Comprehensive Study Notes on the Chemistry of S and P Block Elements

Course Curriculum and Evaluation Architecture

  • Assessment Scheme:

    • Continuous Assessment Tests (CATs): 30%30\%

    • Final Examination: 70%70\%

    • Cumulative Assessment Total: 100%100\%

  • Curriculum Structure:

    • Block 1: General properties of the elements and their periodicity.

    • Block 2: Systematic group-by-group chemistry of the main group elements.

    • Module 1: The ss- and pp-blocks in the Periodic Table.

    • Module 2: Periodicity of properties across ss- and pp-block elements.

    • Module 3: Group-specific chemistry of elements in Groups 1, 2, and 13 through 18 (Groups I to VIII).

    • Module 4: Technological, biological, and industrial applications of elements across Groups 1 through 18.

Structural Architecture of the Periodic Table

  • Electronic Block Demarcation:

    • The Periodic Table is segregated into ss-, pp-, dd-, and ff-blocks according to the specific subshell orbital in which an atom's highest-energy valence electron resides.

    • Lithium (LiLi, [He]2s1[He]2s^1): Valence electron occupies an ss orbital; classified within the ss-block.

    • Boron (BB, [He]2s22p1[He]2s^2 2p^1): Valence electron occupies a pp orbital; classified within the pp-block.

    • Molybdenum (MoMo, [Kr]5s14d5[Kr]5s^1 4d^5): Valence electron occupies a dd orbital; classified within the dd-block.

    • The ss- and pp-blocks collectively constitute the main-group elements.

Classification of main-group, transition, and inner-transition elements by orbital blocks
  • Nomenclature and Group Classification Systems:

    • Standard IUPAC recommendations designate eighteen vertical columns designated by Arabic numerals from 11 to 1818.

    • Main-group chemistry conventionally numbers the primary columns into eight core groups (Groups 1–8 or Groups I–VIII):

    • Group 1: Alkali metals (Li,Na,K,Rb,Cs,FrLi, Na, K, Rb, Cs, Fr

    • Group 2: Alkaline earth metals (Be,Mg,Ca,Sr,Ba,RaBe, Mg, Ca, Sr, Ba, Ra

    • Group 13 (Group III): Triels / Boron family (B,Al,Ga,In,TlB, Al, Ga, In, Tl

    • Group 14 (Group IV): Tetrels / Carbon family (C,Si,Ge,Sn,PbC, Si, Ge, Sn, Pb

    • Group 15 (Group V): Pnictogens (N,P,As,Sb,BiN, P, As, Sb, Bi

    • Group 16 (Group VI): Chalcogens (O,S,Se,Te,PoO, S, Se, Te, Po

    • Group 17 (Group VII): Halogens (F,Cl,Br,I,AtF, Cl, Br, I, At

    • Group 18 (Group VIII): Noble gases (He,Ne,Ar,Kr,Xe,RnHe, Ne, Ar, Kr, Xe, Rn

    • Transition element columns in the dd-block grouped in vertical three-element sequences are designated as triads.

    • Horizontal rows are termed periods. The sequence from HH to HeHe represents Period 1, whereas the main-group row from LiLi to NeNe is frequently designated as the first full main-group period.

    • Lanthanoids strictly comprise the 14 elements from Cerium (CeCe, Z=58Z = 58) to Lutetium (LuLu, Z=71Z = 71), with Lanthanum (LaLa, Z=57Z = 57) grouped alongside by convention.

    • Actinoids strictly comprise the 14 elements from Thorium (ThTh, Z=90Z = 90) to Lawrencium (LrLr, Z=103Z = 103), with Actinium (AcAc, Z=89Z = 89) grouped alongside by convention.

  • Valence Electron Configurations in Heavier Main Group Elements:

    • Standard valence presentations for heavier pp-block elements in Periods 4 through 7 suppress filled underlying core electrons, including post-transition dd and ff subshells.

    • Gallium (Z=31Z = 31): Full configuration is [Ar]3d104s24p1[Ar]3d^{10}4s^2 4p^1.

    • Thallium (Z=81Z = 81): Full configuration is [Xe]4f145d106s26p1[Xe]4f^{14}5d^{10}6s^2 6p^1.

Periodicity and Fundamental Atomic Properties

  • Definitions of Atomic and Ionic Radii:

    • Metallic radius: Defined as half the internuclear distance between two adjacent, identical metal atoms within a crystal lattice.

    • Covalent radius: Defined for homonuclear diatomic species as half the internuclear distance between two identical covalently bonded atoms possessing a formal bond order of 1 (single covalent bond).

    • van der Waals radius: Defined as half the distance of closest approach between two non-bonded atoms in a solid crystal lattice.

  • Periodic Trends in Atomic Size:

    • Radii consistently contract across a period from left to right due to an increase in effective nuclear charge (ZeffZ_{\text{eff}}). The principal quantum shell remains identical while nuclear protons increase, pulling the valence electron cloud inward toward the nucleus.

    • Down a given group, atomic radii expand because additional principal energy levels (shells) are occupied, which spatially offsets the elevated nuclear charge.

    • He and Ne lack covalent radii because they form no neutral homonuclear single-bonded diatomic molecules; their reported dimensions represent non-bonded van der Waals radii.

Comparative covalent radii for main group s- and p-block elements
  • Quantitative Non-Polar Covalent Radii (pmpm) of Main-Group Elements:

    • Period 1: HH (32 pm32\,pm); HeHe (31 pm31\,pm

    • Period 2: LiLi (123 pm123\,pm), BeBe (89 pm89\,pm), BB (82 pm82\,pm), CC (77 pm77\,pm), NN (75 pm75\,pm), OO (73 pm73\,pm), FF (71 pm71\,pm), NeNe (69 pm69\,pm

    • Period 3: NaNa (154 pm154\,pm), MgMg (136 pm136\,pm), AlAl (118 pm118\,pm), SiSi (111 pm111\,pm), PP (106 pm106\,pm), SS (102 pm102\,pm), ClCl (99 pm99\,pm), ArAr (98 pm98\,pm

    • Period 4: KK (203 pm203\,pm), CaCa (174 pm174\,pm), GaGa (126 pm126\,pm), GeGe (122 pm122\,pm), AsAs (120 pm120\,pm), SeSe (117 pm117\,pm), BrBr (114 pm114\,pm), KrKr (111 pm111\,pm

    • Period 5: RbRb (216 pm216\,pm), SrSr (191 pm191\,pm), InIn (144 pm144\,pm), SnSn (140 pm140\,pm), SbSb (140 pm140\,pm), TeTe (136 pm136\,pm), II (133 pm133\,pm), XeXe (126 pm126\,pm

    • Period 6: CsCs (235 pm235\,pm), BaBa (198 pm198\,pm), TlTl (148 pm148\,pm), PbPb (147 pm147\,pm), BiBi (146 pm146\,pm), PoPo (146 pm146\,pm), AtAt (145 pm145\,pm

  • d-Block and Lanthanoid Contractions:

    • Shielding efficacy of atomic subshells follows the decreasing hierarchical sequence: s>p>d>fs > p > d > f.

    • Gallium (GaGa) exhibits an anomalous covalent radius of 126 pm126\,pm, contracting sharply by approximately 48 pm48\,pm relative to expectation following AlAl (118 pm118\,pm). This results from poor nuclear shielding exerted by the ten intervening 3d3d electrons, exposing outer 4s24p14s^2 4p^1 valence electrons to elevated ZeffZ_{\text{eff}}.

    • Indium (InIn) displays an analogous dd-block contraction of approximately 47 pm47\,pm.

    • Thallium (TlTl) exhibits an even larger reduction of approximately 50 pm50\,pm, originating from the cumulative poor screening of both filled 3d/4d/5d3d/4d/5d subshells and the filled 4f144f^{14} subshell (lanthanoid contraction).

  • Structural Mechanics of Anion Formation:

    • When one or more electrons are introduced to a neutral atom, inter-electronic repulsion escalates while the central positive nuclear charge remains static, diminishing the net effective nuclear charge per electron.

    • This allows the valence electron cloud to expand outward, producing an anion significantly larger than its parent neutral atom.

    • Quantitative verification: The neutral chlorine atom (ClCl) has a non-bonded van der Waals radius of 1.40 A˚1.40\,\text{Å} (140 pm140\,pm), whereas the chloride anion (Cl−Cl^-) exhibits an expanded ionic radius of 1.81 A˚1.81\,\text{Å} (181 pm181\,pm).

  • Ionization Energy Thermodynamics:

    • Defined as the minimum energy input required to remove the most loosely bound electron from an isolated gaseous neutral atom or ionic species:

    • X(g)→X+(g)+e−X(g) \rightarrow X^+(g) + e^-

    • Ionization energies depend fundamentally upon:

    • Atomic or ionic radius.

    • Total positive charge resident on the nucleus.

    • Shielding/screening efficiency exerted by core electron shells.

    • Angular momentum type of the orbital housing the departing electron (s,p,d,fs, p, d, f

    • Spin pairing status of the departing electron.

    • Successive ionization energies universally escalate (IE1<IE2<IE3IE_1 < IE_2 < IE_3) due to increasing net positive charge on the ion, which binds remaining electrons closer to the nucleus.

  • Electron Affinity Formalism:

    • Modern definition: The electron affinity (EeaE_{\text{ea}}) is the energy required to detach an electron from a singly charged negative gaseous ion (an endothermic detachment process):

    • M−(g)→M(g)+e−ΔEea>0M^-(g) \rightarrow M(g) + e^- \quad \Delta E_{\text{ea}} > 0

    • Historical thermodynamic definition: Energy liberated upon introducing an extra electron to a neutral gaseous atom:

    • M(g)+e−→M−(g)ΔEea<0M(g) + e^- \rightarrow M^-(g) \quad \Delta E_{\text{ea}} < 0

    • Fundamental internal energy relation: EA=−ΔU(0 K)EA = -\Delta U(0\,K).

    • First electron affinity process: Y(g)+e−→Y−(g)Y(g) + e^- \rightarrow Y^-(g).

    • Second electron affinity process: Y−(g)+e−→Y2−(g)Y^-(g) + e^- \rightarrow Y^{2-}(g).

    • First electron attachment is typically exothermic, balancing the attractive pull of the nuclear charge against valence shell repulsions.

    • Second electron attachment is universally endothermic (ΔEAH>0\Delta_{\text{EA}}H > 0) due to electrostatic repulsions between incoming electrons and the net negatively charged anion.

  • Thermodynamic Electron Attachment Enthalpies (ΔEAH(298 K)\Delta_{\text{EA}}H(298\,K) in kJ mol−1kJ\,mol^{-1}):

    • H(g)+e−→H−(g)H(g) + e^- \rightarrow H^-(g): −73 kJ mol−1-73\,kJ\,mol^{-1}

    • Li(g)+e−→Li−(g)Li(g) + e^- \rightarrow Li^-(g): −60 kJ mol−1-60\,kJ\,mol^{-1}

    • Na(g)+e−→Na−(g)Na(g) + e^- \rightarrow Na^-(g): −53 kJ mol−1-53\,kJ\,mol^{-1}

    • K(g)+e−→K−(g)K(g) + e^- \rightarrow K^-(g): −48 kJ mol−1-48\,kJ\,mol^{-1}

    • N(g)+e−→N−(g)N(g) + e^- \rightarrow N^-(g): ≈0 kJ mol−1\approx 0\,kJ\,mol^{-1}

    • P(g)+e−→P−(g)P(g) + e^- \rightarrow P^-(g): −72 kJ mol−1-72\,kJ\,mol^{-1}

    • O(g)+e−→O−(g)O(g) + e^- \rightarrow O^-(g): −141 kJ mol−1-141\,kJ\,mol^{-1}

    • O−(g)+e−→O2−(g)O^-(g) + e^- \rightarrow O^{2-}(g): +798 kJ mol−1+798\,kJ\,mol^{-1}

    • S(g)+e−→S−(g)S(g) + e^- \rightarrow S^-(g): −201 kJ mol−1-201\,kJ\,mol^{-1}

    • S−(g)+e−→S2−(g)S^-(g) + e^- \rightarrow S^{2-}(g): +640 kJ mol−1+640\,kJ\,mol^{-1}

    • F(g)+e−→F−(g)F(g) + e^- \rightarrow F^-(g): −328 kJ mol−1-328\,kJ\,mol^{-1}

    • Cl(g)+e−→Cl−(g)Cl(g) + e^- \rightarrow Cl^-(g): −349 kJ mol−1-349\,kJ\,mol^{-1}

    • Br(g)+e−→Br−(g)Br(g) + e^- \rightarrow Br^-(g): −325 kJ mol−1-325\,kJ\,mol^{-1}

    • I(g)+e−→I−(g)I(g) + e^- \rightarrow I^-(g): −295 kJ mol−1-295\,kJ\,mol^{-1}

  • Electronegativity Formulations:

    • Denoted by the symbol χ\chi, electronegativity quantifies an atom's relative propensity to attract shared electron density toward itself in a chemical bond.

    • Pauling Scale (χP\chi^P): Formulated on the premise that heteronuclear bond energies deviate from homonuclear averages due to ionic resonance stabilization (X+Y−X^+ Y^- or X−Y+X^- Y^+).

    • Allred–Rochow Scale (χAR\chi^{AR}): Gauges electronegativity by calculating the electrostatic force exerted by the effective nuclear charge (ZeffZ_{\text{eff}}) upon valence electrons at a distance equal to the atom's covalent radius (rcovr_{\text{cov}}).

    • Mulliken Scale: Computes electronegativity directly from the arithmetic mean of the atom's first ionization energy and electron affinity.

