Comprehensive Study Guide to Dilations, Similar Polygons, and Triangle Similarity
Foundations of Dilations and Similarity Transformations
Geometric Transformations Overview:
A rigid motion is a transformation that maps an original figure (the preimage) onto a new figure (the image) while preserving distance, side lengths, and angle measures (isometry).
A nonrigid motion is a transformation that changes the dimensions, size, or shape of a given figure.
A dilation is a specific type of nonrigid motion that enlarges or reduces a geometric figure proportionally with respect to a fixed point called the center of dilation.
Under any dilation, the side lengths of the image are proportional to the corresponding side lengths of the preimage, while the corresponding angle measures remain congruent.
Scale Factor () Principles:
The scale factor of a dilation () is defined as the ratio of a length on the image to the corresponding length on the preimage:
Enlargement: Occurs when the absolute scale factor is strictly greater than one (), resulting in an image larger than the original figure.
Reduction: Occurs when the scale factor is strictly between zero and one (), resulting in an image smaller than the original figure.
If , the dilation produces an image that is congruent to the preimage ().
Multiple Representations of Scale Factor: Scale factors can be represented interchangeably as fractions, decimals, or percentages (for instance, a scale factor of is equivalent to or ).
Dilations on the Coordinate Plane:
Unless explicitly stated otherwise, the default center of dilation on the Cartesian coordinate plane is the origin .
Coordinate Rule: To dilate a figure by a scale factor of centered at the origin, multiply both the -coordinate and the -coordinate of every vertex by :
Example: For with vertices , , and dilated by a scale factor of centered at the origin:
Example: For with vertices , , and dilated by a scale factor of centered at the origin:
Example: For with vertices , , and dilated with a scale factor of centered at the origin, the image coordinates of vertex are:
Determining Scale Factor Using the Distance Formula:
When side lengths are not explicitly stated on a coordinate grid, find the lengths of corresponding segments using the Distance Formula:
Demonstration: Given with endpoints and , and dilated image with endpoints and : Because , the transformation is an enlargement by a scale factor of .
Properties Preserved and Modified Under Dilation:
Preserved Invariants: Dilations preserve angle measure, betweenness of points, collinearity of points, and parallelism of lines. Parallel lines map to parallel lines.
Modified Invariants: Dilations do not preserve distance (segment length) unless . Consequently, dilations alter perimeter and area.
Area Scaling: If a figure undergoes a dilation with scale factor , its perimeter scales by , and its two-dimensional area scales by the factor : To produce an image whose area is four times the area of the original figure, the required scale factor is .
Dilation of Lines:
Any line passing through the center of dilation maps directly onto itself. If is a real number, the line passes through the origin ; therefore, any dilation centered at the origin maps the line to itself.
Any line not passing through the center of dilation maps to a distinct parallel line having the exact same slope. Dilating the line by a scale factor of centered at the origin multiplies its -intercept by while retaining its slope of , yielding the equation:
Slope of Lines Connecting Points to Their Dilated Images:
For any point and its image dilated about the origin where and , the line containing and passes through the origin .
The slope of is:
The restriction that must not lie on the -axis () is critical because if , the line is vertical and the slope is undefined.
Invariant Points Across Transformations: An invariant point remains fixed under a transformation ().
Dilation with : Always maintains invariant points; every point in the plane is invariant.
Rotation of by about : Always maintains an invariant point; the center of rotation is fixed.
Reflection across the -axis: Sometimes maintains invariant points; only points lying directly on the reflection axis () remain fixed.
Translation along a non-zero vector \langle 7, 3 \rangle$:* Never maintains invariant points because all points shift by a non-zero magnitude.\n - *Dilation centered at the origin with k = 2$: Only the center of dilation is invariant; no other point is fixed.
