Aqueous Solutions and Concentrations

Fundamentals and Characteristics of Solutions

  • Definition of a Solution:

    • A solution is a homogeneous mixture (mélange homogène) formed by the combination of a solvent and one or more solutes.
    • Solvent (Solvant): The predominantly present chemical species (major component) in which other chemical species are dissolved.
    • Solute (Soluté): The chemical species present in lesser amounts (minor components) that are dissolved by the solvent.
    • Fundamental Composition Relationship:Solvent+Solute=Solution\text{Solvent} + \text{Solute} = \text{Solution}
  • Aqueous Solutions (Solutions Aqueuses):

    • A solution is classified specifically as an aqueous solution when the solvent is water (eau\text{eau}).
  • Nature of Dissolved Solutes:

    • Dissolved solutes can be ionic, molecular, or a combination of both.
    • Ionic Solutes: When an ionic solid dissolves, its crystal lattice dissociates into hydrated ions. For example, solid sodium chloride (NaClNaCl) crystals dissolve in water and dissociate into sodium cations and chloride anions:         NaCl(s)→Na(aq)++Cl(aq)−NaCl_{(s)} \rightarrow Na^+_{(aq)} + Cl^-_{(aq)}
    • Molecular Solutes: When a molecular solid dissolves, the individual molecules disperse uniformly throughout the solvent without breaking into ions. For example, solid diiodine (I2I_2) dissolves in water to form aqueous diiodine molecules:         I2(s)→I2(aq)I_{2(s)} \rightarrow I_{2(aq)}

Mass Concentration and Physical Quantities

  • Definition of Mass Concentration:

    • The mass concentration (CmC_m), also designated as mass titer (tt), of a dissolved chemical species represents the ratio of the mass of dissolved solute (msoluteˊm_{\text{soluté}}) to the total volume of the resulting solution (VsolutionV_{\text{solution}}).
    • It quantifies the quantity of solute distributed per unit volume of solution.
    • Mathematical Expression:Cm=msoluteˊVsolutionC_m = \frac{m_{\text{soluté}}}{V_{\text{solution}}}t=msoluteˊVsolutiont = \frac{m_{\text{soluté}}}{V_{\text{solution}}}
    • Standard Units:
      • Mass of solute (msoluteˊm_{\text{soluté}}): grams (gg)
      • Volume of solution (VsolutionV_{\text{solution}}): liters (LL)
      • Mass concentration (CmC_m or tt): grams per liter (g L−1g\,L^{-1})
  • Distinction Between Mass Concentration and Volumetric Mass (Density):

    • Mass concentration (tt or CmC_m) must never be confused with the solution's volumetric mass (ρsolution\rho_{\text{solution}}).
    • Volumetric Mass of the Solution: Ratio of the mass of the entire solution to the volume of the solution:         ρsolution=msolutionVsolution\rho_{\text{solution}} = \frac{m_{\text{solution}}}{V_{\text{solution}}}
    • Mass Concentration of the Solute: Ratio of the mass of the dissolved solute alone to the volume of the solution:         t=msoluteˊVsolutiont = \frac{m_{\text{soluté}}}{V_{\text{solution}}}
    • Because the total mass of the solution exceeds the mass of the solute (msolution>msoluteˊm_{\text{solution}} > m_{\text{soluté}}), the values represent distinct physical parameters:         ρsolution≠t\rho_{\text{solution}} \neq t
  • Comparative Example: Sodium Chloride (NaClNaCl) Solutions:

    • Three solutions (AA, BB, and CC) are prepared using an identical solution volume of VA=VB=VC=100 mL=0.100 LV_A = V_B = V_C = 100\,\text{mL} = 0.100\,L:
      • Solution A: Prepared with mass mA=0.09 gm_A = 0.09\,gCm(A)=mAVA=0.09 g0.100 L=0.90 g L−1C_m(A) = \frac{m_A}{V_A} = \frac{0.09\,g}{0.100\,L} = 0.90\,g\,L^{-1}
      • Solution B: Prepared with mass mB=2.0 gm_B = 2.0\,gCm(B)=mBVB=2.0 g0.100 L=20 g L−1C_m(B) = \frac{m_B}{V_B} = \frac{2.0\,g}{0.100\,L} = 20\,g\,L^{-1}
      • Solution C: Prepared with mass mC=10 gm_C = 10\,gCm(C)=mCVC=10 g0.100 L=100 g L−1C_m(C) = \frac{m_C}{V_C} = \frac{10\,g}{0.100\,L} = 100\,g\,L^{-1}
    • Physical Takeaway: For an equal volume of solution, Solution C contains a greater mass of solute than Solutions A and B. Solution C is therefore the most concentrated (Cm(A)<Cm(B)<Cm(C)C_m(A) < C_m(B) < C_m(C)).

