1/91
Looks like no tags are added yet.
hat is STP (Standard Temperature and Pressure)?
A standard reference condition for gases: temperature = 0°C (273 K) and pressure = 1 atm (101.3 kPa).
What is absolute zero?
The lowest possible temperature: 0 K or −273°C. At this temperature, particles have their minimum possible thermal motion.
What is atmospheric pressure?
The pressure exerted by the weight of the air in Earth's atmosphere.
What is pressure?
The amount of force applied over a given area. Gas pressure is caused by particles colliding with the walls of their container.
What does directly proportional mean?
When one variable increases, the other variable also increases, assuming other conditions remain constant.
What does inversely proportional mean?
When one variable increases, the other variable decreases.
What is a constant variable?
A variable that is kept the same during an experiment or investigation.
What is an independent variable?
The variable that is deliberately changed during an experiment.
What is a dependent variable?
The variable that is measured or observed during an experiment.
What are the two most abundant gases in Earth's atmosphere, and what percentages do they make up?
Nitrogen makes up approximately 78%, and oxygen makes up approximately 21%.
What percentage of Earth's atmosphere is made up of all the other gases combined?
Approximately 1%.
Which components of the atmosphere are relatively constant, and which are variable?
Nitrogen and oxygen are relatively constant. Water vapour, carbon dioxide, and other trace gases can vary.
What are two variable components of the atmosphere?
Water vapour and carbon dioxide.
Did Earth's early atmosphere contain oxygen?
No. Earth's early atmosphere contained very little free oxygen.
What organisms introduced oxygen into Earth's atmosphere?
Cyanobacteria, which are photosynthetic bacteria.
What process produced the oxygen?
Photosynthesis.
How did atmospheric oxygen gradually increase?
Early photosynthetic organisms released oxygen as a waste product. Over millions of years, oxygen accumulated in the oceans and eventually the atmosphere.
What has happened to carbon dioxide levels since the Industrial Revolution?
Carbon dioxide levels have increased significantly.
What human activities increase carbon dioxide levels?
Burning fossil fuels (coal, oil, and natural gas), deforestation, and burning forests.
Why is the increase in carbon dioxide a concern?
Carbon dioxide is a greenhouse gas that traps heat in the atmosphere. Increasing concentrations contribute to global warming and climate change.
What is air pollution?
The contamination of air by harmful gases and small solid or liquid particles in concentrations that can endanger health.
What are four major sources of air pollution?
Transportation, power and heat generation, industrial processes, and burning solid waste.
What is the difference between anthropogenic and natural sources of air pollution?
Anthropogenic sources are human-made, such as vehicle exhaust. Natural sources occur naturally, such as volcanic eruptions.
What are six major air pollutants, and what are they?
Carbon monoxide (CO): Colourless, odourless pollutant mainly produced by road transportation.
Hydrocarbons: Produced when gasoline is not completely burned; contribute to smog.
Nitrogen oxides (NOx): Released by vehicles and power stations; contribute to acid rain and photochemical smog.
Ozone (O₃): Harmful form of oxygen produced when nitrogen oxides and hydrocarbons react in sunlight.
Particulates: Small solid or liquid particles, such as soot, dust, and fumes.
Sulfur dioxide (SO₂): Colourless gas mainly released by power stations and industry; contributes to acid rain.
What is smog, and how does it form?
Smog is a form of air pollution. Historically, it referred to a mixture of smoke and fog. Photochemical smog forms when nitrogen oxides and hydrocarbons react in sunlight.
What was the Great London Smog of 1952?
Smoke and fog became trapped over London, causing severe air pollution and killing approximately 4,000 or more people.
What were two changes introduced by the Clean Air Acts of 1956 and 1968?
They reduced the burning of coal in homes and encouraged gas use, encouraged factories to be built away from populated areas, and introduced taller chimneys at power stations to disperse pollutants. (Any two.)
How does photochemical smog form, and what is its main pollutant?
It forms when hydrocarbons and nitrogen oxides react in the presence of sunlight. Ozone is the main pollutant.
What is a catalytic converter?
A device in vehicle exhaust systems that changes harmful pollutants into less harmful substances.
What are three alternatives to gasoline and diesel?
Natural gas, liquid petroleum gas (LPG), hydrogen, alcohol, and battery power. (Any three.)
What are two ways to reduce transportation-related air pollution?
Walking or cycling instead of driving, using public transportation, limiting vehicle access to city centres, and building workplaces closer to residential areas. (Any two.)
How does sulfur dioxide contribute to acid rain?
Sulfur dioxide combines with water in the atmosphere to produce sulfuric acid, which falls to Earth as acid rain.
How do nitrogen oxides contribute to acid rain?
Nitrogen oxides combine with water to form nitric acid, which contributes to acid rain.
What are three environmental effects of acid rain?
