College Physics 2e: Chapter 2 Kinematics Study Notes

Fundamentals of One-Dimensional Position, Displacement, and Distance

  • Standard Coordinate Systems and Reference Frames
    • Position (xx) is defined as a distance coordinate along one or more axes relative to a designated origin using a specified scale.
    • Standard SI unit for position, distance, and displacement is the meter (mm).
    • Direction in one-dimensional kinematic systems is designated algebraically by sign:
    • Positive direction (++): typically assigned to motion pointing rightward or upward.
    • Negative direction (−-): typically assigned to motion pointing leftward or downward.
    • Directional arrows indicate the vector orientation along coordinate axes.

Professor pacing in front of a blackboard showing a positive displacement of 2.0 meters

  • Mathematical Definition of Displacement
    • Displacement is defined as the net change in position of an object from an initial location to a final location.
    • Formula for displacement:     Δx=xf−x0\Delta x = x_{\text{f}} - x_0     where:
    • Δx\Delta x represents displacement.
    • xfx_{\text{f}} represents the final position coordinate.
    • x0x_0 (pronounced "x-naught") represents the initial position coordinate at time t0t_0.
    • Δ\Delta (capital Greek letter delta) denotes the change in a variable.
    • Displacement is a vector quantity, possessing both magnitude and direction. The direction is expressed by the algebraic sign (++ or −-).
    • Example scenario of negative displacement: a passenger walking toward the back of an airplane from initial position x0=6.0 mx_0 = 6.0\,m to final position xf=2.0 mx_{\text{f}} = 2.0\,m relative to the plane:     Δx=xf−x0=2.0 m−6.0 m=−4.0 m\Delta x = x_{\text{f}} - x_0 = 2.0\,m - 6.0\,m = -4.0\,m     The negative sign indicates that the displacement vector points toward the rear of the aircraft.

Passenger moving toward the rear of an airplane resulting in a displacement of -4.0 meters

  • Sign Conventions and Vector Addition of Displacement
    • Standard sign orientation conventions for spatial coordinates:
    • Horizontal axis (xx): East / Right is positive (+x+x); West / Left is negative (−x-x).
    • Vertical axis (yy): North / Up is positive (+y+y); South / Down is negative (−y-y).

Coordinate axis sign conventions showing directional axes and displacement vectors

  • Total displacement over a trip composed of multiple sequential legs is calculated by the vector sum of each individual displacement segment, accounting strictly for directional signs:     Δxtot=Δxa+Δxb+Δxc+Δxd+…\Delta x_{\text{tot}} = \Delta x_{\text{a}} + \Delta x_{\text{b}} + \Delta x_{\text{c}} + \Delta x_{\text{d}} + \dots
  • The final algebraic sign of Δxtot\Delta x_{\text{tot}} defines the overall direction of the net displacement.

Multi-segment displacement vectors representing individual trip legs inside an airplane

  • Distinction Between Scalars and Vectors

    • Scalar Quantities:
    • Specified purely by a numerical value (magnitude) and an appropriate unit.
    • Do not possess any direction in space.
    • Examples: mass (kgkg), time (ss), temperature (∘C^\circ\text{C} or K\text{K}), distance (mm), speed (m/sm/s).
    • Assigning directions to scalar quantities is physical nonsense (e.g., stating "5 kg North5\,kg\text{ North}" is invalid).
    • Vector Quantities:
    • Specified by both a magnitude (with unit) and a directional orientation in space.
    • Examples: displacement (mm), velocity (m/sm/s), acceleration (m/s2m/s^2), force (NN).
    • Vector example: traveling 5 km East5\,km\text{ East}.
  • Distance vs. Displacement Comparison

    • Distance is a scalar quantity defined as the total length of the path traveled during a motion, regardless of direction. Distance is always non-negative (≥0\ge 0).
    • Displacement is a vector quantity defined solely by final position minus initial position (xf−x0x_{\text{f}} - x_0).
    • Worked Example (Round Trip to a Store):
    • A person travels from Home to a Store located 3 km3\,km away and then returns Home along the exact same path.
    • Total Distance Traveled:       Distance=3 km+3 km=6 km\text{Distance} = 3\,km + 3\,km = 6\,km
    • Net Displacement:       Δxtot=xf−x0=0 km−0 km=0 km\Delta x_{\text{tot}} = x_{\text{f}} - x_0 = 0\,km - 0\,km = 0\,km

