knowt logo

Chapter 23: Chemical Reactions 

Section 1: Chemical Changes

  • Describing Chemical Reactions

    • Chemical Reaction: a change in which one or more substances are converted into new substances.

    • Reactants: The substances that react

    • Products: The new substances produced

    • When chemical reactions occur, new compounds form when bonds between atoms in the reactants break and new bonds form.

    • An atomic nucleus changes only when nuclear decay or a nuclear reaction, such as nuclear fission or fusion, occurs.

    • The energy released by a nuclear reaction is millions of times greater than the energy released by a chemical reaction.

    • Different parts of the atom are used in chemical and nuclear reactions.

  • Conservation of Mass

    • When Lavoisier demonstrated the law of conservation of mass, he set the field of chemistry on its modern path.

    • Lavoisier also pioneered early experimentation on the biological phenomena of respiration and metabolism that contributed early milestones in the study of biochemistry, medicine, and even sports medicine.'

    • Antoine Lavoisier’s work led him to the conclusion that language terminology would be critical to communicate novel scientific ideas.

    • One of the questions that motivated Lavoisier was the mystery of exactly what happened when substances changed form.

    • When he determined the mass of the liquid mercury and gas, their combined masses were exactly the same as the mass of the red powder he had started with.

    • Lavoisier also established that the gas produced by heating mercury(II) oxide, which we call oxygen, was a component of air. He did this by heating mercury metal with air and saw that a portion of the air combined to give red mercury(II) oxide.

  • Writing Equations

    • Many words are needed to state all the important information.

    • Chemical Equation: a way to describe a chemical reaction using chemical formulas and other symbols.

    • On the left side of the equation are the reactants. On the right side of the equation are the products.

  • Unit Managers

    • Knowing the number of units of reactants enables chemists to add the correct amounts of reactants to a reaction.

    • Also, these units, or coefficients, tell them exactly how much product will form.

Section 2: Chemical Equations

  • Balanced Equations

    • Mercury metal forms when mercury oxide is heated. Because mercury is poisonous, this reaction is never performed in a classroom laboratory.

    • The formulas in a chemical equation must accurately represent the compounds that react.

    • Balanced Chemical Equation: The balancing process involves changing coefficients in a reaction

    • Finding out which coefficients to use to balance an equation is often a trial-and-error process

Section 3: Classifying Chemical Reactions

  • Types of Reactions

    • If you have ever observed something burning, you have observed a combustion reaction.

    • Combustion Reaction: occurs when a substance reacts with oxygen to produce energy in the form of heat and light.

      • Combustion reactions also produce one or more products that contain the elements in the reactants.

      • Many combustion reactions also will fit into other categories of reactions.

    • Synthesis Reaction: two or more substances combine to form another substance.

      • The generalized formula for this reaction type is as follows: A + B → AB.

    • Decomposition Reaction: occurs when one substance breaks down, or decomposes, into two or more substances.

      • The general formula for this type of reaction can be expressed as follows: AB → A + B.

      • Most decomposition reactions require the use of heat, light, or electricity.

      • Water decomposes into hydrogen and oxygen when an electric current is passed through it. A small amount of sulfuric acid is added to increase conductivity.

    • Single-Displacement Reaction: When one element replaces another element in a compound

      • Single-displacement reactions are described by the general equation A + BC → AC + B.

      • Copper in a wire replaces silver in silver nitrate, forming a blue-tinted solution of copper(II) nitrate.

      • Sometimes single-displacement reactions can cause problems.

      • Solid barium sulfate is formed from the reaction of two solutions.

    • A metal can replace any metal below it on the list but not above it.

    • Double-Displacement Reaction: the positive ion of one compound replaces the positive ion of the other to form two new compounds.

      • A double-displacement reaction takes place if a precipitate, water, or a gas forms when two ionic compounds in solution are combined.

      • A precipitate is an insoluble compound that comes out of solution during this type of reaction.

      • The generalized formula for this type of reaction is as follows: AB + CD → AD + CB.

    • One characteristic that is common to many chemical reactions is the tendency of the substances to lose or gain electrons.

    • Chemists use the term oxidation to describe the loss of electrons and the term reduction to describe the gain of electrons.

    • The cause and effect of oxidation and reduction can be taken one step further by describing the substances after the electron transfer.

