Comprehensive Study Notes on P-Block Elements

General Electronic Configuration and Inert Pair Effect

Main group p-block elements are defined as elements in which the last incoming valence electron enters the outermost p-subshell. The p-block spans Groups 13 through 18 of the periodic table.

General Valence Electronic Configuration

The general valence electronic configuration for p-block elements is: \nns^2 np^{1-6}\n

Group-wise valence electronic configurations are as follows:

  • Group 13 (Boron Family): ns2np1ns^2 np^1

  • Group 14 (Carbon Family): ns2np2ns^2 np^2

  • Group 15 (Nitrogen Family): ns2np3ns^2 np^3

  • Group 16 (Oxygen Family): ns2np4ns^2 np^4

  • Group 17 (Halogen Family): ns2np5ns^2 np^5

  • Group 18 (Noble Gases): ns2np6ns^2 np^6 (Exception: Helium has a valence electronic configuration of 1s21s^2).

Period-wise structural breakdown of inner electrons:

  • Second Period: 2s22p1−62s^2 2p^{1-6}

  • Third Period: 3s23p1−63s^2 3p^{1-6}

  • Fourth Period: 3d104s24p1−63d^{10} 4s^2 4p^{1-6} (Involvement of inner 3d3d electrons)

  • Fifth Period: 4d105s25p1−64d^{10} 5s^2 5p^{1-6} (Involvement of inner 4d4d electrons)

  • Sixth Period: 4f145d106s26p1−64f^{14} 5d^{10} 6s^2 6p^{1-6} (Involvement of inner 4f4f and 5d5d electrons)

  • Seventh Period: 5f146d107s27p1−65f^{14} 6d^{10} 7s^2 7p^{1-6} (Involvement of inner 5f5f and 6d6d electrons)

Inert Pair Effect

The inert pair effect refers to the reluctance or inability of the valence ns2ns^2 electron pair to participate in chemical bonding in heavier members of p-block elements (especially elements belonging to the 6th period).

Mechanism and Origin
  1. Screening/Shielding Order of Orbitals: The shielding efficacy of inner electrons decreases in the order: \ns > p > d > f\n

  2. Inner dd and ff subshells exert a poor shielding effect on the valence electrons.

  3. Moving down a group to heavier members (e.g., 6th period elements like TlTl, PbPb, BiBi), the intervening 4f4f and 5d5d orbitals fail to screen the outermost ns2ns^2 electrons effectively from the nuclear attraction.

  4. Consequently, the effective nuclear charge (ZeffZ_{\text{eff}}) experienced by the outermost ns2ns^2 electrons increases significantly, pulling them closer to the nucleus and rendering them chemically inert.

Consequences on Oxidation States
  1. Moving down a group in the p-block, the stability of the lower oxidation state increases, whereas the stability of the higher group oxidation state decreases.

  2. Lower oxidation state = Group oxidation state −2- 2

Oxidation State Trends and Conceptual Practice Problems

Group-Wise Oxidation State Trends

Group 13 (Boron Family)
  • Higher oxidation state: +3+3

  • Lower oxidation state: +1+1

  • Stability order for +3+3 state: B3+>Al3+>Ga3+>In3+>Tl3+B^{3+} > Al^{3+} > Ga^{3+} > In^{3+} > Tl^{3+}

  • Stability order for +1+1 state: Tl+>In+>Ga+>Al+>B+Tl^+ > In^+ > Ga^+ > Al^+ > B^+

  • Tl1+Tl^{1+} is more stable than Tl3+Tl^{3+}. Therefore, compounds containing Tl3+Tl^{3+} act as strong oxidizing agents by converting into the more stable Tl1+Tl^{1+} state: \nTl^{3+} + 2e^- \rightarrow Tl^+\n

Group 14 (Carbon Family)
  • Higher oxidation state: +4+4

  • Lower oxidation state: +2+2

  • Stability order for +4+4 state: C4+>Si4+>Ge4+>Sn4+>Pb4+C^{4+} > Si^{4+} > Ge^{4+} > Sn^{4+} > Pb^{4+}

  • Stability order for +2+2 state: Pb2+>Sn2+>Ge2+>Si2+>C2+Pb^{2+} > Sn^{2+} > Ge^{2+} > Si^{2+} > C^{2+}

  • Pb4+Pb^{4+} acts as a strong oxidizing agent, whereas Sn2+Sn^{2+} acts as a strong reducing agent because Sn4+Sn^{4+} is more stable than Sn2+Sn^{2+}.