Composition of Dilations:
If a figure is dilated by scale factor centered at the origin and subsequently dilated by scale factor centered at the origin, the composite transformation is a single dilation centered at the origin with an effective scale factor equal to the product:
Example: Enlarging figure by to produce , followed by dilating by to produce , is equivalent to mapping directly to via a single dilation centered at the origin with scale factor .
Similar Polygons and Proportional Relationships
Definitions and Fundamental Theorems:
A similarity transformation is a transformation composed of a dilation, or a dilation combined with one or more rigid motions (translations, reflections, rotations).
Similar Polygons: Two figures are similar polygons if and only if one can be obtained from the other by a similarity transformation.
Theorem 3.1 (Similar Polygons Theorem): Two polygons are similar if and only if all pairs of corresponding angles are congruent and all pairs of corresponding side lengths are proportional.
Similarity Ratio: The ratio of the lengths of any two corresponding sides in similar polygons is called the similarity ratio or scale factor.
Theorem 3.2 (Properties of Similarity): Similarity satisfies the criteria of an equivalence relation:
Reflexive Property of Similarity:
Symmetric Property of Similarity: If , then
Transitive Property of Similarity: If and , then
Setting Up Similarity Statements and Proportions:
Vertices in a similarity statement must be ordered to reflect corresponding parts.
If , then:
Congruent Angles: , , ,
Proportional Sides:
If , then:
Congruent Angles: , , ,
Proportional Sides:
Problem-Solving Tip (Redrawing Diagrams):
When working with overlapping or differently oriented similar figures, redraw each polygon separately in the same orientation to systematically compare corresponding parts and eliminate errors when formulating proportions.
Solving for Unknown Measures in Similar Polygons:
Example: Given with side lengths , , , and :
Theorem 3.3 (Perimeters of Similar Polygons Theorem):
If two polygons are similar, then their perimeters are proportional in the same ratio as the scale factor between them.
Paragraph Proof of Theorem 3.3:
Given: and .
To Prove: .
Proof: From the given proportion, the side lengths of can be expressed in terms of the side lengths of :
The perimeter of is the sum of its sides:
Substituting the perimeter of into the ratio:
Therefore, the ratio of the perimeters is equal to the similarity ratio .
Applications of Similar Polygons and Perimeters
Navigation and Route Modeling (The State Fair Problem):
Scenario: Geoffrey visits a fairgrounds map showing the concert hall (), Ferris wheel (), and sports center (). On the map, , , and . The actual ground distance between the concert hall and the sports center is .
Polygon Model: Geoffrey's path forms a triangle, , which is similar to the actual path traveled, .
Unit Conversion: Measurements must share identical units before calculating scale factor:
Scale Factor Calculation: Comparing actual length to map length :
Total Distance Calculation: Map perimeter of is:
Let represent the actual perimeter of :
Geoffrey travels a total distance of .
Role-Playing Video Game Map Navigation:
Scenario: A game map shows home to health food store as , health food store to dungeon as , and dungeon to home as . The actual in-game distance between the health food store and the dungeon is .
Map Perimeter: .
Proportion: Comparing dungeon-to-store legs:
Total Actual Distance: .
Lawn Care Perimeter and Ratio Analysis:
Scenario: Nayeli's rectangular lawn has a perimeter of . The ratio of lawn length to width is .
Calculation: Let length and width :
Nayeli's lawn has a width of .
Commercial Printing and Scaling Dimensions:
Wheelchair Tennis Banner: Jalal enlarges an original design measuring wide by long by a scale factor of .
As a percentage: .
Dimensions: Width ; Length .
Converted to feet: approximately .
Family Portrait Enlargement: Natalia enlarges an portrait by times.
As a percentage: .
Dimensions: Width ; Length .
Microscopic Scaling in Biology:
A paramecium is an actual length of .
To achieve an image length of ():
To achieve an image length of ():
Athletic Rink Similarity:
Olympic Rink Dimensions: .
Community College Rink Dimensions: .
Comparison of Corresponding Ratios:
Because all four angles are right angles () and the ratio of length-to-length equals the ratio of width-to-width (), the two rinks are similar.