    • The substance that gains an electron or electrons obviously becomes more negative, so we say it is reduced.

Section 4: Reaction Rates and Energy

  • Chemical Reactions and Energy

    • When its usefulness is over, a building is sometimes demolished using dynamite. Dynamite charges must be placed carefully so that the building collapses inward, where it cannot harm people or property.

    • All chemical reactions release or absorb energy. This energy can take many forms, such as heat, light, sound, or electricity.

    • According to the law of conservation of energy, energy cannot be created or destroyed, but can only change form.

    • In compounds, chemical potential energy is stored in chemical bonds between atoms.

  • Activation Energy: The minimum amount of energy needed to start a reaction.

    • In order to form new bonds, atoms have to be close together.

    • If there is not enough energy, the reaction will not start.

    • Activation energy, which differs from reaction to reaction, is required for both exothermic and endothermic reactions.

  • Endergonic Reactions

    • Sometimes a chemical reaction requires more energy to break bonds than is released when new ones are formed. These reactions are called endergonic reactions.

    • The energy absorbed can be in the form of light, heat, or electricity.

    • Endothermic Reaction: When the energy needed is in the form of heat

      • It also can describe physical changes.

      • Some reactions are so endothermic that they can cause water to freeze.

      • As an endothermic reaction happens, such as the reaction of barium hydroxide and ammonium chloride, energy from the surrounding environment is absorbed, causing a cooling effect. Here, the reaction absorbs so much heat that a drop of water freezes and the beaker holding the reaction sticks to the wood.

    • With an endothermic reaction, the chemical reaction will not take place unless energy is added.

    • With an endothermic reaction, the reactants have a lower energy level than the products. The reactants must overcome the activation energy barrier in order to form new products.

  • Exergonic Reactions

    • Chemical reactions that release energy are called exergonic reactions

      • In these reactions, less energy is required to break the original bonds than is released when new bonds are formed.

      • Glow sticks contain three different chemicals—an ester and a dye in the outer section and hydrogen peroxide in a center glass tube. Bending the stick breaks the tube and mixes the three components. The energy released is in the form of visible light.

    • Exothermic Reaction: When the energy given off in a reaction is primarily in the form of heat

      • Exothermic reactions provide most of the power used in homes and industries.

      • The energy diagram for an exothermic reaction is the reverse of an endothermic reaction. With an exothermic reaction, the products have less stored energy than the reactants.

      • In an exothermic reaction, molecules have enough energy to overcome the activation energy barrier. Energy is released with the formation of new products.

  • Chemical Reaction Rates

    • According to the kinetic theory of matter, atoms and molecules are always moving.

    • Rate of Reaction: the speed at which reactants are consumed and products are produced in a given reaction.

    • Reaction rate is important in the manufacturing industry because the faster the product can be made, the less it usually costs.

    • Energy is needed by atoms and molecules to break old bonds and to form new ones.

      • One way to increase the activation energy is to add heat or increase the temperature.

      • A chemical reaction will go faster at higher temperature and slower at lower temperature

    • The closer atoms and molecules are to each other, the greater the chance of collision. The amount of substance present in a certain volume is called its concentration.

      • Increasing the concentration of a substance increases the reaction rate.

    • Only atoms or molecules in the outer layer of a substance can collide with other reactants.

      • When a substance is finely divided, it has a larger surface area than when it was whole

      • Increasing the surface area increases the chance for collisions, which will increase the reaction rate.

    • Agitation or stirring is a physical process that allows reactants to mix.

      • A low stirring rate will slow the reaction due to fewer collisions.

      • Chemical reactions can be controlled by agitation.

    • Another way to influence the reaction rate is with pressure

      • By increasing the pressure of gases, molecules have less room to move about and the concentration of the reactants increases.

    • Catalyst: substance that speeds up a chemical reaction without being permanently changed itself.

      • When you add a catalyst to a reaction, the mass of the product that is formed remains the same, but it will form more rapidly.

      • A catalyst lowers the activation energy of the reaction.

    • Inhibitors: Substances that are used to slow down a chemical reaction

      • One thing to remember when thinking about catalysts and inhibitors is that they do not change the amount of product produced.

      • They only change the rate of production. Catalysts increase the rate and inhibitors decease the rate.

