Chromatography I
Chromatography is established as a critical analytical technique, described as likely the most frequently used analytical method in chemistry. This means that many scientists and researchers rely on chromatography to analyze different substances and understand their composition.
Foundational Purpose: The core objective of chromatography is to take a mixture of compounds and separate them to achieve purification. This is important in many fields, such as pharmaceuticals, where it is necessary to isolate one substance from a mixture for further analysis.
General Mechanism: Separation is achieved by utilizing the differential binding preferences of compounds toward two different phases. Compounds partition between these phases based on their chemical preferences, meaning that some substances will stick to one phase while others will stick to another. This allows scientists to separate and identify different components in a mixture.
Fundamental Principles and Phases
Two-Phase System:
Stationary Phase: This phase remains fixed in place (stays put) and does not move. Understanding this helps us to know how substances interact with each other during separation.
Mobile Phase: This is a solvent or carrier that moves over or through the stationary phase. For example, in a liquid chromatography setup, the mobile phase may be a liquid solvent that carries the sample through the stationary phase.
The Dynamics of Separation:
In most chromatographic systems, if a compound prefers to stay in the mobile phase, it will traverse the system and elute (emerge) faster. Elution is essentially when the compound is washed out of the chromatography system and can be collected for analysis.
If a compound has a high affinity for the stationary phase, it will stick to it during its passage, causing it to elute slower. This principle is fundamental to understanding how different substances can be separated based on their properties.
The Partition Coefficient Concept:
The principle is analogous to the Octanol to Water Partition Coefficient ()
Test Tube Analogy: Imagine a test tube with an upper oily phase and a lower water phase. If a solute is added and mixed, it will partition based on its preference. This analogy helps visualize how compounds prefer certain environments over others.
Equal Partitioning: The solute distributes equally between both phases.
Preferential Partitioning: In a specific example provided, nine molecules of solute partition into the upper oil phase while only one stays in the bottom water phase. This demonstrates how substances interact differently with various solvents.
Application to Chromatography: If the water phase were the stationary phase and the oil phase were passing across it as the mobile phase, a compound with a high preference for the oil phase would move quickly through the instrument or column rather than staying behind. This is how separation occurs in chromatography.
Mechanisms of Solute Binding and Interaction
While the test tube example uses two liquids, chromatography typically utilizes a solid stationary phase and a liquid mobile phase. This is an important distinction and reveals how chromatography can be versatile in its applications.
There are five primary ways an analyte (solute) interacts with the stationary phase:
Adsorption: The solute binds directly to the exterior surface of a solid bead or particle. This is usually the simplest form of interaction and is commonly used in many types of chromatography.
Partition Chromatography: An inert bead is coated with a thin layer of liquid (such as a highly viscous oil). The solute partitions into this liquid layer, mirroring the oil/water test tube concept.
Ion Exchange Chromatography: The stationary phase consists of an inert bead with charged molecules or chains attached. For Example, positively charged chains will attract and bind negatively charged analytes. If the analyte sticks to the bead, it is temporarily immobilized in the stationary phase.
Size Exclusion Chromatography (SEC): Uses inert beads that are not solid but contain small, intricate channels or pores. Smaller analytes fit into the pores, get "stuck" or slowed down as they navigate the internal volume, while large analytes cannot fit and move past the beads more quickly
Electrophoresis: Separates analytes based on their affinity for an electrical charge. This technique is often used in DNA and protein analysis.
Charge Influence: The greater the difference in charge between the molecule and the electrical field, the stronger the attraction, and the faster the movement (e.g., a particle with charge moves faster than one with charge).
Size Influence: For particles with the same charge, the electrical field imparts the same force, but this force causes the smaller particle to move faster than the larger one.
Column Chromatography and Experimental Setup
Standard Setup: Analytical chemistry often uses "column chromatography," which is a common method in labs to analyze mixtures.
Physical Orientation:
Traditional: Vertical glass tubes arranged to be gravity-fed. This old method is still found in many laboratories because it's simple and effective.
Modern: Most new instruments use horizontal columns, though the operating principle remains identical.
Procedure:
A glass tube is filled with a solid powder (the stationary phase). The choice of stationary phase material can greatly affect the efficiency of the separation.
The tube is filled with a liquid (the mobile phase) to wet the powder and fill gaps. Proper wetting ensures optimal flow and separation.
A mixture of compounds is introduced at the top of the column.
Gravity (in simple setups) pulls the liquid and mixture through the stationary phase. The components of the mixture will start to separate as they move through the column.