Diagram of a 3 km round trip between home and store illustrating zero net displacement

Kinematic Variables: Time, Velocity, and Speed

  • Time and Elapsed Time

    • Time (tt) serves as a temporal coordinate specifying when an event occurs. Time is a scalar quantity.
    • Standard SI unit for time is seconds (ss).
    • Elapsed time (Δt\Delta t) is the time interval over which a motion takes place:     Δt=tf−t0\Delta t = t_{\text{f}} - t_0
    • When initial time t0t_0 is taken as zero (t0=0t_0 = 0), elapsed time simplifies to Δt=t\Delta t = t.
  • Average Velocity vs. Average Speed

    • Average Velocity (vˉ\bar{v}):
    • Vector quantity defined as total displacement divided by elapsed time:       vˉ=ΔxΔt=xf−x0tf−t0\bar{v} = \frac{\Delta x}{\Delta t} = \frac{x_{\text{f}} - x_0}{t_{\text{f}} - t_0}
    • Standard SI unit: meters per second (m/sm/s).
    • Direction: the algebraic sign of average velocity is identical to the sign of displacement Δx\Delta x.
    • Path Independence: average velocity depends only on endpoint positions (x0x_0 and xfx_{\text{f}}) and total elapsed time, ignoring intermediate path details.
    • Average Speed:
    • Scalar quantity defined as total distance traveled divided by elapsed time:       Average Speed=Total DistanceΔt\text{Average Speed} = \frac{\text{Total Distance}}{\Delta t}
    • Numerical Comparison for the 30-minute30\text{-minute} Round Trip to Store:
    • Total distance = 6 km6\,km; total displacement = 0 km0\,km; elapsed time Δt=30 min=0.5 h\Delta t = 30\,min = 0.5\,h
    • Average Speed:       Average Speed=6 km0.5 h=12 km/h\text{Average Speed} = \frac{6\,km}{0.5\,h} = 12\,km/h
    • Average Velocity:       vˉ=0 km0.5 h=0 km/h\bar{v} = \frac{0\,km}{0.5\,h} = 0\,km/h
  • Instantaneous Velocity and Speed

    • Instantaneous Velocity (vv): the velocity of an object at a specific single instant in time.
    • Formally determined as the limit of average velocity as elapsed time approaches zero (lim⁡Δt→0ΔxΔt\lim_{\Delta t \rightarrow 0} \frac{\Delta x}{\Delta t}).
    • Equals the slope of the line tangent to the position-versus-time graph at that exact moment.
    • Instantaneous Speed: scalar magnitude of instantaneous velocity (∣v∣|v|).
  • Graphical Motion Representations of the Store Trip

    • Position vs. Time (xx vs tt):
    • Outbound leg (00 to 0.25 h0.25\,h): linear position increase from 0 km0\,km to 6 km6\,km.
    • Return leg (0.250.25 to 0.50 h0.50\,h): linear position decrease from 6 km6\,km back to 0 km0\,km.
    • Velocity vs. Time (vv vs tt):
    • Outbound leg: positive velocity (+24 km/h+24\,km/h or +12 km/h+12\,km/h depending on leg duration).
    • Return leg: negative velocity (negative sign reflects direction change toward starting point).
    • Speed vs. Time:
    • Constant positive magnitude throughout motion, reflecting scalar nature.

Graphs of Position vs Time, Velocity vs Time, and Speed vs Time for a round trip journey

Acceleration Concepts and Directional Sign Conventions

  • Definition and Formulas of Acceleration

    • Average Acceleration (aˉ\bar{a}):
    • Vector quantity defined as change in instantaneous velocity divided by elapsed time:       aˉ=ΔvΔt=vf−v0tf−t0\bar{a} = \frac{\Delta v}{\Delta t} = \frac{v_{\text{f}} - v_0}{t_{\text{f}} - t_0}
    • Standard SI unit: meters per second per second (m/s2m/s^2 or m s−2m\,s^{-2}).
    • Instantaneous Acceleration (aa): acceleration at a specific instant in time, equal to the slope of the line tangent to the velocity-versus-time graph at that moment.
  • Relationships Between Velocity and Acceleration Signs