Chapter 23: Chemical Reactions 

Section 1: Chemical Changes

  • Describing Chemical Reactions

    • Chemical Reaction: a change in which one or more substances are converted into new substances.

    • Reactants: The substances that react

    • Products: The new substances produced

    • When chemical reactions occur, new compounds form when bonds between atoms in the reactants break and new bonds form.

    • An atomic nucleus changes only when nuclear decay or a nuclear reaction, such as nuclear fission or fusion, occurs.

    • The energy released by a nuclear reaction is millions of times greater than the energy released by a chemical reaction.

    • Different parts of the atom are used in chemical and nuclear reactions.

  • Conservation of Mass

    • When Lavoisier demonstrated the law of conservation of mass, he set the field of chemistry on its modern path.

    • Lavoisier also pioneered early experimentation on the biological phenomena of respiration and metabolism that contributed early milestones in the study of biochemistry, medicine, and even sports medicine.'

    • Antoine Lavoisier’s work led him to the conclusion that language terminology would be critical to communicate novel scientific ideas.

    • One of the questions that motivated Lavoisier was the mystery of exactly what happened when substances changed form.

    • When he determined the mass of the liquid mercury and gas, their combined masses were exactly the same as the mass of the red powder he had started with.

    • Lavoisier also established that the gas produced by heating mercury(II) oxide, which we call oxygen, was a component of air. He did this by heating mercury metal with air and saw that a portion of the air combined to give red mercury(II) oxide.

  • Writing Equations

    • Many words are needed to state all the important information.

    • Chemical Equation: a way to describe a chemical reaction using chemical formulas and other symbols.

    • On the left side of the equation are the reactants. On the right side of the equation are the products.

  • Unit Managers

    • Knowing the number of units of reactants enables chemists to add the correct amounts of reactants to a reaction.

    • Also, these units, or coefficients, tell them exactly how much product will form.

Section 2: Chemical Equations

  • Balanced Equations

    • Mercury metal forms when mercury oxide is heated. Because mercury is poisonous, this reaction is never performed in a classroom laboratory.

    • The formulas in a chemical equation must accurately represent the compounds that react.

    • Balanced Chemical Equation: The balancing process involves changing coefficients in a reaction

    • Finding out which coefficients to use to balance an equation is often a trial-and-error process

Section 3: Classifying Chemical Reactions

  • Types of Reactions

    • If you have ever observed something burning, you have observed a combustion reaction.

    • Combustion Reaction: occurs when a substance reacts with oxygen to produce energy in the form of heat and light.

      • Combustion reactions also produce one or more products that contain the elements in the reactants.

      • Many combustion reactions also will fit into other categories of reactions.

    • Synthesis Reaction: two or more substances combine to form another substance.

      • The generalized formula for this reaction type is as follows: A + B → AB.

    • Decomposition Reaction: occurs when one substance breaks down, or decomposes, into two or more substances.

      • The general formula for this type of reaction can be expressed as follows: AB → A + B.

      • Most decomposition reactions require the use of heat, light, or electricity.

      • Water decomposes into hydrogen and oxygen when an electric current is passed through it. A small amount of sulfuric acid is added to increase conductivity.

    • Single-Displacement Reaction: When one element replaces another element in a compound

      • Single-displacement reactions are described by the general equation A + BC → AC + B.

      • Copper in a wire replaces silver in silver nitrate, forming a blue-tinted solution of copper(II) nitrate.

      • Sometimes single-displacement reactions can cause problems.

      • Solid barium sulfate is formed from the reaction of two solutions.

    • A metal can replace any metal below it on the list but not above it.

    • Double-Displacement Reaction: the positive ion of one compound replaces the positive ion of the other to form two new compounds.

      • A double-displacement reaction takes place if a precipitate, water, or a gas forms when two ionic compounds in solution are combined.

      • A precipitate is an insoluble compound that comes out of solution during this type of reaction.

      • The generalized formula for this type of reaction is as follows: AB + CD → AD + CB.

    • One characteristic that is common to many chemical reactions is the tendency of the substances to lose or gain electrons.

    • Chemists use the term oxidation to describe the loss of electrons and the term reduction to describe the gain of electrons.

    • The cause and effect of oxidation and reduction can be taken one step further by describing the substances after the electron transfer.

