Lab 7

Objectives of Secondary Bacterial Characterization Assays

  • Secondary characterization assays profile bacterial populations using biochemical approaches to define their specific growth and metabolic characteristics.

  • These assays build upon primary identification methods such as Gram staining (determining Gram-positive versus Gram-negative status and cell morphology) and primary enzymatic tests.

  • The three primary secondary assays used for bacterial classification are:

    • Indole Test

    • Triple Sugar Iron (TSI) Test

    • Analytical Profile Index (API) Test

Indole Test Protocol and Biochemical Interpretation

  • Biochemical Mechanism: The indole test determines a bacterial species' ability to synthesize enzymes that convert or break down the amino acid tryptophan into indole.

  • Physiological Significance of Indole:

    • Indole acts as a signal molecule regulating core bacterial physiological processes, including spore formation, plasmid stability, and drug resistance.

    • Bacteria capable of cleaving tryptophan into indole often demonstrate increased resistance to drugs/medications and higher survival rates in harsh environmental conditions via endospore formation.

  • Assay Card Protocol:

    • The test uses an assay card divided into four distinct test quadrants.

    • Using a sterile loop, pick an isolated bacterial colony.

    • Smear the colony onto one quadrant (strictly one bacterial sample per quadrant).

    • Discard the contaminated sterile loop into a biohazardous waste container.

    • Observe for color development within approximately 20 seconds20\,\text{seconds}.

    • Assay Card Interpretation:

      • Yellowish color: Indole negative (tryptophan is not cleaved).

      • Red, pink, or pinkish-orange color: Indole positive (tryptophan is successfully broken down into indole).

      • Note: Color shades may vary across red, pink, and orange tones, but any such hue indicates a positive result, whereas a yellow hue indicates a negative result.

  • Liquid Culture Protocol:

    • Inoculate the bacterial sample into a liquid growth broth specifically enriched with tryptophan or peptone.

    • Incubate the culture overnight.

    • Verify bacterial growth visually: media transitions from clear and transparent to cloudy/turbid.

    • Dispense 4–5 drops4\text{--}5\,\text{drops} of COVAX reagent slowly into the incubated broth culture using a pipette.

    • Gently swirl the tube to mix the reagent with the culture.

    • Liquid Broth Interpretation:

      • Bright pink band at the top surface: Strong indole positive result (robust indole production).

      • Slight pink/subtle pink band at the top surface: Weak indole positive result (tryptophan broken down less efficiently).

      • Yellow broth with no color change: Indole negative result (bacterial species lacks the enzymes required for tryptophan breakdown).

  • Indole Assay Results for Specific Bacteria:

    • Escherichia coli (Gram-negative): Indole positive (forms a distinct bright pink ring at the top layer).

    • Pseudomonas (Gram-negative): Indole negative (broth remains yellow).

    • Salmonella (Gram-negative): Indole negative (broth remains yellow).

Triple Sugar Iron (TSI) Test Protocol and Biochemical Interpretation

  • Purpose: The TSI assay evaluates a bacterium's ability to ferment specific carbohydrates (glucose, lactose, and sucrose) and/or produce hydrogen sulfide (H2S\text{H}_2\text{S}) gas.

  • Media Composition: Uses solid agar tubes poured at an angle to create a solid agar bottom (butt) and a graduated slant surface. The medium contains carbohydrates and a pH indicator (natively red in color when uninoculated).

  • Target Organisms: TSI is primarily used to differentiate enteric Gram-negative bacteria originating from the gut/intestinal tract, such as Salmonella, Shigella, and Escherichia coli.

  • Inoculation and Incubation Procedure:

    • Obtain bacterial sample from liquid culture using a sterile loop.

    • Inoculate by stabbing the loop straight down into the bottom agar butt.

    • As the loop is withdrawn, lightly streak it along the surface gradient of the slant.

    • Discard the loop into a biohazardous waste bin.

    • Incubate the slant tubes at 37 ∘C37\,^\circ\text{C} overnight.

  • Biochemical Interpretations and Visual Observations:

    • Uninoculated Control: Entire tube remains solid red (native pH indicator state).

    • Carbohydrate Fermentation: Fermentation of sugars produces organic acids, dropping the media pH and turning the pH indicator from red to yellow.