    • Speeding Up (Increasing Speed Magnitude):
    • Occurs when velocity (vv) and acceleration (aa) have the SAME algebraic sign.
    • Both positive (v>0,a>0v > 0, a > 0): moving right/up and speeding up.
    • Both negative (v<0,a<0v < 0, a < 0): moving left/down and speeding up.
    • Slowing Down / Deceleration (Decreasing Speed Magnitude):
    • Occurs when velocity (vv) and acceleration (aa) have OPPOSITE algebraic signs.
    • Positive velocity, negative acceleration (v>0,a<0v > 0, a < 0): moving right/up and slowing down.
    • Negative velocity, positive acceleration (v<0,a>0v < 0, a > 0): moving left/down and slowing down.
    • Crucial Distinction Regarding Deceleration:
    • Deceleration means the object is slowing down (acceleration is directed opposite to motion).
    • Deceleration does NOT strictly mean negative acceleration! An object moving left (v<0v < 0) that slows down has a POSITIVE acceleration (a>0a > 0).
  • Four Vehicle Motion Scenarios (Figure 2.14 Analysis)

    • Scenario (a):
    • Car moves right (v>0v > 0) and speeds up.
    • Acceleration vector points right (+x+x).
    • Acceleration sign: positive (a>0a > 0).
    • Scenario (b):
    • Car moves right (v>0v > 0) and slows down.
    • Acceleration vector points left (−x-x).
    • Acceleration sign: negative (a<0a < 0); car is decelerating.
    • Scenario (c):
    • Car moves left (v<0v < 0) and slows down.
    • Acceleration vector points right (+x+x).
    • Acceleration sign: positive (a>0a > 0); car is decelerating.
    • Scenario (d):
    • Car moves left (v<0v < 0) and speeds up.
    • Acceleration vector points left (−x-x).
    • Acceleration sign: negative (a<0a < 0); car is speeding up.

Four automobile motion scenarios illustrating combinations of velocity and acceleration directional signs

The Five Kinematic Equations for Constant Acceleration

  • The Five Core Kinematic Variables

    • Initial Velocity: v0v_0
    • Final Velocity: vfv_{\text{f}} (or simply vv)
    • Displacement: Δx\Delta x
    • Acceleration: aa
    • Elapsed Time: Δt\Delta t (or simply tt)
  • Formulation of the Five Equations

    • Each equation links exactly four variables, omitting one variable entirely:
    • Kinematic Equation 1 (Omits final velocity vfv_{\text{f}}):     Δx=v0t+12at2\Delta x = v_0 t + \frac{1}{2} a t^2
    • Kinematic Equation 2 (Omits initial velocity v0v_0):     Δx=vt−12at2\Delta x = v t - \frac{1}{2} a t^2
    • Kinematic Equation 3 (Omits acceleration aa):     Δx=12(v0+v)t\Delta x = \frac{1}{2}(v_0 + v) t
    • Kinematic Equation 4 (Omits displacement Δx\Delta x):     v=v0+atv = v_0 + a t
    • Kinematic Equation 5 (Omits elapsed time tt):     v2=v02+2aΔxv^2 = v_0^2 + 2 a \Delta x
  • The Five Equations Problem-Solving Methodology

    • Step 1: Write down all given variables with correct numerical values, signs, and SI units.
    • Step 2: Identify the target unknown variable to solve for.
    • Step 3: Determine which of the five variables is neither given nor required (the "missing variable").
    • Step 4: Select the corresponding kinematic equation that omits that missing variable.
    • Step 5: Substitute values into the chosen equation and solve for the target unknown.
    • Multi-Stage Motion Strategy: If acceleration changes during motion (e.g., constant velocity reaction time phase followed by decelerating braking phase), break the journey into distinct sequential stages. The final velocity of stage 1 becomes the initial velocity of stage 2 (v1f=v20v_{1\text{f}} = v_{20}).

Worked Problem Examples Using Kinematics

  • Problem 1: Jet Car Deceleration (Slide 18)
    • Given values: Initial velocity v0=70.0 m/sv_0 = 70.0\,m/s, constant acceleration a=−1.50 m/s2a = -1.50\,m/s^2, time t=40.0 st = 40.0\,s
    • Target unknown: Final velocity vfv_{\text{f}}
    • Missing variable: Displacement Δx\Delta x
    • Equation selection: vf=v0+atv_{\text{f}} = v_0 + a t
    • Calculation:     vf=70.0 m/s+(−1.50 m/s2)(40.0 s)=70.0 m/s−60.0 m/s=10.0 m/sv_{\text{f}} = 70.0\,m/s + (-1.50\,m/s^2)(40.0\,s) = 70.0\,m/s - 60.0\,m/s = 10.0\,m/s

