Comprehensive Guide to Automotive Primers, Fillers, and Coating Systems

Fundamental Functional Classifications in Automotive Refinishing

  • Grundierungen / Primers (Adhesion Promoters and Anti-Corrosion Undercoats):

    • Primary functional purpose centers on establishing chemical and mechanical adhesion (Haftvermittlung) between the bare substrate and subsequent paint layers.
    • Imparts active or passive corrosion protection (Korrosionsschutz) directly onto metallic substrates.
    • Formulated as thin-film coatings with minimal film build, prioritizing interfacial bonding over surface leveling.
  • Füller / Surfacers (Fillers):

    • Primary role is building film thickness (Schichtaufbau) to smooth, level, and planarize the surface.
    • Fills sanding scratches (Schleifriefen), surface texture variations, porosity, and minor topographical imperfections.
    • Designed structurally for post-cure mechanical abrasion; requires sanding (anschließend meist schleifen) prior to topcoat application to ensure mechanical keying and optical DOI (Distinctness of Image).
  • Grundierfüller / Primer-Fillers (Primer-Surfacers):

    • Hybridized coatings that integrate both primary functions in a single product: substrate adhesion/corrosion prevention (Grundieren) combined with substantial filling and leveling power (Füllen).
    • Eliminates the necessity for separate application cycles of a dedicated primer followed by a dedicated surfacer in standard refinish operations.
  • Nass-in-Nass / Wet-on-Wet (NiN) Systems:

    • Specialized application technique and coating formulation where the applied material is not sanded prior to topcoating.
    • After a specified flash-off and evaporation period (Ablüftzeit), topcoats or basecoats are applied directly onto the semi-cured film, providing chemical cross-linking between coats and maximizing process efficiency.

1K Primer and Filler Formulations

  • WBS 1K-Grundierfiller:

    • Chemical Basis and Function: Water-based 1K primer-filler (Wasserbasierter 1K-Grundierfiller) combining active priming with high filling efficacy.
    • Substrate Adhesion: Exhibits direct adhesion to iron (Eisen), zinc (Zink), and aluminium (Aluminium).
    • Protective Properties: Offers very high corrosion protection (sehr guter Korrosionsschutz).
    • Processing Characteristics: Rapid drying (schnelltrocknend) and exceptional sandability (gut schleifbar).
    • Topcoat Compatibility: Fully recoatable with both 1K and 2K topcoats (Decklacke), compatible with water-borne (wasserbasiert) as well as solvent-borne (lösemittelbasiert) systems.
    • Thinning Specifications: Can be thinned as needed up to 5%5\% using WBC Thinner (WBC Verdünnung) or WBS Water (WBS Wasser).
    • Color Formulation: Dark grey (dunkelgrau), approximately RAL 70117011.
    • Repair Spectrum: Suitable for repairs on iron, zinc, aluminium, and serves as an isolating barrier layer (Isolierung) over thermoplastic old paintwork (thermoplastische Altlackierungen).
  • 1K-Glasprimer:

    • Functional Classification: Specialized adhesion promoter specifically formulated for glass; possesses zero filling power (kein Füller, sondern Haftvermittler für Glas).
    • Optical Property: Transparent.
    • Target Surface: Exclusively engineered for glass substrates to enhance interfacial paint adhesion significantly.
    • Delivery Form: Ready-to-spray (Spritzfertig).
    • Recoatability: Can be overcoated with 2K acrylic/polyurethane topcoats (2K-Acryl-/PUR-Decklacke) or basecoat/water-based basecoat systems combined with 2K clearcoats (BC/WBC + 2K Klarlack).
  • 1K-Primer N 75 Spray:

    • Classification and Build: 1K aerosol primer (1K-Grundierung) featuring very high filling capacity (sehr hohe Füllkraft).
    • Drying and Sanding: Rapid dry-to-touch times paired with fast sanding capability (schnell trocknend und schnell schleifbar).
    • Primary Utility: Engineered specifically for micro-repairs and spot repairs (Spot Repair).
    • Direct Substrate Adhesion: Adheres directly to iron, steel (Eisen und Stahl), and numerous plastics (auf vielen Kunststoffen).
    • Recoatability: Overcoatable with 1K and 2K topcoats, covering both solvent-based and water-based systems.
    • Approved Applications: Iron substrates, paintable plastics (lackierbare Kunststoffe), and localized spot repair zones.
    • Explicit Incompatibilities: Unsuitable for aluminium, zinc substrates, and thermoplastic old paint (thermoplastischer Altlack).
  • 1k-Isolator:

    • System Classification: 1K specialty barrier primer (1K-Spezialprimer / Grundierung).
    • Functional Mechanism: Formulated for solvent-sensitive legacy finishes (lösemittelempfindliche Altlackierungen); effectively prevents lifting, bleeding, and solvent attack/wrinkling (Verhindert Hochziehen by ensuring the old paint matrix does not soften).
    • System Compatibility: Recoatable using Mipa 1K and 2K paint materials.
    • Application Focus: Ideal for problematic, solvent-sensitive historical paint repairs.
    • Substrate Exclusion: Not suitable for bare sheet metal (blankes Blech).