Pauling electronegativity values across the s- and p-blocks
  • Pauling Electronegativity (χP\chi^P) Reference Values:

    • Hydrogen: H=2.2H = 2.2

    • Group 1: Li=1.0Li = 1.0, Na=0.9Na = 0.9, K=0.8K = 0.8, Rb=0.8Rb = 0.8, Cs=0.8Cs = 0.8

    • Group 2: Be=1.6Be = 1.6, Mg=1.3Mg = 1.3, Ca=1.0Ca = 1.0, Sr=0.9Sr = 0.9, Ba=0.9Ba = 0.9

    • Group 13: B=2.0B = 2.0, Al(III)=1.6Al(III) = 1.6, Ga(III)=1.8Ga(III) = 1.8, In(III)=1.8In(III) = 1.8, Tl(I)=1.6Tl(I) = 1.6, Tl(III)=2.0Tl(III) = 2.0

    • Group 14: C=2.6C = 2.6, Si=1.9Si = 1.9, Ge(IV)=2.0Ge(IV) = 2.0, Sn(II)=1.8Sn(II) = 1.8, Sn(IV)=2.0Sn(IV) = 2.0, Pb(II)=1.9Pb(II) = 1.9, Pb(IV)=2.3Pb(IV) = 2.3

    • Group 15: N=3.0N = 3.0, P=2.2P = 2.2, As(III)=2.2As(III) = 2.2, Sb=2.1Sb = 2.1, Bi=2.0Bi = 2.0

    • Group 16: O=3.4O = 3.4, S=2.6S = 2.6, Se=2.6Se = 2.6, Te=2.1Te = 2.1, Po=2.0Po = 2.0

    • Group 17: F=4.0F = 4.0, Cl=3.2Cl = 3.2, Br=3.0Br = 3.0, I=2.7I = 2.7, At=2.2At = 2.2

  • Mathematical Estimation of Bond Dissociation Enthalpy (DD):

    • Enthalpy of atomization for homonuclear diatomics:

    • ΔaH∘(X,g)=12D(X−X)\Delta_{\text{a}}H^\circ(X, g) = \frac{1}{2} D(X-X)

    • Heteronuclear bond excess energy parameter (in kJ mol−1kJ\,mol^{-1}):

    • ΔD=D(X−Y)experimental−12[D(X−X)+D(Y−Y)]\Delta D = D(X-Y)_{\text{experimental}} - \frac{1}{2} [D(X-X) + D(Y-Y)]

    • Conversion to electron-volts (eVeV):

    • 1.0 eV≈96.5 kJ mol−11.0\,eV \approx 96.5\,kJ\,mol^{-1}

    • Pauling's empirical relation:

    • ΔD=∣χP(X)−χP(Y)∣\sqrt{\Delta D} = |\chi^P(X) - \chi^P(Y)|

    • Rearranged to estimate heteronuclear bond dissociation energy:

    • D(X−Y)=ΔD+12[D(X−X)+D(Y−Y)]D(X-Y) = \Delta D + \frac{1}{2} [D(X-X) + D(Y-Y)]

  • Dipole Moments and Polarizability:

    • Symmetrical charge distribution in homonuclear bonds renders them non-polar. Heteronuclear bonds have uneven electron distribution toward the more electronegative partner, generating an electric dipole moment (μ\mu):

    • μ=q×d\mu = q \times d

    • Elementary electronic charge: e=1.602×10−19 Ce = 1.602 \times 10^{-19}\,C.

    • Fundamental unit conversion: 1 Debye (D)=3.336×10−30 C m1\,\text{Debye (D)} = 3.336 \times 10^{-30}\,C\,m.

    • Polarizability measures the ease with which an atom, molecule, or ion's electron cloud is distorted by external electric fields from neighbouring ions.

    • Anions with large volumes and high polarizabilities are soft bases; small, tightly held, non-polarizable species are hard bases.

    • Calculated ionic polarizabilities (C m3×10−13C\,m^3 \times 10^{-13}):

    • F−=13F^- = 13

    • Cl−=37Cl^- = 37

    • Br−=47Br^- = 47

    • I−=69I^- = 69

    • O2−=30O^{2-} = 30

    • S2−=68S^{2-} = 68

    • N3−=54N^{3-} = 54

    • P3−=103P^{3-} = 103

Hydrogen: Structure, Isotopes, and Reactivity

  • Fundamental Atomic Properties:

    • Ground-state electronic configuration: 1s11s^1. The nucleus consists of a single proton.

    • First ionization energy: 1312 kJ mol−11312\,kJ\,mol^{-1}. This magnitude prevents the existence of bare, unsolvated protons (H+H^+) under ambient chemical conditions.

    • Proton hydration enthalpy: ΔhydH∘(H+,g)=−1091 kJ mol−1\Delta_{\text{hyd}}H^\circ(H^+, g) = -1091\,kJ\,mol^{-1}.

    • Hydrated proton species crystallographically isolated in solid acid hydrates include the oxonium cation ([H3O]+[H_3O]^+), the diaquahydrogen ion ([H5O2]+[H_5O_2]^+), and larger clusters ([H9O4]+[H_9O_4]^+), representing the broader structural family [H(OH2)n]+[H(OH_2)_n]^+ (n=1 to 20n = 1 \text{ to } 20).

    • Hydride ion formation: H(g)+e−→H−(g)H(g) + e^- \rightarrow H^-(g); electron attachment enthalpy ΔEAH(298 K)=−73 kJ mol−1\Delta_{\text{EA}}H(298\,K) = -73\,kJ\,mol^{-1}.

  • Physical Properties of Hydrogen Isotopes:

    • Protium (1H^1H or HH): Natural abundance 99.985%99.985\%, isotopic mass 1.0078 u1.0078\,u, nuclear spin I=12I = \frac{1}{2}.

    • Deuterium (2H^2H or DD): Natural abundance 0.0156%0.0156\%, isotopic mass 2.0141 u2.0141\,u, nuclear spin I=1I = 1.

    • Tritium (3H^3H or TT): Natural abundance <1 in 1017< 1 \text{ in } 10^{17} atoms, isotopic mass 3.0160 u3.0160\,u, nuclear spin I=12I = \frac{1}{2}.

Comparative potential energy curve illustrating the zero-point energy differences between C-H and C-D bonds
  • Kinetic Isotope Effect and Vibrational Spectroscopy:

    • Fundamental diatomic vibrational wavenumbers: H2=4159 cm−1H_2 = 4159\,cm^{-1}, HD=3630 cm−1HD = 3630\,cm^{-1}, D2=2990 cm−1D_2 = 2990\,cm^{-1}.

    • Zero-point energy (ZPE) corresponds to the lowest vibrational state (v=0v = 0). Because deuterium has twice the mass of protium, the reduced mass (μ\mu) of a C−DC-D bond is greater, giving it a lower ZPE and higher bond dissociation enthalpy than an equivalent C−HC-H bond.

    • Cleaving a C−DC-D bond requires greater activation energy, slowing the rate-determining step in deuterated compounds (the primary kinetic isotope effect).

    • Vibrational harmonic wavenumber relationship:

    • νˉ=12πckμ\bar{\nu} = \frac{1}{2\pi c} \sqrt{\frac{k}{\mu}}

  • Under the assumption of invariant chemical force constants (kO-H=kO-Dk_{\text{O-H}} = k_{\text{O-D}}), wavenumber scales inversely with the square root of reduced mass:

  • νˉO-DνˉO-H=μO-HμO-D\frac{\bar{\nu}_{\text{O-D}}}{\bar{\nu}_{\text{O-H}}} = \sqrt{\frac{\mu_{\text{O-H}}}{\mu_{\text{O-D}}}}

  • Given isotopic atomic masses O=16.00O = 16.00, H=1.01H = 1.01, D=2.01D = 2.01:

  • μO-H=16.00×1.0116.00+1.01=0.950 u\mu_{\text{O-H}} = \frac{16.00 \times 1.01}{16.00 + 1.01} = 0.950\,u

  • μO-D=16.00×2.0116.00+2.01=1.786 u\mu_{\text{O-D}} = \frac{16.00 \times 2.01}{16.00 + 2.01} = 1.786\,u

  • Ratio of stretching frequencies:

  • νˉO-DνˉO-H=0.9501.786=0.729\frac{\bar{\nu}_{\text{O-D}}}{\bar{\nu}_{\text{O-H}}} = \sqrt{\frac{0.950}{1.786}} = 0.729

  • An absorption at 3650 cm−13650\,cm^{-1} in an O−HO-H bond shifts upon deuteration to:

  • νˉO-D=3650×0.729=2661 cm−1\bar{\nu}_{\text{O-D}} = 3650 \times 0.729 = 2661\,cm^{-1}

  • Comparative Physical Properties of Light Water (H2OH_2O) and Heavy Water (D2OD_2O):

    • Melting point: H2O=273.00 KH_2O = 273.00\,K; D2O=276.83 KD_2O = 276.83\,K

    • Boiling point: H2O=373.00 KH_2O = 373.00\,K; D2O=374.42 KD_2O = 374.42\,K

    • Temperature of maximum density: H2O=277.0 KH_2O = 277.0\,K; D2O=284.2 KD_2O = 284.2\,K

    • Maximum density: H2O=0.99995 g cm−3H_2O = 0.99995\,g\,cm^{-3}; D2O=1.1053 g cm−3D_2O = 1.1053\,g\,cm^{-3}

    • Relative permittivity (298 K298\,K): H2O=78.39H_2O = 78.39; D2O=78.06D_2O = 78.06

    • Ion product (KwK_{\text{w}} at 298 K298\,K): H2O=1.0×10−14H_2O = 1.0 \times 10^{-14}; D2O=2.0×10−15D_2O = 2.0 \times 10^{-15}

    • Symmetric stretch wavenumber (uˉ1\bar{ u}_1, gas): H2O=3657 cm−1H_2O = 3657\,cm^{-1}; D2O=2671 cm−1D_2O = 2671\,cm^{-1}

  • Dihydrogen Synthesis and Reforming Pathways:

    • Laboratory generation:

    • Zn(s)+2HCl(aq)→ZnCl2(aq)+H2(g)Zn(s) + 2HCl(aq) \rightarrow ZnCl_2(aq) + H_2(g)

    • 2Al(s)+2NaOH(aq)+6H2O(l)→2Na[Al(OH)4](aq)+3H2(g)2Al(s) + 2NaOH(aq) + 6H_2O(l) \rightarrow 2Na[Al(OH)_4](aq) + 3H_2(g)

    • CaH2(s)+2H2O(l)→Ca(OH)2(aq)+2H2(g)CaH_2(s) + 2H_2O(l) \rightarrow Ca(OH)_2(aq) + 2H_2(g)

    • Industrial generation (Steam Reforming and Water-Gas Shift):

    • CH4+H2O→Ni catalyst,1200 KCO+3H2CH_4 + H_2O \xrightarrow{Ni \text{ catalyst}, 1200\,K} CO + 3H_2

    • CO+H2O→iron oxide catalyst,700 KCO2+H2CO + H_2O \xrightarrow{\text{iron oxide catalyst}, 700\,K} CO_2 + H_2

    • Methanol synthesis using syngas:

    • CO+2H2→Cu/ZnO catalyst,473−573 K,50 barCH3OHCO + 2H_2 \xrightarrow{Cu/ZnO \text{ catalyst}, 473-573\,K, 50\,\text{bar}} CH_3OH

    • CO2+3H2→Cu/ZnO catalyst,473−573 K,50 barCH3OH+H2OCO_2 + 3H_2 \xrightarrow{Cu/ZnO \text{ catalyst}, 473-573\,K, 50\,\text{bar}} CH_3OH + H_2O

  • Photolytic Water Splitting and Catalytic Photosensitization:

    • Thermodynamic water oxidation potential: E∘=−1.23 VE^\circ = -1.23\,V; biological systems utilize hydrogenase metalloenzymes.

