Simple Harmonic Motion Study Notes

Fundamentals of Simple Harmonic Motion

  • Simple harmonic motion (SHM) occurs when an object that is in equilibrium is displaced by an external force.

  • Instead of moving away indefinitely, a restoring force acts upon the object to return it toward the equilibrium position.

  • Equilibrium is the position located exactly in the middle of the oscillation path.

  • The continuous action of these restoring forces results in the repetitive back-and-forth motion defined as simple harmonic motion.

  • Common examples of SHM include:

    • A child being pushed on a swing.

    • A mass-spring oscillator, which bounces up and down.

    • A pendulum, which swings back and forth.

Characteristics and Period of Oscillation

  • The period (TT) is a critical characteristic of harmonic motion.

  • Period is defined as the time it takes for an object to complete one full cycle of motion.

    • For an oscillating spring, it is the time required to move from a starting point, bounce up, and return to the original position.

    • For a pendulum, it is the time to swing from one side to the other and back again.

  • The period is always measured in seconds (ss).

Mass-Spring Oscillators

  • In a mass-spring system, the period is determined by the mass attached to the spring and the stiffness of the spring.

  • Mass (mm) and Period:

    • Increasing the mass hanging from the spring increases the period (T↑T \uparrow as m↑m \uparrow).

    • Experimentation with masses of 50 g50\,g, 100 g100\,g, and 250 g250\,g demonstrates that as the mass increases, the period slows down.

  • Stiffness and Period:

    • The stiffness of the spring is represented by the spring constant (kk).

    • Increasing the stiffness of the spring (a higher spring constant) decreases the period (T↓T \downarrow as k↑k \uparrow).

    • A "soft" spring with low stiffness results in a very large period.

  • Quantitative Relationship:

    • Algebraically, mass (mm) is in the numerator and the spring constant (kk) is in the denominator of the period equation:     Ts=2πmkT_s = 2\pi\sqrt{\frac{m}{k}}

Pendulums

  • The period of a pendulum is determined by its length and the local gravitational field strength.

  • Length (LL) and Period:

    • Increasing the length of the pendulum increases the period (T↑T \uparrow as L↑L \uparrow).

    • Dropping a pendulum from a 30∘30^\circ angle at different lengths yields different periods:

      • At a specific length, the period is 2.862 s2.862\,s.

      • At a shorter length, the period decreases to 2.415 s2.415\,s.

      • Further decreasing the length continues to decrease the period.

  • Gravitational Field Strength (gg) and Period:

    • Increasing the gravitational field strength decreases the period (T↓T \downarrow as g↑g \uparrow).

    • Observations across different environments:

      • Moon: Lower gravity results in an increased period (slower motion).

      • Earth: Standard gravity results in a standard period.

      • Jupiter: Higher gravity results in a decreased period (faster motion).

      • Zero Gravity: The object continues moving without oscillating back.

  • Mass and Pendulums:

    • In a pendulum system, the mass of the bob has no effect on the period of oscillation.

  • Quantitative Relationship:

    • Algebraically, length (LL) is in the numerator and gravitational field strength (gg) is in the denominator of the period equation:     Tp=2πLgT_p = 2\pi\sqrt{\frac{L}{g}}

Dynamics of Motion: Position, Velocity, and Acceleration

  • In a horizontal system with two springs, the motion can be analyzed by looking at the specific state of the object at three key points.

  • The acceleration can be visualized using an accelerometer with LEDs. There is no acceleration when the object is exactly at the equilibrium (middle) position.

1. Maximum Displacement to the Left

  • Position: Maximum towards the left.

  • Velocity: Minimum (0 m/s0\,m/s) as the object momentarily stops to change direction.

  • Acceleration: Maximum towards the right (the restoring force is pulling back toward equilibrium).

2. Equilibrium (Center Position)

  • Position: Minimum (00).

  • Velocity: Maximum; the object has been accelerated to its highest speed as it passes the center.

  • Acceleration: Minimum (0 m/s20\,m/s^2); there is no net restoring force at the exact center.

3. Maximum Displacement to the Right

  • Position: Maximum towards the right.

  • Velocity: Minimum (0 m/s0\,m/s).

  • Acceleration: Maximum towards the left (the restoring force pulls back toward equilibrium).