Comprehensive Study Guide to Hydrogen, Hydrides, Water, and Hydrogen Peroxide
Position of Hydrogen in the Periodic Table
Electronic Configuration and Dual Resemblance:
Hydrogen possesses the electronic configuration of 1s1.
Resemblance to Alkali Metals (Group 1):
Features an outer electronic configuration similar to the ns1 configuration of alkali metals.
Readily loses one electron to form uni-positive ions (H+).
Forms compounds analogous to alkali metal compounds, including oxides, halides, and sulphides.
Resemblance to Halogens (Group 17):
Short by one electron from achieving the stable noble gas configuration of helium (1s2), analogous to halogens which possess an ns2np5 configuration.
Forms a uni-negative ion (H−) by gaining one electron.
Forms a diatomic molecule (H2), hydrides, and numerous covalent compounds.
Significant Differences from Groups 1 and 17:
Nuclear Size of Proton:
Loss of the valence electron leaves a bare nucleus (H+) with an extremely small size of approximately 1.5×10−3pm.
Consequently, H+ does not exist freely in the isolated state and remains perpetually associated with other atoms or molecules.
Ionization Enthalpy Comparison:
Hydrogen possesses an exceptionally high ionization enthalpy (ΔiH=1312kJmol−1), meaning it lacks metallic characteristics under standard conditions.
Ionization enthalpy of lithium (Li): 520kJmol−1.
Ionization enthalpy of fluorine (F): 1680kJmol−1.
The ionization enthalpy of hydrogen resembles halogens far more closely than alkali metals.
Chemical Reactivity:
The chemical reactivity of dihydrogen is significantly lower than that of halogens.
Placement in the Periodic Table:
Owing to its unique dual characteristics and distinct deviations, hydrogen is positioned separately in the periodic table.
Isotopes of Hydrogen
Identification and Nuclear Composition:
Hydrogen exists in three isotopic forms differing in neutron count:
Protium (1H): Ordinary hydrogen containing 1 proton and 0 neutrons in the nucleus; represents the predominant form.
Deuterium (2H or D): Known as heavy hydrogen; contains 1 proton and 1 neutron in the nucleus.
Tritium (3H or T): Contains 1 proton and 2 neutrons in the nucleus.
Terrestrial Abundance and Radioactivity:
Deuterium comprises 0.0156% of terrestrial hydrogen, occurring predominantly in the form of HD.
Tritium occurs in trace quantities, roughly 1 atom per 1018 atoms of protium.
Tritium is the only radioactive isotope of hydrogen; it decays via low-energy β− particle emission with a half-life of t1/2=12.33years.
Chemical and Physical Variations:
Due to having identical electronic configurations, the isotopes exhibit virtually identical chemical properties.
Differences arise in their rates of reaction, primarily caused by differences in bond dissociation enthalpy.
Comprehensive Comparative Physical Properties of Hydrogen Isotopes:
Relative abundance (%):
Hydrogen (1H): 99.985%
Deuterium (2H): 0.0156%
Tritium (3H): 10−15%
Relative atomic mass (gmol−1):
Hydrogen (1H): 1.008gmol−1
Deuterium (2H): 2.014gmol−1
Tritium (3H): 3.016gmol−1
Melting point (K):
Hydrogen (1H): 13.96K
Deuterium (2H): 18.73K
Tritium (3H): 20.62K
Boiling point (K):
Hydrogen (1H): 20.39K
Deuterium (2H): 23.67K
Tritium (3H): 25.0K
Density (gL−1):
Hydrogen (1H): 0.09gL−1
Deuterium (2H): 0.18gL−1
Tritium (3H): 0.27gL−1
Enthalpy of fusion (kJmol−1):
Hydrogen (1H): 0.117kJmol−1
Deuterium (2H): 0.197kJmol−1
Tritium (3H): Not reported
Enthalpy of vaporization (kJmol−1):