    • Artificial catalytic cycle: Utilizes the tris(bipyridine)ruthenium(II) complex ([Ru(bpy)3]2+[Ru(bpy)_3]^{2+}), which absorbs light at λ=452 nm\lambda = 452\,nm to reach an excited state {[Ru(bpy)_3]^{2+}}^*$.\n * Electron transfer from the excited state complex to an electron-accepting quenching agent (A^+)yields) yields[Ru(bpy)3]^{3+},whichoxidizeswaterto, which oxidizes water toO_2whileprotonsarecatalyticallyreducedtowhile protons are catalytically reduced toH_2.\n * A sacrificial electron donor (e.g., [EDTA]^{4-}) regenerates the catalyst.\n\n* **Solid-State Hydrogen Bonding Patterns:**\n * Carboxylic acids assemble into eight-membered planar cyclic dimeric motifs supported by paired O-H\cdots O interactions.\n * Formic acid vapour contains monomers and dimers, whereas crystalline deuterated formic acid (DCO_2D) forms extended, perpendicular and parallel hydrogen-bonded ribbon arrays.\n * Hydrogen fluoride (HF)solidifiesasextendedzigzagchainswithlinear) solidifies as extended zigzag chains with linear[F-H-F]^- motifs.\n\n![Hydrogen-bonded base pairing between Adenine-Thymine and Guanine-Cytosine](https://assets.knowt.com/pdf-flow-prod/21a95bc9-e028-4f36-970e-80c56454dffa-figures/33.png)\n\n* **Biological Complementary Base Pairing in DNA:**\n * Adenine–Thymine (A-T) base pairing: Mediated by two distinct hydrogen bonds:\n * Purine imidazole/pyrimidine ring: Ring nitrogen acceptor to ring amine donor (N\cdots H-N\n * Carbonyl to amine: O\cdots H-N\n * Guanine–Cytosine (G-C) base pairing: Mediated by three distinct hydrogen bonds:\n * Carbonyl to exocyclic amine: O\cdots H-N\n * Ring nitrogen to ring hydrogen-nitrogen: N\cdots H-N\n * Exocyclic amine to carbonyl: N-H\cdots O\n\n# Group 1: The Alkali Metals\n\n* **Systematic Physical and Thermodynamic Properties:**\n * Lithium (Li, Z = 3):):[He]2s^1;;\Delta{\text{a}}H^\circ(298\,K) = 161\,kJ\,mol^{-1};;D(M-M) = 110\,kJ\,mol^{-1};meltingpoint; melting point453.5\,K((181^\circ\text{C});boilingpoint); boiling point1615\,K;;\Delta_{\text{fus}}H^\circ = 3.0\,kJ\,mol^{-1};;IE_1 = 520.2\,kJ\,mol^{-1};;IE_2 = 7298\,kJ\,mol^{-1};;r_{\text{metal}} = 152\,pm;;r_{\text{ion}} = 76\,pm;;\Delta_{\text{hyd}}H^\circ = -519\,kJ\,mol^{-1};;\Delta_{\text{hyd}}S^\circ = -140\,J\,K^{-1}\,mol^{-1};;\Delta_{\text{hyd}}G^\circ = -477\,kJ\,mol^{-1};;E^\circ(M^+/M) = -3.04\,V;NMRisotopes:; NMR isotopes:^6Li((7.5\%,,I = 1),),^7Li((92.5\%,,I = \frac{3}{2}.\n * Sodium (Na, Z = 11):):[Ne]3s^1;;\Delta_{\text{a}}H^\circ(298\,K) = 108\,kJ\,mol^{-1};;D(M-M) = 74\,kJ\,mol^{-1};meltingpoint; melting point371.0\,K((98^\circ\text{C});boilingpoint); boiling point1156\,K;;\Delta_{\text{fus}}H^\circ = 2.6\,kJ\,mol^{-1};;IE_1 = 495.8\,kJ\,mol^{-1};;IE_2 = 4562\,kJ\,mol^{-1};;r_{\text{metal}} = 186\,pm;;r_{\text{ion}} = 102\,pm;;\Delta_{\text{hyd}}H^\circ = -404\,kJ\,mol^{-1};;\Delta_{\text{hyd}}S^\circ = -110\,J\,K^{-1}\,mol^{-1};;\Delta_{\text{hyd}}G^\circ = -371\,kJ\,mol^{-1};;E^\circ(M^+/M) = -2.71\,V;NMRisotope:; NMR isotope:^{23}Na((100\%,,I = \frac{3}{2}.\n * Potassium (K, Z = 19):):[Ar]4s^1;;\Delta_{\text{a}}H^\circ(298\,K) = 90\,kJ\,mol^{-1};;D(M-M) = 55\,kJ\,mol^{-1};meltingpoint; melting point336.0\,K((63^\circ\text{C});boilingpoint); boiling point1032\,K;;\Delta_{\text{fus}}H^\circ = 2.3\,kJ\,mol^{-1};;IE_1 = 418.8\,kJ\,mol^{-1};;IE_2 = 3052\,kJ\,mol^{-1};;r_{\text{metal}} = 227\,pm;;r_{\text{ion}} = 138\,pm;;\Delta_{\text{hyd}}H^\circ = -321\,kJ\,mol^{-1};;\Delta_{\text{hyd}}S^\circ = -70\,J\,K^{-1}\,mol^{-1};;\Delta_{\text{hyd}}G^\circ = -300\,kJ\,mol^{-1};;E^\circ(M^+/M) = -2.93\,V;NMRisotopes:; NMR isotopes:^{39}K((93.3\%,,I = \frac{3}{2}),),^{41}K((6.7\%,,I = \frac{3}{2}.\n * Rubidium (Rb, Z = 37):):[Kr]5s^1;;\Delta_{\text{a}}H^\circ(298\,K) = 82\,kJ\,mol^{-1};;D(M-M) = 49\,kJ\,mol^{-1};meltingpoint; melting point312.0\,K((39^\circ\text{C});boilingpoint); boiling point959\,K;;\Delta_{\text{fus}}H^\circ = 2.2\,kJ\,mol^{-1};;IE_1 = 403.0\,kJ\,mol^{-1};;IE_2 = 2633\,kJ\,mol^{-1};;r_{\text{metal}} = 248\,pm;;r_{\text{ion}} = 149\,pm;;\Delta_{\text{hyd}}H^\circ = -296\,kJ\,mol^{-1};;\Delta_{\text{hyd}}S^\circ = -70\,J\,K^{-1}\,mol^{-1};;\Delta_{\text{hyd}}G^\circ = -275\,kJ\,mol^{-1};;E^\circ(M^+/M) = -2.98\,V;NMRisotopes:; NMR isotopes:^{85}Rb((72.2\%,,I = \frac{5}{2}),),^{87}Rb((27.8\%,,I = \frac{3}{2}.\n * Caesium (Cs, Z = 55):):[Xe]6s^1;;\Delta_{\text{a}}H^\circ(298\,K) = 78\,kJ\,mol^{-1};;D(M-M) = 44\,kJ\,mol^{-1};meltingpoint; melting point301.5\,K((29^\circ\text{C});boilingpoint); boiling point942\,K;;\Delta_{\text{fus}}H^\circ = 2.1\,kJ\,mol^{-1};;IE_1 = 375.7\,kJ\,mol^{-1};;IE_2 = 2234\,kJ\,mol^{-1};;r_{\text{metal}} = 265\,pm;;r_{\text{ion}} = 170\,pm;;\Delta_{\text{hyd}}H^\circ = -271\,kJ\,mol^{-1};;\Delta_{\text{hyd}}S^\circ = -60\,J\,K^{-1}\,mol^{-1};;\Delta_{\text{hyd}}G^\circ = -253\,kJ\,mol^{-1};;E^\circ(M^+/M) = -3.03\,V;NMRisotope:; NMR isotope:^{133}Cs((100\%,,I = \frac{7}{2}.\n\n* **Extraction of Metallic Sodium via the Downs Process:**\n * Primary industrial mineral: Rock salt (NaCl).Extractioncannotutilizechemicalreductionwithcarbonmonoxideduetotheextremereductionpotentialof). Extraction cannot utilize chemical reduction with carbon monoxide due to the extreme reduction potential ofNa.\n * The Downs cell electrolyzes molten NaCl.Calciumchloride(. Calcium chloride (CaCl_2,uptotwo−thirdsbymass)isaddedtolowertheelectrolytemeltingpointfrom, up to two-thirds by mass) is added to lower the electrolyte melting point from803^\circ\text{C}((1076\,K)toaeutecticoperatingtemperatureof) to a eutectic operating temperature of505^\circ\text{C}((778\,K).\n * Trace metallic calcium co-deposited at the cathode is insoluble in liquid sodium and dissolves harmlessly back into the eutectic melt.\n * Electrode half-reactions:\n * Cathode (reduction): Na^+(l) + e^- \rightarrow Na(l)\n * Anode (oxidation): 2Cl^-(l) \rightarrow Cl_2(g) + 2e^-\n * Overall cell process: 2Na^+(l) + 2Cl^-(l) \rightarrow 2Na(l) + Cl_2(g)\n * Physical cell architecture must isolate cathode products (Na)fromanodeproducts() from anode products (Cl_2) via steel mesh diaphragms to prevent spontaneous, explosive recombination.\n\n* **Atomic Spectroscopy, Flame Emission, and Optical Polarimetry:**\n * Treating alkali metal salts with concentrated HClconvertsthemtovolatilechlorides.Thermalexcitationinanon−luminousBunsenflamepromotestheouterconverts them to volatile chlorides. Thermal excitation in a non-luminous Bunsen flame promotes the outerns^1 electron, emitting characteristic wavelengths upon relaxation:\n * Lithium: Crimson\n * Sodium: Yellow (Na\;D-line)\n * Potassium: Lilac\n * Rubidium: Red-violet\n * Caesium: Blue\n * Quantitative atomic absorption spectroscopy and flame photometry exploit the proportional intensity of emitted light against concentration calibration curves.\n * The monochromatic sodium D−lineisthestandardreferencesourceinpolarimetrytomeasurespecificopticalrotation(-line is the standard reference source in polarimetry to measure specific optical rotation ([\alpha]) of chiral molecules:\n * [\alpha] = \frac{\alpha}{c \times l}\n * where \alphaisobservedrotationindegrees,is observed rotation in degrees,lispolarimeterpathlengthindecimetres(is polarimeter path length in decimetres (dm),and), andcissolutionconcentrationinis solution concentration ing\,cm^{-3}.\n * Photoelectric effect: Outermost electrons in KandandCspossessworkfunctionslowenoughtobeejectedbyincidentvisiblephotons(possess work functions low enough to be ejected by incident visible photons (E = h u), enabling their application in photoelectric cells.\n\n* **Nuclear Transmutation of Potassium-40 (^{40}K):**\n * Naturally occurring potassium contains 0.02\%ofradioactiveof radioactive^{40}{19}K.\n * Decay pathways:\n * Electron capture (proton-to-neutron conversion, 11\% of events):\n * ^{40}{19}K + e^- \rightarrow {^{40}{18}Ar}\n * \beta^-decay(neutron−to−protonconversion,decay (neutron-to-proton conversion,89\% of events):\n * ^{40}{19}K \rightarrow {^{40}{20}Ca} + \beta^-\n\n* **Thermochemical Analysis of Alkali Halide Formation:**\n * Enthalpy of formation (\Delta{\text{f}}H^\circ) partitioned via a Born–Haber cycle:\n * \Delta_{\text{f}}H^\circ(MX, s) = {\Delta_{\text{a}}H^\circ(M, s) + IE_1(M, g)} + {\Delta_{\text{a}}H^\circ(X, g) + \Delta_{\text{EA}}H(X, g)} + \Delta_{\text{lattice}}H^\circ(MX, s)\n * For a given metal cation, \Delta_{\text{f}}H^\circ(MX)becomessystematicallylessnegativeintheprogressionfromfluoridetoiodide(becomes systematically less negative in the progression from fluoride to iodide (MF > MCl > MBr > MI),dominatedbythesteepdeclineinlatticeenthalpy(), dominated by the steep decline in lattice enthalpy (\Delta_{\text{lattice}}H^\circ) as the halide ionic radius expands.\n\n* **Oxides, Peroxides, Superoxides, and Breathing Apparatus Chemistry:**\n * Burning alkali metals in excess atmospheric oxygen yields distinct products controlled by cation size and lattice energy stabilization of large anions:\n * Lithium yields the normal oxide: 4Li + O_2 \rightarrow 2Li_2O\n * Sodium yields the peroxide: 2Na + O_2 \rightarrow Na_2O_2\n * Potassium, rubidium, and caesium yield paramagnetic superoxides containing the O_2^- radical ion:\n * K + O_2 \rightarrow KO_2\n * Carbon dioxide scrubbing and oxygen replenishment in submarines and space rebreathers:\n * Sodium peroxide reaction: 2Na_2O_2 + 2CO_2 \rightarrow 2Na_2CO_3 + O_2\n * Potassium superoxide reaction (superior molar oxygen regeneration):\n * 4KO_2 + 2H_2O \rightarrow 4KOH + 3O_2\n * 2KOH + CO_2 \rightarrow K_2CO_3 + H_2O\n\n* **Hydroxide Manufacturing and Coordination Complexation:**\n * Commercial sodium hydroxide (NaOH,meltingpoint, melting point591\,K) dissolves in water with extreme exothermicity. Applications include pulp and paper manufacturing, alumina extraction (Bayer process), textiles, soaps, detergents, and industrial effluent water treatment.\n * Potassium hydroxide (KOH,meltingpoint, melting point633\,K) dissolves readily in ethanol to yield reactive nucleophilic ethoxide ions, utilized in elimination reactions in organic synthesis.\n * Coordination chemistry: Large radii and low unipositive charges make alkali metal cations poor coordination partners. Lithium forms stable tetrahedral complexes ([LiX_4]) due to its small size, whereas heavier alkali metals require multidentate macrocycles (crown ethers, cryptands) or chelating agents (salicylaldehyde, acetylacetone) to generate octahedral coordination environments.\n\n* **Anomalous Properties of Lithium and Diagonal Relationship with Magnesium:**\n * The anomaly of lithium originates from its uniquely small atomic radius and high ionic charge density (e/r),givingthe), giving theLi^+ ion high polarizing power.\n * Direct combustion in air produces a stable ionic nitride (Li_3N),directlyparallelingmagnesium(), directly paralleling magnesium (Mg_3N_2), whereas heavier alkali metals do not form nitrides under ambient combustion.\n * Lithium halides and organolithium alkyls possess covalent character and dissolve readily in non-polar organic solvents (e.g., diethyl ether), matching Grignard reagents (RMgX).\n * Salts with high lattice energy demands—Li_2CO_3,,Li_3PO_4,and, andLiF—exhibitminimalaqueoussolubility,matchingequivalentmagnesiumsalts(—exhibit minimal aqueous solubility, matching equivalent magnesium salts (MgCO_3,,MgF_2).\n * Lithium hydroxide (LiOH)exhibitslowaqueoussolubility,whereas) exhibits low aqueous solubility, whereasNaOHandandKOH are deliquescent and freely soluble.\n * Hydration enthalpy: Li^+isheavilyhydrated(is heavily hydrated (\Delta_{\text{hyd}}H^\circ = -519\,kJ\,mol^{-1}),explainingitshighstandardoxidationpotential(), explaining its high standard oxidation potential (E^\circ = -3.04\,V).\n * Lithium compounds undergo thermal decomposition at lower temperatures than heavier analogues (e.g., Li_2CO_3 \rightarrow Li_2O + CO_2atmoderateheat,whereasat moderate heat, whereasNa_2CO_3 resists thermal decomposition).\n\n# Group 2: The Alkaline Earth Metals\n\n* **Mineralogy and Crustal Abundance:**\n * Calcium is the 5th and magnesium the 8th most abundant element in the Earth's continental crust; magnesium ranks 3rd in dissolved ocean water.\n * Natural minerals:\n * Beryl: Be_3Al_2[Si_6O_{18}](gemstonevarietiesincludegreenemerald,containingtraceChromium((gemstone varieties include green emerald, containing trace Chromium(III), and blue-green aquamarine)\n * Bertrandite: Be_4Si_2O_7(OH)2\n * Dolomite: CaCO_3\cdot MgCO_3\n * Magnesite: MgCO_3\n * Olivine: (Mg, Fe)_2SiO_4\n * Carnallite: KCl\cdot MgCl_2\cdot 6H_2O\n * Calcite/Aragonite: CaCO_3 (chalk, limestone, marble)\n * Gypsum: CaSO_4\cdot 2H_2O\n * Celestite: SrSO_4\n * Strontianite: SrCO_3\n * Barytes: BaSO_4\n\n![Natural emerald gemstone matrix exhibiting characteristic green beryl mineral crystallization](https://assets.knowt.com/pdf-flow-prod/6248ae11-ada9-43a6-a089-d6b311f91c24-figures/0.jpg)\n\n* **Industrial Extraction Methodologies:**\n * Large-scale thermal reduction of magnesium from dolomite:\n * Thermal calcination decomposes mixed carbonate to mixed oxides: CaCO_3\cdot MgCO_3 \xrightarrow{\Delta} CaO\cdot MgO + 2CO_2\n * Silicon reduction (Pidgeon process) in nickel alloy retorts under high vacuum:\n * 2(MgO\cdot CaO) + FeSi \rightarrow 2Mg(g) + Ca_2SiO_4 + Fe\n * Pure magnesium vaporizes and is isolated via vacuum condensation.\n * Electrolytic extraction of magnesium from seawater (Dow process):\n * Slaked lime addition: Mg^{2+}(aq) + Ca(OH)_2(s) \rightarrow Mg(OH)_2(s) + Ca^{2+}(aq)\n * Acid neutralization: Mg(OH)_2(s) + 2HCl(aq) \rightarrow MgCl_2(aq) + 2H_2O(l)\n * Dehydration at 990\,Kyieldsanhydrousyields anhydrousMgCl_2.