Vector diagram for decelerating car with initial velocity 70.0 m/s and negative acceleration

  • Problem 2: Dragster Distance from Rest (Slide 19)
    • Given values: Initial velocity v0=0 m/sv_0 = 0\,m/s (rest), acceleration a=26.0 m/s2a = 26.0\,m/s^2, time t=5.56 st = 5.56\,s
    • Target unknown: Distance / displacement Δx\Delta x
    • Missing variable: Final velocity vv
    • Equation selection: Δx=v0t+12at2\Delta x = v_0 t + \frac{1}{2} a t^2
    • Calculation:     Δx=(0)(5.56 s)+12(26.0 m/s2)(5.56 s)2=0.5×26.0×30.9136=401.8768 m≈402 m\Delta x = (0)(5.56\,s) + \frac{1}{2}(26.0\,m/s^2)(5.56\,s)^2 = 0.5 \times 26.0 \times 30.9136 = 401.8768\,m \approx 402\,m

Diagram showing accelerating dragster starting from initial position x0 to final position x

  • Problem 3: Dragster Final Velocity (Slide 20)
    • Given values: Initial velocity v0=0 m/sv_0 = 0\,m/s, acceleration a=26.0 m/s2a = 26.0\,m/s^2, time t=5.56 st = 5.56\,s
    • Target unknown: Final velocity vv
    • Missing variable: Displacement Δx\Delta x
    • Equation selection: v=v0+atv = v_0 + a t
    • Calculation:     v=0+(26.0 m/s2)(5.56 s)=144.56 m/s≈145 m/sv = 0 + (26.0\,m/s^2)(5.56\,s) = 144.56\,m/s \approx 145\,m/s

Diagram showing accelerating dragster computing final velocity v under acceleration 26.0 m/s^2

  • Problem 4: Braking Distance on Dry vs. Wet Surfaces (Slide 21)
    • Given values: Initial velocity v0=30.0 m/sv_0 = 30.0\,m/s, final velocity vf=0 m/sv_{\text{f}} = 0\,m/s
    • Dry surface deceleration: adry=−7.00 m/s2a_{\text{dry}} = -7.00\,m/s^2
    • Wet surface deceleration: awet=−5.00 m/s2a_{\text{wet}} = -5.00\,m/s^2
    • Target unknown: Stopping distance Δx\Delta x
    • Missing variable: Time tt
    • Equation selection: vf2=v02+2aΔx  ⟹  Δx=vf2−v022av_{\text{f}}^2 = v_0^2 + 2 a \Delta x \implies \Delta x = \frac{v_{\text{f}}^2 - v_0^2}{2 a}
    • Calculation for Dry Road:     Δxdry=02−(30.0 m/s)22(−7.00 m/s2)=−900−14.00≈64.3 m\Delta x_{\text{dry}} = \frac{0^2 - (30.0\,m/s)^2}{2(-7.00\,m/s^2)} = \frac{-900}{-14.00} \approx 64.3\,m
    • Calculation for Wet Road:     Δxwet=02−(30.0 m/s)22(−5.00 m/s2)=−900−10.00=90.0 m\Delta x_{\text{wet}} = \frac{0^2 - (30.0\,m/s)^2}{2(-5.00\,m/s^2)} = \frac{-900}{-10.00} = 90.0\,m

Diagram comparing vehicle stopping distance on dry and wet road conditions

  • Problem 5: Multi-Stage Stopping Distance with Reaction Time (Slide 22)
    • Driver reaction time: treact=0.50 st_{\text{react}} = 0.50\,s
    • Stage 1 (Reaction Phase): Motion at constant speed v0=30.0 m/sv_0 = 30.0\,m/s (a=0a = 0):     Δxreact=v0treact=(30.0 m/s)(0.50 s)=15.0 m\Delta x_{\text{react}} = v_0 t_{\text{react}} = (30.0\,m/s)(0.50\,s) = 15.0\,m
    • Stage 2 (Braking Phase): Initial velocity v20=30.0 m/sv_{20} = 30.0\,m/s, final velocity v2f=0 m/sv_{2\text{f}} = 0\,m/s
    • Total Stopping Distance on Dry Road:     Δxtot, dry=15.0 m+64.3 m=79.3 m\Delta x_{\text{tot, dry}} = 15.0\,m + 64.3\,m = 79.3\,m
    • Total Stopping Distance on Wet Road:     Δxtot, wet=15.0 m+90.0 m=105 m\Delta x_{\text{tot, wet}} = 15.0\,m + 90.0\,m = 105\,m

