Comprehensive Study Notes on Refraction of Light, Dispersion, and Spherical Mirrors
Fundamentals of Refraction and Optical Media
Rectilinear Propagation vs. Bending of Light:
Light typically travels along a straight path in a uniform medium, a phenomenon known as rectilinear propagation.
When light travels obliquely from one transparent material into another, its path deflects at the boundary separating the two media.
Definition of Optical Medium:
An optical medium is defined as anything through which light can travel.
Examples of optical media include vacuum, air, water, and glass.
Definition of Refraction:
Refraction of light is defined as the bending of light, or the change in the direction of light, as it passes from one medium into another.
Refraction differs fundamentally from reflection: in reflection, light bounces back into the original medium, whereas in refraction, light penetrates into the second medium and changes its path.
Introductory Demonstrations of Refraction:
Bent Straw Demonstration: When a straight drinking straw is placed inside an empty glass and water is subsequently poured in, the submerged section of the straw appears distinctly bent at the surface of separation.
Apparent Displacement of a Coin: When a coin is placed at the bottom of an opaque bowl and viewed from an angle where it is just out of sight, pouring water into the bowl causes the coin to appear to rise upward and become visible, appearing closer to the surface.

Speed of Light, Mechanism of Refraction, and Optical Density
Physical Cause of Refraction:
Refraction occurs because light travels with different speeds in different media.
Light propagates fastest through a vacuum at an exact speed of (commonly approximated as or ).
Light travels slightly slower through air than through a vacuum, travels considerably slower through water, and travels slower still through glass.
When a ray of light crosses the boundary between two media at an angle, the sudden change in propagation speed causes the light wavefront to pivot, altering its direction of travel.
Mechanical Analogy:
The bending of light due to speed variation is directly analogous to the steering behavior of a wheeled vehicle, such as a stroller or pram, transitioning from a paved pathway onto grass.
When one wheel crosses from the pavement onto a lawn, it slows down while the opposite wheel on the smooth pavement continues at normal speed, causing the entire stroller to rotate toward the slower side.
Experimental Verification with Smoke and Colloidal Suspension:
A glass bottle is partially filled with water containing a few drops of milk (which scatters light to make the beam visible in the liquid).
A lit joss stick (agarbatti) is placed into the empty upper half of the bottle to trap smoke, rendering the path of light visible in the air above the water, after which the bottle is sealed.
A narrow beam of light from a laser pointer or high-intensity torch is directed through the bottle at various angles:
When the beam strikes the water surface obliquely, it abruptly bends at the interface.
The extent to which the ray bends depends directly on the angle of incidence.
When the light ray strikes the boundary perpendicular to the surface ( to the surface, or along the normal), it does not bend at all and passes through undeviated.
Ray Diagrams and Geometrical Terminology of Refraction
Constituent Elements of a Refraction Ray Diagram:
Boundary (): The plane surface of separation separating the two distinct optical media.
Point of Incidence (): The exact point on the interface where the incident ray strikes.
Incident Ray (): The ray of light travelling through the initial medium toward the boundary.
Normal (): An imaginary reference line constructed perpendicular () to the boundary at the point of incidence .
Refracted Ray (): The ray of light travelling through the secondary medium away from the boundary.
Angle of Incidence (): The angle formed between the incident ray () and the normal ().
Angle of Refraction (): The angle formed between the refracted ray () and the normal ().
Refractive Index and Mathematical Formulations
Definition of Relative Refractive Index:
The extent of bending undergone by a light ray when crossing from one medium into another depends upon the relative speeds of light in both media.
The refractive index is a dimensionless ratio, denoted by , defining the degree to which light refracts between two media:
For light travelling from air into water, the relative refractive index is written as:
Worked Example:
Problem Statement: The speed of light in air is and that in glass is . Calculate the refractive index of glass with respect to air.
Calculation: Considering light travelling from air into glass:
Result: The refractive index of glass with respect to air is .