\n * Electrolysis of molten MgCl_2 in steel cells:\n * Cathode: Mg^{2+}(l) + 2e^- \rightarrow Mg(l)\n * Anode: 2Cl^-(l) \rightarrow Cl_2(g) + 2e^-\n * Extraction of beryllium:\n * Fusion of beryl ore with sodium fluorosilicate: Be_3Al_2[Si_6O{18}] + 3Na_2SiF_6 \xrightarrow{\Delta} 3BeF_2 + 2Na_3AlF_6 + 9SiO_2\n * Water-soluble BeF_2isleachedoutandprecipitatedasis leached out and precipitated asBe(OH)2.\n * Converted to BeF_2andreducedbymagnesiumathightemperature:and reduced by magnesium at high temperature:BeF_2 + Mg \rightarrow Be + MgF_2.\n * Alternatively, electrolysis of molten BeCl_2fluxedwithfluxed withNaCl.\n * Calcium extraction: Molten electrolysis of fused CaCl_2fluxedwithfluxed withCaF_2.\n * Strontium and barium extraction: High-temperature aluminothermic reduction of oxides: 3MO + 2Al \rightarrow 3M + Al_2O_3((M = Sr, Ba), or molten chloride electrolysis.\n\n* **Commercial and Industrial Applications:**\n * Beryllium: Density 1.85\,g\,cm^{-3},meltingpoint, melting point1560\,K.Non−magneticwithhighthermalconductivity.Resistsaerialoxidationviaapassivating. Non-magnetic with high thermal conductivity. Resists aerial oxidation via a passivatingBeOfilm.Usedinmissileguidancesystems,supersonicaircraftskins,andcommunicationssatellitestructures.Lowatomicnumber(film. Used in missile guidance systems, supersonic aircraft skins, and communications satellite structures. Low atomic number (Z = 4) gives it low electron density and high X-ray transparency, making it the standard material for X-ray tube windows. Low neutron-capture cross section makes it valuable in nuclear reactor fuel claddings and neutron reflectors.\n * Magnesium market breakdown (USGS data):\n * Aluminium alloys: 60.0\%\n * Structural casting components: 18.1\%\n * Iron and steel desulfurization: 12.1\%\n * Wrought structural products: 4.2\%\n * Reducing agent (Kroll process for Ti, Zr, Hf, U, Be):):2.3\%\n * Miscellaneous: 1.9\%\n * Cathodic sacrificial protection: 1.4\%\n * Medical and chemical uses of magnesium: Antacid suspensions (milk of magnesia, Mg(OH)_2);osmoticpurgative(Epsomsalts,); osmotic purgative (Epsom salts,MgSO_4\cdot 7H_2O);Grignardreagents(); Grignard reagents (RMgX), prepared by reacting magnesium turnings with organic halides in anhydrous diethyl ether.\n * Calcium compounds: Calcining limestone yields quicklime: CaCO_3 \xrightarrow{\Delta} CaO + CO_2. Hydration produces slaked lime:\n * CaO(s) + H_2O(l) \rightarrow Ca(OH)_2(s) \quad \Delta{\text{r}}H^\circ = -65\,kJ\,mol^{-1}\n * Mortar setting involves atmospheric carbonation: Ca(OH)2(s) + CO_2(g) \rightarrow CaCO_3(s) + H_2O(l). Silica sand serves as a structural binder.\n * Bleaching powder synthesis: Ca(OH)_2 + Cl_2 \rightarrow Ca(OCl)_2\cdot Ca(OH)_2\cdot CaCl_2\cdot 2H_2O.\n * Fluorspar (CaF_2):Rawmaterialforproducinghydrofluoricacid(): Raw material for producing hydrofluoric acid (HF)andelementalfluorine() and elemental fluorine (F_2):\n * CaF_2 + 2H_2SO_4 \rightarrow 2HF + Ca(HSO_4)_2\n * Low optical dispersion and broad ultraviolet-to-infrared transmission allow CaF_2 to be fabricated into prisms and spectrophotometer optical windows.\n\n* **Physical Characteristics and Flame Colors:**\n * Beryllium and magnesium are hard, metallic grey solids; calcium, strontium, and barium are soft, silver-colored metals that tarnish rapidly in ambient air.\n * Divalent cations (M^{2+})featureclosed−shellnoblegasconfigurations() feature closed-shell noble gas configurations (ns^0), rendering their simple salts diamagnetic and colorless unless paired with colored anions.\n * Characteristic flame emission colors:\n * Calcium: Orange-red (appears pale green through cobalt blue glass)\n * Strontium: Crimson (appears violet through cobalt blue glass)\n * Barium: Apple-green\n * Group 2 ionization energies decrease monotonically from BetotoBa,butthistrendbreaksatRadium(, but this trend breaks at Radium (Ra),where), whereIE_1andandIE_2increaseslightlyduetorelativisticcontractionandstabilizationoftheincrease slightly due to relativistic contraction and stabilization of the7s subshell (inert pair effect).\n\n* **Halide Structures and Coordination:**\n * Anhydrous BeCl_2(meltingpoint(melting point688\,K,boilingpoint, boiling point793\,K)cannotbeobtainedbydehydratinghydratedsalts.Heating) cannot be obtained by dehydrating hydrated salts. Heating[Be(OH_2)_4]Cl_2 induces quantitative hydrolysis:\n * [Be(OH_2)_4]Cl_2 \xrightarrow{\Delta} Be(OH)_2 + 2HCl + 2H_2O\n * Anhydrous synthesis requires high-temperature carbochlorination of beryllium oxide:\n * BeO + C + Cl_2 \xrightarrow{900-1100\,K} BeCl_2 + CO\n * Gas-phase BeCl_2:Existsabove: Exists above1020\,Kaslinearmonomericas linear monomericCl-Be-Clmolecules(molecules (sphybridization).Atintermediatetemperatures,itformsplanardimers(hybridization). At intermediate temperatures, it forms planar dimers (Be_2Cl_4) with bridging chlorine atoms.\n\n![Extended 1D polymeric chain structure of solid beryllium chloride showing bridging chlorides and tetrahedral beryllium](https://assets.knowt.com/pdf-flow-prod/6248ae11-ada9-43a6-a089-d6b311f91c24-figures/20.png)\n\n * Crystalline solid BeCl_2:Formsaninfiniteone−dimensionalchainpolymerofcorner−sharing: Forms an infinite one-dimensional chain polymer of corner-sharingBeCl_4tetrahedracontainingcoordinatecovalentbridgingtetrahedra containing coordinate covalent bridgingBe-Cl\rightarrow Be bonds. Bond lengths in the polymer are longer than in the linear monomer.\n * Solid BeF_2:Adoptsafour−coordinatethree−dimensionaltetrahedralnetworkanalogoustothe: Adopts a four-coordinate three-dimensional tetrahedral network analogous to the\beta−cristobalitephaseofsilica(-cristobalite phase of silica (SiO_2).Molten). MoltenBeF_2 is a poor electrical conductor, confirming its covalent nature.\n\n* **Oxides, Nitrides, Carbides, and Solubility Patterns:**\n * Alkaline earth metals burn in nitrogen to form crystalline nitrides (M_3N_2), which hydrolyze to release ammonia:\n * Mg_3N_2 + 6H_2O \rightarrow 3Mg(OH)_2 + 2NH_3\n * Carbide formation: High-temperature reaction of oxides with carbon yields ionic acetylide carbides (MC_2)for) forMgthroughthroughBa,containingthe, containing the[C\equiv C]^{2-} unit:\n * CaO + 3C \xrightarrow{2300\,K} CaC_2 + CO\n * Acetylide hydrolysis generates ethyne gas:\n * CaC_2 + 2H_2O \rightarrow Ca(OH)_2 + C_2H_2\n * High-temperature nitrogenation of calcium carbide yields calcium cyanamide, a nitrogenous agricultural fertilizer:\n * CaC_2 + N_2 \xrightarrow{1300\,K} CaNCN + C\n * Beryllium carbide (Be_2C):Synthesizedfromberylliumandacetylene,itadoptsananti−fluoritecrystallatticeandhydrolyzestoreleasemethane,reflectingthesmallsizeandpolarizingpowerof): Synthesized from beryllium and acetylene, it adopts an anti-fluorite crystal lattice and hydrolyzes to release methane, reflecting the small size and polarizing power ofBe:\n * Be_2C + 4H_2O \rightarrow 2Be(OH)_2 + CH_4\n * Calcium hydride (CaH_2) is an efficient quantitative drying agent for organic solvents, reacting irreversibly with water to evolve dihydrogen:\n * CaH_2 + 2H_2O \rightarrow Ca(OH)_2 + 2H_2\n * Aqueous solubility rules for Group 2 salts:\n * All nitrates (M(NO_3)_2)andhalides() and halides (MX_2, except fluorides) are freely soluble.\n * Sulfates show declining solubility down the group: MgSO_4ishighlysoluble,is highly soluble,CaSO_4issparinglysoluble,andis sparingly soluble, andSrSO_4andandBaSO_4 are completely insoluble.\n * All carbonates (MCO_3),oxalates(), oxalates (MC_2O_4),andchromates(), and chromates (MCrO_4) are insoluble in neutral water.\n\n![Porphyrin coordination skeleton of chlorophyll featuring central coordinated magnesium ion](https://assets.knowt.com/pdf-flow-prod/6248ae11-ada9-43a6-a089-d6b311f91c24-figures/39.png)\n\n* **Coordination Chemistry and Biological Complexes:**\n * Complex stability declines down the group as ionic radii expand and charge density falls (Be^{2+} > Mg^{2+} > Ca^{2+} > Sr^{2+} > Ba^{2+}).\n * Beryllium forms stable four-coordinate tetrahedral complexes, including tetrafluoroberyllate ([BeF_4]^{2-})andbis(oxalato)beryllate() and bis(oxalato)beryllate ([Be(C_2O_4)_2]^{2-}).\n * Larger alkaline earth cations form six-coordinate octahedral or higher complexes, such as the ethylenediaminetetraacetate chelate ([Ca(EDTA)]^{2-})andthecyclictetrapyrrolecoordinationcoreofchlorophyll,where) and the cyclic tetrapyrrole coordination core of chlorophyll, whereMg^{2+} coordinates to four porphyrin nitrogen atoms.\n * Toxicity: Beryllium and all soluble barium compounds are systemic poisons. Beryllium toxicity arises from its high charge density, strong complexing ability, and capacity to displace magnesium and other essential divalent ions from enzymatic active sites.\n\n* **Anomalous Behaviour of Beryllium and Diagonal Relationship with Aluminium:**\n * Beryllium deviates from heavier Group 2 congeners and shares strong chemical similarities with aluminium (Group 13):\n * Amphoterism: Both metallic BeandandAldissolveinaqueousalkalitoliberatedihydrogen,generatingberyllate(dissolve in aqueous alkali to liberate dihydrogen, generating beryllate ([Be(OH)_4]^{2-})andaluminate() and aluminate ([Al(OH)_4]^-) ions.\n * Hydroxide amphoterism: Both Be(OH)_2andandAl(OH)_3 dissolve in both strong acids and strong bases.\n * Covalent character: Anhydrous halides, hydrides, and organometallic alkyls of both elements are covalent, volatile, and form coordinate-bridged polymers.\n * Carbide hydrolysis: Both Be_2CandandAl_4C_3yieldpuremethane(yield pure methane (CH_4)uponaqueoushydrolysis,incontrasttotheethyneproducedby) upon aqueous hydrolysis, in contrast to the ethyne produced byCaC_2.\n * Acid passivation: Both metals are passivated against corrosion upon contact with concentrated nitric acid (HNO_3), which forms a protective, insoluble surface oxide skin.\n\n# Group 13: The Boron Group\n\n* **Systematic Physical and Electronic Properties:**\n * Valence configuration: ns^2 np^1.\n * Boron (^5B):):[He]2s^2 2p^1;covalentradius; covalent radius0.82\,\text{Å};ionicradius(; ionic radius (M^{3+}))0.20\,\text{Å};;\sum{i=1}^3 IE_i = 6764\,kJ\,mol^{-1};Paulingelectronegativity; Pauling electronegativity2.05;meltingpoint; melting point2200^\circ\text{C}.\n * Aluminium (^{13}Al):):[Ne]3s^2 3p^1;covalentradius; covalent radius1.18\,\text{Å};ionicradius(; ionic radius (M^{3+}))0.52\,\text{Å};;\sum_{i=1}^3 IE_i = 5114\,kJ\,mol^{-1};Paulingelectronegativity; Pauling electronegativity1.61;meltingpoint; melting point660^\circ\text{C}.\n * Gallium (^{31}Ga):):[Ar]4s^2 3d^{10} 4p^1;covalentradius; covalent radius1.26\,\text{Å};ionicradius(; ionic radius (M^{3+}))0.60\,\text{Å};;\sum_{i=1}^3 IE_i = 5500\,kJ\,mol^{-1};Paulingelectronegativity; Pauling electronegativity1.76;meltingpoint; melting point29^\circ\text{C}.\n * Indium (^{49}In):):[Kr]5s^2 4d^{10} 5p^1;covalentradius; covalent radius1.44\,\text{Å};ionicradius(; ionic radius (M^{3+}))0.81\,\text{Å};;\sum_{i=1}^3 IE_i = 5066\,kJ\,mol^{-1};Paulingelectronegativity; Pauling electronegativity1.66;meltingpoint; melting point157^\circ\text{C}.\n * Thallium (^{81}Tl):):[Xe]6s^2 4f^{14} 5d^{10} 6p^1;covalentradius; covalent radius1.48\,\text{Å};ionicradius(; ionic radius (M^{3+}))0.95\,\text{Å};;\sum_{i=1}^3 IE_i = 5413\,kJ\,mol^{-1};Paulingelectronegativity; Pauling electronegativity1.79;meltingpoint; melting point304^\circ\text{C}.\n\n* **Inert Pair Effect and Variable Oxidation States:**\n * Group oxidation state is +3,achievedbyengagingallthreevalenceelectrons(, achieved by engaging all three valence electrons (ns^2 np^1) in covalent bonding or ionization.\n * Down the group, the +1oxidationstatestabilizes,becomingdominantatthallium.Thistrendreflectstheinertpaireffect:relativisticstabilizationandhighpromotionenergyofthevalenceoxidation state stabilizes, becoming dominant at thallium. This trend reflects the inert pair effect: relativistic stabilization and high promotion energy of the valencens^2 electrons make them resistant to participating in chemical bonding.\n * Thallium(I)() (Tl^+)isthermodynamicallystableinaqueoussolution,resemblingbothalkalimetals() is thermodynamically stable in aqueous solution, resembling both alkali metals (K^+)andsilver() and silver (Ag^+),forminganinsolublechloride(), forming an insoluble chloride (TlCl)andanalkaline,solublehydroxide() and an alkaline, soluble hydroxide (TlOH).\n * Boron exhibits only the +3oxidationstate;aluminium(oxidation state; aluminium(I) is unstable under ambient conditions.\n\n* **Dissolution Energetics of Aluminium Halides:**\n * Although converting metallic aluminium to Al^{3+}requiresalargeenergyinput(requires a large energy input (\sum_{i=1}^3 IE_i = 5114\,kJ\,mol^{-1}),anhydrousaluminiumtrichloride(), anhydrous aluminium trichloride (AlCl_3) dissolves exothermically in water.\n * Dissolution is driven by the hydration enthalpy of the small, highly charged Al^{3+}ion(ion (\Delta_{\text{hyd}}H^\circ = -4665\,kJ\,mol^{-1}),combinedwiththehydrationenthalpyofthreechlorideions(), combined with the hydration enthalpy of three chloride ions (3 \times -381\,kJ\,mol^{-1} = -1143\,kJ\,mol^{-1}),releasing), releasing-5808\,kJ\,mol^{-1} total hydration energy. This easily compensates for the initial ionization penalty.\n\n* **Boron Nitride and Organoboron Compounds:**\n * Boron nitride (BN):Isoelectronicwithelementalcarbon.Thehexagonalpolymorph(): Isoelectronic with elemental carbon. The hexagonal polymorph (h-BN)adoptsaplanarlayerednetworksimilartographite,withalternatingboronandnitrogenatomsarrangedinstackedsheets.Unlikegraphite,) adopts a planar layered network similar to graphite, with alternating boron and nitrogen atoms arranged in stacked sheets. Unlike graphite,h-BN is a white electrical insulator with a localized band gap, used as a high-temperature solid lubricant, an abrasive, for molten-metal processing crucibles, and in specialized cutting tools.