1/19
Comprehensive vocabulary flashcards covering the components, operations, and maintenance procedures for RO/DI water systems, protein skimmers, and filter socks.
RO
Stands for Reverse Osmosis, a water purification process that uses pressure to force water through a membrane.
DI
Stands for Deionization, a stage in water purification that removes charged particles (dissolved ions) from water.
RO/DI Water
Highly purified water that has had most contaminants, particles, and dissolved ions removed, stored in a holding tank for aquarium use.
Osmosis
The movement of water molecules from an area with a high concentration of water molecules to an area with a lower concentration of water molecules through a partially permeable membrane.
Reverse Osmosis
A water purification process that uses pressure to force water through a special membrane that allows water to pass while rejecting dissolved substances and particles.
Deionization
A water purification process working after the reverse osmosis stage that removes dissolved ions and charged particles to produce highly purified water.
Holding Tank
The specific storage container identified as the final destination for finished RO/DI water.
Protein Skimmer
A piece of aquarium filtration equipment used to remove waste materials from aquarium water and deposit them into a collection cup.
Collection Cup
The part of a protein skimmer that collects waste material known as skimmate.
Neck
The area of a protein skimmer where foam rises toward the collection cup.
Drain (Protein Skimmer)
The component of a protein skimmer that allows collected liquid waste to drain.
Flow Control Knob
The knob on a protein skimmer used to adjust water flow through the skimmer.
Skimmate
The waste collected from aquarium water by the protein skimmer inside the collection cup.
Clockwise Knob Adjustment
Turning the protein skimmer flow control knob to the right to increase flow when the skimmer is underflowing.
Counterclockwise Knob Adjustment
Turning the protein skimmer flow control knob to the left to decrease flow when the skimmer is overflowing.
Filter Sock
A filtration material located on the overflow pipe inside the sump that catches debris and prevents large particles from continuing through the filtration system.
Bleach Soak
Day 1 of filter sock maintenance, involving soaking the rinsed dirty filter sock in a bucket with 41cup of bleach and water for 24hours.
Sodium Thiosulfate
A chemical compound used at an amount of 5grams to neutralize residual chlorine from the bleach treatment during filter sock cleaning.
Sodium Thiosulfate Soak
Day 2 of filter sock maintenance, where the rinsed sock is soaked for 24hours in a bucket containing 5grams of sodium thiosulfate dissolved in water.
Filter Sock Air Drying
Days 3 to 5 of filter sock maintenance, requiring the sock to air dry for at least 48hours until it is fully dry before reuse.