Basic Physics and Microbiology for the Respiratory Therapist - Flashcards
Fundamentals of Physics for Respiratory Care
Energy and Work
Energy is defined as the ability to do work.
Work formula: (where is force and is distance).
In the Système International d'Unitès (SI), work and energy are expressed in joules ().
Power () is the rate of doing work, expressed in watts (), kilowatts (), or horsepower ().
Forms of Energy
Mechanical
Thermal
Chemical
Sound
Nuclear
Electrical
Law of Conservation of Energy
Energy cannot be created or destroyed; it can only be transferred from one form or system to another.
Work represents the transfer of energy by mechanical means.
Mechanical Energy
Kinetic Energy (KE): The energy possessed by an object when it is in motion.
Formula: (where is mass and is velocity).
Examples: The breaking of chemical bonds, hitting a ball, burning fuel, or water flowing over a falls.
Potential Energy (PE): Stored energy resulting from an object's position or state.
Formula: (where is mass, is the acceleration due to gravity, and is height).
Examples: A coiled spring, a stretched rubber band, a bicycle resting at the top of a hill, or ice before it melts.
States of Matter and Phase Transitions
Classification and Properties of Matter
Matter is defined as anything that has mass and occupies space, composed fundamentally of atoms.
Atoms combine to form elements, which in turn form molecules, compounds, and mixtures.
Compounds:
Formed through chemical reactions that join atoms with chemical bonds.
Possess a fixed ratio where components combine in exact proportions (e.g., ).
Difficult to separate, requiring a chemical reaction to split apart.
Exhibit new chemical properties distinct from their constituent elements (e.g., reactive sodium metal and toxic chlorine gas combine to form safe table salt, ).
Mixtures:
Physical combinations of substances without fixed ratios.
Components are easily separated using physical methods (e.g., filtering or sorting).
Each constituent retains its original physical and chemical traits (e.g., a mixture of salt and sand).
Three Primary States of Matter
Explained by Kinetic Theory, which states that all atoms and molecules composing matter are in constant motion.
Solids:
Possess the lowest amount of kinetic energy () and highest potential energy () or stored energy.
Characterized as incompressible substances maintaining a definite shape and volume.
Classifications:
Crystalline: Structured atomic layout.
Amorphous (supercooled liquids): Pure water cooled below () without freezing into ice, window glass, and supercooled cloud droplets high in the atmosphere.
Liquids:
Molecules possess higher than solids, but lower than gases.
Display fluidity (the ability to flow), maintaining a fixed volume while adapting to the shape of their container.
Liquids are essentially incompressible.
Gases:
Possess the greatest amount of kinetic energy ().
Lack fixed shapes or volumes; expand indefinitely to fill all available space.
Phase Transitions and Thermodynamics
Phase changes alter the relationship between kinetic energy () and potential energy () of a substance.
Evaporation / Vaporization: Transition of a substance from liquid to vapor.
Condensation: Transition from vapor or gas to liquid. Heat is removed from the substance and transferred to the surrounding air.
Melting / Melting Point: Transition from solid to liquid; melting point is the specific temperature at which this conversion occurs.
Freezing Point: The temperature at which a liquid changes into a solid state.
Boiling Point: The precise temperature at which a liquid converts into a gaseous state throughout its volume.
Latent Heat: The exact amount of heat that must be added to or removed from a substance to accomplish a complete change of state.
Heat of Vaporization: High amounts of energy are required during vaporization because intermolecular forces must be completely overcome to allow molecules to break free into the gaseous state.
Sublimation: The process where solid molecules bypass the liquid state completely and transition directly into a gas. Occurs when heat content increases to a level where solid-state molecules gain sufficient energy to break loose while remaining below the substance's melting point (e.g., dry ice / solid ).
Factors Increasing Evaporation Rate:
An increase in temperature.
An increase in surface area.
A decrease in ambient pressure.
Vapor Pressure: A measure of the force exerted by escaping liquid molecules as they hit the surface of a liquid and transition into the gas phase.
Respiratory Relevance: Effective mechanical ventilation requires a precise balance between the evaporation and condensation of moisture in respired gases to prevent mucosal drying and airway irritation.