It erodes buildings, makes lakes and streams acidic (harming aquatic organisms), damages or kills vegetation, and harms wildlife. (Any three.)
What are two health effects of air pollution?
Breathing difficulties, chest pain, headaches, eye irritation, and other health problems. Long-term exposure can contribute to serious illnesses, including cancer.
Why are children, elderly people, and people with asthma more vulnerable to air pollution?
Their bodies may be more vulnerable to pollutants. People with asthma may experience worsening breathing difficulties when exposed to pollution.
How does air pollution affect vegetation?
It can damage vegetation and reduce plant growth, particularly in city centres.
What was the purpose of the Kyoto Accord (Kyoto Protocol)?
It was an international agreement in which countries agreed to reduce greenhouse gas emissions to help reduce the effects of global warming.
How does carbon dioxide contribute to global warming?
Carbon dioxide is a greenhouse gas that traps heat in Earth's atmosphere. As its levels increase, more heat is retained, contributing to global warming.
Convert 25°C to Kelvin.
K = 25 + 273 = 298 K.
Convert 100°C to Kelvin.
K = 100 + 273 = 373 K.
Convert −40°C to Kelvin.
K = −40 + 273 = 233 K.
Convert 300 K to Celsius.
°C = 300 − 273 = 27°C.
Convert 0 K to Celsius.
°C = 0 − 273 = −273°C.
Convert 450 K to Celsius.
°C = 450 − 273 = 177°C.
Convert 2.5 atm to kPa.
2.5 × 101.3 = 253.25 kPa.
Convert 85.0 kPa to atm.
85.0 ÷ 101.3 = 0.839 atm.
Convert 1.75 atm to mmHg.
1.75 × 760 = 1330 mmHg.
Convert 950 mmHg to atm.
950 ÷ 760 = 1.25 atm.
Convert 650 torr to kPa.
650 ÷ 760 × 101.3 = 86.7 kPa.
Convert 120 kPa to torr.
120 ÷ 101.3 × 760 = 900.3 torr.
Convert 1.25 atm to torr.
1.25 × 760 = 950 torr.
Convert 500 mmHg to kPa.
500 ÷ 760 × 101.3 = 66.6 kPa.
Atmospheric pressure is 101.3 kPa, and the mercury level is 125 mm higher on the atmospheric side. Find the gas pressure.
Convert 125 mmHg to kPa: 125 ÷ 760 × 101.3 = 16.65 kPa. Gas pressure = 101.3 + 16.65 = 118.0 kPa.
Atmospheric pressure is 760 mmHg, and the mercury level is 85 mm higher on the gas side. Find the gas pressure.
760 − 85 = 675 mmHg.
Atmospheric pressure is 98.5 kPa, and the mercury level is 120 mm higher on the gas side. Find the gas pressure.
Convert 120 mmHg to kPa: 120 ÷ 760 × 101.3 = 15.99 kPa. Gas pressure = 98.5 − 15.99 = 82.5 kPa.
Atmospheric pressure is 755 mmHg, and the mercury level is 65 mm higher on the atmospheric side. Find the gas pressure.
755 + 65 = 820 mmHg.
When do you add or subtract the pressure difference in a manometer?
Add when the mercury level is higher on the atmospheric side. Subtract when the mercury level is higher on the gas side.
A gas is compressed into a smaller container while temperature stays constant. Which gas law applies?
Boyle's Law.
A balloon is heated and its volume increases while pressure stays constant. Which gas law applies?
Charles's Law.
A sealed container is heated while its volume stays constant. Which gas law applies?
Gay-Lussac's Law.
A gas changes in temperature, pressure, and volume. Which gas law applies?
Combined Gas Law.
Volume decreases as pressure increases while temperature stays constant. Which gas law applies?
Boyle's Law.
A balloon expands when heated and contracts when cooled while pressure stays constant. Which gas law applies?
Charles's Law.
A sealed aerosol can is heated while its volume stays constant. Which gas law applies?
Gay-Lussac's Law.
A gas changes temperature and pressure while its volume stays constant. Which gas law applies?
Gay-Lussac's Law.
A gas has a volume of 4.0 L at 100 kPa. Its pressure increases to 200 kPa while temperature stays constant. Find the new volume.
Boyle's Law: P₁V₁ = P₂V₂. (100 × 4.0) = (200 × V₂). V₂ = 400 ÷ 200 = 2.0 L.
A gas has a volume of 2.5 L at 20°C. It is heated to 80°C while pressure stays constant. Find the new volume.
Charles's Law: V₁/T₁ = V₂/T₂. T₁ = 293 K and T₂ = 353 K. V₂ = (2.5 × 353) ÷ 293 = 3.01 L.
A gas has a pressure of 95 kPa at 25°C. It is heated to 100°C in a rigid container. Find the new pressure.
