1/33
Looks like no tags are added yet.
Define the Aerodrome control requirements
Aerodrome control towers issues clearances, instructions and informations to aircraft under their control to achieve a safe, orderly, and expeditious flow of air traffic on and in the vicinity of a aerodrome, with the object of preventing collision between:
Aircraft flying in the designated area of responsibility of the tower (incl. circuit)
Aircraft operating on the manoeuvring area
Aircraft landing and take off
Aircraft, vehicles and personnel operating on manoeuvring area
Aircraft on manoeuvring area and obstructions no that area
Traffic is controlled in accordance with procedures in MATS and promulgated traffic and circuit rules to maintain separations according to RAC 5.
What do clearances and instructions achieve when separation is not required?
When separation is not required, such as in different airspace classes, clearances and instructions shall achieve a safe and orderly flow of air traffic and provide the foundation for effective traffic information.
When necessary due to traffic demand or workload, route and/or level instructions may be issued to minimise the need for detailed traffic information.
What are RUNWAY BLOCKED strips and why are they used?
They are a red strip, with yellow border, with RUNWAY BLOCKED in the centre.
A controller shall display a blocking strip, aircraft flight progress strip, or a marker on the area of the flight progress board that represents the RWY to indicate a RWY is blocked/in use.
Used as a positive reminder that the RWY is blocked for aircraft, personnel, equipment, or vehicles that have permission to occupy or cross a RWY or RWY work zone.
Give five examples of information that should be included in an ATS Log Book
Emergency, ELT and other SAR actions
Change in status of ATS services, navigation facilities, procedures
Staff absences or sickness
Comments, accolades, complaints from the public
Unusual events or situation at adjacent units
Incidents, accidents, non-compliance with regulations or ATC clearances
Do VFR arrival and departure clearances follow the same format as other clearances?
Yes/True, if they do not, then false
Callsign
Authorization
Clearance limit
Route
Limit
Other instructions
What are VFR arrival and departure procedures?
VFR aircraft need a clearances to enter or leave a CTR (+ local traffic info for departing)
This includes specific instructions on how and where to enter/leave the traffic circuit.
Clearance to join the circuit directly or at a specific point
Clearance to an intermediate point, from which a clearance into the circuit might be expected
Clearance to leave CTR via significant point or directly
What parts of clearances should pilots read-back?
ATC route clearances
Clearances and instructions to operate on the manoeuvring area at a controlled aerodrome.
Clearances to land, take off, enter, cross or taxi on or backtrack of any RWY.
Instructions to remain on or hold clear of any RWY.
Taxing instructions including taxi route and holding positions where specified.
RWY in use
Altimeter settings
SSR codes
Level instructions
Heading and speed instructions
Frequency (following any instructions of frequency change)
What is the responsibility of ATC regarding read backs?
ATC are to constantly monitor read backs and shall ensure a correct read back of safety-related parts of clearances and instructions, and take immediate action to correct discrepancies.
What is the requirement of those wishing to enter or operate on the manoeuvring area?
Traffic conditions and any conditions specified by the aerodrome operator.
This may be required to be briefed to all personnel proceeding onto the manoeuvring area as follows:
Stop and wait for permission by radio or light signal before moving onto the manoeuvring area, and before crossing or moving onto any RWY, Gr RWY, or taxiway.
Watch for and giveaway at all times to aircraft
Look for signals from the tower, incl. RWY lighting actions
Define the light signals for vehicles
Steady green - Permission to move onto manoeuvring area, RWY, landing area, or taxiway as briefed.
Steady red - Stop
Green Flashing - Increase speed in same direction
Red Flashing - Move off RWY, landing area, taxiway, and watch out for aircraft
White flashes - Report to tower via perimeter road
Flashing RWY/Taxiway lighting - Vacate RWY or taxiway and observe tower for light signals (if signal not seen or in emergency)
Define the light signals for Aircraft
Steady Green - Cleared to land (Air) or Cleared for take off (Ground)
Steady red - Give way to other aircraft and continue in the aerodrome traffic circuit (Air) or Stop (Ground)
Green flashes - Return for landing (Air) or Cleared to taxi (Ground)
Red flashes - Aerodrome unsafe do not land (Air) or Taxi clear of the landing area in use (ground)
White flashes - Land at this aerodrome and proceed to apron (Air) or Return to starting point on aerodrome (ground)
Alternating red & green - Danger, be on alert (Air & ground)
What factors are to be considered when determining the RWY in use?
Factors SAAAN
Aerodrome traffic circuits
Available RWY length
Position of the sun
Approach and landing aids available
Potential noise nuisance or noise abatement procedures
*Wind, lighting, terrain, sun, weather conditions
What does the “RWY in use” refer to?
The RWY considered by the controller to be most suitable, at that particular time, for use by the types of aircraft expected to land and take off from it.
Who shall be coordinated with in the event of a runway change? Notably the selection time.
Prior coordination with APP is required when changing the runway in use. The selection and timing of RWY change.
Additionally between TWR, SMC, APP and the aircraft.
When is POB information passed and how is it recorded?
Pilots of shall advise the POB to ATS prior to taxiing on to the manoeuvring area (departing aircraft) or when first establishing RTF communication with aerodrome control (arriving aircraft)
Recorded on flight progress strips RAC 9
How are requests for start up approved?
When no delay is expected: “Start up approved”
When delay possible, controller to determine extent of delay and issued delayed start up time: “Start up at (time)”, “Expect start up at (time)”, “Expect departure at (time), start up at own discretion”.