Triangle Similarity Criteria: Angle-Angle (AA)
Postulate 3.1 (Angle-Angle (AA) Similarity Postulate):
If two angles of one triangle are congruent to two angles of another triangle, then the triangles are similar.
Theoretical Justification via the Third Angles Theorem: If two angles of one triangle are congruent to two angles of another, their third angles must also be congruent because the interior angles of a triangle always sum to . Thus, establishing two pairs of congruent angles guarantees that all corresponding angles are congruent.
Proving Triangles Similar via Parallel Lines:
When a transversal crosses parallel lines, alternate interior angles and corresponding angles are congruent.
Example: In a triangle with a line segment parallel to one base intersecting the two legs, the shared vertex angle is congruent to itself by the Reflexive Property of Congruence (), and the parallel lines create congruent corresponding angles (). Thus, by the AA Similarity Postulate.
Physical and Optical Modeling with AA Similarity:
The Law of Reflection in Handball:
Scenario: Demarco teaches Taye handball. Taye returns serves at a bounce height of . The ball hits the floor at the short line, located from the front wall. Taye stands behind the short line. The angle of incidence equals the angle of reflection.
Geometric Model: Two right triangles are formed: one between the front wall and bounce point, and one between the bounce point and Taye. Both triangles contain a angle with the level floor, and the bouncing paths form congruent angles with the floor. Therefore, the triangles are similar by AA.
Unit Conversion: Convert inches to feet:
Proportion for Wall Hit Height ():
Demarco must aim high on the front wall.
Shadow Reckoning (Indirect Measurement):
Cell Phone Tower Height: A cell tower casts a shadow at the same time Lia, who is tall (), casts a shadow long ().
The sun's rays strike the earth at identical angles at the same time, and both objects stand perpendicular to the ground, creating similar right triangles by AA.
Setting up the proportion for tower height :
The cell phone tower is tall.
Lighthouse and Coincident Shadows: Maya stands such that the tip of her shadow coincides exactly with the tip of a lighthouse shadow.
The lighthouse has a height of , Maya has a height of , and Maya's shadow length is .
Let represent the total distance from the lighthouse to the tip of the shadow:
The distance from Maya to the base of the lighthouse is :
Historical Development in Mathematics (Margherita Beloch):
Italian mathematician Margherita Beloch (1879–1976) made foundational contributions to photogrammetry, the science of extracting accurate geometric measurements and spatial coordinate positions from photographic images using scales and similarity principles.
She is also renowned for formalizing the geometric capabilities of paper folding (origami), authoring the work "On the Method of Paper Folding for the Resolution of Geometric Problems."
Triangle Similarity Criteria: SSS and SAS
Theorems and Formulations:
Theorem 3.4 (Side-Side-Side (SSS) Similarity Theorem): If the corresponding side lengths of two triangles are proportional, then the triangles are similar.
Theorem 3.5 (Side-Angle-Side (SAS) Similarity Theorem): If the lengths of two sides of one triangle are proportional to the lengths of two corresponding sides of another triangle and their included angles are congruent, then the triangles are similar.
Systematic Strategy for Testing SSS Similarity:
To test whether two triangles are similar by SSS, pair and compare the side lengths systematically by rank order:
Compare the longest side of the first triangle to the longest side of the second triangle.
Compare the intermediate side of the first triangle to the intermediate side of the second triangle.
Compare the shortest side of the first triangle to the shortest side of the second triangle.
Example: Triangle 1 has sides ; Triangle 2 has sides :
Longest sides:
Intermediate sides:
Shortest sides:
Because all three ratios equal , the triangles are similar by SSS Similarity.
Two-Column Proof of the SAS Similarity Theorem:
Given: , , , and .
To Prove: .
Proof Steps:
(Given).
and (Corresponding Angles Postulate).
(AA Similarity Postulate).