Group 15 (Nitrogen Family)
  • Higher oxidation state: +5+5

  • Lower oxidation state: +3+3

  • Stability order for +5+5 state decreases down the group.

  • Stability order for +3+3 state increases down the group (Bi3+Bi^{3+} is much more stable than Bi5+Bi^{5+}).

Group 16 (Oxygen Family)
  • Possible oxidation states: −2-2, 00, +2+2, +4+4, +6+6

  • Oxygen displays predominantly −2-2 and 00 states.

  • Sulfur and Selenium display stable +4+4 and +6+6 states.

  • Tellurium displays +2+2, +4+4, and +6+6 states; the lower oxidation state (+4+4) becomes increasingly stable relative to +6+6 down the group.

Conceptual Statements and True/False Practice

Statement 1: PbO2PbO_2 acts as a strong oxidizing agent.
  • Status: True

  • Explanation: Lead in PbO2PbO_2 is in the +4+4 oxidation state. Due to the inert pair effect, the +2+2 oxidation state is far more stable than +4+4 for Lead (PbPb). Hence, PbO2PbO_2 readily accepts electrons to reduce to Pb2+Pb^{2+}, functioning as a strong oxidizing agent. Note: Mixed oxides of lead include Pb2O3Pb_2O_3 (PbO+PbO2PbO + PbO_2) and Pb3O4Pb_3O_4 (2PbO+PbO22PbO + PbO_2).

Statement 2: PbI4PbI_4 does not exist.
  • Status: True

  • Explanation: Pb4+Pb^{4+} is a strong oxidizing agent and I−I^- is a strong reducing agent. Pb4+Pb^{4+} oxidizes I−I^- to elemental iodine (I2I_2), forming PbI2PbI_2 instead of PbI4PbI_4.

Statement 3: TlI3TlI_3 does not exist as Tl3+Tl^{3+} and 3I−3I^-.
  • Status: True