Gay-Lussac's Law: P₁/T₁ = P₂/T₂. T₁ = 298 K and T₂ = 373 K. P₂ = (95 × 373) ÷ 298 = 118.9 kPa.
A gas has a volume of 3.0 L at 100 kPa and 300 K. It changes to 150 kPa and 400 K. Find the new volume.
Combined Gas Law: P₁V₁/T₁ = P₂V₂/T₂. V₂ = (100 × 3.0 × 400) ÷ (300 × 150) = 2.67 L.
A gas has a volume of 5.0 L at 150 kPa. It is compressed to 2.0 L while temperature stays constant. Find the final pressure.
Boyle's Law: P₁V₁ = P₂V₂. (150 × 5.0) = P₂ × 2.0. P₂ = 750 ÷ 2 = 375 kPa.
A gas has a volume of 1.8 L at 15°C. It is heated to 45°C while pressure stays constant. Find the new volume.
Charles's Law: V₁/T₁ = V₂/T₂. T₁ = 288 K and T₂ = 318 K. V₂ = (1.8 × 318) ÷ 288 = 1.99 L.
A gas has a pressure of 110 kPa at 20°C. It is heated to 120°C in a sealed container. Find the final pressure.
Gay-Lussac's Law: P₁/T₁ = P₂/T₂. T₁ = 293 K and T₂ = 393 K. P₂ = (110 × 393) ÷ 293 = 147.6 kPa.
A gas has a volume of 6.0 L at 25°C and 100 kPa. It changes to 80 kPa and 50°C. Find the final volume.
Use the combined gas law: P₁V₁/T₁ = P₂V₂/T₂. T₁ = 298 K and T₂ = 323 K. V₂ = (100 × 6.0 × 323) ÷ (298 × 80) = 8.12 L.
A gas has a volume of 2.5 L at 200 kPa and 350 K. It changes to 4.0 L and 280 K. Find the final pressure.
Use the combined gas law: P₁V₁/T₁ = P₂V₂/T₂. P₂ = (200 × 2.5 × 280) ÷ (350 × 4.0) = 100 kPa.
What happens to gas volume when pressure increases at constant temperature? Explain using particle theory.
Volume decreases. Increasing pressure forces gas particles into a smaller space, bringing them closer together.
Why does pressure increase in a sealed container when temperature increases?
Heating increases the kinetic energy of gas particles. They move faster and collide with the container walls more frequently and with greater force, increasing pressure.
What is the difference between Boyle's Law and Charles's Law?
Boyle's Law describes the inverse relationship between pressure and volume at constant temperature. Charles's Law describes the direct relationship between volume and temperature at constant pressure.
What does inversely proportional mean? Give a gas law example.
When one variable increases, the other decreases. Example: As pressure increases, gas volume decreases (Boyle's Law).
What does directly proportional mean? Give a gas law example.
When one variable increases, the other also increases. Example: As temperature increases, gas volume increases at constant pressure (Charles's Law).
Why must Kelvin be used in gas law calculations?
Kelvin is an absolute temperature scale that begins at absolute zero. Gas law calculations require temperatures measured from absolute zero rather than Celsius.
Why doesn't increasing temperature always increase gas pressure?
n a sealed, rigid container, increasing temperature increases pressure. However, in a flexible container, the volume may increase instead while pressure stays relatively constant.
Evangelista Torricelli invented it in 1643.
How does a mercury barometer measure atmospheric pressure?
Atmospheric pressure pushes down on mercury in a reservoir, supporting a column of mercury inside a tube. The column's height indicates atmospheric pressure.
Why does atmospheric pressure decrease at higher altitudes?
There is less air above you, so the weight of the air pressing down is lower.
Why is mercury used in barometers?
Mercury has a high density, so a relatively short column can balance atmospheric pressure.
What happened to the oxygen produced by cyanobacteria before it accumulated in the atmosphere?
It first accumulated in the oceans and reacted with dissolved iron and rocks.
What were oxygen sinks?
Substances such as dissolved iron and rocks that reacted with and absorbed oxygen before it could accumulate in the atmosphere.
Approximately when did oxygen begin building up in Earth's atmosphere?
Around 2.2–2.1 billion years ago, after many oxygen sinks became saturated.
Who was Robert Boyle, and when did he publish his pressure-volume findings?
Robert Boyle (1627–1691) was an Irish-born natural philosopher and early chemist. He published his pressure-volume findings in 1662.
Who was Jacques Charles, and what was he known for?
Jacques Charles (1746–1823) was a French physicist, inventor, and mathematician who helped design and pilot early hydrogen balloons in 1783.
What are four common mistakes to avoid when solving gas law problems?
Using Celsius instead of Kelvin, changing a variable that should remain constant, mixing up initial and final values, and forgetting units.