A Process of Design
# A Process of Design
The design process is a structured way of identifying a need, developing a suitable solution and checking that it works. It is iterative: testing or evaluation may show that an earlier decision needs to be changed.
## 1. What is design?
- Design is the process of planning and developing a solution to a need or problem.
- A successful design should:
- Meet the needs of its intended user.
- Work safely and effectively.
- Be practical to make and use.
- Take account of relevant constraints, such as cost, materials and time.
- Design involves both creative thinking and technical decision-making.
## 2. Identify the need and analyse the problem
- A need is a situation or problem that requires a solution.
- Before designing, establish:
- Who the user is.
- What the product must do.
- Where and how it will be used.
- Any safety, size, cost, material or manufacturing issues.
- Research helps the designer understand the problem and avoid making unsupported assumptions.
- Research may include:
- Primary research: information gathered directly, such as user interviews, questionnaires, observation or product testing.
- Secondary research: information gathered from existing sources, such as books, catalogues, websites or standards.
- Analyse existing products to identify useful features, limitations and possible improvements. Do not simply copy an existing design.
## 3. Write a design brief
- A design brief is a clear statement of the problem and the task to be completed.
- It should:
- Describe the need and intended user.
- State what the solution must achieve.
- Be clear and focused.
- Allow room for different possible solutions.
- A brief should not usually prescribe every detail of the solution; that is part of the design work.
## 4. Set a design specification
- A design specification is a list of requirements that the final design should meet.
- It turns the brief into points that can guide design decisions and later evaluation.
- Requirements may relate to:
- Function: what the product must do.
- User and ergonomics: comfort, ease of use and suitability for the user.
- Safety: avoiding hazards during use and manufacture.
- Size and appearance: dimensions, shape, colour or finish.
- Materials and manufacture: what can be used and how the product can be made.
- Cost and time: limits on budget and available time.
- Environment: durability, repair, reuse, recycling and waste.
- Requirements should be as specific and testable as possible. For example, “must fit on a desk” is less precise than giving a maximum footprint.
### Requirements and constraints
- A requirement describes something the design should achieve.
- A constraint is a limit that restricts the design, such as a fixed budget, limited material or deadline.
- A strong design meets the requirements while working within the constraints.
## 5. Generate possible ideas
- Idea generation means producing a range of possible solutions before choosing one to develop.
- Useful methods include:
- Freehand sketching.
- Brainstorming.
- Mind maps.
- Looking at how existing products solve similar problems.
- Consider different forms, mechanisms, materials and ways of using the product.
- Develop more than one idea so that there is a real choice.
- Record ideas clearly with sketches, notes and labels.
## 6. Select and develop an idea
- Compare ideas with the design specification.
- Choose the idea, or combination of ideas, that best meets the requirements and constraints.
- Development means improving and refining the selected idea.
- During development, consider:
- Shape, dimensions and proportions.
- How parts connect and move.
- Material choices and manufacturing methods.
- Strength, stability, safety and ease of use.
- Appearance and finish.
- Use annotated sketches to explain decisions and changes.
- A design may be revised several times as problems are identified.
## 7. Model, prototype and test
- A model can represent all or part of a design. It may be used to explore size, shape, appearance or operation.
- A prototype is a working or near-working version used to test the design.
- Testing can reveal problems that are difficult to spot in drawings alone.
- Tests should relate to the specification. For example, check whether the product:
- Performs its intended function.
- Is stable and safe.
- Is comfortable and straightforward to use.
- Fits within the required dimensions.
- Record test results and use them to make improvements.
- Modelling and testing are part of the iterative design process, not just a final check.
## 8. Communicate the final design
- The final design must be communicated clearly enough for another person to understand how it should be made and used.
- Communication may include:
- A finished sketch or presentation drawing.
- Suitable technical drawings with dimensions.
- Details of materials, components and finishes.
- Notes explaining operation, assembly or important features.
- A model or prototype where appropriate.
- Drawings and notes should be neat, accurate and consistent with the design specification.
## 9. Plan and make the solution
- The design must be practical to manufacture using the available tools, materials, equipment and time.
- Plan the sequence of operations and consider:
- Suitable materials and processes.
- Safe working methods.
- Accurate marking out and assembly.
- How the finished product will be checked.
- Making the product may reveal problems that require further changes to the design.
## 10. Evaluate the solution
- Evaluation is the process of judging how well the finished solution meets the design specification.
- Check the product against each requirement rather than relying only on personal opinion.
- Use evidence from tests, measurements and user feedback where possible.
- Identify:
- What works well.
- What does not fully meet the specification.
- Any safety, usability or manufacturing issues.
- Specific improvements that could be made.
- Evaluation can lead to further redesign and testing.
## Worked example: a desk organiser
1. Need: A student’s pens and small stationery items are scattered across a desk.
2. Brief: Design and make a desk organiser for a student.
3. Research: Ask the user what items need storing; measure typical items; examine existing organisers for useful and unsuitable features.
4. Specification: The organiser must hold the chosen items, fit within a stated desk area, remain stable, have no sharp edges and be made from available materials.
5. Generate ideas: Sketch several layouts, such as separate compartments, a sloping pen holder or a removable tray.
6. Select and develop: Choose the layout that best meets the specification; add dimensions and decide how the parts will be joined.
7. Model and test: Make a simple model to check that the items fit and that the organiser does not tip over. Adjust the dimensions if needed.
8. Make and evaluate: Manufacture the final version, then check it against every specification point and record possible improvements.
## Exam Tips
- Keep the design brief, specification and final solution clearly connected.
- Give a range of ideas before developing one; show changes with sketches and annotations.
- Make specifications specific enough to test.
- Evaluate against the specification and support comments with evidence.
- Remember that the design process is iterative, not always a straight sequence.