by using the host’s rich cytoplasm for its nutrients

  3. Hosts: humans, arthropods (lice, mites, fleas, ticks)


32
New cards

What are two ways to measure growth and describe them.

  1. Direct: cell or colony counts

  2. Indirect: quantifying changes


33
New cards

Describe direct measurements of growth

  1. counting chambers —> physically counting number of bacteria; both dead and alive counted because unable to differentiate; how much is in one big square and how much squares one drop of culture covers

  2. plate counts —> counting number of colonies

    1. Culture serially diluted

    2. plated on several plates, spread, and incubated

    3. Count number of colonies (CFU) and use it to calculate the original cell density (OCD) of the original culture

      1. OCD = # of colonies (CFU)/[amt plated (mL) x dilution]

      2. 30 to 300 CFU preferred and countable amount on a plate


34
New cards

Describe indirect measurements of growth

  1. turbidity —> how cloudy

    1. cloudiness indicates bacterial growth

    2. Cloudier = more bacteria

    3. Spectrophotometer measures turbidity

  2. metabolic activity —> how much occurring

    1. metabolic products (acid or gas) measured

      1. more product = more bacteria

  3. dry weight 

    1. Dehydrate sample by removing water

    2. weigh to determine amount

    3. used for fungi or organisms with odd shapes



35
New cards

Define sterilization, disinfection, antiseptic, bactericidal, and bacteriostatic

  • Sterilization —> destruction of all life forms (vegetative bodies and endospores)

  • Disinfection —> destruction of vegetative bodies/pathogens, not endospores

  • Antiseptic —> used only on skin and destruction of vegetative bodies/pathogens found on living tissue

  • Bactericidal —> kills microbes (some disinfectants and methods)

  • Bacteriostatic —> temporarily inhibits microbial growth rather than killing microbes


36
New cards

What are the 5 physical methods of controlling microbial growth?

  1. Heat

  2. Cold

  3. Filtration

  4. Desiccation

  5. Radiation


37
New cards

What are the types of heat? Describe their parameters

  1. Dry heat

    1. Action: oxidation damages cell components

    2. Achieves: sterilization

    3. Examples:

      1. Incineration — bunsen burner, burning, flaming loop

      2. Hot air ovens — home oven; no moisture; controlled at different temperatures

        1. 171C for 1 hour

        2. 160C for 2 hours

  2. Moist heat

    1. Action: steam coagulates/denatures cell components, making them useless

    2. Examples

      1. Autoclaving —> steam and pressure

        1. Achieves: sterilization

        2. 121C for 15 minutes at 15 psi

        3. Black tape = autoclaved

        4. mint tape = not autoclaved

      2. Boiling

        1. achieves: disinfection

        2. 100C for 15 to 30 minutes

      3. Pasteurization —> targets microbes only found in food with high temperatures and is used to increase shelf life 

        1. Achieves: reducing number of microbes

        2. Process

          1. classical — 63C for 30 minutes

          2. High Temperature Short Time (HTST) — 72C for 15 seconds

          3. Ultra High Temperature (UHT) — 140C for 3 seconds (adding pressure helps penetrate endospore coat, achieving sterilization)


38
New cards

What does cold achieve? Provide parameters

  1. Bacteriostatic (inhibits bacterial growth) and reduces metabolic rate (molecules won’t move as much and enzymes are not as effective so the microbe doesn’t grow)

    1. Refrigerator: 0 to 7C —> prevents spoiling

    2. Freezer: -5C or less


39
New cards

How does filtration work? Provide two examples

  1. Removal of bacteria from a suspension using a porous barrier — pores determine size of microbe that will be filtered

  2. Types

    1. High Efficiency Particulate Air (HEPA) Filter: removes microbes from air (like an air filter that removes dust particles and microbes associated with the dust particles)

    2. Membrane filters: used in labs to remove microbes from liquids (useful when preparing a contaminated liquid solution that is heat sensitive and cannot be heated)


40
New cards

How does desiccation/drying out work? Provide two examples.