    • The substance that gains an electron or electrons obviously becomes more negative, so we say it is reduced.

Section 4: Reaction Rates and Energy

  • Chemical Reactions and Energy

    • When its usefulness is over, a building is sometimes demolished using dynamite. Dynamite charges must be placed carefully so that the building collapses inward, where it cannot harm people or property.

    • All chemical reactions release or absorb energy. This energy can take many forms, such as heat, light, sound, or electricity.

    • According to the law of conservation of energy, energy cannot be created or destroyed, but can only change form.

    • In compounds, chemical potential energy is stored in chemical bonds between atoms.

  • Activation Energy: The minimum amount of energy needed to start a reaction.

    • In order to form new bonds, atoms have to be close together.

    • If there is not enough energy, the reaction will not start.

    • Activation energy, which differs from reaction to reaction, is required for both exothermic and endothermic reactions.

  • Endergonic Reactions

    • Sometimes a chemical reaction requires more energy to break bonds than is released when new ones are formed. These reactions are called endergonic reactions.

    • The energy absorbed can be in the form of light, heat, or electricity.

    • Endothermic Reaction: When the energy needed is in the form of heat

      • It also can describe physical changes.

      • Some reactions are so endothermic that they can cause water to freeze.

      • As an endothermic reaction happens, such as the reaction of barium hydroxide and ammonium chloride, energy from the surrounding environment is absorbed, causing a cooling effect. Here, the reaction absorbs so much heat that a drop of water freezes and the beaker holding the reaction sticks to the wood.

    • With an endothermic reaction, the chemical reaction will not take place unless energy is added.

    • With an endothermic reaction, the reactants have a lower energy level than the products. The reactants must overcome the activation energy barrier in order to form new products.

  • Exergonic Reactions

    • Chemical reactions that release energy are called exergonic reactions

      • In these reactions, less energy is required to break the original bonds than is released when new bonds are formed.

      • Glow sticks contain three different chemicals—an ester and a dye in the outer section and hydrogen peroxide in a center glass tube. Bending the stick breaks the tube and mixes the three components. The energy released is in the form of visible light.

    • Exothermic Reaction: When the energy given off in a reaction is primarily in the form of heat

      • Exothermic reactions provide most of the power used in homes and industries.

      • The energy diagram for an exothermic reaction is the reverse of an endothermic reaction. With an exothermic reaction, the products have less stored energy than the reactants.

      • In an exothermic reaction, molecules have enough energy to overcome the activation energy barrier. Energy is released with the formation of new products.

  • Chemical Reaction Rates

    • According to the kinetic theory of matter, atoms and molecules are always moving.

    • Rate of Reaction: the speed at which reactants are consumed and products are produced in a given reaction.

    • Reaction rate is important in the manufacturing industry because the faster the product can be made, the less it usually costs.

    • Energy is needed by atoms and molecules to break old bonds and to form new ones.

      • One way to increase the activation energy is to add heat or increase the temperature.

      • A chemical reaction will go faster at higher temperature and slower at lower temperature

    • The closer atoms and molecules are to each other, the greater the chance of collision. The amount of substance present in a certain volume is called its concentration.

      • Increasing the concentration of a substance increases the reaction rate.

    • Only atoms or molecules in the outer layer of a substance can collide with other reactants.

      • When a substance is finely divided, it has a larger surface area than when it was whole

      • Increasing the surface area increases the chance for collisions, which will increase the reaction rate.

    • Agitation or stirring is a physical process that allows reactants to mix.

      • A low stirring rate will slow the reaction due to fewer collisions.

      • Chemical reactions can be controlled by agitation.

    • Another way to influence the reaction rate is with pressure

      • By increasing the pressure of gases, molecules have less room to move about and the concentration of the reactants increases.

    • Catalyst: substance that speeds up a chemical reaction without being permanently changed itself.

      • When you add a catalyst to a reaction, the mass of the product that is formed remains the same, but it will form more rapidly.

      • A catalyst lowers the activation energy of the reaction.

    • Inhibitors: Substances that are used to slow down a chemical reaction

      • One thing to remember when thinking about catalysts and inhibitors is that they do not change the amount of product produced.

      • They only change the rate of production. Catalysts increase the rate and inhibitors decease the rate.

robot