Hydrogen (1H): 0.904kJmol−1
Deuterium (2H): 1.226kJmol−1
Tritium (3H): Not reported
Enthalpy of bond dissociation at 298.2K (kJmol−1):
Hydrogen (1H): 435.88kJmol−1
Deuterium (2H): 443.35kJmol−1
Tritium (3H): Not reported
Internuclear distance (pm):
Hydrogen (1H): 74.14pm
Deuterium (2H): 74.14pm
Tritium (3H): Not reported
Ionization enthalpy (kJmol−1):
Hydrogen (1H): 1312kJmol−1
Electron gain enthalpy (kJmol−1):
Hydrogen (1H): −73kJmol−1
Radii (pm):
Covalent radius of hydrogen: 37pm
Ionic radius (H−): 208pm
Preparation of Dihydrogen
Laboratory Preparation Methods:
Granulated Zinc with Acid:
Reaction of granulated zinc with dilute hydrochloric acid:
Zn+2H+→Zn2++H2
Granulated Zinc with Aqueous Alkali:
Reaction of zinc with aqueous sodium hydroxide yields sodium zincate and dihydrogen:
Zn+2NaOH→Na2ZnO2+H2
Commercial Production Processes:
Platinum Electrode Electrolysis of Acidified Water:
Electrolysis of water acidified with traces of acid or base using platinum electrodes yields high-purity dihydrogen, though the process is expensive:
2H2O(l)Electrolysis / traces of acid/base2H2(g)+O2(g)
Chlor-Alkali Byproduct Production:
Obtained during the manufacture of sodium hydroxide (NaOH) and chlorine (Cl2) by the electrolysis of brine solution:
Anodic reaction:
2Cl−(aq)→Cl2(g)+2e−
Cathodic reaction:
2H2O(l)+2e−→H2(g)+2OH−(aq)
Net electrolytic process:
2Na+(aq)+2Cl−(aq)+2H2O(l)→Cl2(g)+H2(g)+2Na+(aq)+2OH−(aq)
Hydrocarbon Steam Reforming and Coal Gasification:
Reaction of steam on hydrocarbons or coke at high temperatures with nickel catalyst produces syngas:
CnH2n+2+nH2O1270KNinCO+(2n+1)H2
Specific reaction with methane:
CH4(g)+H2O(g)1270KNiCO(g)+3H2(g)
Water Gas / Synthesis Gas (Syngas):
An equimolar mixture of CO and H2 is termed water gas or synthesis gas ('syngas') as it serves as a feedstock in the industrial synthesis of methanol and multiple hydrocarbons.
Syngas can be synthesized from sewage, sawdust, scrap wood, and newspapers.
Coal Gasification:
The production of syngas from coal at elevated temperatures:
C(s)+H2O(g)1270KCO(g)+H2(g)
Water-Gas Shift Reaction and Separation:
Pure dihydrogen is difficult to separate from CO due to low condensation differentials, although CO can be liquefied at low temperatures under pressure.
The gas mixture can be mixed with steam, cooled to 400∘C, and passed over iron oxide to convert CO to CO2:
CO(g)+H2O(g)FeCO2(g)+H2(g)
Methods for removing CO2 from the product gas stream:
Dissolving the gas mixture in water under high pressure.
Reacting the mixture with potassium carbonate (K2CO3) solution to form potassium hydrogen carbonate (KHCO3).
Scrubbing the gas mixture with sodium arsenite solution.
Properties and Applications of Dihydrogen
Physical Properties:
Dihydrogen is a colorless, odorless, tasteless, and combustible gas.
It is lighter than air and insoluble in water.
Chemical Properties:
The chemical behavior is governed by its exceptionally large H−H single bond dissociation enthalpy (435.88kJmol−1), the highest for any single bond between two identical atoms.
Thermal dissociation into atomic hydrogen is minimal at moderate temperatures: approximately 0.081% at 2000K, rising to 95.5% at 5000K.
Dihydrogen remains relatively unreactive at room temperature.
Chemical Reactions of Dihydrogen:
Halogens:
Reacts with halogens (X2) to form hydrogen halides:
H2(g)+X2(g)→2HX(g)
Reaction with fluorine occurs in the dark, whereas reaction with iodine requires a catalyst.