  1. Removal of water

  2. Bacteriostatic —> enzymes need water to work and removing water stops a bacteria from metabolizing

  3. Examples

    1. Drying: removing water with heat or moving air

    2. Hypertonic environment: high concentrations of salt or sugar draws out water from the cells so they don’t metabolize and stop growing

      1. Salting meats and fish, adding sugar for fruit preserves (jams and jellies)


41
New cards

How does radiation work? Describe the two types

  1. shorter the wavelength, stronger the energy, the more damage

  2. Types:

    1. Ionizing radiation

      1. produces high energy ions (free radicals) that causes damage to the cell

        1. Ionizing radiation knocks electrons off of atoms and molecules, generating unbalanced ions that damage surrounding molecules and create mutations, leading to death of a cell

      2. Examples: causes damage to cells but if used in a controlled manner, can be useful in controlling microbes (irradiating foods in Europe to kill all bacteria; onions, herbs, spices)

        1. Gamma rays

        2. X-rays

    2. Non-ionizing radiation

      1. Ultra violet (UV)

        1. 15 to 400 nanometers

        2. 3 types: UVC, UVB, UVA

        3. Targets DNA at 260 nanometers and is absorbed, causing damage

        4. Action: induces thymine dimers in DNA that leads to mutations and death

          1. Two T’s next to each other form a bond and bulge out, resulting in incorrect DNA replication

        5. Achieves: disinfection

        6. Limitation: doesn’t penetrate well

          1. a piece of paper can prevent UV from reaching microbes


42
New cards

What do antimicrobial agents do?

  1. Alter the cell membrane by damaging it

  2. Denature nucleic acids

  3. Denature proteins


43
New cards

What are the 9 types of Disinfectants/Anti-septics?

  1. Phenols and phenolics

  2. Biguanides

  3. Aldehydes

  4. Ethylene oxide

  5. Halogens

  6. Alcohols

  7. Heavy metals

  8. Peroxides

  9. Surface-active agents


44
New cards

What are the 3 types of phenols and phenolics? Describe them, their action, and their uses

  1. Phenol → basic phenol

    1. Carbolic acid – used by Joseph Lister as an antiseptic for wounds

    2. Action: disrupt membranes and denature proteins

    3. Uses: surface disinfectant (mainly; amphyl in labs) and antiseptics (rarely; carcinogenic; chloraseptic throat spray which is used for a sore throat as phenol numbs it; not to use too much or swallow)

  2. Phenolics → modified phenols

    1. Derivatives of phenols

    2. Action: disrupt membranes and denature proteins

    3. Uses: surface disinfectant (lysol) and antiseptics

  3. Bisphenols → two phenol groups attached together

    1. Two phenols linked by a bridge

    2. Action: disrupt membranes

    3. Uses: hand soaps (triclosan discontinued) and hand lotions – antiseptic


45
New cards

What is biguanide associated with, its action, and its uses?

  1. Chlorhexidine

  2. Action: disrupt membranes

  3. Uses: surgical hand scrubs, antiseptic (Chlorhexidine wipes)


46
New cards

What are the types of aldehydes, their action, and their uses?

  1. Types:

    1. Glutaraldehyde: liquid form

    2. Formaldehyde: gas form

  2. Action: denature proteins and is strong

  3. Uses: disinfecting medical supplies and a preservative for dead tissues that will be dissected or observed


47
New cards

What is the action and use of ethylene oxide?

  1. Action: denature proteins

  2. Uses: sterilize hospital equipment that cannot withstand high temperatures


48
New cards

What is the action of Halogens? Describe two examples and each of their uses

  1. Action: oxidation (damages membrane, proteins, and nucleic acids)

  2. Examples

    1. Chlorine

      1. Use: disinfect water (low conc), surface disinfection (high conc)

    2. Iodine

      1. Types

        1. Tincture: iodine and alcohol

          1. Alcohol would evaporate but iodine stays and continues to damage; used for surgeries

        2. Iodophore: iodine and organic molecule

      2. Use: antiseptic


49
New cards

What is the action and use of alcohol?

