1/12
Looks like no tags are added yet.
how do we achieve the highest magnification with a given lens
object should be as close as possible to focal point on object side
what happens when we decrease the object distance from the lens
image size decreases
the closer the image is to the lens = smaller image - magnification less/drops
how do we achieve the greatest field of view with a magnifying glass/single lens magnifier - and why is this not always practical
holding the lens as close to the eye as possible
gives us a greater field of view - even though magnification itself doesn’t change
not always practical to position our eyes so close to the lens - when reading cannot be bending down etc. - some px may be physically unable to do so too
slides 14,15,16
when u hold the mag lens at one focal length dst in front of eye -
define magnification
Ratio between the retinal image and the image seen with the naked eye
describe angular magnification
Is used for telescopic devices (for distance vision)
Angular magnification is the ratio for the angle subtended by the image to that subtended by the object
Here: M=β/α or DObjective/ Docular; where D is the diameter
Describe nominal magnification and what it assumes
The magnifier formulae assumes that the image size through the eye+magnifier (with a working distance of one focal length from the magnifier) is compared with the image size when the object is viewed unaided at a distance of 250 mm from the eye
Emmetropic or distance corrected eye
Reference seeing distance 250mm
Distance between magnifier and eye is equal to the focal length of the magnifier
Calculation: M=F/4
Considering above formula and its definition: when using a lens at different working distance the magnification achieved might be different than the nominal magnification