\n\n![Two-dimensional hexagonal network structure of boron nitride showing alternating B and N atoms](https://assets.knowt.com/pdf-flow-prod/89c01b09-1686-48d7-905d-d96263577a48-figures/18.png)\n\n * 9-Borabicyclo[3.3.1]nonane (9-BBN): A bicyclic organoborane dimer used in synthetic organic chemistry for the regioselective and chemoselective reduction of aldehydes, ketones, alkynes, and nitriles.\n\n* **Oxides, Oxoacids, and Borate Chemistry:**\n * Boron sesquioxide (B_2O_3)isanacidicoxideobtainedbythermallydehydratingorthoboricacid.Fusing) is an acidic oxide obtained by thermally dehydrating orthoboric acid. FusingB_2O_3withtransitionmetaloxidesproducesmetaborates(with transition metal oxides produces metaborates (M(BO_2)2) with distinctive colors, providing the basis for the analytical borax bead test:\n * CoO + B_2O_3 \rightarrow Co(BO_2)_2 \quad \text{(characteristic deep blue bead)}\n * Reaction with strongly acidic oxides forms mixed phosphate-borate salts:\n * B_2O_3 + P_2O_5 \rightarrow 2BPO_4\n * Orthoboric acid (H_3BO_3ororB(OH)_3): Acts in aqueous solution as a weak, monobasic Lewis acid by accepting an electron pair from a hydroxide donor, rather than dissociating as an Arrhenius or Brønsted acid:\n * B(OH)_3 + H_2O \rightleftharpoons [B(OH)_4]^- + H^+ \quad (pK{\text{a}} = 9.25)\n\n![Hydrogen-bonded two-dimensional sheet structure of orthoboric acid formed by triangular BO3 units](https://assets.knowt.com/pdf-flow-prod/6248ae11-ada9-43a6-a089-d6b311f91c24-figures/27.png)\n\n* Solid orthoboric acid consists of symmetrical planar triangular BO_3^{3-}unitslinkedintotwo−dimensionalsheetsbyextensiveunits linked into two-dimensional sheets by extensiveO-H\cdots O hydrogen bonds.\n* Borate salts contain linked triangular [BO_3]andtetrahedraland tetrahedral[BO_4]unitsconnectedviasharedoxygenvertices,seeninpotassiumpentaborate(units connected via shared oxygen vertices, seen in potassium pentaborate (KB_5O_8\cdot 4H_2O)andcommercialborax() and commercial borax (Na_2B_4O_7\cdot 10H_2O,formulatedas, formulated asNa_2[B_4O_5(OH)4]\cdot 8H_2O).\n\n# Group 14: The Carbon Group\n\n* **Systematic Physical Properties and Trends:**\n * Valence configuration: ns^2 np^2.\n * Carbon (^6C):):[He]2s^2 2p^2;covalentradius; covalent radius0.77\,\text{Å};;IE_1 = 1086\,kJ\,mol^{-1};Paulingelectronegativity; Pauling electronegativity2.54;sublimationmeltingpoint; sublimation melting point3930^\circ\text{C}.\n * Silicon (^{14}Si):):[Ne]3s^2 3p^2;covalentradius; covalent radius1.11\,\text{Å};;IE_1 = 786\,kJ\,mol^{-1};Paulingelectronegativity; Pauling electronegativity1.92;meltingpoint; melting point1420^\circ\text{C}.\n * Germanium (^{32}Ge):):[Ar]4s^2 3d^{10} 4p^2;covalentradius; covalent radius1.22\,\text{Å};;IE_1 = 762\,kJ\,mol^{-1};Paulingelectronegativity; Pauling electronegativity1.99;meltingpoint; melting point949^\circ\text{C}.\n * Tin (^{50}Sn):):[Kr]5s^2 4d^{10} 5p^2;covalentradius; covalent radius1.40\,\text{Å};;IE_1 = 708\,kJ\,mol^{-1};Paulingelectronegativity; Pauling electronegativity1.82;meltingpoint; melting point232^\circ\text{C}.\n * Lead (^{82}Pb):):[Xe]6s^2 4f^{14} 5d^{10} 6p^2;covalentradius; covalent radius1.47\,\text{Å};;IE_1 = 716\,kJ\,mol^{-1};Paulingelectronegativity; Pauling electronegativity1.85;meltingpoint; melting point327^\circ\text{C}.\n * Physical character shifts down the group from non-metals (C, Si)toametalloid() to a metalloid (Ge)andmetals() and metals (Sn, Pb).\n * Covalent radii expand down the column, but the difference between Si((1.11\,\text{Å})and) andGe((1.22\,\text{Å})isreducedbypoorshieldingfromthefilled) is reduced by poor shielding from the filled3d^{10} subshell.\n\n* **Hybridization and Bonding Geometry in Carbon:**\n * Ground state carbon (1s^2 2s^2 2p_x^1 2p_y^1 2p_z^0)hastwounpairedelectrons.Promotinga) has two unpaired electrons. Promoting a2selectrontothevacantelectron to the vacant2p_zorbitalyieldsatetravalentexcitedstate(orbital yields a tetravalent excited state (1s^2 2s^1 2p_x^1 2p_y^1 2p_z^1).\n\n![Orbital promotion and mixing mechanism for tetrahedral sp3 hybridization](https://assets.knowt.com/pdf-flow-prod/18a34df5-fe9e-4287-8004-5f7e20b02251-figures/5.jpg)\n\n * sp^3Hybridization:OneHybridization: One2sandthreeand three2porbitalsmixtoformfourequivalenthybridorbitalsdirectedtowardtheverticesofaregulartetrahedron(bondanglesorbitals mix to form four equivalent hybrid orbitals directed toward the vertices of a regular tetrahedron (bond angles109.5^\circ),characteristicofmethane(), characteristic of methane (CH_4) and diamond.\n * sp^2Hybridization:OneHybridization: One2sandtwoand two2porbitalsmixintothreeplanartrigonalhybrids(bondanglesorbitals mix into three planar trigonal hybrids (bond angles120^\circ),leavingoneunhybridized), leaving one unhybridizedporbitalperpendiculartotheplane.Lateraloverlapoftheseunhybridizedorbital perpendicular to the plane. Lateral overlap of these unhybridizedporbitalsformsaorbitals forms a\pibond,asinethene(bond, as in ethene (H_2C=CH_2) and graphite.\n * spHybridization:OneHybridization: One2sandoneand one2porbitalmixintotwolinearhybrids(bondanglesorbital mix into two linear hybrids (bond angles180^\circ),leavingtwoorthogonalunhybridized), leaving two orthogonal unhybridizedporbitalsthatoverlaptoformtwoorthogonalorbitals that overlap to form two orthogonal\pibonds,producingatriplebondasinethyne(bonds, producing a triple bond as in ethyne (H-C\equiv C-H).\n\n* **Allotropes of Carbon and Thermodynamics:**\n * Catenation is the ability of an element to form stable, extended covalent chains or rings with itself (C-Cinhydrocarbons,in hydrocarbons,S-S in polysulfides).\n * Allotropes are distinct structural and bonding forms of the same chemical element in the same physical state.\n\n![Crystalline diamond lattice showing tetrahedral sp3-hybridized carbon atoms linked into a 3D network](https://assets.knowt.com/pdf-flow-prod/18a34df5-fe9e-4287-8004-5f7e20b02251-figures/13.jpg)\n\n * Diamond: Formed from infinite three-dimensional networks of tetrahedral sp^3carbonatoms(carbon atoms (C-Cbondlengthbond length1.54\,\text{Å}).ThisrigidcovalentnetworkgivesdiamondextremeMohshardnessandanelevatedmeltingpointof). This rigid covalent network gives diamond extreme Mohs hardness and an elevated melting point of3930^\circ\text{C}.\n * Graphite: Composed of parallel, two-dimensional planar sheets of hexagonal fused rings of sp^2carbonatoms(carbon atoms (C-Cbondlengthbond length1.42\,\text{Å}).Theinterlayerseparationis). The interlayer separation is3.35\,\text{Å},heldbyweakvanderWaalsforcesthatallowadjacentplanestoshear,givinggraphitesoft,lubricatingproperties.Delocalized, held by weak van der Waals forces that allow adjacent planes to shear, giving graphite soft, lubricating properties. Delocalized\pi electrons within the planes provide high electrical conductivity.\n * Thermodynamic metastability of diamond:\n * C(\text{diamond}) \rightarrow C(\text{graphite}) \quad \Delta{\text{r}}G^\circ(298\,K) = -2.9\,kJ\,mol^{-1}\n * Graphite is the thermodynamic standard state of carbon at 298\,Kandand1\,\text{bar}. Diamond is metastable at ambient conditions; its conversion to graphite is prevented by an enormous kinetic activation barrier.\n * Reactivity differences: Graphite oxidizes in air at 970\,K,whereasdiamondresistsoxidationupto, whereas diamond resists oxidation up to1170\,K.Treatinggraphitewithhotconcentratednitricacidyieldsmelliticacid(benzenehexacarboxylicacid,. Treating graphite with hot concentrated nitric acid yields mellitic acid (benzenehexacarboxylic acid,C_6(CO_2H)6).\n * Fluorination of graphite at 720\,Kyieldspolymericcarbonmonofluoride(yields polymeric carbon monofluoride (CF_n,where, wheren \le 1).Thiswhite,layeredmaterialresistsatmosphericoxidationbetterthangraphiteandservesasahigh−temperaturelubricant.At). This white, layered material resists atmospheric oxidation better than graphite and serves as a high-temperature lubricant. At970\,K,fluorinationyieldsmonomericcarbontetrafluoride(, fluorination yields monomeric carbon tetrafluoride (CF_4).\n\n* **Hydride and Halide Reactivity:**\n * Hydrides: Carbon forms a vast collection of stable catenated hydrocarbons. Silicon forms a limited series of silanes (Si_n H{2n+2},,n = 1-8),whicharepyrophoricinair.Germaniumformsfewergermanes,tinformsstannane(), which are pyrophoric in air. Germanium forms fewer germanes, tin forms stannane (SnH_4),andleadformsonlythethermallyunstableplumbane(), and lead forms only the thermally unstable plumbane (PbH_4).\n * Tetrahalides: Formed by all group members except PbBr_4andandPbI_4,whichdonotexistduetotheoxidativeinstabilityofheavyhalidespairedwith, which do not exist due to the oxidative instability of heavy halides paired withPb(IV).\n * Tin(IV)fluoride() fluoride (SnF_4)andlead() and lead(IV)fluoride() fluoride (PbF_4) are high-melting ionic solids, whereas other tetrahalides are volatile covalent liquids or gases.\n * Hydrolysis resistance of CX_4:Carbontetrahalidesresistaqueoushydrolysisunderambientconditionsbecausethecentralcarbonatomlacksaccessible,low−lying: Carbon tetrahalides resist aqueous hydrolysis under ambient conditions because the central carbon atom lacks accessible, low-lyingd orbitals and sterically resists nucleophilic attack by water, preventing formation of a five-coordinate transition state.\n * Silicon tetrahalide hydrolysis: Silicon tetrafluoride (SiF_4)andsilicontetrachloride() and silicon tetrachloride (SiCl_4)hydrolyzerapidlyvianucleophiliccoordinationofwaterorhydroxidetovacant) hydrolyze rapidly via nucleophilic coordination of water or hydroxide to vacant3d orbitals on silicon, forming five- and six-coordinate intermediates:\n * SiF_4 + 8OH^- \rightarrow SiO_4^{4-} + 4F^- + 4H_2O\n * SiCl_4 + 4H_2O \rightarrow Si(OH)4 + 4HCl\n * Heavier halides (GeCl_4, SnCl_4, PbCl_4) undergo incomplete, reversible aqueous hydrolysis:\n * SnCl_4 + 4H_2O \rightleftharpoons Sn(OH)_4 + 4HCl\n * In concentrated hydrochloric acid, these species coordinate chloride ions to form hexachlorometallate complexes ([SnCl_6]^{2-},,[PbCl_6]^{2-}).\n\n* **Oxides of Group 14 Elements:**\n * Carbon forms five distinct oxides: carbon monoxide (CO),carbondioxide(), carbon dioxide (CO_2),carbonsuboxide(), carbon suboxide (C_3O_2),dicarbonpentoxide(), dicarbon pentoxide (C_5O_2),andmelliticacidanhydride(), and mellitic acid anhydride (C{12}O_9).\n * Carbon monoxide (CO): A colorless, poisonous, neutral gas that is sparingly soluble in water, formed by incomplete combustion of carbon in limited oxygen. It burns exothermically in air:\n * 2CO + O_2 \rightarrow 2CO_2 \quad \Delta H = -565\,kJ\,mol^{-1}\n * Acts as an industrial reducing agent in metallurgy:\n * Fe_2O_3 + 3CO \rightarrow 2Fe + 3CO_2\n * Serves as a Lewis base \pi−acceptorligand,donatingitscarbonlonepairtotransitionmetalstoyieldzero−valentmetalcarbonylcomplexes(e.g.,-acceptor ligand, donating its carbon lone pair to transition metals to yield zero-valent metal carbonyl complexes (e.g.,Ni(CO)4,,Fe(CO)_5).\n * Carbon dioxide (CO_2):Anacidicoxide,actingastheanhydrideofcarbonicacid(): An acidic oxide, acting as the anhydride of carbonic acid (H_2CO_3), and the carbon substrate for photosynthetic fixation.\n * Silicon oxides: Silica (SiO_2)occursasquartz,cristobalite,andtridymite.Itresistschemicalattackexceptby) occurs as quartz, cristobalite, and tridymite. It resists chemical attack except byHFandmoltenalkali,andisusedtomanufactureopticallensesandUV−transparentlaboratoryglassware.Siliconmonoxide(and molten alkali, and is used to manufacture optical lenses and UV-transparent laboratory glassware. Silicon monoxide (SiO) forms only at elevated temperatures:\n * SiO_2 + Si \xrightarrow{\Delta} 2SiO\n\n* **Nitrogen Compounds of Carbon and Silicon:**\n * Cyanogen (C_2N_2):Alinearpseudohalogengas(): A linear pseudohalogen gas (N\equiv C-C\equiv N)producedbysilver−catalyzedoxidationof) produced by silver-catalyzed oxidation ofHCNinair.Measuredbonddistancesarein air. Measured bond distances are116\,pmforforC\equiv Nandand137\,pmforforC-C.\n * Silicon nitride (Si_3N_4): An advanced structural ceramic synthesized by reacting silicon with nitrogen at high temperatures, used in engine components, turbine blades, and cutting tools.\n\n* **Cyanogenic Glycosides in Plant Biochemistry:**\n * Cyanogenesis is an enzymatic defense mechanism in plants that releases toxic hydrogen cyanide (HCN) to deter herbivores and pathogens.\n * Amygdalin occurs in bitter almonds, apricot stones, peach stones, and apple seeds. Linamarin occurs in cassava roots and white clover.\n * In cassava, the plant cell wall houses the hydrolytic enzyme linamarase, physically separated from its vacuolar cyanoglucoside substrate linamarin. Mastication or mechanical maceration ruptures the cells, allowing linamarase to hydrolyze linamarin into glucose and acetone cyanohydrin (Me_2C(OH)CN),whichdecomposesrapidlyintoacetoneandfree), which decomposes rapidly into acetone and freeHCN.\n * Cassava contains 250toto900\,mg\,kg^{-1}ofofHCNdependingonwhetheritisasweetorbittercultivar.Thehumanlethaldoseisapproximatelydepending on whether it is a sweet or bitter cultivar. The human lethal dose is approximately1.0\,mg\,kg^{-1} of body mass.\n * Safe preparation of bitter cassava requires shredding, pressing, soaking, and boiling to volatilize and eliminate HCN before consumption.\n\n# Group 15: The Pnictogens\n\n* **Systematic Properties and Electronic Configurations:**\n * Valence configuration: ns^2 np^3.\n * Nitrogen (N):Formsformaloxidationstatesfrom): Forms formal oxidation states from-3toto+5(including(including-2ininN_2H_4,,-1ininNH_2OH,,+1ininN_2O,,+2ininNO,,+3ininHNO_2,,+4ininNO_2,and, and+5ininHNO_3).