  1. Action: disrupt membrane and denature proteins

  2. Use: surface disinfectant, antiseptic (hand sanitizer with alcohol 62 to 70%)


50
New cards

Describe heavy metals and examples. What are their actions and what are the uses for each of the examples?

  1. Antimicrobial

    1. Silver, mercury (treat syphilis), zinc, copper

  2. Action: denature proteins

  3. Use: antiseptic (silver in creams, mercury in creams and solutions, vaporized mercury is dangerous), antifungal (zinc in dandruff shampoo dentures fungi that dries the scalp), algicide (copper coins in fountains kill algae)


51
New cards

What is the action and use of peroxide?

  1. Action: oxidation (damages membrane, nucleic acids, and proteins)

  2. Use: surface disinfectant; deep/puncture wound antiseptic (3%; enzymes we have neutralize peroxide and form bubbles that rise up and physically remove bacteria that were placed into the wound)


52
New cards

What are the two types of surface active agents? Describe them, their actions, and their uses.

  1. Soaps and detergents

    1. Action: surfactants, mechanical removal

      1. Wetting agents that emulsify fats and oils by decreasing surface tension and mechanically remove them through proper rinsing 

    2. Uses: antiseptic

  2. Quaternary ammonium compound (QACs)

    1. Detergents that have ammonium ions (Cleaning detergents and compounds)

    2. Action: disrupts membrane (unknown because it can affect other areas; variable)

    3. Uses: instrument disinfection; antiseptic (Benzalkonium Chlorine found in newer version os antibacterial hand soaps)


53
New cards

What are two types of preservatives? Provide their actions and uses.

  1. Organic acids

    1. Action: metabolism inhibition (acids are not ideal for all organisms; if pH is too high or too low, then enzymes will stop metabolizing and the organism will not grow)

    2. Use: food (sorbic acid, propionic acid, improves shelf life), makeup/cosmetics/skincare

  2. Nitrates/Nitrites → a little carcinogenic

    1. Action: inhibit iron containing enzymes

    2. Use: meat products (prevent endospore germination in hot dogs and deli meats)


54
New cards

Define antibiotics

antimicrobial substances produced by microorganisms or other life forms

55
New cards

What are the major genera of antibiotics? What types of microbes are they?

  1. Penicillium (fungi)

  2. Cephalosporium (fungi)

  3. Streptomyces (actinomycetes – bacterial remnant of fungi)

  4. Micromonospora (actinomycetes)

  5. Bacillus (Gram + rod)


56
New cards

What are the two spectrums of antibiotics?

  1. Narrow spectrum

    1. Only a certain group is affected

      1. Antibiotic works for Gram + but not Gram -

  2. Broad spectrum

    1. Multiple groups are affected


57
New cards

What are the 5 modes of actions of antibiotics?

  1. Inhibiting cell wall synthesis by attacking the cell wall

  2. Inhibition of protein synthesis by stopping the synthesis process, affecting ribosomes, or affecting RNA

  3. Injury to the plasma membrane by messing with DNA replication or RNA

  4. Inhibition of nucleic acid synthesis

  5. Inhibition of synthesis of essential metabolites that bacteria need to synthesize necessary substances for life; if stopped, will die


58
New cards

What are 4 antibiotics associated in inhibiting cell wall synthesis?

  1. Penicillin

  2. Cephalosporins

  3. Polypeptide Antibiotics

  4. Anti-mycobacterial antibiotics


59
New cards

What is the action of Penicillin?

prevent crosslinking of peptidoglycan using a beta lactam ring

60
New cards

What are the two types of penicillin? Describe them, their advantages and disadvantages, and examples.