Dioxygen:
Reacts exothermically with dioxygen in the presence of heat or catalysts:
2H2(g)+O2(g)catalyst or heating2H2O(l)ΔH=−285.9kJmol−1
Dinitrogen (Haber\'s Process):
Synthesizes ammonia under high temperature and pressure:
3H2(g)+N2(g)673K,200atmFe2NH3(g)ΔH=−92.6kJmol−1
Alkali Metals:
Combines directly with alkali metals at elevated temperatures to yield ionic hydrides:
H2(g)+2M(g)→2MH(s)
Metal Ions and Oxides:
Reduces aqueous metal ions and oxides of metals less active than iron into their free metals:
H2(g)+Pd2+(aq)→Pd(s)+2H+(aq)yH2(g)+MxOy(s)→xM(s)+yH2O(l)
Organic Compounds:
Catalytic Hydrogenation of Vegetable Oils:
Hydrogenation of polyunsaturated vegetable oils (such as soyabean and cottonseed oil) using a nickel catalyst produces edible solid fats (vanaspati ghee and margarine).
Hydroformylation of Olefins:
Olefins react with syngas to form aldehydes, which subsequently reduce to alcohols:
H2+CO+RCH=CH2→RCH2CH2CHOH2+RCH2CH2CHO→RCH2CH2CH2OH
Commercial and Industrial Uses:
Synthesis of ammonia for nitrogenous fertilizers and nitric acid manufacture.
Manufacture of bulk organic chemicals, including methanol:
CO(g)+2H2(g)cobalt catalystCH3OH(l)
Industrial production of metal hydrides.
Used as rocket fuel in space research.
Generation of electrical power in fuel cells, offering high energy density per unit mass compared to gasoline without generating chemical pollutants.
Hydrides
Definition and Categorization:
Binary compounds composed of hydrogen and other chemical elements are designated as hydrides.
Categorized into three distinct groups based on electronegativity, bonding, and structural configuration:
Ionic or salt-like hydrides.
Covalent or molecular hydrides.
Metallic or interstitial hydrides.
Ionic (Salt-like / Saline) Hydrides:
Formed by elements of low electronegativity, specifically s-block alkali and alkaline earth metals, as well as highly electropositive lanthanides.
Beryllium hydride (BeH2) and magnesium hydride (MgH2) deviate from ionic character and possess polymeric, covalent structures.
Thermal Stability Trends:
Hydride stability decreases as the ionic radius of the metal cation increases:
LiH>NaH>KH>RbH>CsHCaH2>SrH2>BaH2
Calcium hydride (CaH2) is known as hydrolith.
Properties and Reactions:
Stoichiometric, crystalline, non-volatile, and non-conducting in the solid state.
Molten salts conduct electricity, liberating dihydrogen gas at the anode, confirming the existence of H− ions:
2H−(melt)anodeH2(g)+2e−
React vigorously and violently with water to liberate dihydrogen:
NaH(s)+H2O(aq)→NaOH(aq)+H2(g)
Lithium hydride (LiH) is unreactive toward O2 and Cl2 at moderate temperatures and serves as a synthetic precursor for complex hydrides:
8LiH+Al2Cl6→2LiAlH4+6LiCl2LiH+B2H6→2LiBH4
Covalent or Molecular Hydrides:
Formed by true non-metals (excluding group 0 noble gases) and weakly electropositive metallic/metalloid elements such as Al, Ga, Sn, Pb, Sb, Bi, and Po.
Structural Forms:
Boron and gallium form dimeric structures: diborane (B2H6) and digallane (Ga2H6).
Aluminium forms a polymeric hydride: (AlH3)n.
Classification by Valence Electron Distribution:
Electron-deficient Hydrides:
Possess fewer valence electrons than required to write standard Lewis structures.
Characteristic of Group 13 elements (e.g., B2H6).
Function chemically as Lewis acids (electron pair acceptors).
Electron-precise Hydrides:
Contain the exact number of electrons needed for conventional Lewis bonds.
Characteristic of Group 14 elements (e.g., CH4).
Exhibit tetrahedral geometry without non-bonding pairs.
Electron-rich Hydrides:
Possess excess valence electrons present as non-bonding lone pairs on the central atom.
Characteristic of Group 15, 16, and 17 elements (NH3 has 1 lone pair, H2O has 2, and HF has 3).
Function chemically as Lewis bases (electron pair donors).
Presence of lone pairs on highly electronegative atoms (N, O, F) induces strong intermolecular hydrogen bonding, leading to elevated boiling points relative to subsequent period hydrides.
Metallic or Interstitial Hydrides:
Formed by transition metals (d-block) and inner-transition metals (f-block) via absorption of hydrogen into interstitial lattice sites at elevated temperatures.