\n * Phosphorus (P),Arsenic(), Arsenic (As),Antimony(), Antimony (Sb),andBismuth(), and Bismuth (Bi)exhibitprimaryoxidationstatesof) exhibit primary oxidation states of+3andand+5.\n * The stability of the +3oxidationstateincreasesdownthegroup,whileoxidation state increases down the group, while+5becomesprogressivelyoxidizingduetotheinertpaireffect.Bismuth(becomes progressively oxidizing due to the inert pair effect. Bismuth(V)compounds(e.g.,) compounds (e.g.,NaBiO_3) are powerful oxidizing agents.\n\n* **Allotropy of Phosphorus:**\n * White phosphorus: An unstable, highly reactive, toxic waxy solid containing discrete tetrahedral P_4molecules.Theinternalmolecules. The internalP-P-Pbondangleisstrainedtobond angle is strained to60^\circ,deviatingfromthepreferredunhybridized, deviating from the preferred unhybridizedp−orbitalangleof-orbital angle of90^\circortetrahedralor tetrahedral109.5^\circ.Thisangularstrainmakeswhitephosphoruspyrophoricinair.Inthegasphasebelow. This angular strain makes white phosphorus pyrophoric in air. In the gas phase below800^\circ\text{C},itexistsas, it exists asP_4units;aboveunits; above800^\circ\text{C},itdissociatesinto, it dissociates intoP_2moleculescontainingaformalmolecules containing a formalP\equiv P triple bond.\n * Red phosphorus: Formed by heating white phosphorus in an inert atmosphere, yielding an amorphous polymeric network of linked phosphorus cages that is less flammable and non-toxic.\n * Black phosphorus: The thermodynamically stable allotrope, consisting of puckered, orthorhombic corrugated sheets, exhibiting semiconductor properties.\n\n* **Hydrides of Group 15 Elements:**\n * General formula: MH_3((NH_3, PH_3, AsH_3, SbH_3, BiH_3).\n * Synthesis routes:\n * Ammonia: NH_4Cl + NaOH \rightarrow NaCl + NH_3 + H_2O\n * Phosphine: Na_3P + 3H_2O \rightarrow 3NaOH + PH_3\n * Arsine and Stibine: Formed by reducing trivalent arsenic or antimony salts with zinc and aqueous acid (AsCl_3 + 3Zn + 3H^+ \rightarrow AsH_3 + 3Zn^{2+} + 3Cl^-)\n * Bismuthine: Formed by acidifying magnesium bismuthide: Mg_3Bi_2 + 6H^+ \rightarrow 2BiH_3 + 3Mg^{2+}\n * Thermal stability decreases sharply down the group (NH_3 > PH_3 > AsH_3 > SbH_3 > BiH_3). Arsine and stibine decompose into their constituent elements on moderate heating, forming metallic mirrors (Marsh test).\n * Phosphine (PH_3),arsine(), arsine (AsH_3),andstibine(), and stibine (SbH_3)aretoxic,flammablegases;impurephosphineignitesspontaneouslyinairduetotracesofdiphosphane() are toxic, flammable gases; impure phosphine ignites spontaneously in air due to traces of diphosphane (P_2H_4).\n * Molecular geometry: Hydrides adopt pyramidal geometries derived from a pseudotetrahedral arrangement of three bonding pairs and one lone pair. Down the group, the bond angle contracts toward 90^\circ:\n * NH_3 = 107.8^\circ\n * PH_3 = 93.6^\circ\n * AsH_3 = 91.8^\circ\n * SbH_3 = 91.3^\circ\n * As central atom electronegativity falls, shared bonding pairs sit further from the nucleus, allowing the localized lone pair to exert greater repulsive distortion, while bonding transitions from sp^3hybridstowardunhybridized,orthogonalhybrids toward unhybridized, orthogonalp orbitals.\n * Auxiliary nitrogen hydrides:\n * Hydrazine (N_2H_4): A basic, fuming covalent liquid. It forms mono- and di-acid salts:\n * N_2H_4 + HCl \rightarrow [N_2H_5]^+Cl^-\n * N_2H_4 + 2HCl \rightarrow [N_2H_6]^{2+}[Cl^-]_2\n * Hydroxylamine (NH_2OH): A white, thermally unstable solid with weakly basic properties.\n\n* **Halides of Group 15 Elements:**\n * Trihalides (MX_3):Formedbyallgroupmembers.Mostadoptcovalentpyramidalstructures.Bismuthtrifluoride(): Formed by all group members. Most adopt covalent pyramidal structures. Bismuth trifluoride (BiF_3)isanionicsolid,whereas) is an ionic solid, whereasBiCl_3andandSbF_3 are intermediate in character.\n * Nitrogen halides: Nitrogen trifluoride (NF_3)isanexceptionallystable,non−polargasthatresistshydrolysisatroomtemperature.Nitrogentrichloride() is an exceptionally stable, non-polar gas that resists hydrolysis at room temperature. Nitrogen trichloride (NCl_3)isanexplosive,shock−sensitiveyellowoil.Nitrogentribromide() is an explosive, shock-sensitive yellow oil. Nitrogen tribromide (NBr_3)andnitrogentriiodide() and nitrogen triiodide (NI_3)canonlybeisolatedasunstableammoniates() can only be isolated as unstable ammoniates (NBr_3\cdot 6NH_3andandNI_3\cdot 6NH_3).\n * Trihalide hydrolysis pathways depend on the central atom:\n * NCl_3 + 3H_2O \rightarrow NH_3 + 3HOCl\n * PBr_3 + 3H_2O \rightarrow H_3PO_3 + 3HBr\n * AsCl_3 + 3H_2O \rightarrow H_3AsO_3 + 3HCl\n * Antimony and bismuth trihalides hydrolyze incompletely, precipitating insoluble oxyhalide salts:\n * SbBr_3 + H_2O \rightarrow SbOBr(s) + 2HBr\n * BiCl_3 + H_2O \rightarrow BiOCl(s) + 2HCl\n * NF_3 resists hydrolysis except under extreme activation (sparking with steam):\n * 2NF_3 + 3H_2O \xrightarrow{\text{spark}} 6HF + N_2O_3\n * Pentahalides (MX_5):Formedbyphosphorus,arsenic,antimony,andbismuthastrigonalbipyramidalmolecules(): Formed by phosphorus, arsenic, antimony, and bismuth as trigonal bipyramidal molecules (sp^3dhybridization).Nitrogencannotformpentahalidesbecauseitshybridization). Nitrogen cannot form pentahalides because itsn = 2valenceshelllackslow−lyingvalence shell lacks low-lyingd orbitals.\n\n* **Oxides of Nitrogen:**\n * Nitrogen forms multiple stable oxides characterized by p\pi-p\pi multiple bonding:\n * Nitrous oxide (N_2O): Prepared by controlled thermal decomposition of molten ammonium nitrate:\n * NH_4NO_3 \xrightarrow{\Delta} N_2O + 2H_2O\n * N_2O is a neutral, unreactive, linear gas used clinically as an inhalation anaesthetic.\n * Nitric oxide (NO): Prepared by reducing dilute nitric acid with copper turnings:\n * 3Cu + 8HNO_3 \rightarrow 2NO + 3Cu(NO_3)_2 + 4H_2O\n * NOisaneutral,odd−electronradicalgaswithaformalbondorderof2.5,makingitparamagnetic.Itreactsrapidlywithoxygentoformbrownis a neutral, odd-electron radical gas with a formal bond order of 2.5, making it paramagnetic. It reacts rapidly with oxygen to form brownNO_2:\n * 2NO + O_2 \rightarrow 2NO_2\n * One-electron oxidation yields the diamagnetic nitrosonium cation (NO^+),whichhasabondorderof3.0(isoelectronicwith), which has a bond order of 3.0 (isoelectronic withN_2andandCO).).NO^+formscrystallineionicsaltssuchasforms crystalline ionic salts such as[NO]^+[BF_4]^-.\n * As a coordination ligand, NObindstotransitionmetalstoformnitrosylcomplexes,suchasthepentaaquanitrosyliron(binds to transition metals to form nitrosyl complexes, such as the pentaaquanitrosyliron(II)cation() cation ([Fe(H_2O)_5(NO)]^{2+}) in the brown-ring test for nitrates.\n * Dinitrogen pentoxide (N_2O_5): Prepared by dehydrating concentrated nitric acid with phosphorus pentoxide:\n * 2HNO_3 + P_2O_5 \rightarrow N_2O_5 + 2HPO_3\n * Solid N_2O_5isionicnitroniumnitrate(is ionic nitronium nitrate ([NO_2]^+[NO_3]^-.\n * Nitric acid production (Ostwald Process):\n * Ammonia synthesis (Haber-Bosch): N_2 + 3H_2 \xrightarrow{Fe, 200\,\text{atm}, 500^\circ\text{C}} 2NH_3\n * Catalytic oxidation: 4NH_3 + 5O_2 \xrightarrow{Pt/Rh, 5-10\,\text{atm}} 4NO + 6H_2O\n * Nitrogen dioxide formation: 2NO + O_2 \rightarrow 2NO_2\n * Absorption into water: 3NO_2 + H_2O \rightarrow 2HNO_3 + NO\n * Nitrating acid mixtures: Concentrated HNO_3andconcentratedand concentratedH_2SO_4generatetheelectrophilicnitroniumion(generate the electrophilic nitronium ion (NO_2^+), the active agent in aromatic nitration:\n * HNO_3 + 2H_2SO_4 \rightleftharpoons NO_2^+ + H_3O^+ + 2HSO_4^-\n\n* **Oxides of Phosphorus, Arsenic, Antimony, and Bismuth:**\n * Phosphorus forms cage-like dimeric oxides: phosphorus trioxide (P_4O_6)andphosphoruspentoxide() and phosphorus pentoxide (P_4O{10},whichhashighaffinityforwaterandisusedasadesiccant),alongsidemixed−valencecages(, which has high affinity for water and is used as a desiccant), alongside mixed-valence cages (P_4O_8, P_4O_9).\n * Arsenic and antimony form cage dimers: As_4O_6, As_4O_{10}, Sb_4O_{10}.\n * Bismuth forms only bismuth(III)oxide() oxide (Bi_2O_3).\n * Oxide acid-base character becomes progressively more basic down the group: P_4O_6andandAs_4O_6areacidic,are acidic,Sb_4O_6isamphoteric,andis amphoteric, andBi_2O_3 is purely basic.\n\n* **Phosphorus Oxoacids and Industrial Applications:**\n * Phosphoric acid series (oxidation state +5, non-reducing):\n * Orthophosphoric acid (H_3PO_4):Triproticacidcontainingthree): Triprotic acid containing three-OHgroupsandoneterminalphosphorylgroups and one terminal phosphorylP=O bond.\n * Pyrophosphoric acid (H_4P_2O_7):Formedbycondensingtwoorthophosphoricacidmoleculesviaabridgingoxygen(): Formed by condensing two orthophosphoric acid molecules via a bridging oxygen (P-O-P).\n * Phosphorous acid series (oxidation state +3, reducing):\n * Orthophosphorous acid (H_3PO_3):Adiproticacidcontainingonenon−ionizable,directlybondedhydrogenatom(): A diprotic acid containing one non-ionizable, directly bonded hydrogen atom (P-H),twoionizable), two ionizable-OHgroups,andoneterminalgroups, and one terminalP=O bond.\n * Pyrophosphorous acid (H_4P_2O_5):Containstwo): Contains twoP-Hbondsandaninternalbonds and an internalP-O-P linkage.\n * Industrial production of orthophosphoric acid from fluorapatite/rock phosphate:\n * 2Ca_3(PO_4)2 + 6H_2SO_4 \rightarrow 4H_3PO_4 + 6CaSO_4\n * Primary industrial uses of phosphate salts:\n * Agricultural chemical fertilizers (e.g., ammonium phosphates, superphosphates).\n * Detergent builders (sodium tripolyphosphate, Na_5P_3O{10}, to sequester divalent ions).\n * Nutritional mineral animal feeds.\n * Industrial municipal water softening.\n * Organophosphate insecticides and pest control agents.\n\n* **Biological Roles of Phosphates and Toxic Arsenic Substitution:**\n * Genetic structural backbone: DNA and RNA are polynucleotide chains linked by phosphodiester bridges between the 3'andand5' positions of adjacent ribose or deoxyribose sugars.\n * Natural DNA forms include right-handed B-DNA, compact right-handed A-DNA, and left-handed Z-DNA.\n * Mineralized skeletal tissue: Bones and teeth consist of collagen protein reinforced with crystalline hydroxyapatite, Ca_5(OH)(PO_4)3.\n * Hydroxyapatite is susceptible to acid demineralization by oral bacteria. Fluoridation converts it to fluoroapatite, which resists acid dissolution:\n * Ca_5(OH)(PO_4)_3 + F^- \rightarrow Ca_5F(PO_4)_3 + OH^-\n * Bioenergetics: Adenosine triphosphate (ATP) contains adenine, ribose, and three linked phosphate units. Cellular hydrolysis of ATP to adenosine diphosphate (ADP) releases free energy under physiological conditions (pH = 7.4,,[CO_2] = 10^{-5}\,mol\,dm^{-3}):\n * [ATP]^{4-} + 2H_2O \rightarrow [ADP]^{3-} + [HPO_4]^{2-} + [H_3O]^+ \quad \Delta G \approx -40\,kJ\,mol^{-1}\n * Arsenate replacement: The GFAJ-1 bacterial strain isolated from hypersaline, alkaline Mono Lake, California, was reported in 2011 to tolerate high levels of arsenate (AsO_4^{3-}), with evidence suggesting structural substitution of arsenic for phosphorus in its biomolecules.\n\n# Group 16: The Chalcogens\n\n* **Systematic Properties and Electronic Configurations:**\n * Valence configuration: ns^2 np^4.\n * Oxygen (^8O):):[He]2s^2 2p^4;covalentradius; covalent radius0.74\,\text{Å};;IE_1 = 1314.0\,kJ\,mol^{-1};Paulingelectronegativity; Pauling electronegativity3.61;boilingpoint; boiling point-183.0^\circ\text{C}.\n * Sulfur (^{16}S):):[Ne]3s^2 3p^4;covalentradius; covalent radius1.04\,\text{Å};;IE_1 = 999.6\,kJ\,mol^{-1};Paulingelectronegativity; Pauling electronegativity2.59;meltingpoint; melting point112.8^\circ\text{C}((\alpha-S_8).\n * Selenium (^{34}Se):):[Ar]4s^2 3d^{10} 4p^4;covalentradius; covalent radius1.14\,\text{Å};;IE_1 = 940.9\,kJ\,mol^{-1};Paulingelectronegativity; Pauling electronegativity2.42;meltingpoint; melting point217.0^\circ\text{C}.\n * Tellurium (^{52}Te):):[Kr]5s^2 4d^{10} 5p^4;covalentradius; covalent radius1.37\,\text{Å};;IE_1 = 869.2\,kJ\,mol^{-1};Paulingelectronegativity; Pauling electronegativity2.16;meltingpoint; melting point452.0^\circ\text{C}.\n * Polonium (^{84}Po):):[Xe]6s^2 4f^{14} 5d^{10} 6p^4;covalentradius; covalent radius1.46\,\text{Å};;IE_1 = 812.0\,kJ\,mol^{-1};Paulingelectronegativity; Pauling electronegativity1.19;meltingpoint; melting point246-254^\circ\text{C}.\n * Oxygen, sulfur, selenium, and tellurium are non-metals or metalloids; radioactive polonium is a metallic conductor.\n * Oxidation states range from -2toto+6.Oxygenisrestrictedto. Oxygen is restricted to-2(except(except-1inperoxideslikein peroxides likeH_2O_2,andpositivestatesinfluorinecompoundssuchas, and positive states in fluorine compounds such asOF_2).Sulfur,selenium,andtelluriumexhibit). Sulfur, selenium, and tellurium exhibit-2, +2, +4,and, and+6,whereaspoloniumformsonly, whereas polonium forms only+2andand+4.\n\n![Molecular orbital energy level diagram of ground state triplet dioxygen](https://assets.knowt.com/pdf-flow-prod/20084cdc-0074-43f9-a547-bcf2c42efb41-figures/21.png)\n\n* **Molecular Orbital Structure of Dioxygen (O_2):**\n * Dioxygen is a colorless gas that condenses to a pale blue liquid (90.2\,K)andpalebluesolid() and pale blue solid (54.4\,K).\n * Ground-state valence electron configuration:\n * (\sigma{2s})^2 (\sigma^{2s})^2 (\sigma{2p_z})^2 (\pi_{2p_x})^2 (\pi_{2p_y})^2 (\pi^{2p_x})^1 (\pi^{2p_y})^1\n * Bond order is \frac{8 - 6}{2} = 2.0.\n * In accordance with Hund's rule, the two highest-energy electrons occupy the degenerate \pi^{2p_x}andand\pi^*{2p_y}antibondingorbitalswithparallelspins,producingaparamagnetictripletgroundstate(antibonding orbitals with parallel spins, producing a paramagnetic triplet ground state (^3\Sigma_g^-$).