  1. Natural penicillin → naturally produced by certain organisms

    1. Advantages: low toxicity (not including allergies)

    2. Disadvantages: narrow spectrum (only Gram + organisms), susceptible to penicillinases (enzymes that certain bacteria can produce and will break down penicillin, thus being resistant), and allergies

    3. Examples: different side chains

      1. Penicillin G–natural; injection

      2. Penicillin V–taken orally

  2. Semi-synthetic penicillin → modified forms of natural penicillin

    1. Structure: side chains added to a beta-lactam ring in a lab

    2. Advantages: broad spectrum, resistant to penicillinases, more stable

    3. Examples:

      1. Oxacillin–resistant to penicillinases

      2. Ampicillin–broad spectrum

      3. Amoxicillin–broad spectrum and can be combined with penicillinases inhibitors


61
New cards

What is the action, advantages, and examples of Cephalosporins?

  1. Action: similar to penicillin, the beta-lactam ring differs slightly but works in the same way by preventing the crosslinking of peptidoglycan

  2. Advantages: broad spectrum

  3. Examples:

    1. Cephalothin–injections

    2. Cefixime–taken orally


62
New cards

What are the actions and examples of Polypeptide Antibiotics?

  1. Action: inhibit the synthesis of linear strands of peptidoglycan

  2. Examples:

    1. Bacitracin–Gram +, solely topical, found in neosporin (OTC triple antibiotic with bacitracin, neomycin, and polymyxin B)

    2. Vancomycin–Gram +, broad spectrum, last line of defense against MRSA


63
New cards

What are anti-mycobacterial antibiotics used against, their actions, and examples?

  1. Associated with acid-fast bacteria Mycobacterium tuberculosis and Mycobacterium leprae

  2. Action: disrupt mycolic acid synthesis or integration into the cell wall that protects mycobacterium

  3. Examples:

    1. Isoniazid–common, used first against TB, inhibits synthesis of mycolic acid

    2. Ethambutal–inhibits integration of mycolic acid into the cell wall


64
New cards

What are the 4 antibiotics associated in inhibiting protein synthesis?

  1. Chloramphenicols

  2. Aminoglycosides

  3. Tetracyclines

  4. Macrolides


65
New cards

Describe the normal process of protein synthesis

Top 50S ribosome and bottom 30S ribosome make up the 70S ribosome; tRNA brings amino acids that match the DNA strand; mRNA brings messages and ribosome attaches to it; as tRNA brings amino acids, ribosome slides over to create an amino acid chain; folds to become a protein

66
New cards

What is the action, advantages, and disadvantages of Chloramphenicol?

  1. Action: inhibits formation of peptide bonds between amino acids by reacting with the 50S portion of the ribosome

  2. Advantages: broad spectrum and inexpensive

  3. Disadvantages: suppression of bone marrow activity and formation of red blood cells


67
New cards

What is the action, advantages, disadvantages, and examples of Aminoglycosides?

  1. Action: change the shape of the 30S portion of the ribosome, causing the mRNA to read the DNA incorrectly and mess up the protein

  2. Advantages: broad spectrum

  3. Disadvantages: auditory, nerve, and kidney damage mild to extreme depending on the individual

  4. Examples:

    1. Neomycin–broad spectrum, solely topical, found in Neosporin

    2. Streptomycin–broad spectrum, including Mycobacteria

    3. Gentamicin–broad spectrum, including Pseudomonas (multi drug resistant group that is notorious for evading all different types of antibiotics)

      1. Pseudomonas aeruginosa


68
New cards

What is the action, advantages, disadvantages, and examples of Tetracyclines?

  1. Action: interfere with attachment of tRNA to the 30S portion 

  2. Advantages: broad spectrum, including Chlamydiae and Rickettsiae which are smaller and are obligate intracellular parasites that are difficult to attack (tetracyclines penetrate tissue well enough to attack them)

  3. Disadvantages: kill normal flora because they can kill everything, can cause permanent discoloration in children’s teeth (gray → iridescent; rainbow colored teeth)

  4. Examples:

    1. Tetracycline – most common

    2. Doxycycline – longer retention in the body; Gram - orgs


69
New cards

What is the action and examples of Macrolides?