  • Explanation: Due to the inert pair effect, Tl1+Tl^{1+} is more stable than Tl3+Tl^{3+}. In solution/solid state, TlI3TlI_3 exists as an ionic compound containing the thallium(I) cation and triiodide anion: Tl^+ [I_3]^-$.\n\n### Statement 4: Sn^{2+} ions are good oxidizing agents.\n\n- **Status**: False\n- **Explanation**: For tin, Sn^{4+}ismorestablethanis more stable thanSn^{2+}.Therefore,. Therefore,Sn^{2+}loseselectronstoachievetheloses electrons to achieve the+4 state, acting as a **reducing agent**.\n\n### Statement 5: SO_2isareducingagent,whereasis a reducing agent, whereasTeO_2 is an oxidizing agent.\n\n- **Status**: True\n- **Explanation**: In SO_2,sulfurisinthe, sulfur is in the+4oxidationstateandcaneasilyexpanditsstatetothemorestableoxidation state and can easily expand its state to the more stable+6((SO_3),actingasareducingagent.In), acting as a reducing agent. InTeO_2,telluriumisinthe, tellurium is in the+4state;downGroup16,loweroxidationstatesarestabilized,makingstate; down Group 16, lower oxidation states are stabilized, makingTeO_2 prone to reduction, thereby acting as an oxidizing agent.\n\n### Statement 6: SnCl_2andandFeCl_3 cannot exist together in solution.\n\n- **Status**: True\n- **Explanation**: Sn^{2+}isastrongreducingagentandis a strong reducing agent andFe^{3+}isanoxidizingagent.Theyundergoaredoxreactionwhereis an oxidizing agent. They undergo a redox reaction whereSn^{2+}oxidizestooxidizes toSn^{4+}whilereducingyellowwhile reducing yellowFeCl_3((Fe^{3+})togreen) to greenFeCl_2((Fe^{2+}):\n Sn^{2+} + 2Fe^{3+} \rightarrow Sn^{4+} + 2Fe^{2+} \n\n### Statement 7: Stability of dihalides in Group 14 increases down the group.\n\n- **Status**: True\n- **Explanation**: Dihalides correspond to the +2oxidationstate.Duetotheinertpaireffect,thestabilityoftheoxidation state. Due to the inert pair effect, the stability of the+2stateincreasesdownGroup14(state increases down Group 14 (CX_2 < SiX_2 < GeX_2 < SnX_2 < PbX_2).\n\n\n# Periodic Physical Trends Across Groups 13 to 18\n\n## Atomic Radius / Size\n\n- General Trend: Atomic radius increases down a group due to the addition of new electronic shells.\n- Group 13 Exception: \n B < Ga < Al < In < Tl \n  Gallium (Ga)issmallerinsizethanAluminum() is smaller in size than Aluminum (Al).Thisanomalyisdueto∗∗transitioncontraction∗∗—thepoorshieldingexertedbythe). This anomaly is due to **transition contraction**—the poor shielding exerted by the10d−electrons(d-electrons (3d^{10}) present in Gallium, leading to a higher effective nuclear charge holding the valence shell.\n\n## Ionization Energy (IE)\n\n- General Trend: Decreases down a group as atomic size increases.\n- Groups 15 to 18 follow the standard decreasing trend down the group.\n- Group 13 Trend: \n B > Tl > Ga > Al > In \n  Tlhasahigherionizationenergythanhas a higher ionization energy thanIn,,Al,and, andGadueto∗∗lanthanidecontraction∗∗(poorshieldingofdue to **lanthanide contraction** (poor shielding of14f−electrons,f-electrons,4f^{14}).).Gahasahigherionizationenergythanhas a higher ionization energy thanAlduetotransitioncontraction(due to transition contraction (3d^{10} electrons).\n- Group 14 Trend:\n C > Si > Ge > Pb > Sn \n  Pbhasaslightlyhigherionizationenergythanhas a slightly higher ionization energy thanSnduetothepoorscreeningeffectofthedue to the poor screening effect of the4f orbitals (lanthanide contraction).\n\n## Boiling Point\n\n- Group 13 & 14: Boiling point **decreases** down the group.\n- Group 15 to 18: Boiling point **increases** down the group.\n\n## Melting Point\n\n- Groups 17 & 18: Melting point **increases** down the group.