Almost always non-stoichiometric with variable composition depending on temperature and pressure.
Examples include: TiH1.73, CeH2.7, LaH2.87, PdH0.6, and ZrH1.92.
Properties:
Possess metallic luster, electrical conductivity, and physical characteristics resembling the parent metals.
Retain powerful reducing properties attributed to isolated hydrogen atoms inside the metal lattice.
With the exception of Ni, Pd, Ce, and Ac, metallic hydrides possess crystal lattices distinct from their parent metals.
Transition metals capable of absorbing large volumes of hydrogen (such as Pd and Pt) function as hydrogen storage media and catalytic hydrogenation platforms.
Structure and Properties of Water
Molecular Structure and Condensed States:
Gas Phase Water:
Features a bent geometry with a bond angle of 104.5∘ and an O−H bond length of 95.7pm.
Highly polar molecule exhibiting a high dipole moment.
Liquid and Solid Association:
Molecules are held in dense networks through intermolecular hydrogen bonding.
In ice, every oxygen atom is tetrahedrally coordinated to four adjacent oxygen atoms at an internuclear distance of 276pm.
Ice forms an open, cage-like structure containing wide holes that can trap molecules of appropriate sizes interstitially.
At atmospheric pressure, ice crystallizes in a hexagonal lattice; at very low temperatures, it condenses into a cubic form.
Because the density of ice is lower than that of liquid water, ice floats, creating a surface layer of thermal insulation that protects aquatic life in cold climates.
Anomalous Physical Constants of Water:
Extensive hydrogen bonding results in anomalously high values for freezing point, boiling point, heat of vaporization, and heat of fusion compared to H2S and H2Se.
Possesses exceptionally high values for specific heat, thermal conductivity, surface tension, dipole moment, and dielectric constant relative to other liquids.
Serves as an effective solvent for biological transport, dissolving polar covalent biomolecules like carbohydrates and alcohols via hydrogen bonding.
Comparative Physical Constants: H2O vs. Heavy Water (D2O):
Molecular mass (gmol−1):
H2O: 18.0151gmol−1
D2O: 20.0276gmol−1
Melting point (K):
H2O: 273.0K
D2O: 276.8K
Boiling point (K):
H2O: 373.0K
D2O: 374.4K
Enthalpy of formation (kJmol−1):
H2O: −285.9kJmol−1
D2O: −294.6kJmol−1
Enthalpy of vaporization at 373K (kJmol−1):
H2O: 40.66kJmol−1
D2O: 41.61kJmol−1
Enthalpy of fusion (kJmol−1):
H2O: 6.01kJmol−1
D2O: Not reported
Temperature of maximum density (K):
H2O: 276.98K
D2O: 284.2K
Density at 298K (gcm−3):
H2O: 1.0000gcm−3
D2O: 1.1059gcm−3
Viscosity (centipoise):
H2O: 0.8903centipoise
D2O: 1.107centipoise
Dielectric constant (C2N−1m−2):
H2O: 78.39
D2O: 78.06
Electrical conductivity at 293K (Ω−1cm−1):
H2O: 5.7×10−8Ω−1cm−1
D2O: Not reported
Chemical Properties of Water:
Amphoteric Nature:
Functions as a Brønsted-Lowry acid in the presence of NH3:
H2O(l)+NH3(aq)⇌OH−(aq)+NH4+(aq)
Functions as a Brønsted-Lowry base in the presence of H2S:
H2O(l)+H2S(aq)⇌H3O+(aq)+HS−(aq)
Readily reduced to dihydrogen by electropositive metals:
2H2O(l)+2Na(s)→2NaOH(aq)+H2(g)
Oxidized to dioxygen during biological photosynthesis:
6CO2(g)+12H2O(l)→C6H12O6(aq)+6H2O(l)+6O2(g)
Oxidized by elemental fluorine:
2F2(g)+2H2O(l)→4H+(aq)+4F−(aq)+O2(g)
Hydrolysis Reactions:
High dielectric constant facilitates extensive hydration and hydrolysis of covalent and ionic compounds:
P4O10(s)+6H2O(l)→4H3PO4(aq)SiCl4(l)+2H2O(l)→SiO2(s)+4HCl(aq)N3−(s)+3H2O(l)→NH3(g)+3OH−(aq)
Hydrate Formation:
Coordinated water: e.g., [Cr(H2O)6]3+3Cl−
Interstitial water: e.g., BaCl2⋅2H2O
Hydrogen-bonded water: e.g., [Cu(H2O)4]2+SO42−⋅H2O in copper(II) sulphate pentahydrate (CuSO4⋅5H2O), where four water molecules coordinate directly to the copper cation and one water molecule is hydrogen-bonded to sulphate.