  1. Block the exit tunnel of the ribosome of the polypeptide chain in protein synthesis with a macrocyclic lactone ring

  2. Examples:

    1. Erythromycin–Gram +, some gram -, oral, alternative to penicillin

    2. Azithromycin–broad spectrum, including Chlamydiae

      1. Chlamydia trachomatis


70
New cards

What antibiotic causes injury to the plasma membrane? What is its action and uses?

  1. Polymyxin B

    1. Action: increase permeability of the membrane

    2. Uses: Gram -, also Pseudomonas, solely topical in Neosporin


71
New cards

What two antibiotics are associated with inhibiting nucleic acid synthesis?

  1. Rifamycin

  2. Quinolones and Fluoroquinolones


72
New cards

What is the action, advantages, disadvantages, and examples of Rifamycin?

  1. Action: inhibit mRNA synthesis

  2. Advantages: effective against Mycobacteria, penetrates tissues well

  3. Disadvantages: orange-red urine, sweat, feces, saliva that can stain clothes

  4. Example:

    1. Rifampin


73
New cards

What is the action, advantages, and examples of Quinolones and Fluoroquinolones?

  1. Action: inhibit DNA gyrase needed for DNA replication

    1. Helicase unwinds DNA and DNA gyrase relieves torque and torsion of the unwinding

  2. Advantages: broad spectrum, penetrates tissues well

  3. Examples:

    1. Ciprofloxacin

    2. Norfloxacin


74
New cards

What is the antibiotic associated with inhibiting essential metabolite synthesis? What is its action, advantages, and examples?

  1. Sulfonamids/Sulfa drugs

    1. Action: competitive inhibitor that bacteria accidentally uses and in turn does not produce folic acid, causing death

      1. Similar structure to PABA

        1. PABA: substrate to produce folic acid

      2. Bacteria cannot produce their own folic acid

    2. Advantages: broad spectrum and can be used in combination

    3. Example: Sulfamethoxazole-Trimethoprim (SXT) – common


75
New cards

What are the 4 mechanisms of resistance that bacteria have against antibiotics?

  1. Prevent penetration of antibiotic – antibiotic is unable to get into the cell

  2. Enzymatic destruction or inactivation of the antibiotic – antibiotic gets into the cell but the bacteria has enzymes that degrade it

  3. Changes antibiotic’s target site – change the enzyme, change the target site

  4. Antibiotic is ejected with efflux pumps – antibiotic is injected but the bacteria pumps it out


76
New cards

What are the 4 ways to control resistance of bacteria against antibiotics?

  1. Use the correct dosage and finish all antibiotics prescribed

  2. Combination drug therapy – rotate different antibiotics to make sure that the bacteria does not gain resistance; usually done by pharmacists or physicians

  3. Do not use expired or outdated antibiotics → they aren’t as potent or effective; bacteria has a higher chance to gain resistance or evolve

  4. No indiscriminate use – do not self medicate, need prescriptions


77
New cards

What are the 3 types of Anti-Viral Drugs?

  1. Nucleoside and nucleotide analogs

  2. Enzyme inhibitors

  3. Interferons


78
New cards

What are Nucleoside and nucleotide analogs?


analogous to nucleosides and nucleotides

79
New cards

What are nucleosides?

nucleotides that haven’t received their phosphate yet

80
New cards

What is the action and an example of a nucleoside/nucleotide analog?