Elution and Collection:
Compounds separate into distinct purified bands
Example: A black compound with no affinity for the stationary phase flows freely with the liquid and drips out first. A gray compound that sticks more to the stationary phase may only be halfway through the column when the black compound is collected.
Successive collection allows for the recovery of . This means that scientists can gather the separated substances for further tests or experiments.
Efficiency and Resolution in Analysis
Efficiency: Defined as the ability of a column to separate one compound from another, high efficiency is desired for the best separation. This means having clear and distinct separations between components in a mixture makes analysis easier and more accurate.
Thin Layer Chromatography (TLC) Representation:
Setup: A glass plate coated with a thin layer of powder (stationary phase). The mixture is spotted at the "origin."
Process: The plate is placed in a low level of solvent, which moves up the plate via capillary action.
High vs. Low Efficiency:
High efficiency results in two clear, distinct dots.
Low efficiency results in "fuzzy" dots with no clear line separating where one starts and the other ends.
Instrumental Representation (Chromatogram):
A nonspecific detector measures what comes out of the end of the column over time. This data is crucial for quantifying results from the chromatography process.
When a compound elutes, it creates a peak on the readout. When it finishes, the signal returns to the baseline. Peaks represent the presence of different compounds in the sample.
Baseline Separation: In high-efficiency systems, the signal returns to the baseline between two peaks. This indicates clear separation between compounds.
Overlapping Peaks: In low-efficiency systems, peaks run together, making it difficult to quantify how much of each component is present. This can lead to errors in analysis.
Calculating Resolution ():
Resolution is the quantitative measure of the ability to differentiate two peaks. Understanding resolution is crucial for interpreting chromatograms accurately.
Key Variables:
(Distance): The distance between the centers of two peaks (e.g., peak 1 at , peak 2 at , peak 3 at ). Greater distance results in higher resolution ( is in the numerator of the resolution fraction).
(Width): The width of the peaks. Narrower peaks make it easier to tell them apart. Wider peaks add together in the denominator, reducing resolution.
Optimization Strategies:
Resolution can be improved by either moving the peaks further apart or making them narrower (skinnier). This involves optimizing the chromatographic conditions to achieve better separation.
Preference: Making peaks narrower is preferred over moving them further apart because "time is money." Increasing the time between peaks lengthens the total run time for every sample, which can lead to inefficiencies in a laboratory setting.
Polarity and Molecular Interactions
Separation is usually determined by the interaction of three polarities: the analyte, the stationary phase, and the mobile phase
Reverse Phase Chromatography (Most Common):
Stationary Phase: Nonpolar.
Mobile Phase: Polar.
Historical Note: It is called "reverse" because the original method (Normal Phase) used a polar stationary phase and a nonpolar mobile phase
Types of Polar Interactions:
Induced Attraction (London Dipole Forces)
Permanent Dipoles (Polar Compounds): Compounds with a positive end and a negative end interact with charges/polar groups on the stationary phase. This interaction enhances separation.
Hydrogen Bonding: Usually, the stationary phase has no hydrogen bond donors or acceptors. However, because the mobile phase often contains water, hydrogen bonding can occur between the analyte and the mobile phase.
Charged Molecules: Actual ionic charges (not just partial charges) are the basis for ion exchange/exclusion chromatography, which is crucial for separating charged species.
Specific Chromatographic Techniques and Media
Gel Permeation Chromatography: A form of size exclusion chromatography (SEC) that separates based on molecular size.
Large molecules stay in the solvent flowing between beads and exit first.
Small molecules enter the pores, bounce around, and exit last. This technique is particularly useful in analyzing the sizes of polymers and other large biomolecules.
Adsorbents for Small Molecules:
Commonly used materials include Silica and Alumina.
Organic chemistry labs often use Alumina; instrumental analysis usually uses Silica.
Functionalization of Stationary Phases:
Silicon-based adsorbents can be modified by changing the functional groups attached to the silicon. This allows chemists to fine-tune the separation properties of the stationary phase.
Common nonpolar chains include and (carbon-hydrogen chains). The longer the chain, the more nonpolar the stationary phase becomes, influencing how different substances interact with the phase.
The River Metaphor:
A leaf floating on a river represents an analyte that does not stick to the stationary phase; it moves at the exact speed of the current (mobile phase)
A stick bouncing along the bottom of the river represents an analyte that occasionally interacts with/sticks to the bottom (stationary phase), causing it to move slower than the water current (delayed in elution)