  • Biological Transport via Haem Proteins:

    • In mammalian blood, dioxygen is transported by haemoglobin and stored in muscle tissue by myoglobin.

    • The active site consists of a protoporphyrin IX macrocycle coordinating a central iron(IIII) ion, tethered to a histidine residue on the globin protein chain.

    • In the deoxygenated resting state (deoxy-haemoglobin), the five-coordinate high-spin Fe(II)Fe(II) center adopts a square-based pyramidal geometry, resting out of the porphyrin plane.

    • Dioxygen binds trans to the axial histidine residue, converting the complex to a six-coordinate octahedral low-spin adduct, pulling the iron atom into the porphyrin plane.

  • Ozone (O3O_3) Structure, Thermodynamics, and Atmospheric Chemistry:

    • Ozone is an unstable bent molecule (bond angle 116.8∘116.8^\circ, O−OO-O bond length 1.28 A˚1.28\,\text{Å}) formed by silent electrical discharges in an ozonizer or via solar UV photolysis of O2O_2:

    • O2+hν→2OO_2 + h\nu \rightarrow 2O

  • O+O2→O3O + O_2 \rightarrow O_3

  • Ozone condenses to a dark blue, explosive liquid (boiling point 163 K163\,K). It is strongly endothermic:

  • 32O2(g)→O3(g)ΔfH∘(298 K)=+142.7 kJ mol−1\frac{3}{2}O_2(g) \rightarrow O_3(g) \quad \Delta_{\text{f}}H^\circ(298\,K) = +142.7\,kJ\,mol^{-1}

  • Ozone is a strong oxidizer in acidic aqueous media:

  • O3(g)+2H+(aq)+2e−⇌O2(g)+H2O(l)E∘=+2.07 VO_3(g) + 2H^+(aq) + 2e^- \rightleftharpoons O_2(g) + H_2O(l) \quad E^\circ = +2.07\,V

  • Stratospheric ozone (15−30 km15-30\,km altitude) screens out harmful solar UV radiation (200−320 nm200-320\,nm).

  • Catalytic destruction by chlorofluorocarbons (CFCs):

    • CF2Cl2+hν→⋅CF2Cl+Cl⋅CF_2Cl_2 + h\nu \rightarrow \cdot CF_2Cl + Cl^\cdot

    • Cl⋅+O3→ClO⋅+O2Cl^\cdot + O_3 \rightarrow ClO^\cdot + O_2

    • ClO⋅+O→Cl⋅+O2ClO^\cdot + O \rightarrow Cl^\cdot + O_2

    • Overall reaction: O3+O→2O2O_3 + O \rightarrow 2O_2

  • Dimers also participate in catalytic cycles:

  • 2ClO⋅→Cl2O22ClO^\cdot \rightarrow Cl_2O_2

  • Cl2O2+hν→Cl⋅+ClOO⋅Cl_2O_2 + h\nu \rightarrow Cl^\cdot + ClOO^\cdot

    • ClOO⋅→Cl⋅+O2ClOO^\cdot \rightarrow Cl^\cdot + O_2

    • 2Cl⋅+2O3→2ClO⋅+2O22Cl^\cdot + 2O_3 \rightarrow 2ClO^\cdot + 2O_2

    • The 1987 Montreal Protocol phased out chlorofluorocarbon propellants by 1996 in developed nations and by 2010 globally, replacing them with hydrofluoroalkanes (HFAs) in medical inhalers.

  • Hydrogen Peroxide (H2O2H_2O_2) Manufacturing:

    • Historical synthesis relied on the reaction of barium peroxide with sulfuric acid, or on the electrolytic oxidation of bisulfate ([HSO4]−[HSO_4]^-) to peroxydisulfate ([S2O8]2−[S_2O_8]^{2-}) at platinum anodes, followed by hydrolysis:

    • [S2O8]2−+2H2O→2[HSO4]−+H2O2[S_2O_8]^{2-} + 2H_2O \rightarrow 2[HSO_4]^- + H_2O_2

    • Modern manufacturing utilizes the anthraquinone auto-oxidation process, cycling 2-ethylanthraquinol. Catalytic hydrogenation with dihydrogen over a palladium catalyst regenerates the quinol, which is then oxidized by air to yield H2O2H_2O_2 and regenerate the quinone.

  • Oxides of Sulfur, Selenium, and Tellurium:

    • Sulfur dioxide (SO2SO_2): A colorless, choking gas (boiling point 263 K263\,K) produced by burning sulfur, roasting sulfide ores (2ZnS+3O2→2ZnO+2SO22ZnS + 3O_2 \rightarrow 2ZnO + 2SO_2), or reducing calcium sulfate. It dissolves in water to form dissolved SO2⋅xH2OSO_2\cdot xH_2O; free sulfurous acid (H2SO3H_2SO_3) cannot be isolated in pure form.

    • Lower sulfur oxides: Disulfur monoxide (S2OS_2O), cyclooctasulfur monoxide (S8OS_8O), and polysulfur oxides (SnOS_nO, n=6−10n = 6-10):

    • SOCl2+Ag2S→430 KS2O+2AgClSOCl_2 + Ag_2S \xrightarrow{430\,K} S_2O + 2AgCl

    • HS7H+SOCl2→S8O+2HClHS_7H + SOCl_2 \rightarrow S_8O + 2HCl

    • S8+CF3C(O)OOH→S8O+CF3COOHS_8 + CF_3C(O)OOH \rightarrow S_8O + CF_3COOH

    • Sulfur trioxide (SO3SO_3): A strong Lewis acid produced by catalytic oxidation of SO2SO_2 over a platinum or vanadium pentoxide (V2O5V_2O_5) catalyst:

    • 2SO2+O2→V2O52SO32SO_2 + O_2 \xrightarrow{V_2O_5} 2SO_3

    • Reactions of SO3SO_3:

    • With hydrogen halides: SO3+HX→HSO3XSO_3 + HX \rightarrow HSO_3X (X=F,ClX = F, Cl

    • With Lewis bases: SO3+L→L⋅SO3SO_3 + L \rightarrow L\cdot SO_3 (L=pyridine,PPh3L = \text{pyridine}, PPh_3

    • With water: SO3+H2O→H2SO4SO_3 + H_2O \rightarrow H_2SO_4

    • Selenium dioxide (SeO2SeO_2): A white, toxic solid that sublimes at 588 K588\,K. The crystalline state consists of infinite, non-planar one-dimensional polymeric chains of trigonal pyramidal selenium centers linked by bridging oxygen atoms (Se−O−SeSe-O-Se angle 125∘125^\circ, terminal Se=OSe=O angle 98∘98^\circ). It dissolves in water to form crystalline selenious acid (H2SeO3H_2SeO_3), and serves as an oxidant in organic chemistry (e.g., allylic oxidations).

    • Tellurium dioxide (TeO2TeO_2): An involatile solid (melting point 1006 K1006\,K). The synthetic polymorph is α−TeO2\alpha-TeO_2, while β−TeO2\beta-TeO_2 occurs as the mineral tellurite, both containing linked, four-coordinate pseudotrigonal bipyramidal [TeO4][TeO_4] units. It is insoluble in pure water but dissolves in both acids and alkalis, demonstrating amphoterism.