  1. Action: because they resemble nucleosides, it stops DNA replication – DNA polymerase stopped by a false nucleotide as the drug gains a phosphate and integrates with DNA

  2. Example: acyclovir – treats Herpes virus primarily (shingles and HSV I)


81
New cards

What is the action and 3 examples of enzyme inhibitors? Describe the examples (what normally happens andwhat is prevented)

  1. Action: inhibit enzymes

  2. Examples:

    1. Amantadine – inhibits uncoating virus

      1. Once a virus enters its host cell, in order for it to cause damage and begin replicating its DNA and integrating with host DNA, it has to get rid of its capsule

      2. Capsid - protein coat

      3. Virus can’t take over

    2. Indinavir – protease inhibitors

      1. After a virus takes over cells, makes proteins that are processed by proteases

      2. Protease cuts proteins

      3. Cannot make new viruses

    3. Oseltamivir/Tamiflu – inhibits neuraminidase, prevents budding of the virus

      1. Prevents virus from spreading to surrounding cells

      2. Neuraminidase is important for a virus binding and getting into a cell and budding and getting out of the cell


82
New cards

What is the action and example of interferons?

  1. Action: cytokines (cellular chemical messengers), inhibits spread of virus to new cells

    1. When a cell is infected, prevents other cells from being infected so it releases interferons to surrounding cells to produce antiviral proteins

  2. Examples:

    1. Alpha interferon – used on viral hepatitis infections


83
New cards

Define Metabolism

sum of all chemical reactions in a living organism


84
New cards

What are the two types of metabolism? Define what type of reactions they are and provide examples.

  1. Anabolism

    1. Biosynthesis reactions: building things, forming new bonds

      1. Combines simple molecules (glucose, amino acids, glycerol, fatty acids)

    2. Endergonic: requires and consumes energy/ATP

  2. Catabolism

    1. Degradative reactions: breaking down, breaking bonds

      1. Breaks down complex molecules (starch, proteins, lipids)

    2. Exergonic: releases energy/ATP


85
New cards

What are 3 characteristics of enzymes?

  1. Biological catalysts

  2. Reduce activation energy

  3. Substrate specific


86
New cards

What are biological catalysts?

speed up a variety of chemical reactions without getting used up/consumed, facilitating reactions and remaining unchanged to facilitate more reactions (efficient)


87
New cards

What is activation energy? Why is enzymes reducing the activation energy important? What are normal sources of energy without enzymes?

  1. Activation energy – minimum energy required for a chemical reaction to occur

  2. Amount depends on chemical reaction

  3. For endergonic and exergonic reactions

  4. Putting energy into system for the reaction to occur

  5. Enzymes lower the activation energy to increase the likelihood of the reaction occurring and occurring quickly, so there is less energy input than without them

  6. Sources of energy that are not enough energy to facilitate a reaction without an enzyme

    • Molecular collision

    • Vibration from other molecules


88
New cards

What is it mean when enzymes are substrate specific?

enzymes work on specific substrates, not just any

  1. Lock and key mechanism

    1. Enzyme = lock

  2. Substrate = key

  • Both have specific shapes that perfectly match and fit each other


89
New cards

What is the process of enzymes?

  1. Substrate contacts the active site of the enzyme since they have specific shapes that fit perfectly

  2. Enzyme-substrate (ES) complex forms and the enzyme lowers the activation energy by straining bonds or bringing closer together

  3. Substrate is transformed, broken down, compounded, or rearranged–does whatever the enzyme is meant to do based on the type or classification of the enzyme

  4. Transformed substrates (now products) released

  5. Unchanged enzyme free to interact with other substrates to facilitate other reactions with the same process because it is a biological catalyst


90
New cards

Define the two different enzyme sites.

  1. Active site: where substrate binds and is a specific shape

  2. Allosteric site: where other molecules (other than substrate) attach and is important for regulating the enzyme


91
New cards

What are the two types of enzymes?

  1. Simple Enzyme

  2. Holoenzyme


92
New cards

Define simple enzymes

proteins with catalytic activity to facilitate reactions; a lot of them

93
New cards

What are holoenzymes and their components? What makes a functional holoenzyme?