Preparation of Solutions by Dissolution

  • Concept of Dissolution:

    • Dissolution is the physical-chemical process in which a solute is dissolved into a solvent to generate a homogeneous mixture.
  • Calculation of the Mass of Solute to Sample:

    • To prepare a solution of target volume VsolutionV_{\text{solution}} and target mass concentration CmC_m (or tt), the mass of solid solute required is calculated using:         msoluteˊ=Cm×Vsolutionm_{\text{soluté}} = C_m \times V_{\text{solution}}msoluteˊ=t×Vsolutionm_{\text{soluté}} = t \times V_{\text{solution}}
    • Worked Application (Glucose Solution):
      • Target volume: Vsolution=50.0 mL=50.0×10−3 LV_{\text{solution}} = 50.0\,\text{mL} = 50.0 \times 10^{-3}\,L
      • Target mass concentration: Cm=18.0 g L−1C_m = 18.0\,g\,L^{-1}
      • Required mass of glucose (mglucosem_{\text{glucose}}):             mglucose=Cm×Vsolution=18.0 g L−1×50.0×10−3 L=0.900 gm_{\text{glucose}} = C_m \times V_{\text{solution}} = 18.0\,g\,L^{-1} \times 50.0 \times 10^{-3}\,L = 0.900\,g
  • Precision Mass Measurement Protocol Using an Electronic Balance:

    • Pre-weighing Requirement: The pan of the balance must be completely clean and dry before initiating the procedure; any residual solid or liquid deposits will falsify the weighing.
    • Step 1: Turn on the electronic balance and ensure that the digital display indicates 0.0 g0.0\,g.
    • Step 2: Place an empty, clean container (such as a watch glass or beaker) onto the center of the balance pan. Depress the TARE button to reset the digital readout to 0.0 g0.0\,g, thereby canceling out the tare weight of the container.
    • Step 3: Carefully introduce the solid or liquid solute into the container until reaching the desired mass. Record the final reading, ensuring the gram (gg) unit is specified.
  • Step-by-Step Dissolution Experimental Protocol:

    • Step 1 (Weighing): Place a watch glass (verre de montre) on the pan of an electronic balance. Tare the balance. Add solid solute onto the watch glass until reaching the desired target mass msoluteˊm_{\text{soluté}}.
    • Step 2 (Transfer and Rinsing): Position a funnel inside the neck of a volumetric flask (fiole jaugée) of nominal volume VV. Pour the weighed solid into the volumetric flask through the funnel. Thoroughly rinse both the watch glass and the funnel with distilled water (eau distillée), collecting all wash water directly into the volumetric flask to ensure zero loss of solute.
    • Step 3 (Initial Filling and Dissolution): Fill the volumetric flask to approximately three-quarters (34\frac{3}{4}) of its capacity with distilled water. Insert the stopper into the flask and agitate the mixture thoroughly until the solid solute has completely dissolved.
    • Step 4 (Meniscus Adjustment): Add distilled water using a wash bottle (pissette), and complete the final milliliters drop by drop using a simple Pasteur pipette until the bottom of the curved liquid meniscus aligns perfectly with the calibration line (trait de jauge).
      • Technical Tip: Align the operator's eye horizontally with the calibration line to prevent parallax errors, ensuring the bottom curvature of the meniscus rests exactly on the line.
    • Step 5 (Homogenization): Stopper the volumetric flask tightly and invert it repeatedly to homogenize the entire solution.
    • Laboratory Technique Reference: https://ressources.hachette-education.com/PC2de_2019/bons-gestes-dissolution.