Absolute Refractive Index and Reference Standards:
Because refractive index is a ratio comparing speeds between two media, the media involved must be defined.
Vacuum is chosen as the universal standard of comparison because light achieves its maximum speed in a vacuum.
The absolute refractive index of any medium is defined as the ratio of the speed of light in vacuum to the speed of light in that medium: where is the speed of light in vacuum and is the speed of light in the specified medium.
The refractive index of air is (approximately ), which means the speed of light in air is practically identical to that in a vacuum. Consequently, air is used as the practical reference medium, allowing the phrase "refractive index of glass with respect to air is " to be simplified to "the refractive index of glass is " ().
Table of Standard Refractive Indices:
Air: (almost )
Water:
Alcohol:
Kerosene:
Types of glass:
Diamond:
Optical Density:
Transparent media with higher refractive index values are defined as optically denser.
Transparent media with lower refractive index values are defined as optically rarer.
Optical density is relative: water is optically denser than air (), but optically rarer than glass ().
Diamond () is optically denser than almost all other common transparent media.
Fundamental Rules of Refraction and Reversibility of Light
General Rules Governing Refraction:
Normal Incidence Rule: Light refracts only if it strikes the boundary obliquely (at an angle to the normal). A ray incident perpendicular to the surface () travels straight through without any deviation ().
Rarer to Denser Medium Rule: When a light ray travels from an optically rarer medium into an optically denser medium (e.g., air to water, or air to glass), it bends towards the normal ().
Denser to Rarer Medium Rule: When a light ray travels from an optically denser medium into an optically rarer medium (e.g., water to air, or glass to air), it bends away from the normal ().
Principle of Reversibility of Light:
If a ray of light follows a specific geometrical path from point in a first medium to point in a second medium, it will follow the exact same geometrical trajectory in reverse when travelling from point to point .
Ray diagrams representing refraction are completely reversible; reversing the direction of all directional arrows yields a physically accurate and valid ray path.

Optical Phenomena and Everyday Effects of Refraction
Apparent Bending of Submerged Objects:
Light rays emerging from the submerged portion of an object (such as a pencil or drinking straw) pass from water into air.
Because water is optically denser than air, the light rays bend away from the normal upon exiting the water surface.
When these diverging rays reach the observer's eyes, the brain projects them backwards in straight lines, producing a virtual image located above and displaced from the true position of the object.
Apparent Elevation of Coins and Water Beds:
Light rays originating from a coin at the bottom of a container refract away from the normal upon entering the air, making the coin appear to sit at a shallower depth.
Similarly, the bed of a swimming pool or any body of water appears substantially shallower than its actual depth.
Apparent Elevation of Printed Text:
When a thick, flat rectangular glass slab is placed over printed text on a sheet of paper, the letters appear distinctly raised toward the upper surface of the glass due to refraction at the glass-air boundary.
Refraction Through a Rectangular Glass Slab
Double Refraction Process:
When light traverses a rectangular glass slab, it undergoes refraction twice: first at the upper air-to-glass interface, and subsequently at the lower glass-to-air interface.
Experimental Procedure Using Optical Pins:
A sheet of white paper is secured to a drawing board or cardboard sheet, and a rectangular glass block is placed upon it to trace its perimeter outline.
The slab is removed, and a straight incident line is drawn inclined at an oblique angle to one of the longer edges; two pins, and , are inserted vertically along .
The glass slab is restored to its traced outline. Looking through the opposite long face of the slab, the observer moves their head until the images of and align in a straight visual sightline.
Two additional pins, and , are pinned into the paper such that they align with the perceived images of and .
The slab and pins are removed, pinpricks are marked, and a straight line is drawn connecting and .
Connecting point (entry point) to point (exit point) establishes the internal ray path through the glass block.
Normals are constructed at points and , and the angles of incidence and refraction are recorded.