(Definition of Similar Polygons).
(Given).
(Substitution Property of Equality).
(Given).
, which implies (Transitive and Algebraic Properties).
(Given), and , so (Transitive Property).
by SAS Congruence (, , ).
Since , .
By the Transitive Property of Similarity, .
Algebraic and Architectural Applications:
Julia's A-Frame House Balcony:
Scenario: An A-frame house is tall with a base long. A balcony is constructed above the ground. The slant side of the house is long, and the balcony intersects the slant side from the bottom. The central height bisects the base and the balcony.
Model Dimensions: The vertical bisector divides the house into two symmetric right triangles.
Outer triangle: Height , base , hypotenuse (slant) .
Upper triangle (above balcony): Height , slant leg .
Similarity Check: Both share the apex angle (Reflexive Property). Check the ratio of the sides forming that angle: The triangles are similar by SAS Similarity.
Balcony Width Calculation: Let be the half-length of the balcony:
Total balcony length is doubled:
Radio Tower Height Problem:
A radio tower casts an shadow at the same time a vertical yardstick () casts a shadow of .
Conversion: Yardstick ratio .
Height Calculation: .
Mountain Peak Distance Estimation:
Marcus and Skye's houses are separated by an actual distance of . On their constructed scale diagram, the distance between their homes is .
Diagram Scale: .
Marcus to Peak: Diagram measures .
Skye to Peak: Diagram measures .
Comparative Analysis and Discussion
Comparison of Triangle Similarity Criteria:
AA Similarity Postulate: Requires demonstrating that two pairs of angles are congruent. Does not require knowledge of any side lengths.
SSS Similarity Theorem: Requires demonstrating that all three pairs of corresponding side lengths form equal ratios. Does not require knowledge of any angle measures.
SAS Similarity Theorem: Requires demonstrating that two pairs of side lengths form equal ratios and that the interior angles strictly between those sides (the included angles) are congruent.
SSA Non-Criterion: Side-Side-Angle (where the congruent angle is not between the two proportional sides) is insufficient to guarantee similarity because it can yield an ambiguous case with two completely different non-similar triangles.
Questions & Discussion:
If two polygons are congruent, are they also similar?
Yes. If two polygons are congruent (), all corresponding angles are congruent, and all corresponding side lengths are equal in a ratio. Because their corresponding sides are proportional with a scale factor of , all congruent polygons are inherently similar.
Will any two regular polygons with the same number of sides be similar?
Yes. For any regular polygon with sides, all interior angles are congruent with measure . Thus, two regular -gons always have congruent corresponding angles. Furthermore, all side lengths within a regular polygon are equal; therefore, the ratio of any side of the first polygon to any side of the second polygon is constant () across all corresponding sides. Both criteria of Theorem 3.1 are unconditionally met.
Are all rectangles similar? (Provide a Counterexample):
No, all rectangles are not similar. While all rectangles have four congruent interior angles (), their side lengths are not necessarily proportional.
Counterexample: Consider a rectangle and a rectangle. The angle criterion is satisfied, but the ratio of the widths is , whereas the ratio of the lengths is . Because , the side lengths are not proportional, and the rectangles are not similar.
Is similarity an equivalence relation?
Yes. An equivalence relation must satisfy the reflexive, symmetric, and transitive properties. Theorem 3.2 proves that similarity satisfies all three properties, formally qualifying geometric similarity as an equivalence relation.
What physical assumptions are made when creating geometric models for physical paths and shadows?
The ground is assumed to be a completely flat, horizontal plane.
Upright structures (such as walls, towers, yardsticks, lighthouses, people) stand perfectly vertical, forming exact right angles () with the ground.
Light rays from distant celestial sources (such as the Sun) travel along parallel lines to the Earth's surface.
Trajectories (such as bounced balls) travel along straight lines, and the rebound satisfies the ideal optical condition where the angle of approach equals the angle of departure without distortion or drag.