      • Solid Yellow Butt and Slant: Indicates fermentation of all three sugars (glucose, lactose, and sucrose).

      • Pink/Red Slant with Yellow-Orange Butt: Indicates fermentation of glucose only.

    • Gas Production (Non-H2S\text{H}_2\text{S}): Indicated by physical gaps, empty spaces, or lifting/separation of the solid agar from the bottom of the tube due to gas expansion.

    • Hydrogen Sulfide (H2S\text{H}_2\text{S}) Gas Production: Reacts within the agar to form a distinct dark black precipitate.

  • TSI Test Results for Specific Bacteria:

    • Escherichia coli (Gram-negative): Completely yellow throughout the butt and slant (ferments glucose, lactose, and sucrose) with agar displacement/cracking at the bottom (produces gas), but no black precipitate (negative for H2S\text{H}_2\text{S} gas).

    • Salmonella (Gram-negative): Yellow bottom with a dark black slant/butt precipitate (ferments sugars and produces H2S\text{H}_2\text{S} gas).

Analytical Profile Index (API) Test Protocol and Species Identification

  • Definition: The API test is a broad, multi-panel rapid screening strip consisting of 2020 individual micro-capsules/wells, allowing 2020 simultaneous biochemical tests on a single bacterial culture.

  • Micro-capsule Abbreviations and Diagnostic Targets:

    • ONPG: β\beta-galactosidase activity (Colorless=Negative\text{Colorless} = \text{Negative}, Yellow=Positive\text{Yellow} = \text{Positive}).

    • ADH: Arginine dihydrolase (Yellow=Negative\text{Yellow} = \text{Negative}, Red=Positive\text{Red} = \text{Positive}).

    • LDC: Lysine decarboxylase (Yellow/Orange=Negative\text{Yellow/Orange} = \text{Negative}, Robust Red=Positive\text{Robust Red} = \text{Positive}).

    • ODC: Ornithine decarboxylase (Bright Red=Positive\text{Bright Red} = \text{Positive}).

    • CIT: Citrate utilization (Pale Green=Negative\text{Pale Green} = \text{Negative}, Dark Blue-Green=Positive\text{Dark Blue-Green} = \text{Positive}).

    • H2S: Hydrogen sulfide gas production.

    • URE: Urease enzyme production.

    • TDA: Tryptophan deaminase (Yellow=Negative\text{Yellow} = \text{Negative}).

    • IND: Indole production (tryptophan breakdown).

    • VP: Voges-Proskauer test.

    • GEL: Gelatinase activity.

    • GLU: Glucose fermentation.

    • SOR: Sorbitol fermentation (equivalent to Sorbitol MacConkey / SMAX agar tests).

  • Inoculation and Incubation Procedure:

    • Place the API test strip inside its holding tray/trough.

    • Using a pipettor and sterile tips, fill each micro-capsule well through the top hole with liquid bacterial culture.

    • Specific Well Filling Guidelines:

      • Fill the CIT, VP, and GEL wells completely to the top.

      • Fill the anaerobic test wells (ADH, LDC, ODC, H2S, and URE) almost to the top, then layer with several drops of mineral oil to create an oxygen-free anaerobic environment.

    • Dispense 5 mL5\,\text{mL} of distilled water into the bottom of the tray/trough to maintain humidity.

    • Lower the API strip into the tray, place the lid on top, and incubate overnight at 37 ∘C37\,^\circ\text{C}.

  • Data Analysis and API Index Calculation:

    • Following overnight incubation, evaluate each well's color against the manufacturer's positive/negative reference chart.

    • Record each test result as positive (++) or negative (−-) in the lab notebook.

    • Numerical Scoring System:

      • The 2020 micro-capsules are evaluated in sequential groups of three (triplets).

      • Assign point values to positive tests within each triplet:

        • First test positive = 1 point1\,\text{point}

        • Second test positive = 2 points2\,\text{points}

        • Third test positive = 4 points4\,\text{points}

        • Any negative test = 0 points0\,\text{points}

      • Add the point values within each triplet to generate a single-digit score (ranging from 00 to 77).

      • Combine these scores sequentially to form a 7-digit API Index Number (e.g., 1140221).

    • Species Identification: Cross-reference or submit the 7-digit API Index Number against the manufacturer's database/codebook key to determine the exact bacterial species.