Geometric Properties and Lateral Displacement:
At the first surface (air-to-glass), the ray bends toward the normal: angle of incidence is , angle of refraction is .
At the second surface (glass-to-air), the internal angle of incidence is and the angle of emergence is .
Geometrical analysis confirms that:
Because the angle of emergence () is identical to the initial angle of incidence (), the emergent ray () travels parallel to the original incident ray ().
While the emergent ray is parallel to the incident ray, it is displaced sideways from its original path by a perpendicular distance termed lateral shift (lateral displacement).
Refraction Through a Triangular Glass Prism
Structural Characteristics of a Prism:
A triangular prism is a transparent glass body having a uniform triangular cross-section bounded by two parallel triangular bases and three inclined rectangular faces.
The three rectangular faces function as the refracting surfaces.
The angle formed between two refracting rectangular faces is designated as the angle of the prism, denoted by .
Ray Tracing Through a Prism:
An outline of the triangular prism is traced onto paper.
An incident line is drawn at an angle to refracting face , and pins and are inserted along it.
Looking through the opposite face , two pins, and , are positioned in alignment with the images of and .
The prism and pins are removed, and a straight line is drawn through the positions of and .
The points of incidence on face and emergence on face are joined to delineate the internal ray path .
Normals are drawn at and .
The incident ray bends towards the normal upon entering the glass (), and bends away from the normal upon emerging into air ().
The net effect is that the ray bends toward the thicker base of the prism.
Angle of Deviation and Fundamental Prism Formula:
The straight lines (incident ray extended forward) and (emergent ray extended backward) are produced until they intersect at point .
The angle between the original direction of the incident ray and the emergent ray is defined as the angle of deviation, denoted by .
The angle of deviation quantifies the total angular deflection experienced by the light ray.
For any refraction through a triangular prism, the relationship connecting the angle of incidence (), angle of emergence (), angle of the prism (), and angle of deviation () is:
This relation holds universally for the refraction of light through a prism.
Atmospheric Refraction and Associated Natural Phenomena
Nature and Cause of Atmospheric Refraction:
Atmospheric refraction is defined as the bending of light as it passes through the Earth's atmosphere due to variations in the physical density and refractive index of air layers.
The atmosphere consists of numerous layers of air at varying temperatures and pressures, each possessing a different refractive index.
These atmospheric layers are dynamic: during daytime hours, solar radiation heats the ground, heating the adjacent air, lowering its density and refractive index; at night, terrestrial radiation cools the ground, cooling the adjacent air and increasing its optical density.

Advanced Sunrise and Delayed Sunset:
Solar rays travelling from outer space (vacuum) encounter Earth's atmosphere, entering an optically denser medium from an optically rarer medium.
The rays bend continuously towards the normal as they pass through progressively denser air layers.
At dawn, when the sun () is physically situated just below the astronomical horizon, the refracted rays bend around Earth's curvature to reach an observer's eye.
The observer perceives the sun along the tangent to the arriving ray, viewing an apparent sun position that lies above the horizon.
This enables the sun to be visible roughly prior to actual horizon crossing at sunrise.
At dusk, the same phenomenon keeps the sun visible for approximately after it has sunk below the horizon.
Consequently, the total duration of daylight is extended by approximately ().
Twinkling of Stars:
Light from distant stars passes through turbulent atmospheric layers of continuously shifting densities.
Continuous atmospheric disturbances alter the refractive index along the optical path, constantly changing the amount of bending and shifting the apparent position of the point-like star.
The intensity and perceived location of the incoming starlight fluctuate rapidly, creating the optical effect of twinkling.
Non-Twinkling of Celestial Bodies (Moon and Planets):
Planets and the Moon do not twinkle because they are much closer to Earth than distant stars.
Their greater proximity makes them appear as extended sources of light rather than mere point sources.
The human eye easily resolves and adjusts for minor positional fluctuations across an extended disk, so apparent shifts average out and the twinkling effect is not seen.