Multi-stage stopping distance diagram including reaction time phase and braking distances

  • Problem 6: Velocity Over Given Displacement (Slide 23)
    • Given values: Initial position x0=0x_0 = 0, displacement x=200 mx = 200\,m, initial velocity v0=10.0 m/sv_0 = 10.0\,m/s, acceleration a=2.00 m/s2a = 2.00\,m/s^2, elapsed time t=10.0 st = 10.0\,s
    • Target unknown: Final velocity vv
    • Calculation:     v=v0+at=10.0 m/s+(2.00 m/s2)(10.0 s)=10.0 m/s+20.0 m/s=30.0 m/sv = v_0 + a t = 10.0\,m/s + (2.00\,m/s^2)(10.0\,s) = 10.0\,m/s + 20.0\,m/s = 30.0\,m/s

Diagram of object accelerating over a displacement of 200 meters with initial velocity 10.0 m/s

Free-Fall Motion and Gravitational Kinematics

  • Fundamental Principles of Free-Fall
    • Free-fall occurs when an object moves vertically under the exclusive influence of gravity, with air resistance being completely negligible.
    • Acceleration Due to Gravity (gg):
    • On Earth's surface, the standard magnitude of acceleration due to gravity is g=9.8 m/s2g = 9.8\,m/s^2 (or 9.80 m/s29.80\,m/s^2).
    • gg varies slightly depending on geographic location and elevation.
    • On the Moon, acceleration due to gravity is approximately 1.67 m/s21.67\,m/s^2
    • Independence of Mass: In a vacuum, all objects fall with identical constant acceleration regardless of mass. Astronaut David R. Scott confirmed this on the Moon in 1971 by dropping a hammer and a feather simultaneously.

Hammer and feather falling in air versus vacuum and on the lunar surface

  • Coordinate System Rules for Free-Fall

    • Standard vertical coordinate axis is yy, with upward defined as positive (+y+y) and downward defined as negative (−y-y).
    • Acceleration Substitution in Kinematic Equations:     a=−g=−9.8 m/s2a = -g = -9.8\,m/s^2     This acceleration value (−9.8 m/s2-9.8\,m/s^2) remains fixed and constant at all times during vertical free-fall (ascent, peak, and descent).
    • Key Operational Free-Fall Rules:
    • Apex / Peak Height Condition: at maximum altitude, instantaneous vertical velocity is zero (v=0v = 0).
    • Dropped Objects: starting from rest implies initial velocity v0=0v_0 = 0
    • Trajectory Symmetry:
      • Time taken to ascend to peak equals time taken to descend back to starting height (tup=tdownt_{\text{up}} = t_{\text{down}}).
      • Speed at any given height during ascent equals speed at that exact same height during descent (∣vup∣=∣vdown∣|v_{\text{up}}| = |v_{\text{down}}|), with opposite velocity directions (vdown=−vupv_{\text{down}} = -v_{\text{up}}).
    • Ground Impact Speed: "hits the ground" refers to the instantaneous velocity at the exact moment immediately prior to contact.
  • Vertical Throw Analysis (Rock Example)

    • Upward Throw Scenario:
    • Rock thrown straight up with initial velocity v0=+13.0 m/sv_0 = +13.0\,m/s from origin y0=0y_0 = 0
    • Peak height (y1=8.10 my_1 = 8.10\,m) is reached when v=0v = 0
    • Calculation for time to peak:       v=v0+at  ⟹  0=13.0 m/s+(−9.8 m/s2)tpeak  ⟹  tpeak≈1.33 sv = v_0 + a t \implies 0 = 13.0\,m/s + (-9.8\,m/s^2)t_{\text{peak}} \implies t_{\text{peak}} \approx 1.33\,s
    • Downward Throw Comparison:
    • Rock thrown straight down from a cliff edge with initial velocity v0=−13.0 m/sv_0 = -13.0\,m/s vs. rock thrown straight up with v0=+13.0 m/sv_0 = +13.0\,m/s
    • When the upward-thrown rock falls back down past release height (y=0y = 0), its velocity is −13.0 m/s-13.0\,m/s
    • At any given displacement below release point (e.g., y=−5.10 my = -5.10\,m), both rocks achieve identical downward velocity (v=−16.4 m/sv = -16.4\,m/s

