PA 2 Ultimate Study Guide
Fundamentals of Work
Definition of Work: Work is done when an applied force causes the displacement of an object. For a constant force, work done is defined as the product of the force applied and the displacement occurring in the direction of that force.
Governing Dependencies: Work depends strictly on three parameters:
- Force ()
- Displacement ()
- Direction of the applied force relative to displacement
Independence from Method of Execution: Work depends solely on force and displacement; it does not depend on the specific way or manner in which tasks are executed or done.
Mathematical Formulation for Constant Force:
- Work is expressed mathematically as:
- Symbolic formula:
SI Unit and Quantitative Equivalencies:
- The SI unit of work is the Joule ().
- Dimensional equivalence:
Graphical Interpretation of Work:
- On a Force-Displacement graph ( graph), the area bounded under the curve equals the total work done:
Descriptive Specifications:
- Whenever describing the work done in a physical system, it is mandatory to explicitly specify two entities:
- The specific force doing the work
- The specific object on which the work is being done
Vector versus Scalar Characteristics:
- Force and displacement are vector quantities possessing both magnitude and spatial direction.
- Work is a scalar quantity and has no physical direction in space.
- Work is fully described by a numerical magnitude accompanied by either a positive ( ) or negative ( ) sign.
Conditions for Zero, Positive, and Negative Work
Conditions under which Work Equals Zero ():
- Work done is zero if the applied force is zero ().
- Work done is zero if the resulting displacement is zero ().
- Work done is zero if the direction of the applied force is perpendicular to the displacement ().
Sign Conventions and Physical Effects of Work:
- Positive Work (): Occurs when the applied force and the displacement act in the same direction. Positive work results in an increase in speed (speeds up the object).
- Negative Work (): Occurs when the applied force acts in the opposite direction to the displacement. Negative work results in a decrease in speed (slows down the object).
Work-Energy Theorem and Units of Energy
Relationship Between Work and Energy:
- Work done on an object appears directly in the system as a change in its energy.
- The relation connecting the net work performed on an object to the corresponding alteration in its energy state is defined as the work-energy theorem.
Statement of the Work-Energy Theorem:
- The work done on an object is equal to the change in its energy:
Units and Attribution:
- The SI unit of energy is identical to the SI unit of work, which is the Joule ().
- The unit is named after the physicist James Prescott Joule.
Mechanical Energy and Kinetic Energy
Mechanical Energy Definition:
- Mechanical energy is the total energy that an object possesses due to its motion or its position.
Kinetic Energy Definition and Properties:
- Kinetic energy ( or ) is the energy possessed by an object due to its motion.
- Depends directly on two physical quantities: the mass () and the velocity () of the object.
- Kinetic energy is a scalar quantity.
- The SI unit of kinetic energy is the Joule ().
Formula for Kinetic Energy:
- Kinetic energy is calculated using the equation:
Step-by-Step Derivation of the Kinetic Energy Formula ():
- Begin with the primary equation for work done by a force causing displacement:
- Substitute Newton's Second Law of Motion () into the work equation:
- Relate acceleration () and displacement () to initial velocity () and final velocity () using the third kinematic equation of motion ():
- Substitute the expression for into the work formula:
- Expand the expression:
- For an object accelerated from rest, the initial velocity is zero ():
- Because the work done on the object from rest equals the kinetic energy imparted to it:
Potential Energy and Gravitational Potential Energy
Definition of Potential Energy ():
- Potential energy is the energy stored by an object as a result of its deformation, or stored within a system of objects due to their relative positions.
Elastic Deformation and Energy Storage:
- Potential energy is stored in an object whenever it undergoes physical deformation, such as when it is stretched or compressed.
- Real-world physical examples of stored potential energy include:
- A stretched bow stores potential energy ().
- A stretched slingshot stores potential energy ().
- A compressed spring stores potential energy ().
- When a deformed object is released, its stored potential energy converts directly into other forms of energy, such as kinetic energy.
Gravitational Potential Energy () in the Earth-Ball System:
- In an Earth-ball system, the mass of the Earth is so exceptionally large that it hardly moves; consequently, the potential energy of the system is attributed almost entirely to the ball.
- Gravitational potential energy depends on:
- The height of the ball above the ground ()
- The gravitational force acting on the ball ()
- Value of the acceleration due to gravity:
- Mathematical expression for gravitational potential energy:
Conservation of Mechanical Energy
Definition of Total Mechanical Energy:
- The total mechanical energy () of an object is defined as the sum of its potential energy () and kinetic energy ():
Principle of Conservation of Mechanical Energy:
- As an object moves solely under the influence of gravitational force, its mechanical energy remains constant.
- The mechanical energy of an object is conserved provided that no external forces (such as friction or drag) act upon it:
Power
Definition of Power:
- Power is defined as the rate at which work is done over time.
Mathematical Formula for Average Power:
- Average power () is calculated as work done () divided by time ():
SI Unit of Power:
- The SI unit of power is the Watt ().
Simple Machines
Foundational Function of Simple Machines:
- The total work required to accomplish a given task cannot be reduced by any machine.
- Simple machines make work easier by altering either the magnitude or the direction of the force that must be applied.
- Simple machines are defined as devices that facilitate tasks by changing the magnitude or direction of an applied force.
Core Operational Forces and Mechanical Advantage:
- Effort (): The force applied to the simple machine.
- Load (): The resistive force that needs to be overcome by the machine.
- Mechanical Advantage (): The ratio of load to effort:
Pulley:
- A pulley consists of a wheel equipped with an outer groove that guides a rope.
- A fixed pulley does not reduce the magnitude of the force required to move a load; its sole function is to change the direction of the applied force.
- In a fixed pulley system, the magnitude of the effort () equals the magnitude of the load ():
- Consequently, the mechanical advantage () of a fixed pulley is exactly one:
Inclined Plane:
- An inclined plane assists in lifting a heavy object to a higher elevation.
- It allows the user to exert less effort force compared to the effort required to lift the object vertically.
Lever:
- A lever is a rigid bar that is capable of rotating about a fixed point.
- The Three Main Parts of a Lever:
- Fulcrum: The fixed point about which the rigid bar rotates.
- Load: The force or resistance that needs to be overcome.
- Effort: The force applied to the rigid bar.
- Lever Arm Distances:
- Load Arm: The distance extending from the load to the fulcrum.
- Effort Arm: The distance extending from the effort to the fulcrum.