\n- Specific Relative Ranking (1 to 5 representing top-to-bottom element positions):\n - Group 13 (Boron Family): 1 > 2 > 5 > 4 > 3((B > Al > Tl > In > Ga)\n - Group 14 (Carbon Family): 1 > 2 > 3 > 5 > 4((C > Si > Ge > Pb > Sn)\n - Group 15 (Nitrogen Family): 5 > 4 > 1 > 2 > 3\n - Group 16 (Oxygen Family): 1 > 2 > 3 > 5 > 4\n\n## Density\n\n- General Trend: Increases down the group.\n- Carbon Family Exception: Diamond (an allotrope of carbon) is exceptionally dense due to its rigid 3D covalent network structure (\text{Diamond} > \text{Silicon}).\n\n## Electronegativity\n\n- General Trend: Decreases down the group.\n- Group 13 Values: B (2.0),,Al (1.5),,Ga (1.6),,In (1.7),,Tl (1.8) (decreases from B to Al, then increases slightly due to structural screening effects).\n- Group 14 Values: C (2.5),,Si (1.8),,Ge (1.8),,Sn (1.8),,Pb (1.9).\n- Groups 15, 16, and 17: Follow the expected monotonic decrease down the group.\n\n\n# Group-Wise Chemical Properties: Groups 13 and 14\n\n## Group 13 (Boron Family) Chemical Behavior\n\n### Nitride Formation\n\nElements react with Nitrogen at high temperatures to form binary nitrides of the type MN(e.g.,(e.g.,BN,,AlN).\n\n### Oxides\n\nForms oxides of the general formula E_2O_3:\n\n- B_2O_3: Acidic oxide\n- Al_2O_3,,Ga_2O_3: Amphoteric oxides\n- In_2O_3,,Tl_2O_3:Basicoxides(: Basic oxides (Tl_2O is also strongly basic)\n\n### Reactivity with Acids and Bases\n\n- Boron does not react with non-oxidizing acids or alkalis under normal conditions.\n- Aluminum reacts with both acids and alkalis (amphoteric nature). However, concentrated nitric acid (HNO_3)rendersAluminum∗∗passive∗∗duetotheimmediateformationofathin,protectiveoxidefilm() renders Aluminum **passive** due to the immediate formation of a thin, protective oxide film (Al_2O_3) on its surface.\n- Reaction with sodium hydroxide (NaOH):\n 2Al + 2NaOH + 6H_2O \rightarrow 2Na[Al(OH)_4] + 3H_2 \n\n### Halides\n\nForms trihalides of type EX_3(e.g.,(e.g.,BF_3,,BCl_3,,BBr_3).\n\n- All trihalides of boron are electron-deficient Lewis acids.\n- TlI_3doesnotcontaindoes not containTl^{3+};itexistsas; it exists asTl^+andandI_3^-.\n\n## Group 14 (Carbon Family) Chemical Behavior\n\n### Reactivity with Oxygen\n\nForms monoxides (EO)anddioxides() and dioxides (EO_2):\n\n- CO_2,,SiO_2,,GeO_2: Acidic oxides\n- SnO_2,,PbO_2,,SnO,,PbO: Amphoteric oxides\n- CO: Neutral oxide\n\n### Reactivity with Water\n\n- Carbon, Silicon, and Germanium do not decompose water.\n- Tin (Sn) reacts with steam to form tin dioxide and hydrogen gas:\n Sn + 2H_2O \, (\text{steam}) \rightarrow SnO_2 + 2H_2 \n- Lead (Pb) is unaffected by water due to the protective oxide layer formed on its surface.\n\n### Halides\n\nForms tetrahalides (EX_4)anddihalides() and dihalides (EX_2):\n\n- Most tetrahalides are covalent in nature.\n- Exceptions: PbF_4andandSnF_4are∗∗ionic∗∗becauseofthesmallsizeandhighelectronegativityofthefluorideanion(are **ionic** because of the small size and high electronegativity of the fluoride anion (F^-).\n- According to Fajan's Rules, covalent character increases with larger anion size (high polarizability). Therefore, iodides and bromides are more covalent.\n- PbI_4 does not exist.\n- Stability of dihalides increases down the group: CX_2 < SiX_2 < GeX_2 < SnX_2 < PbX_2.\n\n\n# Group-Wise Chemical Properties: Groups 15 and 16\n\n## Group 15 (Nitrogen Family) Chemical Behavior\n\n### Hydrides\n\nForms hydrides of type EH_3::NH_3,,PH_3,,AsH_3,,SbH_3,,BiH_3.\n\n### Oxides\n\nForms oxides of types E_2O_3andandE_2O_5:\n\n- For oxides of the same element, acidic strength is directly proportional to the oxidation state:\n \text{Acidic Strength} \propto \text{Oxidation State} \n E_2O_5 (+5) > E_2O_3 (+3) \n- N_2O_3, N_2O_5, P_4O_6, P_4O_10: Acidic\n- As_2O_3, Sb_2O_3: Amphoteric\n- Bi_2O_3: Basic\n\n### Halides\n\nForms trihalides (EX_3)andpentahalides() and pentahalides (EX_5):\n\n- Pentahalides (+5)aremorecovalentthantrihalides() are more covalent than trihalides (+3)duetohigherpolarizingpowerofthecentralatominthe) due to higher polarizing power of the central atom in the+5 oxidation state.