Hardness of Water and Softening Techniques
Origin and Manifestation of Hardness:
Rainwater flowing over mineral deposits dissolves divalent metal salts.
Hardness is caused specifically by soluble salts of calcium (Ca2+) and magnesium (Mg2+) in the form of hydrogencarbonates, chlorides, and sulphates.
Hard water precipitates soap, failing to produce lather.
Precipitates insoluble calcium and magnesium stearate scums when reacted with sodium stearate (C17H35COONa):
2RCOONa(aq)+M2+(aq)→(RCOO)2M↓+2Na+(aq)2C17H35COONa(aq)+Ca2+(aq)→(C17H35COO)2Ca↓+2Na+(aq)
Temporary Hardness:
Caused by dissolved calcium hydrogencarbonate [Ca(HCO3)2] and magnesium hydrogencarbonate [Mg(HCO3)2].
Removal Methods:
Boiling:
Converts soluble hydrogencarbonates to insoluble carbonates or hydroxides:
Mg(HCO3)2HeatingMg(OH)2↓+2CO2↑Ca(HCO3)2HeatingCaCO3↓+H2O+CO2↑
Note that magnesium precipitates as its hydroxide (Mg(OH)2) rather than its carbonate due to lower solubility product.
Clark\'s Method:
Involves the addition of a calculated stoichiometric quantity of slaked lime [Ca(OH)2]:
Ca(HCO3)2+Ca(OH)2→2CaCO3↓+2H2OMg(HCO3)2+2Ca(OH)2→2CaCO3↓+Mg(OH)2↓+2H2O
Addition of Washing Soda (Na2CO3):
Ca(HCO3)2+Na2CO3→CaCO3↓+2NaHCO3
Permanent Hardness:
Caused by soluble chlorides and sulphates of calcium and magnesium (CaCl2, MgCl2, CaSO4, MgSO4).
Cannot be removed by boiling.
Removal Methods:
Washing Soda Treatment:
Soluble salts are precipitated as insoluble carbonates:
MCl2+Na2CO3→MCO3↓+2NaClMSO4+Na2CO3→MCO3↓+Na2SO4
Where M=Mg,Ca.
Calgon\'s Method:
Involves sodium hexametaphosphate (Na6P6O18), commercially called Calgon or Graham\'s salt:
Na6P6O18→2Na++[Na4P6O18]2−M2++[Na4P6O18]2−→[Na2MP6O18]2−+2Na+
The divalent cations (Ca2+, Mg2+) are sequestered inside a stable soluble complex anion.
Ion-Exchange (Zeolite / Permutit Process):
Employs hydrated sodium aluminium silicate (NaAlSiO4), abbreviated as NaZ:
2NaZ(s)+M2+(aq)→MZ2(s)+2Na+(aq)
When exhausted, the zeolite bed is regenerated by washing with an aqueous sodium chloride (NaCl) solution:
MZ2(s)+2NaCl(aq)→2NaZ(s)+MCl2(aq)
Synthetic Resins Method:
Generates high-purity deionised water through dual-column ion exchange:
Exchanges OH− for anions like Cl−, HCO3−, and SO42−.
Released H+ and OH− combine to form pure water (H2O).
Regeneration:
The cation column is regenerated with dilute H2SO4.
The anion column is regenerated with aqueous Na2CO3 or NaOH.
Heavy Water (D2O):
Manufactured via exhaustive electrolysis of water or isolated as a byproduct in fertilizer plants.
Used as a neutron moderator in nuclear fission reactors and as an isotopic tracer to elucidate reaction mechanisms.
