1/37
Comprehensive practice flashcards covering coastal processes, seafloor morphology, plate margin controls, shoreline types, coastal engineering solutions, hurricanes, and coastal hazards based on Lecture 15.
What are the three main coastal processes?
1) Erosion, 2) Deposition, and 3) Sea level changes.
What four factors influence changes in coastal morphology and dynamics?
Ocean currents, wave intensity, coastal stability (sinking or rising), and the type of rocks along the shores.
What are the primary causes of coastal erosion, tropical cyclones, and rip currents?
Coastal erosion is caused by waves, currents, and tides; tropical cyclones are caused by storms; and rip currents are caused by ocean waves.
What are the main characteristics of continental shelves?
They are the shallow portions of the ocean (∼500m deep), broad along passive continental margins, narrow along active continental margins, formed by cycles of deposition and erosion, and can be covered by coral reefs.
How are continental slopes defined in terms of depth, slope, and crustal boundary?
Continental slopes mark the edge of continental crust, reach an ocean depth of ∼2km, and possess a slope of ∼2∘.
What is a continental rise and what does it consist of?
It is an area where the seafloor slope decreases between 4 to 4.5km depth, consisting of oceanic crust beneath submarine fan sediments.
What is an abyssal plain and what features are found on it?
It is the nearly horizontal, vast deep seafloor located between the continental rise and oceanic ridges at water depths of 3 to 6km, composed of linear hills, transform fault traces, normal fault scarps, and sediment-filled grabens.
What are mid-ocean ridges and what are their physical dimensions?
They are seafloor spreading centers and underwater mountain ranges roughly 1500km wide and 3km above the surrounding ocean floor, characterized by extensional grabens, transform faults, volcanism, and earthquakes.
Where are deep-sea trenches located and what geological process occurs there?
They are the deepest places in the ocean, located at convergent plate boundaries where oceanic lithosphere subducts into the mantle.
What causes the formation of a sand shoreline through erosion?
Wave action carrying away finer sediment.
What is the source of clasts and gravel found on gravel shorelines?
They are derived from the erosion of adjacent cliffs.
Under what shoreline conditions do wave-cut notches and wave-cut benches develop?
They develop along rocky shorelines where sea-cliff bedrock is resistant; the wave-cut bench is exposed at low tide.
How does tectonic activity at an active margin shape coastal morphology, and what is an example?
Compressional force squeezes the crust and pushes it up, resulting in steep cliffs and rocky coasts (e.g., the Andes mountain in South America).
How does tectonic activity at a passive margin shape coastal morphology, and what is an example?
Cooling and sinking oceanic lithosphere merges with the continental shelf, producing a broad coastal plain and sandy beach (e.g., the Southeastern coast of the US).
What distinguishes active margins from passive margins regarding plate boundaries?
On an active margin, continental edges coincide with tectonic plate boundaries (e.g., Western coast of South America); on a passive margin, the continental margin does not coincide with a plate margin (e.g., both sides of the Atlantic).
What type of coast results from sea-level rise?
A submergent coast.
What defines an erosional coast in terms of sediment supply and resulting landforms?
Erosion is faster than sediment supply (the sea washes sediment away faster than it is supplied), causing coasts to recede landward and forming rocky coasts (e.g., the Andes).
What defines an accretionary coast in terms of sediment supply and resulting landforms?
Sediment supply is faster than erosion (coasts receive more sediment than erodes away), causing coasts to grow seaward and forming broad sandy beaches (e.g., the East Coast of the USA).
What are the two levels of ocean current circulation?
1) Surface current circulation (affects the upper 100m of water) and 2) Deep current circulation (keeps deep/bottom water in motion).
What is the driving mechanism of ocean waves, and what three factors determine wave energy?
The driving mechanism is wind energy. Wave energy depends on: 1) Wind speed, 2) Length of time wind has blown, and 3) Distance wind traveled across open water.
Why do ocean waves break on the shoreline?
1) The wave slows down, 2) The top of the wave becomes unstable, and 3) The top of the wave moves faster than the base.
What two processes are caused by wave refraction when waves approach the shoreline at an angle?
1) Longshore current, and 2) Transport of sediment parallel to the beach in a zigzag pattern (beach drift of sand).
How does wave refraction affect erosion and deposition along an irregular shoreline?
It concentrates maximum wave energy on headlands (causing erosion) and reduces wave energy in embayments (causing deposition).
What causes ocean tides, and what changes do they produce?
Tides are caused by the gravitational forces of the Moon and the Sun; they produce changes in sea level, sediment deposits, and coastal area.
How do spring tides differ from neap tides during the monthly lunar cycle?
Spring tides (occurring during new moon and full moon) produce a large daily tidal range, whereas neap tides produce the least daily tidal range.
What movement of the shoreline occurs during high tide versus low tide, and what is the largest recorded tidal reach?
High tide moves the shoreline inland (largest tidal reach is 16.8m), while low tide moves the shoreline seaward.
What is a jetty and what is its purpose in coastal engineering?
A structure extending into the ocean used to maintain harbors and prevent sediment deposition.
What is a groin and what is its purpose?
A structure that extends into the ocean built to maintain or widen beaches by trapping sand.
What is a breakwater and how does it influence the shoreline?
An offshore barrier built parallel to the coast that reduces wave energy, allowing the beach to grow seaward behind the breaker.
What is a seawall and what are its functions?
A barrier (such as concrete blocks) built parallel to the shore that stops waves from reaching the beach behind the wall and prevents erosion.
What is beach nourishment and what is its primary limitation?
It is the addition of sand to a beach; its limitation is that it is only economically viable in a few areas.
What is the meaning and language origin of the word 'hurricane'?
It means 'big wind' or 'evil spirit' in the Caribbean Indian language.
What are the sequential stages in the formation of a tropical storm?
Air absorbs ocean moisture; warm air rises, cools, and condenses into clouds; clouds form a cluster of thunderstorms; thunderstorms consolidate into a single large storm; Coriolis force spins it into a rotating swirl (tropical disturbance/storm).
What typical size and strength do mature hurricanes attain?
A size of 100 to 1,500km and a wind strength of 230km/h.
What are hurricane-like storms called in the Northern Indian Ocean versus the Western Pacific Ocean?
They are called Cyclones in the Northern Indian Ocean and Typhoons in the Western Pacific Ocean.
What are the four destructive components of a hurricane, and which kills the most people?
High-velocity winds, enormous waves, storm surge, and intense rainfall; flooding from rainfall kills the most people and causes the most damage.
What adjustments can reduce hurricane damage?
Developing 'Hurricane-hazard maps' and building protective structures (such as elevated homes designed to allow storm surge to pass underneath).
What is a rip current and why is it dangerous?
A rip current is water concentrating in a narrow zone along shorelines that flows rapidly offshore; it can pull people out into deep water and kills ∼200 people a year in the US.