\n- Nitrogen **cannot** form pentahalides (NX_5)duetotheabsenceofvacantd−orbitalsinitsvalenceshell() due to the absence of vacant d-orbitals in its valence shell (n=2).\n- Nitrogen trihalides: NF_3isstableandunreactive;is stable and unreactive;NCl_3,,NBr_3,and, andNI_3 are unstable and explosive.\n\n### Reactivity with Metals\n\nAll elements react with metals to form binary compounds exhibiting a -3oxidationstate:Nitrides(oxidation state: Nitrides (Ca_3N_2),Phosphides(), Phosphides (Ca_3P_2), Arsenides, Antimonides, and Bismuthides.\n\n## Group 16 (Oxygen Family) Chemical Behavior\n\n### Hydrides\n\nForms hydrides of type H_2E::H_2O,,H_2S,,H_2Se,,H_2Te,,H_2Po.\n\n### Oxides\n\nForms dioxides (EO_2)andtrioxides() and trioxides (EO_3):\n\n- Dioxides and trioxides are acidic in nature.\n- SO_2actsasareducingagent(oxidizesreadilyfromacts as a reducing agent (oxidizes readily from+4toto+6).\n- TeO_2 acts as an oxidizing agent.\n\n### Halides\n\nForms halides of types EX_2,,EX_4,and, andEX_6:\n\n- Among hexafluorides (EX_6),),SF_6 is exceptionally stable due to steric hindrance protecting the central sulfur atom.\n- Stability order of halides: Fluorides > Chlorides > Bromides > Iodides.\n\n\n# Group-Wise Chemical Properties: Group 17 (Halogens)\n\n## Hydrides\n\nForms hydrides of type HX::HF,,HCl,,HBr,,HI\n\n## Oxygen-Halogen Compounds\n\n### Compounds of Oxygen and Fluorine\n\nFluorine is more electronegative than Oxygen. Therefore, compounds of Oxygen and Fluorine are named **Oxygen Fluorides** (e.g., OF_2,,O_2F_2) rather than oxides.\n\n### Oxides of Chlorine, Bromine, and Iodine\n\nOxygen is more electronegative than Chlorine, Bromine, and Iodine. Thus, these are classified as **Halogen Oxides**.\n\n- Chlorine Oxides (Cl_2O,,ClO_2,,Cl_2O_6,,Cl_2O_7): Highly reactive, explosive, and potent oxidizing agents.\n- Bromine Oxides (Br_2O,,BrO_2,,BrO_3): Least stable among halogen oxides; exist only at low temperatures.\n- Iodine Oxides (I_2O_4,,I_2O_5,,I_2O_7):Insolublesolids,thermallystable.): Insoluble solids, thermally stable.I_2O_5isastrongoxidizingagentusedintheestimationofcarbonmonoxide(is a strong oxidizing agent used in the estimation of carbon monoxide (CO).\n\n### Relative Stability Order of Halogen Oxides\n\n \text{Iodine Oxides} > \text{Chlorine Oxides} > \text{Bromine Oxides} \n I > Cl > Br \n\n- **Reason for Iodine Oxide Stability**: High polarizability of Iodine creates strongly polar, durable bonds with oxygen.\n- **Reason for Chlorine Oxide Stability**: Chlorine utilizes vacant d-orbitals to form multiple d\pi-p\pi bonds with oxygen.\n- **Reason for Bromine Oxide Stability Minimum**: Bromine lacks both strong polarizability effect and efficient d\pi-p\pi overlap, leading to instability.\n\n## Interhalogen Compounds\n\nHalogens react with each other to form interhalogen compounds of types XX',,XX'_3,,XX'_5,and, andXX'_7:\n\n- X is the larger, more electropositive halogen.\n- X' is the smaller, more electronegative halogen.\n- Maximum coordination number is observed in IF_7 (Pentagonal bipyramidal structure) due to the large radius ratio between Iodine and Fluorine.