Critical Temperature, Critical Pressure, and Vapors
Critical Temperature: The temperature threshold above which gaseous molecules of a substance cannot be converted back to a liquid, regardless of the amount of pressure exerted upon them.
Critical temperature of Water (): .
Critical temperature of Liquid Oxygen (): .
Critical Pressure: The pressure required at a substance's critical temperature to maintain equilibrium between the liquid and gas phases.
Gas versus Vapor:
A gas is a state of matter existing above its critical temperature.
A vapor is the gaseous form of any substance that can exist as a liquid or solid at ordinary temperatures and pressures (possessing a critical temperature above room temperature).
Common clinical vapors: Carbon dioxide () and Nitrous oxide ().
Physical Properties of Fluids and Measurement Scales
Temperature Measurement and Scales
Temperature represents a measure of the average kinetic energy () of the molecules in an object.
Thermometer Types:
Mercury Thermometer: Primary example of a non-electrical fluid-expansion thermometer.
Electrical Thermometer: Operates on the principle that electrical resistance in metal increases proportionally with temperature.
Thermistor: Resistance changes dynamically with temperature changes; heavily utilized in patient physiologic monitoring.
Conversion Formulas:
Celsius to Fahrenheit: \text{^\circ F} = \left(\frac{9}{5} \times \text{^\circ C}\right) + 32
Fahrenheit to Celsius: \text{^\circ C} = \frac{5}{9} \times (\text{^\circ F} - 32)
Celsius to Kelvin: K = \text{^\circ C} + 273
Temperature Conversion Examples:
Pressure Concepts and Equivalents
Pressure () is defined as force per unit area: .
Units of Pressure: Pounds per square inch ( or ), millimeters of mercury (), Torr, centimeters of water (), kilopascals (), and atmospheres ().
Pressure Conversion Factors:
Pressure Conversion Examples:
Density, Buoyancy, Viscosity, and Surface Tension
Density (): Defined as mass per unit volume (). Solids are the most dense state of matter; gases are the least dense.
Buoyancy (Archimedes' Principle): An object submerged in liquid is buoyed up by a force equal to the weight of the fluid displaced by the object. For example, Styrofoam is far less dense than wood of equivalent volume and floats much higher.
Viscosity: The physical force opposing deformation or flow of a fluid. Heated oil decreases in viscosity and flows more freely.
Surface Tension: Expressed in dynes per centimeter ().
Adhesive forces: Attraction between different molecular species (e.g., water molecules adhering to glass walls).
Cohesive forces: Attraction between like molecular species.
LaPlace's Law: Internal pressure within a spherical liquid drop or bubble is directly proportional to surface tension () and inversely proportional to radius ().
Formula:
The Gas Laws
Boyle's Law
Temperature () and mass () remain constant.
Volume () of a gas is inversely proportional to the absolute pressure () applied to it.
Formula: or

Charles's Law
Pressure () and mass () remain constant.
Volume () varies directly with absolute temperature ().
Formula: or

Gay-Lussac's Law
Volume () and mass () remain constant.
Pressure () varies directly with absolute temperature ().
Formula: or
Ideal Gas Law and Combined Gas Law
Ideal Gas Law: (where is the number of moles and is the universal gas constant).
Combined Gas Law: Derived when mass () and gas constant () remain constant while pressure, volume, and temperature change.
Formula: or

Dalton's Law of Partial Pressure
The total pressure exerted by a mixture of gases equals the sum of the partial pressures exerted by each individual gas in the mixture.
Formula:
Example: A gas mixture containing Gas A (), Gas B (), and Gas C () exerts a total mixture pressure of .
Avogadro's Law
Equal volumes of all gases under identical temperature and pressure conditions contain equal numbers of molecules.
.
At Standard Temperature and Pressure (STP: and ), of any ideal gas occupies and contains molecules.
Laws of Gas Diffusion
Diffusion: The net movement of gas molecules, driven by kinetic energy, from an area of high concentration to an area of lower concentration.
Graham's Law: When two gases are maintained under identical temperature and pressure conditions, their relative rates of diffusion () are inversely proportional to the square root of their molecular masses ( or ).