Dispersion of White Light and the Spectrum
Definition of Dispersion:
Sunlight, though appearing white, is composed of seven distinct constituent spectral colors.
Dispersion is defined as the phenomenon of splitting or separation of white light into its constituent colors upon passing through a refracting medium.
The Visible Spectrum and VIBGYOR Sequence:
The band of colors produced when white light undergoes dispersion is termed the spectrum of white light.
The colors appear in a strict order from most refracted to least refracted:
Violet ()
Indigo ()
Blue ()
Green ()
Yellow ()
Orange ()
Red ()
The sequence is remembered using the mnemonic acronym VIBGYOR.
Physical Cause of Dispersion:
Dispersion occurs because the refractive index of a transparent medium differs slightly for each color of light.
In glass, the refractive index is greater for violet light than for red light ().
Because violet light travels slower in glass than red light, violet light bends through the greatest angle of deviation, whereas red light bends through the smallest angle of deviation.
This angular separation causes the colors to diverge along different paths as they emerge from the refracting surface.
Condition for Observable Dispersion (Prism vs. Slab):
Dispersion requires that the separated color rays emerge in different directions (non-parallel paths).
In a triangular prism, the refracting surfaces are inclined at an angle , causing the separated rays to emerge divergent and form an observable colored band.
In a rectangular glass slab, the opposing faces are parallel; while dispersion occurs internally at the first boundary, the second parallel boundary reverses the angular divergence, causing all colored rays to emerge parallel to each other and recombine, preventing an observable spectrum.
Natural Occurrences and Laboratory Activities:
Rainbows: Formed naturally when solar white light undergoes combined refraction and internal reflection inside airborne water droplets.
Other Natural Displays: Colors of dispersion can be observed in thin soap bubbles, raindrops, and the spray of waterfalls or fountains.
Prism Activity: Directing a narrow beam of sunlight onto one face of a glass prism positioned near a wall projects an extended colored spectrum onto the wall.
Water and Mirror Activity: Placing a plane mirror at an incline inside a shallow vessel partially filled with water and illuminating the submerged portion with a torch or direct sunlight projects a spectrum onto an adjacent wall or ceiling.
Geometry and Terminology of Spherical Mirrors
Plane Mirror Review:
Plane mirrors form images that are virtual, erect, identical in size to the object, situated at an equal distance behind the reflecting surface as the object is in front, and laterally inverted.
Introduction to Curved Reflecting Surfaces:
An ordinary stainless steel spoon demonstrates the fundamental behavior of curved reflectors:
The outward-curving convex side produces an erect, diminished image.
The inward-curving concave side produces an inverted image when held at a standard distance.
Classification of Spherical Mirrors:
Spherical mirrors are mirrors whose reflecting surfaces are sections cut from a hollow sphere.
Convex Mirror: A spherical mirror whose reflecting surface bulges outwards away from the center of curvature.
Concave Mirror: A spherical mirror whose reflecting surface curves inwards toward the center of curvature (the hollow side is polished and reflective).
Standard Geometric Parameters of Spherical Mirrors:
Pole (): The geometric center of the reflecting surface of the mirror.
Centre of Curvature (): The center point of the imaginary hollow sphere of which the spherical mirror forms a part.
Radius of Curvature (): The linear radius of the imaginary hollow sphere of which the mirror forms a part; corresponds to distance .
Principal Axis: The straight line passing through the pole () and the center of curvature (), extending indefinitely in both directions.
Focus or Principal Focus (): The point on the principal axis where rays initially parallel to the principal axis either converge after reflection (concave mirror) or appear to diverge from after reflection (convex mirror).
Focal Length (): The distance measured along the principal axis between the pole () and the focus ().
Relationship Between Focal Length and Radius of Curvature: The principal focus lies midway between the pole and the center of curvature:
Rules for Tracing Reflection in Spherical Mirrors
Rule 1 (Incidence at the Pole):
A ray of light directed at the pole () reflects symmetrically across the principal axis in accordance with the laws of reflection.