Reactive Acid Primers and Washprimers (1K and 2K)

  • Chemical Mechanism and Metallurgy:

    • Acid primers contain reactive, acid-etch components that chemically treat the bare metal surface, providing micro-etch adhesion and passivating the substrate to generate superior corrosion resistance.
    • Crucial surface preparation choice for bare steel, zinc, and aluminium.
  • Rapidprimer:

    • Formulation: 1K etch adhesion primer (1K-Haftprimer) with active anti-corrosive properties.
    • Substrate Affinity: Adheres to iron/steel, zinc, and aluminium; also approved for numerous paintable automotive plastic components (lackierbare PKW-Kunststoffteile).
    • Mechanical Preparation: Zinc and aluminium substrates must be scuffed/sanded (anschleifen) prior to application.
    • Spray Viscosity Adjustment: Thinned by 50%50\% for spray application using V10, V25, or UN/UN21 thinners.
    • Critical Restrictions: Must not be applied onto thermoplastic substrates; must never be directly overwritten with polyester spray fillers (Polyester-Spritzfüller).
    • Design Philosophy: Engineered exclusively for adhesion promotion and active anti-corrosion protection, not for film build or gap filling (nicht auf Schichtaufbau ausgerichtet).
    • Suitability: Repairs on iron, zinc, aluminium, and select automotive plastics; incompatible with legacy paint finishes and thermoplastic substrates.
  • Rapidfiller:

    • Formulation: Fast-drying 1K filler (1K-Füller) emphasizing leveling capacity.
    • Surface Leveling: Good filling power designed to eliminate sanding marks and minor surface unevenness (Egalisieren von Schleifspuren und Unebenheiten).
    • Substrates and Protection: Integrates anti-corrosive properties while adhering to iron, zinc, aluminium, and suitable plastics.
    • Operational Focus: Balanced towards filling performance and high sandability (Füllwirkung und Schleifbarkeit).
    • Application Scope: Bare metal and feathered transition zones of thoroughly sanded, sound existing coatings (Übergangszonen angeschliffener tragfähiger Altlack).
    • Exclusions: Incompatible with solvent-sensitive and thermoplastic old paintwork.
  • Etch-Filler HB:

    • Terminology: "Etch" indicates reactive/etching performance (anätzend/reaktiv); "HB" denotes High Build (hoher Schichtaufbau).
    • Hybrid Performance: Combines chemical metal etching and active anti-corrosion protection with substantial film thickness.
    • Formulation: 1K high-build reactive primer-surfacer.
    • Substrate Capabilities: Strong adhesion across iron, steel, zinc, paintable automotive plastics, and aluminium (provided appropriate pretreatment is executed).
    • Critical Processing Prohibitions: Do not overcoat with polyester materials (nicht mit Polyester-Materialien überarbeiten); do not apply to thermoplastic surfaces.
    • Approved Usage: Iron, zinc, pretreated aluminium, and qualified plastics.
  • 1K-Fast-Filler:

    • Functional Blend: Combines metal adhesion with surfacer filling capability.
    • Universal Adhesion Spectrum: Adheres to steel, aluminium, galvanized sheet metal (verzinktes Blech), OEM e-coats/factory primers (Werksgrundierung), and thoroughly sanded intact 2K legacy finishes (angeschliffene intakte 2K-Altlackierungen).
    • Transition Zone Optimization: Highly suited for blend zones and spot repair edges (Übergangszonen).
    • Performance Attributes: Rapid drying, easy sandability, and active corrosion protection.
    • Contraindications: Unsuitable for thermoplastic old coatings.
  • 2K-Primer CF:

    • Classification: Thin-film 2K adhesion and anti-corrosion primer (Dünnschichtige Haft- und Korrosionsschutzgrundierung).
    • Filling Capacity: Minimal filling action (geringe Füllwirkung).
    • Substrate Suitability: Formulated for bare iron, aluminium, and galvanized sheet metal; incompatible with old coatings (nicht geeignet für Altlackierung).
    • Hardener Configuration: Mixed at a volumetric ratio of 2:12:1 with hardener WPZ.
  • Aktivprimer:

    • Classification: Dedicated 2K washprimer / acid primer (2K-Washprimer/Säureprimer).
    • Operational Core: Provides maximized active corrosion protection specifically optimized for non-ferrous metals, notably aluminium, iron, and galvanized metal.
    • Film Build: Deposits an ultra-thin adhesive passivation layer (Dünne Haftschicht).
    • Hardener and Viscosity: Requires hardener WPZ; strictly applied without added thinner (keine Verdünnung notwendig).
    • Critical Overcoating Rule: Must never be overcoated directly with epoxy-based or water-based paint systems (nicht mit Epoxy- oder wasserbasierten Lacksystemen überlackieren).
    • Standard Coating Sequence: Aktivprimer →\rightarrow Füller (Surfacer) →\rightarrow Decklack (Topcoat).

Standard 2K Acrylic Primers and Universal Multi-Fillers

  • General Performance of 2K Primer and Filler Systems:

    • Formulated as two-component systems consisting of base paint (Stammlack) and chemical polyisocyanate or reactive hardener (Härter), curing via chemical polyaddition.
    • Delivers substantially superior mechanical durability, weather resistance, and chemical resistance compared to physical-drying 1K systems.
    • Standard for complete automotive refinish panels, extensive surface repairs, and substrate stabilization.
    • Corrosion Protection Caveat: 2K fillers do not automatically confer anti-corrosion protection; formulations divide between dedicated sanding fillers and hybrid anti-corrosive primer-surfacers.
  • 4+1 Acrylfiller HS:

    • Application Class: High-solid (HS) surfacer for standard refinish bodywork (klassische Reparaturlackierung).
    • Substrate Targets: Sanded sound legacy finishes (tragfähige Altlackierung), primed components, and repair transition zones.
    • Spot Metal Caveat: Applicable over minor bare sheet metal breakthroughs, but provides no corrosion protection (hat aber keinen Korrosionsschutz).
    • Build and Sanding: High filling capacity generating cured dry film thicknesses ranging from 50 μm50\,\mu\text{m} to 300 μm300\,\mu\text{m}; exceptional sanding properties.
    • Hardener Chemistry: Adaptable to HS, MS, and H hardeners.
    • Thinning: Adjusted selectively to match specific workshop application parameters.
  • 2K-HS-Grundierfiller F54:

    • Function: True primer-filler delivering direct metal adhesion, active corrosion protection, and heavy filling performance simultaneously.
    • Substrate Compatibility: Bare metal repair spots, primed surfaces, prepared transition zones, spot repair operations, and partial panel resprays.
    • Operational Characteristics: High filling volume combined with rapid, clean sandability.
    • Mixing and Dilution: Mixed at a ratio of 4:14:1 with hardeners H10 or H5; thinned at 5–10%5\text{--}10\%.
  • 2K-Multifiller:

    • All-Rounder Integration: Single-formulation multi-product operating as a conventional sanding surfacer (Schleiffüller), wet-on-wet surfacer (Nass-in-Nass), or plastic adhesion filler (Kunststofffüller).
    • Substrate Versatility: Directly applicable to steel/iron, aluminium, galvanized steel, commercial plastics, glass-fiber reinforced plastic (GFK), sound legacy coatings, and feathered repair edges.
    • Protective Property: Does not possess active anti-corrosion protection (keinen aktiven Korrosionsschutz).
    • Catalysis and Dilution: Processable with HS, MS, and H hardeners; diluted conditionally according to selected application mode.

Wet-on-Wet (NiN) Systems and Non-Sanding Sealers

  • 2K-HS-Fillprimer:

    • Process Category: Non-sanding wet-on-wet (NiN) primer-surfacer.
    • Core Function: Engineered to establish a smooth, optically uniform substrate rapidly across varying surface textures without intermediate dry cycles.
    • Substrates: Bare steel, iron, sound existing paint, and repaired zones.
    • Corrosion Limitation: Does not function as a dedicated anti-corrosive primer.
    • Recoat Window: Recoatable after an initial flash-off period of 15 min15\,\text{min} at 20∘C20^\circ\text{C}, remaining overcoatable without intermediate sanding (ohne Zwischenschliff) for up to a maximum of 5 days5\,\text{days}.
    • Catalysis and Thinning: Mixed at a ratio of 5:15:1 with hardeners H10, MS10, or MS25; thinned with 20–25%20\text{--}25\% V25.
  • 2K-HS-NiN-Füller F37:

    • Chemical Class: 2K polyurethane wet-on-wet surfacer (2K-PU-NiN-Füller).
    • Film Build: Formulated with deliberately low filling power (geringe Füllkraft) to maximize flow and laydown smoothness.
    • Substrates: Steel, iron, aluminium, galvanized sheet metal, automotive plastics, and intact original finishes.
    • Corrosion Profile: Cannot be used as a primary anti-corrosion barrier.
    • Overcoat Parameters: Recoatable after 15 min15\,\text{min} at 20∘C20^\circ\text{C}; open without intermediate abrasion for up to 5 days5\,\text{days}.
    • Formulation Ratios: Catalyzed at 5:15:1 with hardeners H10, MS10, or MS25; thinned using 25–30%25\text{--}30\% V25.
  • 2K-Transparent Sealer:

    • Function: Colorless 2K adhesion-promoting sealer (Farbloser 2K-Haftvermittler).
    • Process Advantage: Permits topcoat application directly onto sound, existing legacy paint coats without requiring prior abrading or sanding (ohne diese zuerst anschleifen zu müssen).
    • Substrate Restrictions: Possesses zero direct adhesion onto bare iron, steel, aluminium, or plastics (keine Direkthaftung auf Eisen, Stahl, Aluminium und Kunststoffen).
    • Application Format: Wet-on-wet (NiN).
    • Flash and Recoat Schedule: Recoatable at 20∘C20^\circ\text{C} within 15–20 min15\text{--}20\,\text{min}; maximum open time without mechanical sanding is 24 h24\,\text{h}.
    • Mixing Parameters: Catalyzed at 2:12:1 using H10, MS10, MS25, or MS40; adjusted with 0–5%0\text{--}5\% V25 thinner.

Rapid-Curing Ambient Systems: 2K Express-Filler Series

  • Core Engineering Philosophy of the Express Line:

    • Developed to achieve full mechanical dry-to-sand properties rapidly at ambient room temperature (20∘C20^\circ\text{C}).
    • Eliminates reliance on heated spray booths or dedicated thermal oven baking cycles (Ofentrocknung), cutting energy consumption and repair cycle durations.
  • 2K-HS-Express-Filler FX 4:

    • Application Focus: Pure express sanding surfacer (Express Schleiffüller) optimized for small-to-medium paint damage, panel blends, and spot repair operations.
    • Approved Substrates: Repair zones, thoroughly sanded sound old coatings, and featheredge areas.
    • Anti-Corrosion Profile: Lacks dedicated corrosion-preventive inhibitors.
    • Cure Kinetics: Extremely rapid drying profile; reaches complete sandability in approximately 35 min35\,\text{min} at 20∘C20^\circ\text{C}.
    • Formulation: High filling build; mixed at 4:14:1 with hardener H5 and adjusted with 15%15\% V 25 thinner.
  • 2K-HS-Express-Filler FX 5:

    • Dual Application Profile: Operates flexibly as either an accelerated sanding surfacer (Schleiffüller) or a non-sanding wet-on-wet surfacer (NiN).
    • Substrate Subtlety (Bare Metals): Direct application to steel, iron, aluminium, and zinc is permitted provided bare metal areas undergo mandatory pre-treatment with specialized Pre-Cleaner "Express" (Vorreiniger "Express").
    • Corrosion Limitation: Not applicable as a dedicated anti-corrosive primer.
    • Drying Rates: Sandable within approximately 20–40 min20\text{--}40\,\text{min} at 20∘C20^\circ\text{C}; when processed in NiN mode, recoatable within 5 min5\,\text{min} at 20∘C20^\circ\text{C}.
    • Catalysis System: Mixed at a volumetric ratio of 2:12:1 using hardener HX 25; thinned with 10%10\% solvent.
  • 2K-HS-Express-Filler FX 6:

    • Technological Distinction from FX 5: Possesses direct, universal adhesion onto bare metals without requiring specialized pre-cleaning steps (direkte universelle Metallhaftung ohne Vorreinigen).
    • Direct Adhesion Spectrum: Bonds straight to steel, iron, aluminium, zinc, blend zones, and standard prepared repair substrates.
    • Operational Modes: Wet-on-wet capable after approximately 15 min15\,\text{min}.
    • Anti-Corrosive Status: Does not replace a designated anti-corrosion primer.
    • Thermal Sanding Benchmarks: Fully sandable in 30–40 min30\text{--}40\,\text{min} at ambient 20∘C20^\circ\text{C}, or within 10 min10\,\text{min} under thermal acceleration at 60∘C60^\circ\text{C}.
    • Mixing Ratio: Catalyzed at 4:14:1 with hardener H10; thinning adjusted selectively per application mode.