\n\n\n# Group-Wise Comparative Trends for Hydrides\n\nMoving down the group for hydrides of Group 15 (NH_3 \rightarrow BiH_3),Group16(), Group 16 (H_2O \rightarrow H_2Te),andGroup17(), and Group 17 (HF \rightarrow HI):\n\n \begin{array}{|l|l|} \hline \mathbf{Property} & \mathbf{Trend \, Down \, the \, Group} \ \hline \text{Bond Length } (E-H) & \text{Increases} \ \hline \text{Bond Dissociation Energy} & \text{Decreases} \ \hline \text{Thermal Stability} & \text{Decreases} \ \hline  H^+ \text{ Donation Tendency in Water} & \text{Increases} \ \hline \text{Acidic Character} & \text{Increases} \ \hline  pK_a \text{ Value} & \text{Decreases} \ \hline \text{Reducing Property} & \text{Increases} \ \hline \text{Bond Angle (Groups 15 and 16)} & \text{Decreases} \ \hline \text{Lewis Basic Character} & \text{Decreases} \ \hline \end{array} \n\n## Notes on Specific Hydride Trends\n\n1. **Bond Angle in Group 17 Hydrides**: Halogen hydrides (HF, HCl, HBr, HI)arediatomiclinearmolecules() are diatomic linear molecules (180^\circ).\n2. **Reducing Property**: BiH_3isthestrongestreducingagentamongGroup15hydrides.is the strongest reducing agent among Group 15 hydrides.NH_3 is not a reducing agent.\n3. **Lewis Basicity**: NH_3 > PH_3 > AsH_3 > SbH_3 \ge BiH_3. As atomic size increases down the group, electron density of the lone pair spreads over a larger volume, decreasing the electron donor ability.\n\n## Melting Point and Boiling Point Anomalies of Hydrides\n\nDue to the presence of strong **intermolecular hydrogen bonding** in HF,,NH_3,and, andH_2O, their melting and boiling points are abnormally high compared to heavier hydrides in their respective groups.\n\n### Group 15 Hydrides\n\n- Boiling Point Order: \n PH_3 < AsH_3 < NH_3 < SbH_3 < BiH_3 \n- Melting Point Order: \n PH_3 < AsH_3 < SbH_3 < NH_3 \n\n### Group 16 Hydrides\n\n- Boiling Point Order: \n H_2S < H_2Se < H_2Te < H_2O \n- Melting Point Order: \n H_2S < H_2Se < H_2Te < H_2O \n\n### Group 17 Hydrides\n\n- Boiling Point Order: \n HCl < HBr < HI < HF \n- Melting Point Order: \n HCl < HBr < HF < HI \n\n\n# Group 18 Noble Gases and Xenon Chemistry\n\n## General Characteristics\n\n- Elements: Helium (He),Neon(), Neon (Ne),Argon(), Argon (Ar),Krypton(), Krypton (Kr),Xenon(), Xenon (Xe),Radon(), Radon (Rn),Oganesson(), Oganesson (Og).\n- All noble gases occur in the atmosphere except Radon and Oganesson. Argon is the most abundant noble gas in dry air (approx 1\% by volume).\n- Radon (Rn)andOganesson() and Oganesson (Og)areradioactive.Oganessonhasahalf−lifeof) are radioactive. Oganesson has a half-life of0.7\,\text{ms}.\n- Valence Configuration: ns^2 np^6(Heliumis(Helium is1s^2).\n- Physical State: Monoatomic, colorless, odorless, tasteless, sparingly soluble in water.\n- Helium has the lowest boiling point of any known substance (4.2\,\text{K}).\n- **Aqueous Tension**: Pressure exerted by water vapor (Dry air pressure = Total pressure - Aqueous tension).\n\n## Trends Down Group 18\n\n1. Atomic size and surface area increase.\n2. Adsorption capability increases (surface chemistry principle).\n3. Ionization energy decreases.\n4. Atomic mass and density increase.\n5. Melting and boiling points increase.\n6. Solubility in water increases.\n7. Ideal gas character decreases; Real gas character increases.\n\n## Xenon Chemical Reactions and Compounds\n\nIn 1962, Neil Bartlett prepared the first noble gas compound. He first reacted O_2withwithPtF_6toobtaintheredioniccompoundto obtain the red ionic compoundO_2^+ [PtF_6]^-$. Recognizing that the first ionization enthalpy of Xenon (1170 kJ mol−11170\,\text{kJ\,mol}^{-1}) is virtually identical to that of O2O_2 (1175 kJ mol−11175\,\text{kJ\,mol}^{-1}), he successfully reacted XeXe with PtF6PtF_6 to yield the red solid compound Xe^+ [PtF_6]^-$.