The angle formed between the incident ray and the principal axis equals the angle formed between the reflected ray and the principal axis.
This behavior applies identically to both concave and convex mirrors.
Rule 2 (Rays Through or Toward the Centre of Curvature):
A ray passing through the center of curvature () of a concave mirror, or directed toward the center of curvature () of a convex mirror, strikes the mirror normal to the spherical surface.
Consequently, the ray reflects back along its original path, retracing its trajectory in the opposite direction along the same straight line.
Rule 3 (Rays Parallel to the Principal Axis):
A ray travelling parallel to the principal axis reflects through the principal focus () of a concave mirror.
In a convex mirror, a ray parallel to the principal axis reflects along a path that appears to diverge directly from the principal focus () behind the mirror.
Rule 4 (Rays Directed Through or Toward the Focus):
A ray passing through the principal focus () of a concave mirror emerges parallel to the principal axis after reflection.
A ray directed toward the principal focus () of a convex mirror reflects parallel to the principal axis.
Image Nature Criteria:
Real Image: Formed when two reflected rays physically intersect at a common point (); can be captured on a screen and is always inverted.
Virtual Image: Formed when reflected rays diverge and must be projected backwards behind the mirror to find their intersection point (); cannot be captured on a screen and is always erect.
Image Formation, Ray Tracing, and Applications of Concave Mirrors
Summary of Object Positions and Resulting Images:
Object at Infinity:
Image Position: Formed at the principal focus ().
Image Nature and Size: Real, inverted, and extremely diminished (point-sized).
Application: Solar concentrators and solar heaters place their absorption targets at the focus to collect and concentrate incoming parallel solar rays.
Object Beyond the Centre of Curvature ():
Image Position: Formed between the focus () and center of curvature ().
Image Nature and Size: Real, inverted, and diminished (smaller than the object).
Object at the Centre of Curvature ():
Image Position: Formed at the center of curvature ().
Image Nature and Size: Real, inverted, and identical in size to the object.
Object Between the Centre of Curvature () and Focus ():
Image Position: Formed beyond the center of curvature ().
Image Nature and Size: Real, inverted, and magnified (larger than the object).
Object at the Principal Focus ():
Image Position: Formed at infinity; reflected rays emerge strictly parallel to one another.
Application: Searchlights, torches, and vehicle headlamps place the filament bulb at the focal point of a concave reflector to produce an intense, non-diverging parallel light beam.
Object Between the Focus () and Pole ():
Image Position: Formed behind the reflecting surface of the mirror.
Image Nature and Size: Virtual, erect, and magnified.
Application: Used as shaving mirrors, makeup mirrors, and dental examination mirrors; holding the mirror close to the face positions the skin inside the focal length, producing an enlarged, upright image for inspecting fine detail.
Summary Table of Images Formed by a Concave Mirror:
Object at infinity: Image at ; Real, inverted, point-sized
Object beyond : Image between and ; Real, inverted, smaller
Object at : Image at ; Real, inverted, same size
Object between and : Image beyond ; Real, inverted, larger
Object at : Image at infinity; Parallel reflected rays
Object between and : Image behind mirror; Virtual, erect, larger
Image Formation, Ray Tracing, and Applications of Convex Mirrors
Nature of Images Formed by a Convex Mirror:
Regardless of where an object is placed along the principal axis in front of a convex mirror, the image formed is always virtual, erect, and diminished (smaller than the object).
The virtual image is always located behind the mirror between the pole () and focus ().
Practical Applications:
Rear-View Mirrors in Vehicles: Convex mirrors are used as rear-view and side-view driving mirrors in automobiles.
Field of View Advantage: Because a convex mirror forms diminished images, it captures a substantially wider field of view than an equivalent flat plane mirror, allowing drivers to monitor a much broader expanse of following traffic.