Geometrical Transformations: Enlargement and Reduction
Fundamentals of Geometric Dilations
- Dilation Overview: A dilation is a transformation that produces an image that is the same shape as the original, but is a different size. This is a non-rigid transformation, meaning it does not preserve distance, unlike reflections, rotations, and translations.
- Pre-image and Image: In any transformation, the original figure is designated as the pre-image and the resulting figure after the transformation is known as the image.
- Similarity: Because dilations preserve the shape and angle measures of a figure, the pre-image and the image are always similar figures. This means that their corresponding angles are congruent and their corresponding side lengths are proportional.
- Criteria for Dilation: Every dilation is defined by two primary components:
* Center of Dilation: A fixed point in the plane about which all points are expanded or contracted.
* Scale Factor (k): The ratio of the lengths of the corresponding sides of the image and the pre-image.
Detailed Analysis of Enlargement
- Definition: An enlargement is a specific type of dilation where the size of the resulting image is greater than the size of the original pre-image.
- Mathematical Condition: For a dilation to be classified as an enlargement, the absolute value of the scale factor (k) must be greater than 1.
* Formally: ∣k∣>1
- Spatial Relationship: During an enlargement, the points of the image move further away from the center of dilation than the corresponding points of the pre-image.
- Geometric Effects:
* All linear dimensions (length, width, perimeter) of the original figure are multiplied by the scale factor k.
* The orientation of the figure remains the same if k is positive.
Detailed Analysis of Reduction
- Definition: A reduction (often referred to in geometry as a contraction or compression) is a type of dilation where the size of the resulting image is smaller than the size of the original pre-image.
- Mathematical Condition: For a dilation to be classified as a reduction, the absolute value of the scale factor (k) must be between 0 and 1.
* Formally: 0<∣k∣<1
- Spatial Relationship: During a reduction, the points of the image move closer to the center of dilation than the corresponding points of the pre-image.
- Applications: Reductions are common in real-world applications such as architecture (blueprints), cartography (map making), and engineering (scale models).
The Scale Factor (k)
- Definition: The scale factor determines the degree to which a figure is enlarged or reduced. It is calculated as the ratio of an image length to its corresponding pre-image length.
- Formula: k=Pre-image LengthImage Length
- Distance Ratio: The scale factor is also the ratio of the distance from the center of dilation to an image point compared to the distance from the center of dilation to the corresponding pre-image point.
* k=CPCP′, where C is the center of dilation, P is a point on the pre-image, and P′ is the corresponding point on the image.
- Directionality (Positive vs. Negative k):
* Positive k: The image and pre-image lie on the same side of the center of dilation.
* Negative k: The image is inverted and lies on the opposite side of the center of dilation. A dilation with a negative scale factor includes a rotation of 180∘ about the center of dilation.
Impact of Dilations on Geometric Properties
- Angle Preservation: Dilations are conformal transformations, meaning that the measures of the angles in the pre-image are exactly equal to the corresponding angles in the image.
- Parallelism and Collinearity: Dilations preserve the parallelism of lines and the collinearity of points. If three points are collinear in the pre-image, their image points will also be collinear.
- Area and Volume Changes:
* Area: If the linear scale factor is k, the area of the image changes by a factor of k2.
* Areaimage=k2×Areapre−image
* Volume: If the linear scale factor is k, the volume of a three-dimensional image changes by a factor of ∣k∣3.
* Volumeimage=∣k∣3×Volumepre−image
Coordinate Notation for Dilations
- Dilations centered at the Origin: When the center of dilation is the origin (0,0), the coordinate rule is straightforward. Every coordinate of the pre-image is multiplied by the scale factor k.
* Rule: (x,y)→(kx,ky)
- Dilations centered at an Arbitrary Point (a,b): If the center of dilation is not the origin but a point (a,b), the rule accounts for the offset.
* Rule: (x,y)→(a+k(x−a),b+k(y−b))