Formula:
Henry's Law: At a given temperature, the mass of a gas that dissolves in a given volume of liquid (without combining chemically) is directly proportional to the partial pressure of the gas and its solubility coefficient.
Fick's Law: The flow rate of a gas across a semipermeable membrane into a fluid phase is directly proportional to the surface area available for diffusion, the partial pressure gradient between compartments, and the gas solubility. Flow is inversely proportional to the membrane thickness and the square root of the gas's molecular weight.
Fluid Dynamics and Aerodynamics
Fundamentals of Fluid Mechanics
Fluid mechanics is the branch of physics concerned with the properties and motion of fluids.
Subdivided into:
Hydrodynamics: The study of liquids in motion.
Aerodynamics: The study of gases in motion.
Patterns of Fluid Flow
Laminar Flow: Smooth fluid motion in discrete concentric cylindrical layers or streamlines.
Turbulent Flow: Chaotic molecular movement where orderly concentric layers are lost. Triggered by sharp increases in flow velocity, variations in tube radius, or rough, uneven internal tube surfaces.
Transitional Flow: A combination of laminar and turbulent flow patterns, typically observed at anatomical or mechanical tube branch points.
Poiseuille's Law
Describes the relationship between pressure gradient, flow rate, and resistance for laminar fluid flow in an unbranched, rigid tube.
Viscous fluids require significantly larger pressure gradients to maintain a given flow rate.
Flow resistance is directly proportional to tube length; required driving pressure increases in direct proportion to tube length.
Flow resistance is inversely proportional to the fourth power of the internal radius (); minor reductions in tube radius produce drastic increases in flow resistance.
Reynolds' Number ()
A dimensionless ratio of inertial (momentum) forces to viscous forces quantifying flow regimes.
An indicates that turbulent flow predominates.
Bernoulli Principle and Principle of Continuity
Bernoulli Principle: As the forward velocity of a fluid flowing through a tube increases, its lateral wall pressure decreases proportionately. Fluid passing through a uniform tube experiences a progressive pressure drop along its path length.
Principle of Continuity: At a constant flow rate, fluid velocity varies inversely with the tube's cross-sectional area.
Venturi Principle
Pressure lost during fluid acceleration through a narrow tube constriction can be fully restored to pre-constriction levels if a gradual dilation cone is provided distal to the constriction.
Coanda Effect
When a contoured wall is added distal to a tube constriction, fluid stream adheres to the curved surface.
Caused by negative pressure generated past the constriction drawing fluid toward the wall, combined with ambient atmospheric pressure pushing the stream against the surface.
Electricity and Electrical Safety in Medical Practice
Principles of Electricity
Electricity is produced by electron flow along a conductive pathway or circuit.
Governed by the driving force pushing electrons (voltage) and path resistance, measured using an ammeter in amperes ().
Ohm's Law
Expresses the relationship between current, voltage, and resistance.
Voltage (): Electrical potential difference between two points (driving pressure).
Current (): Rate of electron flow through a conductor, moving from negative to positive terminals.
Resistance (): Opposition offered to electron flow.
Formula:
Electrical Circuit Configurations
Standard components: Voltage source, load, conductive path.
Series Circuit: Current flows sequentially through a single continuous path.
Parallel Circuit: Multiple series sub-circuits connected across a shared voltage source.
Kirchhoff's Laws
Series Circuits:
May contain multiple voltage sources; total source voltage equals the algebraic sum of individual sources of matching polarity.
Current is identical through all components.
Total circuit resistance equals the sum of individual resistances:
The sum of voltage drops across resistive elements equals total applied voltage.
Parallel Circuits:
Applied voltage is uniform across all circuit branches.
Branch current varies inversely with individual branch resistance.
Total circuit current equals the sum of individual branch currents:
Total resistance equals the reciprocal of the sum of reciprocals:
Wheatstone Bridge Circuit
Specialized circuit configuration widely utilized in medical devices, including oxygen analyzers and strain gauge pressure transducers.
Electrical Safety and Physiological Hazards
Electric current passing through body tissue impairs normal physiological function depending on current magnitude, duration, and anatomical pathway.
Macroshock: High-amplitude current applied across intact body surfaces ().