Ecological High-Solid Systems: Partially Renewable Raw Materials

  • 2K-HS Filler EF42:
    • Ecological Profile: Sanding surfacer synthesized partially with renewable, bio-based raw materials (nachwachsende Rohstoffe).
    • Substrate Bonding: Sound old paintwork, transition featheredges, and pre-primed metallic panels.
    • Corrosion Protection: Does not possess active anti-corrosive characteristics.
    • Curing and Sanding Windows:
    • Ambient cure: Ready to sand in 3–5 h3\text{--}5\,\text{h} at 20∘C20^\circ\text{C}.
    • Forced thermal cure: Ready to sand in 20–30 min20\text{--}30\,\text{min} at 60∘C60^\circ\text{C}.
    • Catalyst and Reducer: Mixed at a ratio of 4:14:1 with hardeners EMS25 or HS10; thinned between 0–10%0\text{--}10\% with V10 or V25.

Epoxy Resin-Based Primers and Fillers (EP Systems)

  • Material Science and Protective Properties of Epoxy Coatings:

    • Formulated on highly cross-linked epichlorohydrin/bisphenol epoxy resin polymers (Epoxidharzbasis).
    • Forms dense, chemically resistant, impermeable polymer networks delivering maximal mechanical toughness, moisture exclusion, and passivation of metals against oxidation.
    • Serves as the premier standard for high-grade restoration, heavy-duty anti-corrosion protection, and substrate isolation.
  • EP-Grundierfiller:

    • Functional Multitool: Highly versatile universal epoxy product operating interchangeably as an adhesion washcoat (Haftgrund), primer-filler (Grundierfüller), or high-build sanding surfacer (Schleiffüller).
    • Properties: Strong anti-corrosive barrier, high mechanical metal bonding, and outstanding isolation efficacy (Isolierwirkung).
    • Universal Substrate Adhesion: Adheres directly to steel, iron, aluminium, galvanized sheet metal, and intact historical paint.
    • Filling Build: High solid content enabling heavy layer thickness.
    • Catalysis System: Mixed at a ratio of 2:12:1 with epoxy hardeners E10 or E25; thinned with 0–10%0\text{--}10\% EP Thinner (EP-Verdünnung).
  • 2K-EP-Expressprimer EPX:

    • System Characteristics: Fast-drying 2K epoxy wet-on-wet primer (Schnelltrocknender 2K-EP-NiN-Primer).
    • Corrosion Protection: High-grade active corrosion protection (hoher Korrosionsschutz).
    • Adhesion Envelope: Adheres directly to steel, iron, aluminium, and galvanized surfaces.
    • Throughput Velocity: Overcoatable at ambient temperature (20∘C20^\circ\text{C}) within 20–30 min20\text{--}30\,\text{min}.
    • Catalysis and Dilution: Mixed at a 1:11:1 volumetric ratio with specialized hardener EPH; applied without added reducer (Verdünnung: nicht notwendig).
  • EP-Primer-Surfacer:

    • Environmental Compliance: Chromate-free 2K epoxy wet-on-wet primer-surfacer (chromatfreier 2K-EP-NiN-Grundierfüller).
    • Performance Highlights: Active anti-corrosion passivation coupled with extremely fast overcoating capabilities.
    • Substrates: Iron, steel, aluminium, and zinc-coated steel.
    • Polyester Compatibility: Displays complete polyester compatibility (Polyesterverträglichkeit), permitting subsequent polyester spray filler or body filler applications without resin degradation or adhesion failure.
    • Formulation Setup: Catalyzed at 2:12:1 with hardener E5; diluted using 10–25%10\text{--}25\% 2K Thinner (2K-Verdünnung).
  • 1K-Epoxy-Primer-Spray:

    • Formulation and Safety: Chromate-free 1K epoxy aerosol packaging (Chromatfrei).
    • Protective and Barrier Dynamics: High anti-corrosive barrier performance combined with reliable isolation properties (gute Isolierwirkung).
    • Filling and Curing: Exhibits solid filling power and unusually rapid sanding capability for a 1K system, reaching sandable hardness within 30 min30\,\text{min}.
    • Substrates: Steel, iron, aluminium, old painted layers, and featheredged transition zones.