When should local traffic information be provided to aircraft?
Pilots shall be advised of any aircraft, vehicle and personnel on or near the manoeuvring area, or traffic in the vicinity of the aerodrome that may constitute a hazard to the aircraft concerned.
Traffic described in manner that facilitates sighting and recognition
Traffic info to be issued in timely manner (safety or pilot request)
What are the elements of a taxi clearance?
pASTRAMI
Aircraft callsign
Local traffic info or taxi sequence instructions
Taxi clearance (authorisation and clearance limit)
RWY to be used
Aerodrome conditions*
MET info or ATIS*
For IFR flights: TIME (min) unless a time check has already been given.
What clearance is provided when a taxi clearance goes beyond or over a RWY?
Explicit clearance is required to cross, taxi or backtrack a RWY.
Cross RWY/Seal/Grass (number)
Cross RWY (number) Report vacated
Cross all RWYs
Who is Aerodrome Conditions Information provided to and what does it include?
Essential information on aerodrome conditions shall be given to every aircraft, expect if known that they have already received the information.
Construction or maintenance on/adjacent to movement area
Rough or broken surfaces (RWY, TWY, Apron)
Water or contaminants on the RWY, TWY, Apron, and their effect on braking ability.
Snow banks or drifts adjacent to RWY, TWY, Apron
Other temporary hazards (birds)
Failure or irregular operation of aerodrome lighting service
Any other pertinent information
How may helicopters taxi around an aerodrome and what risk is there?
Ground taxi or Air taxi.
Generate significant downwash and turbulence while hovering and air taxiing
Recommended to avoid taxiing light aircraft and helicopters within a minimum of 3 times the diameter of the helicopters rotor (stationary hover or air-taxiing
Define ATIS
Automatic Terminal Information Services
Automatic broadcast to provide pilots essential information (e.g. weather, conditions, RWY in use, etc.)
What would necessitate the ATIS being revised and updated?
Instrument approach is changed
Take off or landing RWY is changed
RWY condition report is changed
Changes to operational status of aerodrome and facilities
Meteorological conditions change through or by the criteria in MET section “Take off and landing report revision criteria”
What are the elements of a conditional line up clearance?
A conditional clearance is a clearance which is only valid if certain conditions are met.
Callsign
Condition
Clearance
Brief reiteration of the condition
ABC behind the Cherokee on short final line up behind.
List and briefly define the parts of a circuit
Upwind leg
Crosswind leg
Downwind leg
Base leg
Final approach
Circuits usual height is 1,000ft if not specified
What provisions must be in place for a qualified clearance?
Separation must exist at the time the aircraft starts its take off roll.
During daylight hours, and;
Visibility is 5km or greater, and;
There is reasonable assurance that the appropriate runway separation will exist at the time the departing aircraft commences takeoff, and;
Pilot is advised of the preceding departing or landing aircraft (personnel, vehicle crossing, vacating the RWY), and will be able to keep it in sight until RWY separation is in place.
Phraseology for an aircraft to abandon takeoff
Should a take-off clearance need to be cancelled prior to an aircraft commencing take-off roll: “Callsign, HOLD POSITION< CANCEL TAKE_OFF I SAY AGAIN CANCEL TAKE-OFF (reason)”
If required once take off roll has commenced (only where aircraft is in imminent danger): “Callsign, STOP IMMEDIATELY, repeat callsign, STOP IMMEDIATELY (reason)”
Decision to reject take off remains with the pilot.
What shall controllers do to ID and correlate aerodrome traffic?
Controllers shall maintain a continuous watch of all flight ops on and in vicinity of the aerodrome, as well as vehicles and personnel on the manoeuvring area.
Visual observation + augmented by ATS surveillance system
Aircraft type and distinctive markings
Position reports, direction of flight or reported manoeuvres
At night, requesting an aircraft to show a distinctive light (e.g. - landing light)
List the various methods available for joining and sequencing aircraft in the circuit
Enter the circuit at a specified position and or level
Follow a specified circuit or part circuit
Hold over a specified position
Orbit (R/L) from a particular position
Extend or shorten legs of the circuit
Follow any other specified manoeuvre or combinations of the above compatible with safety
Enter, Follow, Hold, Orbit, Extend, Freestyle safely
When issuing sequencing instructions for joint a circuit, what limitations of the pilot must be considered?
The field of vision from the cockpit, and
The contrast formed by an aircraft and its background, and
Glare from the sun, and
Restricted visibility caused by haze or other conditions, and
The possibility of misidentification of the subject aircraft
If there is any doubt, or if the pilot reports difficulty in sighting the aircraft, action shall be taken to ensure that adequate separation is maintained.
List the elements of a landing clearance is correct order
Aircraft callsign
Any significant changes in MET information already given to aircraft
RWY surface conditions
Other temporary hazards (presence of birds)
Any special information/instructions relating to turning off the RWY after landing
Cautionary advice of wake turbulence
Any qualification applicable to the clearance
RWY (Gr, Seal, RWY) Number .
CLEARED TO LAND
What is required with a start up time or delay approval for IFR flight not GNSS equipped?
A time check for IFR aircraft only (not GNSS equipped)
“TIME NOW (min)”
Normally an aircraft takes off into wind except for what reasons?
Take off/land into the wind unless for safety conditions, RWY configuration, MET conditions, traffic conditions, or instrument approach availability deem otherwise.
Define adéquate separation
The spacing required to maintain the safe operation of aircraft, or to achieve runway and wake turbulence separation without the need for sudden or violent manoeuvres.