Microshock: Low-amplitude current delivered directly to internal cardiac tissue ().
Clinical injuries: Thermal burns, muscular tetanus, and cardiac stimulation resulting in lethal ventricular fibrillation.
Hazard Prevention Strategies:
Grounding: Providing a low-resistance pathway (third U-shaped plug prong) directing leakage current away from patients/operators.
Ground-Fault Circuit Interrupters (GFCI): Continuously monitors current differential between hot and neutral wires, tripping circuit breakers instantly if an imbalance occurs.
Equipotential Grounding & Insulation: Maintaining high device insulation and connecting all patient-care electronics to outlets sharing a common low-resistance ground.
Electrical Safety Training: Educating staff on proper usage and handling of electrical equipment to prevent misuse and accidents.
Principles of Clinical Microbiology
Definitions and Fundamentals
Microbiology: The scientific study of microscopic organisms, including bacteria, viruses, protozoa, fungi, and algae.
Pathogens: Microorganisms capable of producing infectious disease in susceptible hosts.
Clinical diagnosis of infectious disease requires isolating the specific pathogen directly from the infection site.
Normal Flora: Microorganisms residing naturally on the skin, oral/upper respiratory mucosa, GI and urogenital tracts, and conjunctiva. Ordinarily non-pathogenic, but can cause opportunistic infection if overgrown or translocated.
Bacteria
Single-celled prokaryotic organisms (lacking a true membrane-bound nucleus and organelles), ranging in size from to
Primary Morphologies: Cocci (spherical), Bacilli (rodlike), and Spirochetes (spiral).
Classified by differential staining techniques: Gram stain and Acid-Fast stain.
Principal causative agents of hospital-acquired pneumonia and Ventilator-Associated Pneumonia (VAP).
Cell Organelle Functions
Nucleus: Stores genetic DNA blueprints and directs cellular activities.
Mitochondria: Converts nutrients into chemical energy ().
Ribosomes: Synthesizes structural and functional proteins.
Endoplasmic Reticulum (ER): Smooth ER synthesizes lipids; Rough ER processes proteins.
Golgi Apparatus: Sorts, packages, and routes proteins to cellular destinations.
Lysosomes: Contains hydrolytic enzymes to digest waste and worn cellular components.
Viruses
Submicroscopic obligate intracellular parasites ( to in size).
Structure: Nucleic acid core (DNA or RNA) enclosed in a protein sheath (capsid).
Nonliving entities requiring living host machinery to replicate.
Classified by architecture (icosahedral, helical, complex), nucleic acid type (DNA vs. RNA), and target host domain (animal, plant, bacterial).
Rickettsiae and Chlamydia species
Obligate intracellular parasites, measured at in diameter.
Possess complex structural features similar to bacteria, but replicate like viruses within living host cells.
Transmission routes:
Rickettsiae spp.: Transmitted by insect vectors (lice, fleas, ticks).
Chlamydia spp.: Transmitted via direct contact or airborne routes.
Protozoa and Fungi
Protozoa: Single-celled eukaryotic organisms occurring individually or in colonies. Highly prevalent in tropical regions with compromised sanitation. Examples: Amebiasis, malaria, and trypanosomiasis.
Fungi: Eukaryotic organisms comprising yeasts and molds. Molds consist of cellular filaments termed hyphae, reproducing asexually via spore formation.
Disease Transmission and Decontamination Methods
Requirements for Disease Transmission
Requires three essential components:
A pathogen source.
A mode or pathway of transmission.
A susceptible host.
Transmission Routes
Contact: Direct body-surface contact or indirect contact via contaminated objects.
Vehicles: Passive nonliving vectors (food, water, air, blood) transporting pathogens.
Airborne: Dispersal of aerosolized infectious particles suspended in air.
Vectors: Animal or insect vectors (e.g., mosquitoes) transferring pathogens between hosts.
Decontamination Terms and Process Hierarchy
Decontamination: Systematic removal of pathogenic microbes from medical equipment via cleaning, disinfection, or sterilization.
Cleaning: Removal of foreign/organic soil (blood, pus, serum, feces) using hot water, soaps, detergents, or enzymatic products. Essential first step prior to high-level processing.