  • Oxoacids of Sulfur and Their Systematic Taxonomy:

    • Sulfuric acid (H2SO4H_2SO_4): Produced industrially via the Contact Process (SO2→SO3SO_2 \rightarrow SO_3, followed by absorption into concentrated H2SO4H_2SO_4 to form oleum, H2S2O7H_2S_2O_7, which is diluted with water). Pure H2SO4H_2SO_4 is a viscous liquid freezing at 10.37∘C10.37^\circ\text{C}. A strong dibasic acid, it undergoes two sequential aqueous deprotonations:

    • H2SO4+H2O→[HSO4]−+[H3O]+(pKa1 strongly negative)H_2SO_4 + H_2O \rightarrow [HSO_4]^- + [H_3O]^+ \quad (pK_{\text{a}1} \text{ strongly negative})

    • [HSO4]−+H2O⇌[SO4]2−+[H3O]+(pKa2=1.99)[HSO_4]^- + H_2O \rightleftharpoons [SO_4]^{2-} + [H_3O]^+ \quad (pK_{\text{a}2} = 1.99)

    • Concentrated H2SO4H_2SO_4 is a powerful dehydrating agent, rapidly charring carbohydrates and organic matter:

    • C12H22O11→conc. H2SO412C(s)+11H2OC_{12}H_{22}O_{11} \xrightarrow{\text{conc. } H_2SO_4} 12C(s) + 11H_2O

    • Disulfuric acid (pyrosulfuric acid / oleum, H2S2O7H_2S_2O_7): Oxidation state +6+6, formed by adding SO3SO_3 directly to H2SO4H_2SO_4.

    • Thiosulfuric acid (H2S2O3H_2S_2O_3): Contains a central sulfur in formal oxidation state +5+5 (or +6+6) and a terminal sulfide-like sulfur in oxidation state −1-1 (or −2-2).

    • Peroxomonosulfuric acid (Caro's acid, H2SO5H_2SO_5): Formed by hydrolyzing peroxodisulfuric acid, containing an active −O−O−H-O-O-H peroxo group.

    • Peroxodisulfuric acid (Marshall's acid, H2S2O8H_2S_2O_8): Prepared by high-current electrolytic oxidation of aqueous sulfuric acid or bisulfate salts. Persulfate salts (e.g., (NH4)2S2O8(NH_4)_2S_2O_8) serve as radical initiators for the industrial polymerization of vinyl acetate and tetrafluoroethylene (PTFEPTFE).

    • Dithionic acid (H2S2O6H_2S_2O_6): Contains a central S−SS-S single bond between two sulfonate groups (oxidation state +5+5), prepared by oxidizing cold sulfurous acid with manganese dioxide (MnO2MnO_2):

    • MnO2+2H2SO3→MnS2O6+2H2OMnO_2 + 2H_2SO_3 \rightarrow MnS_2O_6 + 2H_2O

    • Polythionic acids (H2Sn+2O6H_2S_{n+2}O_6): Feature linear catenated sulfur chains of varying length (−(S)n−-(S)_n-) terminated by sulfonate groups.

    • Sulfurous acid (H2SO3H_2SO_3): Oxidation state +4+4. Known in aqueous equilibria with dissolved SO2SO_2, forming stable sulfite ([SO3]2−[SO_3]^{2-}) and bisulfite ([HSO3]−[HSO_3]^-) salts.

    • Disulfurous acid (H2S2O5H_2S_2O_5): Known as the pyrosulfite/metabisulfite anion ([S2O5]2−[S_2O_5]^{2-}, formal mixed oxidation states +5+5 and +3+3), containing an unsymmetrical S−SS-S bond between a planar SO2SO_2 unit and a pyramidal SO3SO_3 unit.

    • Dithionous acid (H2S2O4H_2S_2O_4): Oxidation state +3+3, featuring an elongated, eclipsed central S−SS-S bond with high reducing activity, used industrially as a textile bleaching and reduction agent.

Industrial Commodities and Halogenated Flame Retardants

  • Top Main-Group Industrial Chemical Commodities:

    • 1. Sodium chloride (NaClNaCl

    • 2. Sulfuric acid (H2SO4H_2SO_4

    • 3. Phosphate rock (MPO4MPO_4

    • 4. Nitrogen (N2N_2

    • 5. Ethylene (CH2=CH2CH_2=CH_2

    • 6. Oxygen (O2O_2

    • 7. Lime (CaOCaO

    • 8. Propylene (CH2=CH−CH3CH_2=CH-CH_3

    • 9. Ammonia (NH3NH_3


    1. Chlorine (Cl2Cl_2


    1. Phosphoric acid (H3PO4H_3PO_4


    1. Sodium carbonate (Na2CO3Na_2CO_3, Solvay process, soda-lime glass manufacturing)


    1. Sodium hydroxide (NaOHNaOH


    1. 1,2-Dichloroethane (ClCH2−CH2ClClCH_2-CH_2Cl, vinyl chloride precursor)


    1. Elemental sulfur (S8S_8


    1. Nitric acid (HNO3HNO_3


    1. Ammonium nitrate (NH4NO3NH_4NO_3


    1. Benzene (C6H6C_6H_6


    1. Urea ((NH2)2C=O(NH_2)_2C=O


    1. Ethylbenzene (C2H5C6H5C_2H_5C_6H_5, styrene monomer precursor)

Giant gypsum selenite crystals discovered within the underground Naica mine system
  • Mineral Formations:

    • Megacrystalline gypsum (CaSO4⋅2H2OCaSO_4\cdot 2H_2O) forms selenite crystal pillars up to 11 metres long inside the hydrothermal caves of the Naica mine system in Chihuahua, Mexico.

Molecular chemical structure of the major brominated flame retardant TBBPA
  • Halogenated Organic Flame Retardant Technology:

    • Flame retardants are additives blended into polymeric plastics, synthetic textiles, polyurethane foams, and printed electronic circuit boards to suppress polymer combustion. United States industrial demand reached approximately US $1.3 billion\text{US}\,\$1.3\text{ billion} in 2008.

    • High-volume commercial brominated organic flame retardants include:

    • Decabromodiphenyl ether (deca-BDE, (C6Br5)2O(C_6Br_5)_2O

    • 1,2,5,6,9,10-Hexabromocyclododecane (HBCD)

    • Tetrabromobisphenol A (TBBPA)

    • Octabromodiphenyl ether (octa-BDE)

    • Pentabromodiphenyl ether (penta-BDE)

    • Polybrominated biphenyl derivatives (PBBs)

    • Brominated epoxy resins and polycarbonates

    • Sulfamic acid (H2NSO3HH_2NSO_3H): A crystalline organosulfur monoamide used as a descaling agent, chemical cleaning agent, and flame-retardant precursor.

    • Boric acid (H3BO3H_3BO_3): Formulated as a powder insecticide to control cockroaches, silverfish, and ants by disrupting insect cuticular waxes and acting as a metabolic poison.

Review Exercises and Worked Problems

  • Exercise 1: Anion Versus Neutral Atomic Size

    • Question: What occurs to the overall size of an atom when one or more electrons are introduced to form an anion, and what physical factors govern this response?

    • Answer: Adding electrons decreases the effective nuclear charge felt per electron and increases valence-shell electron-electron repulsion. The electron cloud expands outward, making the resulting negative ion substantially larger than the neutral atom. For example, the non-bonded van der Waals radius of a neutral chlorine atom is 1.40 A˚1.40\,\text{Å} (140 pm140\,pm), whereas the ionic radius of the chloride anion (Cl−Cl^-) expands to 1.81 A˚1.81\,\text{Å} (181 pm181\,pm).

  • Exercise 2: Worked Estimation of Bond Dissociation Enthalpy for Br−FBr-F

    • Given parameters: D(F−F)=158 kJ mol−1D(F-F) = 158\,kJ\,mol^{-1}; D(Br−Br)=224 kJ mol−1D(Br-Br) = 224\,kJ\,mol^{-1}; χP(F)=4.0\chi^P(F) = 4.0; χP(Br)=3.0\chi^P(Br) = 3.0.

    • Step 1: Calculate electronegativity difference:

    • ΔD=χP(F)−χP(Br)=4.0−3.0=1.0\sqrt{\Delta D} = \chi^P(F) - \chi^P(Br) = 4.0 - 3.0 = 1.0

    • ΔD=(1.0)2=1.0 eV\Delta D = (1.0)^2 = 1.0\,eV

    • Step 2: Convert energy to kilojoules per mole:

    • 1.0 eV≈96.5 kJ mol−11.0\,eV \approx 96.5\,kJ\,mol^{-1}

    • Step 3: Apply the Pauling estimation relationship:

    • D(Br−F)=ΔD+12[D(Br−Br)+D(F−F)]D(Br-F) = \Delta D + \frac{1}{2} [D(Br-Br) + D(F-F)]

    • D(Br−F)=96.5+12[224+158]=96.5+191=287.5 kJ mol−1D(Br-F) = 96.5 + \frac{1}{2} [224 + 158] = 96.5 + 191 = 287.5\,kJ\,mol^{-1}

    • Step 4: Comparison with experiment:

    • The calculated value of 287.5 kJ mol−1287.5\,kJ\,mol^{-1} overestimates the experimental value of 250.2 kJ mol−1250.2\,kJ\,mol^{-1}, reflecting the limitations of Pauling's simple arithmetic mean formulation.

  • Exercise 3: Estimation of Bond Dissociation Enthalpy for Br−ClBr-Cl

    • Given parameters: D(Br−Br)=224 kJ mol−1D(Br-Br) = 224\,kJ\,mol^{-1}; D(Cl−Cl)=242 kJ mol−1D(Cl-Cl) = 242\,kJ\,mol^{-1}; χP(Br)=3.0\chi^P(Br) = 3.0; χP(Cl)=3.2\chi^P(Cl) = 3.2.

    • Step 1: Calculate electronegativity difference:

    • ΔD=3.2−3.0=0.2\sqrt{\Delta D} = 3.2 - 3.0 = 0.2

    • ΔD=(0.2)2=0.04 eV\Delta D = (0.2)^2 = 0.04\,eV

    • Step 2: Convert energy to kilojoules per mole:

    • ΔD=0.04×96.5=3.86 kJ mol−1\Delta D = 0.04 \times 96.5 = 3.86\,kJ\,mol^{-1}

    • Step 3: Estimate bond dissociation enthalpy:

    • D(Br−Cl)=3.86+12[224+242]=3.86+233=236.86 kJ mol−1≈237 kJ mol−1D(Br-Cl) = 3.86 + \frac{1}{2} [224 + 242] = 3.86 + 233 = 236.86\,kJ\,mol^{-1} \approx 237\,kJ\,mol^{-1}

    • Experimental comparison: Experimental bond dissociation energy is 218 kJ mol−1218\,kJ\,mol^{-1}.

  • Exercise 4: Estimation of Bond Dissociation Enthalpy for H−FH-F

    • Given parameters: D(H−H)=436 kJ mol−1D(H-H) = 436\,kJ\,mol^{-1}; D(F−F)=158 kJ mol−1D(F-F) = 158\,kJ\,mol^{-1}; χP(H)=2.2\chi^P(H) = 2.2; χP(F)=4.0\chi^P(F) = 4.0.

    • Step 1: Calculate electronegativity difference:

    • ΔD=4.0−2.2=1.8\sqrt{\Delta D} = 4.0 - 2.2 = 1.8

    • ΔD=(1.8)2=3.24 eV\Delta D = (1.8)^2 = 3.24\,eV

    • Step 2: Convert energy to kilojoules per mole:

    • ΔD=3.24×96.5=312.66 kJ mol−1\Delta D = 3.24 \times 96.5 = 312.66\,kJ\,mol^{-1}

    • Step 3: Estimate bond dissociation enthalpy:

    • D(H−F)=312.66+12[436+158]=312.66+297=609.66 kJ mol−1≈610 kJ mol−1D(H-F) = 312.66 + \frac{1}{2} [436 + 158] = 312.66 + 297 = 609.66\,kJ\,mol^{-1} \approx 610\,kJ\,mol^{-1}

    • Experimental comparison: Experimental bond dissociation energy is 570 kJ mol−1570\,kJ\,mol^{-1}.

  • Exercise 5: Estimation of Bond Dissociation Enthalpy for I−ClI-Cl

    • Given parameters: D(I−I)=151 kJ mol−1D(I-I) = 151\,kJ\,mol^{-1}; D(Cl−Cl)=242 kJ mol−1D(Cl-Cl) = 242\,kJ\,mol^{-1}; χP(I)=2.7\chi^P(I) = 2.7; χP(Cl)=3.2\chi^P(Cl) = 3.2.

    • Step 1: Calculate electronegativity difference:

    • ΔD=3.2−2.7=0.5\sqrt{\Delta D} = 3.2 - 2.7 = 0.5

    • ΔD=(0.5)2=0.25 eV\Delta D = (0.5)^2 = 0.25\,eV

    • Step 2: Convert energy to kilojoules per mole:

    • ΔD=0.25×96.5=24.13 kJ mol−1\Delta D = 0.25 \times 96.5 = 24.13\,kJ\,mol^{-1}

    • Step 3: Estimate bond dissociation enthalpy:

    • D(I−Cl)=24.13+12[151+242]=24.13+196.5=220.63 kJ mol−1≈221 kJ mol−1D(I-Cl) = 24.13 + \frac{1}{2} [151 + 242] = 24.13 + 196.5 = 220.63\,kJ\,mol^{-1} \approx 221\,kJ\,mol^{-1}

  • Exercise 6: Theoretical Evaluation of Hydrogen Halides

    • Given parameters: Experimental bond dissociation enthalpies D(H−X)D(H-X) are 432 kJ mol−1432\,kJ\,mol^{-1} for HClHCl, 366 kJ mol−1366\,kJ\,mol^{-1} for HBrHBr, and 298 kJ mol−1298\,kJ\,mol^{-1} for HIHI.

    • Comparative analysis: Bond strength decreases steadily down the halogen group (HF>HCl>HBr>HIHF > HCl > HBr > HI) as the halogen covalent radius expands (F=71 pmF = 71\,pm, Cl=99 pmCl = 99\,pm, Br=114 pmBr = 114\,pm, I=133 pmI = 133\,pm). The larger diffuse pp orbitals on the heavier halogens overlap less effectively with the compact 1s1s orbital of hydrogen, lengthening the bond and lowering the bond dissociation energy.