Saturation Phenomenon and Solubility

  • Dissolution Limit and Precipitation:

    • For any given volume of solvent, there exists an upper boundary to the mass of solute that can be dissolved.
    • Beyond this threshold mass, additional solute can no longer dissolve; it remains in solid phase and settles to the bottom of the container, even after prolonged agitation.
  • Saturated Solution (Solution Saturée):

    • A solution is saturated when it contains the maximum possible dissolved mass of solute at a given temperature.
  • Solubility (Solubilité):

    • The maximum mass concentration of a solute that can dissolve in a solvent under fixed conditions is defined as the solute's solubility.
    • At this state, the concentration of the solute equals the concentration of the saturated solution:         Cmax=CsaturatedC_{\text{max}} = C_{\text{saturated}}

Preparation of Solutions by Dilution

  • Concept of Dilution:

    • Diluting an aqueous solution consists of adding solvent (distilled water) to lower its solute concentration without altering the absolute amount of solute present.
  • Terminology:

    • Stock Solution (Solution Mère): The initial, more concentrated solution, characterized by mass concentration tmt_m and volume sampled VmV_m.
    • Daughter Solution (Solution Fille): The final, more dilute solution obtained after solvent addition, characterized by lower mass concentration tft_f and final volume VfV_f.
  • Principle of Solute Mass Conservation:

    • During the dilution process, solute is neither added nor removed; only solvent is introduced. Thus, the mass of solute sampled from the stock solution equals the mass of solute present in the daughter solution:         msoluteˊ, mother=msoluteˊ, daughterm_{\text{soluté, mother}} = m_{\text{soluté, daughter}}tm×Vm=tf×Vft_m \times V_m = t_f \times V_f
  • Sampling Volume Formula:

    • The volume of stock solution (VmV_m) required to prepare a volume VfV_f of daughter solution at concentration tft_f is given by:         Vm=tf×VftmV_m = \frac{t_f \times V_f}{t_m}
  • Dilution Factor (FF):

    • The dilution factor (FF) is defined as the ratio of the initial stock concentration to the final daughter concentration, which is inversely proportional to the ratio of their volumes:         F=tmtf=VfVmF = \frac{t_m}{t_f} = \frac{V_f}{V_m}
    • Because the daughter solution is more dilute (tm>tft_m > t_f) and larger in volume (Vf>VmV_f > V_m), the dilution factor is strictly greater than one:         F>1F > 1

Concentration Determination via Calibration Methods

  • Principles of Calibration Assays (Dosage par Étalonnage):

    • A calibration assay determines the unknown mass concentration (tSt_S) of a solute in a solution SS by comparing a measurable physical property of solution SS against the identical property measured across a series of standard solutions (solutions étalons) of precisely known mass concentrations.
  • Color Scale Assay (Dosage par Échelle de Teinte):

    • Applicable when the solute imparts a distinct coloration to the solution (e.g., diiodine solutions).
    • A series of standard solutions are prepared with increasing, known mass concentrations (t1,t2,t3,…t_1, t_2, t_3, \dots), establishing a graduated visual color scale.
    • The unknown solution SS is placed under identical lighting and visual inspection conditions and compared against the standards.
    • The concentration tSt_S is determined by bracketing its color intensity between two consecutive standards:         t2<tS<t3t_2 < t_S < t_3
  • Calibration Curve Assay (Dosage par Courbe d'Étalonnage):

    • Involves measuring a physical parameter that varies systematically with solute concentration—such as volumetric mass/density (ρ\rho in g⋅mL−1g\cdot\text{mL}^{-1}) or mass density—for each standard solution of known concentration tt (g L−1g\,L^{-1}).
    • Plotting the Calibration Graph:
      • A curve is constructed with mass concentration tt on the abscissa (horizontal axis) and volumetric mass ρ\rho on the ordinate (vertical axis):             ρ=f(t)\rho = f(t)
      • At concentration t=0 g L−1t = 0\,g\,L^{-1}, the curve intercepts the vertical axis at the density of the pure solvent (ρsolvant\rho_{\text{solvant}}).
    • Determination Procedure:
      • Measure the volumetric mass ρS\rho_S of the unknown solution SS.
      • Locate the value ρS\rho_S on the vertical axis, project horizontally to intersect the calibration curve, and project vertically downward onto the horizontal axis to read the corresponding mass concentration tSt_S.