Chemical exchange reactions of D2O:
CaC2+2D2O→C2D2+Ca(OD)2SO3+D2O→D2SO4Al4C3+12D2O→3CD4+4Al(OD)3
Degree of Hardness Calculations
Definitions and Formulae:
Hardness is quantified as equivalent parts per million (ppm) of calcium carbonate (CaCO3) per 106 parts of water by mass:
Concentration in ppm=Volume of solution (mL)Mass of solute (g)×106Degree of Hardness=Mass of waterMass of CaCO3×106ppm
Equivalent Weight Relationships:
Equivalent weight of CaCO3: ECaCO3=2100=50geq−1.
Equivalent weight of CaCl2: ECaCl2=2111=55.5geq−1.
Equivalent weight of MgCl2: EMgCl2=295=47.5geq−1.
Equivalence conversion: 55.5gCaCl2≡50gCaCO3.
Fully Worked Quantitative Illustrations:
Illustration: Hardness from 111ppm of CaCl2:
Given 55.5gCaCl2=50gCaCO3.
For 111.0gCaCl2:
Mass of CaCO3=111.0×(55.550)=100gCaCO3
Thus, 111ppmCaCl2=100ppm equivalent of CaCO3.
Illustration: Calculation of CaO required to remove hardness from 106L of water containing 1.62gL−1 of Ca(HCO3)2:
Reaction:
CaO+Ca(HCO3)2→2CaCO3+H2O
Stoichiometric relationship:
1mol of Ca(HCO3)2≡1mol of CaO
Molar mass of Ca(HCO3)2=162gmol−1.
Moles of Ca(HCO3)2 per liter:
Moles=162gmol−11.62g=0.01molL−1
Moles of CaO required per liter: 0.01mol.
Total moles of CaO for 106L:
Moles of CaO=0.01×106=104mol
Mass of CaO (Mr=56gmol−1):
Mass of CaO=104mol×56gmol−1=5.6×105g
Illustration: Calcium Ion Concentration from Anion Concentrations:
A sample contains 96.0ppm of SO42− and 122.0ppm of HCO3−, with Ca2+ as the sole cation.
Total equivalent mass of CaCO3 per liter:
Total CaCO3=0.90mg+1.05mg=1.95mg
Hardness in ppm:
Hardness=1000g1.95×10−3g×106=1.95ppm
Illustration: Minimum CaO Mass to Treat 1kg Water with 244ppmHCO3−:
Concentration:
244ppm=244mgHCO3−per kg (or L)
Moles of HCO3−:
Millimoles of HCO3−=61mgmmol−1244mg=4mmol
Equivalent millimoles of Ca(HCO3)2:
Millimoles of Ca(HCO3)2=24=2mmol
Stoichiometry requires 1molCaO per mole of Ca(HCO3)2:
Millimoles of CaO=2mmolMass of CaO=2mmol×56mgmmol−1=112mgCaO
Illustration: Degree of Hardness via Carbonate Back-Titration:
250mL of hard water treated with 100mL of 0.1NNa2CO3, and residual Na2CO3 titrated with 40mL of 0.1NHCl:
meq of Na2CO3 added=100×0.1=10meqmeq of HCl consumed=40×0.1=4meqmeq of CaCO3 precipitated=10−4=6meq
Since the n-factor of CaCO3 is 2:
Millimoles of CaCO3=26=3mmolMass of CaCO3=3×10−3mol×100gmol−1=0.3g
Density of water assumed 1gmL−1 (sample mass=250g):
Degree of Hardness=250g0.3g×106ppm=1.2×103ppm
Dihydrogen as a Fuel and the Hydrogen Economy
Combustion Energy Comparison:
Dihydrogen releases large quantities of heat upon combustion, outperforming conventional hydrocarbon fuels on a per-mass basis.
Enthalpy released during combustion of various chemical fuels:
Dihydrogen (gaseous):
Energy per mole: 286kJmol−1
Energy per gram: 143kJg−1
Energy per liter: 12kJL−1
Dihydrogen (liquid):
Energy per mole: 285kJmol−1
Energy per gram: 142kJg−1
Energy per liter: 9968kJL−1
Liquefied Petroleum Gas (LPG):
Energy per mole: 2220kJmol−1
Energy per gram: 50kJg−1
Energy per liter: 25590kJL−1
Methane (CH4 gas):
Energy per mole: 880kJmol−1
Energy per gram: 53kJg−1
Energy per liter: 35kJL−1
Octane (liquid state):
Energy per mole: 5511kJmol−1
Energy per gram: 47kJg−1
Energy per liter: 34005kJL−1
On a mass basis, dihydrogen yields approximately three times more energy than petrol.
