1/50
Comprehensive vocabulary flashcards covering Bowman Power Distribution Units, charging units, batteries, HF and VHF radio parameters, operational modes, and Key Distribution Equipment (BKVMS).
PDU 6/16
The two types of Power Distribution Units (PDUs) utilized within the Bowman system.
PDU Load Capacities
The total load capacity ratings available for Bowman PDUs, specified as 50A and 150A.
PDU Socket Load Capacity
The individual current capacity rating for each socket on a Bowman PDU, which is 25A.
PDU Operating Voltage Range
The operational direct current voltage range for PDUs, which is 18−32VDC.
PDU Protection Measures
The five built-in electrical protection measures of the PDU: input over current, output over current, voltage surges, reverse polarity conditions, and EMP.
DCCU (Direct Current Charging Unit)
A battery charging unit with an operational voltage range of 10−32VDC.
ACCU (Alternating Current Charging Unit)
A mains-powered charging unit with an operational voltage range of 85−275VAC.
DCCU/ACCU Charging Modes
The three selectable charging modes provided by the DCCU and ACCU: Fast, Slow, and PSU.
Fitted For Radio (FFR) Vehicle Voltage
The operational system voltage of a Fitted For Radio vehicle, which is 24V.
Bowman HUB Battery Voltage
The standard voltage rating of a Bowman HUB battery, which is 3.6V.
Radios Without Rechargeable HUB Batteries
The two Bowman radio types that do not feature a rechargeable HUB battery: HF and UHF.
HF Radio Variants
The three recognized variants of the Bowman High Frequency radio: MP 050, MP 051, and RE 051.
HF Radio Frequency Range
The operational frequency coverage of the HF radio, spanning from 1.6−29.9999MHz.
HF Radio Preset Capacity
The total number of channel presets that can be stored in the HF radio, which is 6.
HF Radio CI Editions Capacity
The maximum volume of Cryptographic Information (Editions) an HF radio can retain, which is 3months.
HF Radio Operating Voltage Range
The operational direct current voltage requirements for the HF radio, rated at 19.5−32VDC.
HF Modes of Operation
The four distinct operating modes available on the HF radio: Fixed, Hop, ALE, and 3G.
VRC 329 Power Source
Receives its electrical power from the High Power Amplifier (HPA) via the PDU.
PPS (Pre Post Selector)
The dedicated piece of equipment added to the Co-Site variant of the HF radio installation.
3G ALE ToD Roles
The two Time of Day (ToD) roles designated when operating in 3G ALE mode: Base and Outstation.
AAC (Antenna Tuning)
A unit whose primary purpose is to electronically match the length of the antenna to the specific frequency in use.
3G ALE Time Synchronisation Window
The allowable time synchronization variance for operating in 3G ALE mode, which is ±7minutes.
HF Hop Mode Time Synchronisation
The maximum acceptable time synchronization window required for HF Hop mode, which is 90seconds.
3G ALE Sync States
The three operational synchronization states when running 3G ALE: Manual, Auto, and None.
CARC (Chemical Agent Resistant Coating)
The specialized protective paint covering the exterior surfaces of the Bowman HF radio.
HF MP Variant Power Outputs
The three selectable transmission power levels available for the Manpack (MP) variants: 1Watt, 5Watts, and 20Watts.
HF RE Variant Power Outputs
The three transmission power output ratings for the Remote (RE) variant: 10Watts, 30Watts, and 100Watts.
VHF Radio Configurations
The six standard deployment configurations of the VHF radio: PRC 354, PRC 355, PRC 356, PRC 357, PRC 358, and PRC 359.
VHF Radio Frequency Range
The operational frequency spectrum of the Bowman VHF radio, spanning from 30−87.975MHz.
VHF Radio Presets
The total number of preset channels supported by the VHF radio, which is 6.
VHF COMSEC Periods Capacity
The operational duration of Cryptographic Information (COMSEC Periods) held by the VHF radio, amounting to 3months.
VHF Channel Width and Total Channels
A channel spacing of 25kHz, which provides a total of 2320 discrete channels.
VHF Radio Operating Voltage Range
The direct current input range required to power the VHF radio, specified as 18−32VDC.
VHF Modes of Operation
The four functional operating modes of the VHF radio: Fixed Frequency (FF), Frequency Hopping (FH), Free Channel Search (FCS), and Clear Hail (CH).
VHF EPM Modes
The two modes classified as Electronic Protective Measures (EPM) on the VHF radio: Frequency Hopping (FH) and Free Channel Search (FCS).
VHF NET Synchronisation Time Differences
The two distinct operational timing offset thresholds required for VHF NET synchronization: 6seconds and 60seconds.
Clear Hail
A procedure and channel mode that allows an insecure radio to alert a secure radio of its presence.
VHF Vehicle Amplifiers
The two types of power amplifiers used with vehicle-mounted VHF radios: IFPA and RFPA.
Purge Hail Residual Data
The two items that remain in the VHF radio memory if a user fails to execute 'Enter to Purge Hail': Hail frequency and base time.
KDE (Key Distribution Equipment)
A cryptographic distribution system composed of two integrated hardware devices: the PCON and KTD.
CAR (COMSEC Accounting Record)
An auditable administrative and cryptographic accounting ledger generated for communications security tracking.
CIFD CAR Capacity
The maximum number of COMSEC Accounting Records (CAR) that can be stored on a CIFD, which is 10,000.
KFD CAR Capacity
The total volume of COMSEC Accounting Records (CAR) that can be held on a KFD, which is 5,000.
CIFD Black Keys
The three categories of encrypted black keys maintained inside the CIFD: TEK, TSK, and GPS.
CIFD Primary Function
To accept, store, and transfer Cryptographic Information (CI).
CIFD Secondary Function
To generate COMSEC Accounting Records (CAR) for all transactions, with the sole exception of VAGR.
Selective Fill by Radio Role ID
The specific fill type and identifying parameter utilized when loading cryptographic data into a radio from a CIFD.
KFD KEK Capacity
The total number of Key Encryption Keys (KEK) that can be held simultaneously on a KFD, which is 32.
KFD Unique Menus
The two additional software navigation menus featured on the KFD that are absent on the CIFD: Duplicate and Reconcile.
CIFD/KFD Power States
The three discrete power modes of the CIFD and KFD devices: Off, Stand by, and Active.
Cold Start (CIFD/KFD Radios)
A complete system cold initialization that automatically invokes two internal processes: BIT (Built-In Test) and E-Purge.