DC Circuit Vocabulary
Fundamental Electrical Concepts
Electric Current:
- Definition: Electric current is the rate of flow of free electrons through a conductor.
- SI Unit: Ampere ().
- Visual representation of charge flow in a conductor:

Electric Potential and Potential Difference:
- Electric Potential: The amount of work done per unit charge in bringing a charge from infinity to a specific point in an electrostatic field against electrostatic forces.
- Alternative Term: Voltage.
- SI Unit: Volt ().
- Property: Scalar quantity.
- Formula:
- Potential Difference: The amount of work required to move a unit charge between two specific locations within an electric field.
Electric Power:
- Definition: The rate at which electrical work is done or energy is transformed.
- SI Unit: Watt (), equivalent to one Joule per second ().
- Mathematical Formula:
Ohm's Law:
- Statement: The ratio of potential difference () across any two points of a conductor to the current () flowing through it is constant, provided the temperature of the conductor remains unchanged.
- Mathematical Formulation:
- Standard Form:
Passive Circuit Elements
Resistance:
- Definition: The opposition offered by a substance or material to the flow of electric current.
- Physical Mechanism: When a potential difference is applied across a conductor, free electrons accelerate and collide with the fixed atoms and molecules of the conductor material. These collisions restrict the rate of flow of electrons, thereby resisting current flow.
- SI Unit: Ohm ().
- Symbolic Notation: or
- Schematic Symbol:

- Factors Affecting Resistance:
- Length of Conductor (): Resistance is directly proportional to conductor length ().
- Cross-Sectional Area (): Resistance is inversely proportional to cross-sectional area ().
- Temperature: Resistance generally increases as temperature rises and decreases as temperature falls.
- General Mathematical Expression: (where represents the resistivity of the material)
Inductance:
- Definition: A property of an electrical component or coil that stores energy in a magnetic field and opposes any rapid or time-dependent change in current magnitude or direction passing through it.
- Physical Mechanism: Current flowing through a coil generates a surrounding magnetic field. Any variation in current magnitude alters the magnetic flux, inducing an electromotive force (emf) across the coil.
- Mathematical Formula: (where is voltage, is inductance, is current, and is time)
- SI Unit: Henry (), named in honor of American scientist Joseph Henry for discovering electromagnetic induction.
- Inductor Symbol:

Capacitance:
- Definition: A two-terminal circuit property that enables charge storage, thereby storing electrical energy in the form of an electric field/voltage.
- Mathematical Formula: (where is capacitance in Farads, is charge in Coulombs, and is potential difference in Volts)
- Current-Voltage Relation:
- Capacitor Symbol:

Classification of Electrical Sources
Hierarchical Taxonomy of Sources:

- Sources are divided into Voltage Sources and Current Sources.
- Voltage Sources are sub-divided into Ideal Voltage Sources and Practical Voltage Sources.
- Current Sources are sub-divided into Ideal Current Sources and Practical Current Sources.
Voltage Sources:
- Definition: A passive model element capable of supplying continuous electromotive force to drive free electrons through a connected circuit path; typically configured as a two-terminal device.
- Independent Voltage Source:
- Delivers a constant or time-varying voltage that is completely independent of currents or voltages present elsewhere in the circuit.
- Direct Voltage Source (Time Invariant Voltage Source): Produces a steady, time-invariant output voltage where polarity and electron flow direction remain constant over time. Examples include DC generators, chemical batteries, and cells.
- Alternating Voltage Source: Delivers voltage that periodically alternates magnitude and direction over time.
- Dependent Voltage Source:
- Produces an output voltage whose magnitude is controlled by another voltage or current existing at a different location within the circuit network.
- Subtypes: Voltage-Controlled Voltage Source (VCVS) and Current-Controlled Voltage Source (CCVS).
Network Terminology: Nodes, Branches, and Loops
- Branch: Represents a single two-terminal circuit element within a network, such as a individual resistor, current source, or voltage source.
- Node: A connection terminal or point where two or more circuit branches intersect.
- Loop:
- Definition: Any closed continuous conductive path formed by starting at a specific node, passing through a series of connected nodes, and returning to the original starting node without traversing any single node more than once.
- Independent Loop: A closed loop that encompasses at least one branch that is not shared with any other existing independent loop. Independent loops generate linearly independent network equations.
- Loop Set Example: In a multi-node circuit containing branches connected between nodes , , and , an independent loop set can consist of loop containing a resistor, a second loop containing a resistor and current source, and a third loop containing parallel resistive branches.
Resistors in Series and Parallel
Resistors Connected in Series:
- Circuit Characteristics: End-to-end connection of resistors such that a single common current flows sequentially through every component.
- Total Equivalent Resistance:
- Series Circuit Example:

- Parameters: Resistors , , in series with a current source.
- Voltage across :
- Voltage across :
- Voltage across :
- Total Applied Voltage:
Resistors Connected in Parallel:
- Circuit Characteristics: Components connected across common node pairs such that the full supply voltage is impressed across every individual branch.
- Equivalent Resistance Formula:
- Parallel Circuit Calculation Example:
- Given Parallel Network: , ,
- Reciprocal Sum Calculation:
- Equivalent Resistance:
Kirchhoff's Laws
Kirchhoff's Current Law (KCL):
- Statement: The total electric charge or current entering a node/junction is precisely equal to the charge leaving that node, as charge cannot accumulate or be consumed within a junction.
- Algebraic Expression:
- Sign Convention: Currents directed into a node are designated as positive (+\), while currents directed away from a node are designated as negative (-\).
- Nodal Equation:

- For three entering currents () and two leaving currents ():
- Primary Application: Analyzing parallel circuits and setting up nodal equations.
Kirchhoff's Voltage Law (KVL):
- Statement: In any closed loop electrical network, the algebraic sum of all potential differences (voltage drops and electromotive forces) around the loop equals zero.
- Algebraic Expression:
- Loop Direction Rule: Traversal around a closed circuit loop must maintain a single direction (either clockwise or counter-clockwise) continuously across nodes :

- Primary Application: Analyzing series circuits and establishing loop/mesh equations.
Comprehensive KVL & KCL Numerical Demonstration:
- Circuit Parameters: Two DC sources (, ) supplying three resistors (, , ) connected across nodes and .
- KCL Nodal Equations:
- Node :
- Node :
- KVL Loop Equations:
- Loop 1:
- Loop 2:
- Loop 3 (Outer Loop):
Star-Delta and Delta-Star Transformations
Star to Delta () Transformation:
- Transformation Principle: Any individual resistance value in a Delta () network () is equal to the sum of all pair-wise products of Star () network resistors () divided by the Star resistor located directly opposite to the target Delta resistor.
- Transformation Schematic:

- Transformation Formulas:
- Resistor (opposite to Star resistor ):
- Resistor (opposite to Star resistor ):
- Resistor (opposite to Star resistor ):
- Worked Star to Delta Conversion Example:
- Given Star Network Values: , ,
- Calculating Delta Resistor :
- Calculating Delta Resistor :
- Calculating Delta Resistor :
Delta to Star () Transformation:
- Transformation Principle: Each Star resistor connected to a terminal terminal is equal to the product of the two adjacent Delta resistors intersecting at that terminal, divided by the sum of all three Delta network resistors ().
- Transformation Schematic:

- Transformation Formulas:
- Star Resistor (terminal 1):
- Star Resistor (terminal 2):
- Star Resistor (terminal 3):
- Algebraic Derivation Summary:
- Worked Delta to Star Conversion Example:
- Given Delta Network Values: , ,
- Denominator Sum:
- Calculating Star Resistor :
- Calculating Star Resistor :
- Calculating Star Resistor :
Thevenin's Theorem
Theorem Statement:
- Any linear active electrical network containing independent or dependent voltage and current sources together with linear passive elements can be replaced across any two specified output terminals by a simplified equivalent circuit consisting of a single voltage source () connected in series with an internal equivalent resistance ().
- (Thevenin Voltage): The open-circuit voltage measured or calculated across the open load terminals.
- (Thevenin Resistance): The equivalent input resistance looking into the open load terminals with all independent energy sources deactivated.
Thevenin Equivalent Circuit Structure:

Systematic Analysis Steps:
- Disconnect and remove the load resistor from the target circuit terminals .
- Calculate the open-circuit terminal voltage , which equals .
- Deactivate all independent sources in the circuit network: replace ideal voltage sources with short circuits and ideal current sources with open circuits. Calculate the equivalent internal resistance viewed from open terminals A-B$.\n 4. Construct the Thevenin equivalent circuit by connecting V_{TH}R_{TH}R_L.\n 5. Calculate the load response using Ohm's Law:\n I_L = \frac{V_{TH}}{R_{TH} + R_L}\n V_L = I_L \times R_L\n\n* Complete Numerical Step-by-Step Problem Solution:\n * Problem Circuit: A 48\,\text{V}R_1 = 12\,\text{k}\OmegaR_2 = 4\,\text{k}\OmegaR_3 = 8\,\text{k}\OmegaR_L = 5\,\text{k}\OmegaA-B$.
- Step 1 (Disconnect Load): Remove from terminals and B$.\n * Step 2 (Determine V_{TH}):\n * With terminals A-BR_3 = 8\,\text{k}\Omega\n * Total loop resistance for the energized path: 12\,\text{k}\Omega + 4\,\text{k}\Omega = 16\,\text{k}\Omega\n * Loop current: I = \frac{48\,\text{V}}{16\,\text{k}\Omega} = 3\,\text{mA}\n * Voltage drop across 4\,\text{k}\OmegaV_{4k} = 3\,\text{mA} \times 4\,\text{k}\Omega = 12\,\text{V}\n * Since 8\,\text{k}\Omega12\,\text{V}A-B:\n V_{TH} = V_{AB} = 12\,\text{V}\n * Step 3 (Determine R_{TH}):\n * Short-circuit the 48\,\text{V} DC voltage source.\n * Looking back through terminals A-B8\,\text{k}\Omega12\,\text{k}\Omega4\,\text{k}\Omega\n * Parallel combination calculation:\n R_{\text{parallel}} = \frac{12\,\text{k}\Omega \times 4\,\text{k}\Omega}{12\,\text{k}\Omega + 4\,\text{k}\Omega} = \frac{48}{16} = 3\,\text{k}\Omega\n * Total Thevenin resistance:\n R_{TH} = 8\,\text{k}\Omega + 3\,\text{k}\Omega = 11\,\text{k}\Omega\n * Step 4 (Calculate Load Response):\n * Connect V_{TH} = 12\,\text{V}R_{TH} = 11\,\text{k}\OmegaR_L = 5\,\text{k}\Omega\n * Load current:\n I_L = \frac{12\,\text{V}}{11\,\text{k}\Omega + 5\,\text{k}\Omega} = \frac{12\,\text{V}}{16\,\text{k}\Omega} = 0.75\,\text{mA}\n * Load voltage:\n V_L = I_L \times R_L = 0.75\,\text{mA} \times 5\,\text{k}\Omega = 3.75\,\text{V}\n\n# Norton's Theorem\n\n* Theorem Statement:\n * Any linear active electrical network consisting of independent or dependent voltage and current sources together with linear passive elements can be substituted across its output terminals by an equivalent circuit containing a constant current source (I_NI_{SC}R_NR_{int}).\n * Dual Relationship: Norton's theorem is the converse/dual representation of Thevenin's theorem.\n * I_{SC} (Short-Circuit Current): The current flowing through the load terminals when shorted together.\n * R_NR_{TH}.\n\n* Norton Equivalent Circuit Structure:\n \n\n* Systematic Analysis Steps:\n 1. Remove the load resistor R_LA-B and replace it with a short circuit.\n 2. Calculate short-circuit current I_{SC}A-BI_N.\n 3. Deactivate all independent sources (short voltage sources, open current sources) and evaluate Norton equivalent resistance R_N = R_{int}A-B$.
- Reconstruct the equivalent circuit by connecting , , and in parallel.
- Calculate load current using the Current Divider Rule (CDR):
Complete Numerical Step-by-Step Problem Solution:
- Problem Circuit: A DC source supplying a network of resistors (, , ) connected to load resistor across terminals A-B$.\n * Step 1 & 2 (Calculate Short-Circuit Current I_N):\n * Short terminals ABR_3 = 3\,\OmegaR_2 = 6\,\Omega\n * Parallel equivalent resistance:\n R_{p} = \frac{3\,\Omega \times 6\,\Omega}{3\,\Omega + 6\,\Omega} = \frac{18}{9} = 2\,\Omega\n * Total resistance seen by 12\,\text{V} source:\n R_T = 2\,\Omega + R_{p} = 2\,\Omega + 2\,\Omega = 4\,\Omega\n * Total circuit current supplied by source:\n I_T = \frac{V}{R_T} = \frac{12\,\text{V}}{4\,\Omega} = 3\,\text{A}\n * Apply Current Divider Rule (CDR) to determine current through shorted branch A-B:\n I_N = I_{SC} = I_T \times \frac{6\,\Omega}{3\,\Omega + 6\,\Omega} = 3\,\text{A} \times \frac{6}{9} = 2\,\text{A}\n * Step 3 (Calculate Norton Resistance R_N):\n * Deactivate the 12\,\text{V} source by replacing it with a short circuit.\n * Remove the short across terminals A-BA-B\n * The 3\,\Omega6\,\Omega2\Omega\n * Parallel combination calculation:\n R_{\text{parallel}} = \frac{6\,\Omega \times 2\,\Omega}{6\,\Omega + 2\,\Omega} = \frac{12}{8} = 1.5\,\Omega\n * Total Norton internal resistance:\n R_N = 3\,\Omega + 1.5\,\Omega = 4.5\,\Omega\n * Step 4 (Calculate Load Parameters):\n * Connect I_N = 2\,\text{A}R_N = 4.5\,\OmegaR_L = 1.5\,\Omega in parallel\n * Apply Current Divider Rule to find load current I_L:\n I_L = I_N \times \frac{R_N}{R_N + R_L} = 2\,\text{A} \times \frac{4.5\,\Omega}{4.5\,\Omega + 1.5\,\Omega} = 2\,\text{A} \times \frac{4.5}{6.0} = 1.5\,\text{A}\n * Calculate load voltage V_LR_L:\n V_L = I_L \times R_L = 1.5\,\text{A} \times 1.5\,\Omega = 2.25\,\text{V}$$