\n\n### Fluorine Exchange Reactions\n\n1. Reaction with Fluoride Ion Acceptors (P-block fluorides like PF_5,,SbF_5):\n XeF_2 + PF_5 \rightarrow [XeF]^+ [PF_6]^- \n XeF_4 + SbF_5 \rightarrow [XeF_3]^+ [SbF_6]^- \n2. Reaction with Fluoride Ion Donors (S-block alkali metal fluorides like RbF,,CsF):\n XeF_6 + MF \rightarrow M^+ [XeF_7]^- \quad (M = Rb, Cs) \n\n### Hydrolysis Reactions of Xenon Fluorides\n\n1. **Complete Hydrolysis of XeF_2**:\n 2XeF_2 + 2H_2O \rightarrow 2Xe + 4HF + O_2 \n2. **Complete Hydrolysis of XeF_4 (Disproportionation)**:\n 6XeF_4 + 12H_2O \rightarrow 4Xe + 2XeO_3 + 24HF + 3O_2 \n3. **Complete Hydrolysis of XeF_6**:\n XeF_6 + 3H_2O \rightarrow XeO_3 + 6HF \n4. **Partial Hydrolysis of XeF_6**:\n XeF_6 + H_2O \rightarrow XeOF_4 + 2HF \n XeF_6 + 2H_2O \rightarrow XeO_2F_2 + 4HF \nNote: In XeO_3,,XeOF_4,and, andXeO_2F_2,Xenonmaintainsits, Xenon maintains its+6 oxidation state.\n\n\n# Anomalous Behavior of First Element and High-Yield Concepts\n\n## Anomalous Behavior of Second-Period Elements\n\nThe first element of each group in the p-block (Boron, Carbon, Nitrogen, Oxygen, Fluorine) differs significantly from the remaining members of its group due to:\n1. Exceptionally small atomic size.\n2. High electronegativity.\n3. High ionization enthalpy.\n4. Absence of vacant d-orbitals in its valence shell (n=2).\n5. Maximum covalency restricted to 4(e.g.,(e.g.,[BF_4]^-exists,butexists, but[BF_6]^{3-} does not).\n\n## Multiple Bonding Capability\n\nSecond-period elements can form strong p\pi-p\pimultiplebondswiththemselvesandothersecond−periodelements(e.g.,multiple bonds with themselves and other second-period elements (e.g.,C=C,,C\equiv C,,C=O,,C\equiv N,,N=N,,N\equiv N,,O=O).\n\nHeavier elements (3rd period and below) do not form effective p\pi-p\pibondsbecausetheiratomicorbitalsaretoolargeanddiffusetoundergoeffectivelateraloverlap(bonds because their atomic orbitals are too large and diffuse to undergo effective lateral overlap (3p\pi-3p\pioverlapisextremelyweak).Heavierelementsformoverlap is extremely weak). Heavier elements formd\pi-p\piorord\pi-d \pi bonds instead.\n\n \text{Stability Order of Overlap: } 2p\pi-2p\pi > 3d\pi-2p\pi > 3p\pi-3p\pi \n\n## High-Yield Points for Assertion-Reason Questions\n\n1. **Catenation in Group 14**: Carbon exhibits maximum catenation property owing to its high carbon-carbon bond energy (C-Cbondstrength).Catenationtendencydecreasesdownthegroup(bond strength). Catenation tendency decreases down the group (C \gg Si > Ge \approx Sn).Lead(). Lead (Pb) does not show catenation due to its large atomic radius and weak bond strength.\n2. **Reactivity of Dinitrogen (N_2)∗∗:Dinitrogenischemicallyinertatroomtemperaturebecauseoftheexceptionallyhighbonddissociationenergyofthe)**: Dinitrogen is chemically inert at room temperature because of the exceptionally high bond dissociation energy of theN \equiv Ntriplebond(triple bond (941.4\,\text{kJ\,mol}^{-1}).\n3. **Single Bond Strength of Nitrogen vs Phosphorus**: The single N-Nbondisweakerthanthesinglebond is weaker than the singleP-P bond because of high inter-electronic repulsion of non-bonding lone pairs present on the small nitrogen atoms.\n4. **Physical State of H_2OvsvsH_2S∗∗:**:H_2Oisaliquidatroomtemperature,whereasis a liquid at room temperature, whereasH_2Sisagas.Oxygenissmallandhighlyelectronegative,formingstrongintermolecularhydrogenbondsinis a gas. Oxygen is small and highly electronegative, forming strong intermolecular hydrogen bonds inH_2O.Sulfurhaslowerelectronegativityandlargersize,preventinghydrogenbondingin. Sulfur has lower electronegativity and larger size, preventing hydrogen bonding inH_2S.\n5. **Passivity of Aluminum**: Aluminum dissolves in dilute mineral acids and aqueous alkalis, but becomes passive in concentrated nitric acid (HNO_3)duetotheformationofaprotectivelayerofaluminumoxide() due to the formation of a protective layer of aluminum oxide (Al_2O_3$$) on its surface.