Environmental Considerations:
Dihydrogen combustion produces clean emissions, with water as the primary exhaust product.
Traces of nitrogen oxides (NOx) form due to dinitrogen impurities at high flame temperatures.
NOx formation can be suppressed by injecting a fine spray of water into the combustion cylinder to moderate operating temperatures.
Practical and Logistical Constraints:
A pressurized compressed gas tank of dihydrogen weighs approximately 30 times more than a petrol tank containing the equivalent energy payload.
Liquefaction requires refrigeration down to 20K, necessitating heavily insulated cryogenic tanks.
Metal alloy hydride matrices such as NaNi5, Ti-TiH2, and Mg-MgH2 are utilized for small-scale solid-state storage.
The Hydrogen Economy:
The core paradigm is the collection, distribution, and storage of energy in the form of liquid or gaseous dihydrogen rather than electrical current.
In October 2005, India launched an automotive pilot project utilizing an initial blend of 5% dihydrogen in Compressed Natural Gas (CNG).
Hydrogen Peroxide (H2O2)
Industrial and Laboratory Preparation:
Acidification of Barium Peroxide:
Barium peroxide octahydrate is acidified with cold sulphuric acid, with water removed by reduced-pressure evaporation:
BaO2⋅8H2O(s)+H2SO4(aq)→BaSO4(s)+H2O2(aq)+8H2O(l)
Peroxodisulphate Electrolytic Route:
Acidified sulphate solutions subjected to high current density yield peroxodisulphate, which hydrolyses to H2O2:
2HSO4−(aq)ElectrolysisHO3SOOSO3H(aq)HO3SOOSO3H(aq)Hydrolysis2HSO4−(aq)+2H+(aq)+H2O2(aq)
Used for laboratory preparation of deuterium peroxide (D2O2):
K2S2O8(s)+2D2O(l)→2KDSO4(aq)+D2O2(l)
Auto-oxidation of 2-Alkylanthraquinols:
Industrial cycle involving catalytic hydrogenation and aerobic oxidation:
2-ethylanthraquinolO2(air)H2/PdH2O2+(oxidised product)
Produces a 1% aqueous solution of H2O2, which is concentrated to ∼30% by mass via vacuum distillation.
Further concentrated to ∼85% under low pressure, after which residual water is frozen out to yield pure anhydrous H2O2.
Physical Properties:
Pure H2O2 is a pale blue, nearly colorless, viscous liquid.
Completely miscible with water in all proportions, forming a stable crystalline hydrate: H2O2⋅H2O (melting point 221K).
Physical Constants of Pure Hydrogen Peroxide:
Melting point: 272.4K
Boiling point (extrapolated): 423K
Vapor pressure at 298K: 1.9mmHg
Liquid density at 298K: 1.44gcm−3
Solid density at 268.5K: 1.64gcm−3
Viscosity at 298K: 1.25centipoise
Dielectric constant at 298K: 70.7C2N−1m−2
Electrical conductivity at 298K: 5.1×10−8Ω−1cm−1
Volume Strength Concentrations:
\'100\text{ volume}\' H2O2 refers to a solution where 1mL of the liquid produces 100mL of O2 gas at STP, corresponding to a 30% mass concentration.
Commercial antiseptic \'10\text{ volume}\' H2O2 produces 10mL of O2 per mL of solution at STP, corresponding to a 3% mass concentration.
Stereochemistry and Molecular Structure:
Non-planar "open-book" configuration with distinct parameters between phases:
Gas Phase Geometry:
O−H bond distance: 95.0pm
O−O bond distance: 147.5pm
O−O−H bond angle: 94.8∘
Dihedral (torsional) angle: 111.5∘
Solid Phase Geometry (measured at 110K):
O−H bond distance: 98.8pm
O−O bond distance: 145.8pm
O−O−H bond angle: 101.9∘
Dihedral (torsional) angle: 90.2∘
Chemical Properties and Redox Activity:
Functions as both an oxidizing and reducing agent in both acidic and basic solutions.