Vertical projectile trajectories comparing an upward throw and a downward throw off a cliff

Vector parameters for free-fall projectile with initial velocity +13.0 m/s and downward acceleration

  • Graphical Analysis of Free-Fall Motion
    • Position vs. Time (yy vs tt): downward opening parabola. Slope decreases from positive initial value, reaches zero at peak altitude (8.10 m8.10\,m), and becomes increasingly negative as object falls.
    • Velocity vs. Time (vv vs tt): straight line with constant negative slope equal to −g=−9.8 m/s2-g = -9.8\,m/s^2. Y-intercept is +13.0 m/s+13.0\,m/s, crossing zero at peak time (1.33 s1.33\,s) and proceeding into negative values.
    • Acceleration vs. Time (aa vs tt): flat horizontal line fixed at a=−9.8 m/s2a = -9.8\,m/s^2 throughout the entire motion.

Three-panel graph depicting Position, Velocity, and Acceleration versus Time for vertical free-fall

Graphical Analysis of Motion in Kinematics

  • Linear Equations and Graph Slopes
    • Standard Linear Equation:     y=mx+by = mx + b     where:
    • mm is the slope:       m=riserun=ΔyΔxm = \frac{\text{rise}}{\text{run}} = \frac{\Delta y}{\Delta x}
    • bb is the y-intercept (value of yy at x=0x = 0).

Standard linear graph illustrating y-intercept and slope calculation as rise over run

  • Position-Time Graphs (xx vs tt)
    • The slope of a position-versus-time graph represents velocity:     Slope=vˉ=ΔxΔt\text{Slope} = \bar{v} = \frac{\Delta x}{\Delta t}
    • Linear position-time graph indicates constant velocity (zero acceleration):     x=x0+vˉtx = x_0 + \bar{v} t

Displacement versus time graph for linear motion with constant slope representing average velocity

  • Curved position-time graph indicates changing velocity (acceleration present):
    • Secant line slope between two points equals average velocity vˉ\bar{v}.
    • Tangent line slope at a single point equals instantaneous velocity vv at that instant.

Displacement versus time curve showing tangent slopes at points P and Q corresponding to instantaneous velocity

  • Velocity-Time Graphs (vv vs tt)

    • The slope of a velocity-versus-time graph represents acceleration:     Slope=a=ΔvΔt\text{Slope} = a = \frac{\Delta v}{\Delta t}
    • Horizontal velocity line (slope=0\text{slope} = 0): indicates zero acceleration / constant velocity.
    • Sloped velocity line: indicates uniform acceleration.
    • Geometric area under a velocity-versus-time curve equals displacement (Δx\Delta x).
  • Acceleration-Time Graphs (aa vs tt)

    • Horizontal acceleration line: indicates constant acceleration.
    • Geometric area under an acceleration-versus-time curve equals change in velocity (Δv\Delta v).
  • Integrated Three-Graph Jet Car Analysis

    • Position vs. Time (xx vs tt): concave upward curve reflecting increasing slope (speeding up).
    • Velocity vs. Time (vv vs tt): straight line starting at v0=20 m/sv_0 = 20\,m/s and rising linearly to 160 m/s160\,m/s at t=30 st = 30\,s.
    • Slope calculation:       a=160 m/s−20 m/s30 s−0 s=5.0 m/s2a = \frac{160\,m/s - 20\,m/s}{30\,s - 0\,s} = 5.0\,m/s^2
    • Acceleration vs. Time (aa vs tt): flat horizontal line fixed at a=5.0 m/s2a = 5.0\,m/s^2.

Three-panel jet car motion graphs showing quadratic position, linear velocity, and constant acceleration

  • Graphical Derivative Relationships Across Motion Curve Derivatives
    • Constant velocity phase →\rightarrow linear sloped position line →\rightarrow flat velocity line →\rightarrow zero acceleration line.
    • Deceleration phase →\rightarrow downward bending position curve →\rightarrow negative sloped velocity line →\rightarrow flat negative acceleration line.

Velocity-time graph and corresponding piecewise constant acceleration-time graph

Curved position-time graph marked with sequential points for qualitative slope derivative analysis

Trapezoidal velocity-time profile showing acceleration, constant velocity, and deceleration phases