Disinfection: Destruction of most pathogenic microbes except bacterial endospores (accomplished via liquid chemicals or heat).
Sterilization: Complete destruction and elimination of all forms of microbial life, including spores.
Germicide: Agent destroying pathogens on living tissue or inanimate objects.
Disinfectant: Germicide applied strictly to inanimate objects.
Antiseptics: Topical germicides applied safely to human skin or living tissue.
Microbicidal Categories:
Bactericides: Destroy bacteria.
Virucides: Destroy viruses.
Fungicides: Destroy fungi.
Factors Modifying Germicide Efficacy
Microbial load: Time required to kill microbes is proportional to the initial population size.
Microbial resistance: Cellular capsules and endospores elevate pathogen resistance.
Potency and concentration: Disinfectant potency increases proportionally with concentration.
Environmental parameters: Temperature, pH, and relative humidity directly govern efficacy.
Specific Disinfection and Sterilization Modalities
Pasteurization: Physical disinfection method developed by Louis Pasteur. Heats liquids to mild temperatures below (e.g., milk at for or for ) followed by rapid cooling. Kills vegetating pathogens like Salmonella and E. coli, but does not achieve sterilization.
Quaternary Ammonium Compounds (Quats): Cationic detergents containing four alkyl/heterocyclic radicals bound to a halide ion (fluoride , chloride , bromide , iodide ). Used for surface disinfection.
Alcohols: Ethyl and isopropyl alcohol (–). Bactericidal, virucidal, and fungicidal; ineffective against bacterial endospores.
Glutaraldehyde: Potent liquid high-level disinfectant used extensively in respiratory care for endoscopes, spirometry tubing, and transducers.
Ortho-phthalaldehyde (OPA): Pale blue liquid high-level disinfectant providing rapid microbicidal action.
Hydrogen Peroxide (): Forms reactive hydroxyl free radicals attacking membrane lipids and nucleic acids.
Sterilization Modalities:
Physical: Incineration (burning), dry heat ovens, boiling water, and steam under pressure (autoclave).
Chemical: Ethylene oxide (EtO) gas, the most common gaseous sterilant for heat-sensitive devices.
Spaulding's Infection-Risk Device Classification
Critical: Devices entering sterile tissues or vascular systems (e.g., surgical instruments). Requires absolute sterilization.
Semi-critical: Devices contacting intact mucous membranes without entering sterile spaces (e.g., endoscopes, respiratory therapy equipment). Requires high-level disinfection.
Noncritical: Devices contacting intact skin surfaces only (e.g., blood pressure cuffs). Requires low- to intermediate-level disinfection.
Infection Surveillance and Isolation Precautions
Components of Surveillance Programs
Continuous monitoring of equipment decontamination processing procedures.
Routine microbiological sampling of in-use respiratory equipment.
Microbiological identification and tracking of isolated clinical pathogens.
Standard Precautions
Applied universally to all patients in healthcare settings.
Key measures: Rigorous handwashing (most effective prevention measure), wearing protective gloves, safe needle handling, and cough/sneeze etiquette.
Standard Precaution Additions: Respiratory hygiene/cough etiquette, safe injection practices, and clinician mask usage during spinal/epidural lumbar punctures.
Transmission-Based Isolation Precautions
Airborne Precautions: Requires negative-pressure isolation rooms with dedicated air handling/ventilation and fit-tested respiratory protection (e.g., N95 masks) for personnel.
Droplet Precautions: Prevents transmission via large-particle respiratory droplets generated during coughing, sneezing, talking, or procedures like bronchoscopy and suctioning.
Contact Precautions: Mandated for pathogens transmitted via direct physical contact or contact with contaminated environmental surfaces.
Personal Protective Equipment (PPE)
Gloves: Protect healthcare personnel from blood/body fluid contact, prevent patient transfer of transient hand flora, and eliminate cross-contamination between patients.
Gowns: Prevent clothing contamination and skin exposure during fluid-generating activities.
Face Shields & Eyewear: Worn whenever splashing or spraying of blood, secretions, or bodily fluids is anticipated.
Mass Casualty Considerations
Management and infection control containment strategies for epidemic or pandemic febrile respiratory illnesses during mass casualty emergencies.