1/27
Looks like no tags are added yet.
what is a glass
amorphous
disordered and not crystalline
ceramic
ionic/covalent/mixture
SRO
you may have the same composition but you can also have a
different lattice type
Amorphous materials show up on XRD as
an amorphous hump
X-ray scattering data general
apply more math to get more information out of the same data
how likely are we to encounter another atom at a given distance from our first atom
how disordered is it
r/d distance from start
g (r )- probability
amourpous xray scattering
high spike indicating nearest neighbor
lot more going on, levels out around one
@1 in x ray scattering
equally likely to have an atom at any position
crystalline x ray scattering
go up and right back down to under one
lot more organized
can think of glass as a
frozen liquid
Thermal energy
possessed by atoms above 0K
manifests as atomic vibrations
liquid state
atoms in this state have enough vibrational energy to overcome the energy barrier that allows atoms to move past one another and behave like a fluid
when liquids are cooled
atoms lose their thermal energy
makes atomic motion more difficult
viscosity increases
viscosity- resistance to flow
All solids are thermodynamically favored to solidiify as a
crystalline solid
lower energy state
exceptions to solidification
the energy barrier in these matierials to go from an amorphous liquid to an ordered crysalline solid can kinetically prevent this from occuring
activation energy hump too high
Transition glass
slowes possible cooling
slumping glass mirrors for telescopes
glass will slump and fit to the mold over time
due to being in the softening range
blown glass
at the working point
lower viscosity
heating and cooling schedules differ depending on
material
size
desired outcome
3 step kiln firing schedule
constant rate
constant temp vs time
specify as setting on kiln
Hold time
soak
horizontal temp vs time
annealing- type of soak that allows time for material to come to uniform temperature nad reduce/eliminated internal stress
Quench
vertical temp vs time
quickly cools entire part by imersing in cold water
faster cooling
locks atoms in faster to solid state
results in less density
slower cooling
results in higher density
apparent temperature that the structure is “locked in”
Tf- fictive temperature
approximation of refractive index
use electron density of a material
refractive index depends upon
atomic #
increase number increase electrons
crystal strcuture
density of solid
cooling rate
density based on fictive temperature
higher Tf- less dense; became a solid at a higher temperature
quench temperature = fictive temperature
quench you cool very quickly at specific teperature
locks in the structure at the quench temperature
they become equal
quench at a higher temp you get
lower density
lower density means
lower refractive index
modifiers and impact on properties
element that dont form 3+ covalent bonds iwth oxygen
form non-directional/weaker ionci bonds with higher coordination numbers
ex: NA ca K Mg Sr Ba Pb Li
Lowers the Tg
less energy required/save energy