  1. conjugated enzymes that do not just have a protein component that makes up the bulk of it, but there is something else conjugated or attached to it for the enzyme to work

    1. Holoenzyme components

      1. Protein portion: apoenzyme – makes up majority of it and won’t work by itself; needs to be conjugated with something; won’t fit substrate

      2. Non-protein portion: partially fits into active site of apoenzyme to allow substrate to perfectly fit

        1. Cofactor – inorganic ions (heavy metals; iron, zinc, magnesium, calcium)

        2. Coenzyme – organic molecules (vitamin derivatives; NAD+, FAD, CoEnzyme A)

  • Cofactor/coenzyme + apoenzyme + substrate = functional holoenzyme


94
New cards

What are the 3 ways of naming an enzyme

  1. Usually ends in “-ase” → exceptions are pepsin and trypsin because they are older enzymes

  2. Describe substrate → lipases (break down lipids), proteases (break down proteins), nucleases (break down nucleic acids)

  3. Classified based on chemical reactions they catalyze


95
New cards

Describe the 6 Enzyme Classifications

  1. Oxidoreductase → oxidation reducation reaction

  2. Transferase → transfer of functional groups

    1. Transferring, adding, or removing carboxylic acid, alcohol groups, or organic functional groups

  3. Hydrolase → hydrolysis (add water to break bonds)

  4. Lyase → removal of atoms and breaking of bonds without hydrolysis

  5. Isomerase → rearrangement of the same components (Rubik's Cube)

  6. Ligase → joins 2 molecules together

    1. DNA ligase seals and joins nucleotides together


96
New cards

Define the 2 categories of enzymes for bacteria

  1. Exoenzymes → function outside the cell

    1. Important because bacteria are small and the substrate is too big to come into the cell, so nutrients are unable to come in

    2. Thus, bacteria releases exoenzymes from the cell to the external environment and breaks down the large substrates into smaller parts that can come through the peptidoglycan layer (cell wall), the cell membrane, and into the cell so the bacteria can utilize the nutrients and ingredients

  2. Endoenzymes → function inside the cell 

    1. Facilitate chemical reactions inside bacteria or fungi


97
New cards

Define the different between Constitutive Enzymes and Inducible Enzymes? Example of inducible enzymes in action

  1. Constitutive enzymes → produced at constant rates all the time because they facilitate the reactions of substrates that turn into essential products that microbes would die without

  2. Inducible enzymes → produced only when substrate is present and conserve energy

    1. Efficient way to control enzymes

    2. Ex. microorganism has ability to produce an enzyme that breaks down lactose; if living in an environment where lactose is available, it turns on genes to make the enzyme that breaks down lactose; if in an environment without lactose, it is a waste of energy to create the enzyme so it turns off the genes that create said enzyme


98
New cards

What are the 4 factors that influence enzymatic activity?

  1. Temperature

  2. pH

  3. Substrate Concentration

  4. Inhibitors


99
New cards

Describe temperature in terms of enzymes, what is the optimal temperature, what happens when increasing the temperature, what happens if it is too high, and what happens when lowering the temperature below the optimal temperature.

how much heat is put into a system

  1. Enzymes have an optimal temperature depending on where the enzyme is working in the cell (usually 37C or body temperature)

  2. Increasing the temperature increases the rate of collision and reaction (molecules move faster, increasing collisions, increasing energy generated to reach activation energy for a reaction to occur)

  3. Too high a temperature denatures an enzyme as the bonds that stabilize the protein in its quaternary or tertiary structure (H bonds, ionic, disulfide) are broken and the folded protein (alpha helices, beta pleated sheets, bends, turns) unravels to a polypeptide chain

    1. Unable to renature; enzyme rendered useless

    2. Reaction rate 0

  4. Lowering temperature after optimal temperature means decreasing collision rate, not denaturing it; enzymes slowed down so slow reaction


100
New cards

Describe pH in terms of enzymes, what would be examples of optimal pH, and what happens if there is extreme pH

  1. potential of hydrogen, how acidic or alkaline a solution is

    1. Enzymes have an optimal pH depending on where it’s going to work

      1. In stomach, lower optimal pH

      2. Blood close to neutral or slightly basic

    2. Extreme pH (too high or too low) denatures enzyme