Spontaneously decomposes via light exposure and contact with catalytic surfaces:
2H2O2(l)→2H2O(l)+O2(g)
Decomposition is accelerated by trace alkalis leached from glass surfaces and by particulate dust.
Stored in dark, wax-lined glass or plastic containers with added stabilizers such as urea.
Applications:
Dilute solutions serve as mild hair bleaches and disinfectants; sold as an antiseptic under the name perhydrol.
Synthesis of industrial per-compounds, including sodium perborate and sodium percarbonate for high-grade detergents.
Organic synthesis of pharmaceuticals (e.g., cephalosporin), tartaric acid, and hydroquinone.
Industrial bleaching of delicate materials: textiles, wood pulp, paper, leather, oils, and fats.
Environmental effluent remediation: treatment of municipal and industrial wastewater, oxidative destruction of toxic cyanides, and restoration of aerobic conditions in sewage systems.
Academic Illustrations and Exercises
Illustration: Elementary Reactions of Dihydrogen:
Reaction with Chlorine:
Dihydrogen reduces elemental chlorine to chloride (Cl−) and is oxidized to H+, forming covalent hydrogen chloride (HCl).
Reaction with Sodium:
Dihydrogen is reduced by electropositive sodium to form sodium hydride (Na+H−), transferring an electron from Na to H to create an ionic lattice.
Reaction with Copper(II) Oxide:
Dihydrogen reduces CuO to elemental metallic copper (Cu0), oxidizing itself to covalent water (H2O).
Illustration: Hydride Boiling Points of Groups 15, 16, and 17 Elements:
Despite having lower molecular masses than their heavier group congeners, NH3, H2O, and HF have higher boiling points due to strong intermolecular hydrogen bonding arising from the high electronegativity and compact sizes of nitrogen, oxygen, and fluorine.
Illustration: Non-existence of Phosphorus Pentahydride (PH5):
Although phosphorus exhibits +3 and +5 oxidation states, it cannot form PH5.
The formation of PH5 is prevented by the high bond dissociation enthalpy of dihydrogen (high ΔH) combined with the insufficient electron gain enthalpy of hydrogen, which cannot stabilize phosphorus in its highest theoretical hydridic oxidation state.
Illustration: Coordinated vs. Hydrogen-Bonded Water in Copper Sulphate Pentahydrate:
In CuSO4⋅5H2O, four water molecules are coordinated to the central copper cation within the coordination sphere ([Cu(H2O)4]2+), while only one water molecule sits outside the coordination sphere and participates strictly in hydrogen bonding to the sulphate anion.
Illustration: Volumetric Strength Derivation of 10\text{ Volume}\' H2O2:
By definition, 1L of \'10\text{ volume}\' H2O2 generates 10L of O2 gas at STP.
Stoichiometry of decomposition:
2H2O2(l)→2H2O(l)+O2(g)
2moles of H2O2=2×34g=68g
Molar gas volume of O2 at STP: 22.7L
Mass of H2O2 required to yield 10L of O2:
Mass=22.7L68g×10L≈29.9g≈30gH2O2
Strength = 30gL−1, which corresponds to a 3% mass solution.
Illustration: Coal Gasification and Water-Gas Shift Enhancements:
High-temperature steam reaction on coal yields syngas:
C(s)+H2O(g)1270KCO(g)+H2(g)
Hydrogen yield is increased via the water-gas shift reaction by adding steam and passing over an iron oxide catalyst at 400∘C:
CO(g)+H2O(g)FeCO2(g)+H2(g)
Dihydrogen reacts with carbon monoxide over a cobalt catalyst to yield methanol:
CO(g)+2H2(g)cobalt catalystCH3OH(l)
Illustration: Structural Formula of Zeolite/Permutit:
The chemical formula of sodium zeolite (permutit) is NaAlSiO4.
Illustration: Heavy Water Reaction with Calcium Carbide:
Hydrolysis of calcium carbide (CaC2) with heavy water yields deuterated acetylene (C2D2) and calcium deuteroxide [Ca(OD)2]:
CaC2+2D2O→C2D2+Ca(OD)2
Illustration: Softening Reagents for Temporary Hardness:
The chemical reagents capable of precipitating cations responsible for temporary hardness are slaked lime [Ca(OH)2] via Clark\'s method and sodium carbonate (Na2CO3).