10.29 7.11 - TOPIC 4




cells are moving and we can add a latrunculin that is going to stop the cells because it direupts the actin filemtns.  the leaidng edge is jammed ful of acitn filemtns, actin polymerization play a role in structure and fucniotn of the elading edge. 


are actin filemtns necessary for movment.   

is polymerization sufficient?



lister monocytogenes - it causes human infection found in food products = 

listeria -  wtihin the cells will be listeria bacteria. off the organ dots there weill be yellow tails, tails comoing off the bacteira and they are made of actin filemnts. the bacteria hijacks machinery involed in polymerizing filemnts, thye tak over the machiner and buildht eiflments, and use them to move around. WHY do they hikacl? it allows themto move, and they move fast enough because it allows them to blast ourt of one clel into the next so it allwos them to infect cell to cell  wihtout entering the bloodstream meaning they avoid the immune systme. Thye avoid anitbodies. 


is actin required for movment? 

we showed this by showing drugs and what happens


Is it sufficient for movment? (actin poly) can it move in vitro?
ppl made a cell extract, put it on a misrope slide and thena dd the bactiear, and ask can we get the bacteira to move around. on th emiscope slide in the extract.  


micsrope that can. use two di types of miscropy at the same time in parllell. .on the left the bacteir ain the black and on the right we see the commet tail in flouscentse. the bactiera formes commet tails and if u throw in latrunculin it wouldnt form comment tails. . this is importnat , if the bactiera moves in an ex tract we can do biochem and purify protien int extract that are required for any movment. and the goal of biochem is the identyt the min set of protein from the extract that are rquied for movment.  so th emin set of cell proteins. they purfi and purif and prufi and disceredv ehta tmovmetn arequired only the bactiera, actin and atp. these are only the uekrytic protin actin, atp is a energy source, and a lil bit of protien rquired for ovment. 


bacteria induces polymerization, comet tails dont form on their own. bactiera can generate acitn polymerization and formation of ocmet tails.  


you dont need any other uekatotic protiens. all we need from the cell is actin. 


the only eukarotic protein we need is actin, but the bacteira has a lot of proteins like motor proteins that can use it for polymerization. 


what if anybacteirl proteins are required for movment? ppl mutagenized bactera dn wanted to find mutatnt bacteira that cant mojve. they found a loss of fucntion allele that was defective and dint moake a funciton protein and that encoded the act a protien/gene. if u mutate that gene that bacteria doesnt move. its require to form comme ttials and movmemtn. the sequece of act a - its not a motor protein. is acta suffiencent for movment, is act a the only bacterial protein that we need for movmemnt? is acta a sufficient? ppl took a plastic bead and attached act a to one sie, and that bead is the same size as the abctier. if we drop our bea into our purifed actin soltuion, if th ebad moves. then the only bactieral protein that we need, and there no motor protien around. that means that actin polymierzation is suffiecet for mvoent.  if it doesnt then we might need a motot protein. in the experiemtn the bead move around in the presence of actin, actin a is suffiencet for forming actin tail and generating movment. the only source of energy is pol of actin


pol of actin is suffiencet to move the bead, it doesnt need motot protien. for movment of a bactiera. 


the model is that actin pol is suffient for moving the leading edge foraward and has enoguh ernegy to move the memembrane. forward and there is no evidence of any motor proties. we have branched actin filemtns, and motors do not move unbranched filemnces  actin pol moves the leading edge forwrad, 


lysteria, the plus ends of the commet tails are assoicated witht eh abcteria and the minus are the other way., the plus pushes the bactiera forward. 


act a trigger polymerization, its involved in nuclating and assembling filments. 

actin is central to movment. 


what is the regulationof actin assmebly? how to form a leading edge on one side of the cell? we form them on the direction we wantt to move so how does that happen? 


why do acitn filments treadmill?

when we look at th cells moving, cells move at a constant speed.  actin pol is pushignthe leading edge forward, the pol is dictating te speed that the cells moves, what dictates the speed of cells? it is the rate of pol that ditactes the rate of movemtn. treadmiling 



movment is depend


rate of treamdiling is based on the concentiroano f ga ctin, 


on on the rate of polymeriztion,  treadmilling, the amount of free monomers dictates the speed of mvometn. if you have low conc the plus end is going to be slow . treadmilling allows u to do is keep the conce momer high because u recylt hte ones that  fall off the minus end. so treadmilling allows u to increase. the conce of fre ememnres. by breakind the minus and using them to the plus end.  cells can move faster with treadmiling. 


if actin pol is pushing membraen foward how does it work, if actin monomer is pushing on the memrbane  how do u add another momer, the membrena is blocking the end of the growing actin filment so it makes sens in terms of experiemewe ve done that the acitn pol moves the membrna but in physcal terms does that actuall work.  



topic 5


regulationof actin assembly. 

regulationis doing it at one place but not another , proteins re going to help actin assmeble, thsoe helper proteins are going to be turned on or off at certain times. we turnon the proteins that regualte the process and build filemnts,


nulcaiton is regulatied to form filmetns wherw we want to form. adtion and loss of momers is also controlled .  the adding or removal of the ends is going to be mediated by protin that either bind to the monomers or bind to the plus or minus ends.   u


in terms of mvomet, there are singal that dictate movment. the singal is going to do is receive by receptor, and then its goin to turn on the protein that build actin flemtsn and so that we build them on the side of the cell where we receve the singals.  


that singal also turns off the protein at the backside of the cell. 

caping protiens stablize the ends and prevent monomers from falling. 


question .cells move faster than you can tranlate an actin gene and tracribe the mRNA to make protein.  scells that moe start to make acitn as they are developing priot to the time. that they need to move so they maek a loTTT. so that the conentrion of the actin in the cell is about one hundred fold above the ctricil conentriaotn, they got all the actin they can mobilize to generate the movment. if they got one hundred times the cc , u shouldhave all finds of  actin filmetns . there is a protien called Thymocin beta 4. It binds to actin momers and holds them in a confromation that they cant polumerizae, and it is called sequestering protein. it keeps themonomers and they cannot form filemtns until they get releaased from the thymosin beta four.  


itis an inhibtor of polymerizaiton . in gray is the actin protein and red is the  thymosin beta four. and its prevent the monomrs frm inteactin withe achother  and its a small protein for a big peptide.  


thymosin beta four - how is it regulated?

two posibilites, singling, we cget a singal that might turn on a protein kinase that mightp horylate the htymosin beta four and causes it to realse the actin. the other is that thers nothign like hta its simply a buggering reaction. if we put some of ths emonomers in polymerse, by euqilibium some monomers would be released from the thuymosin beta four becasue theres an equilibrium.  and if you take the monomer s and put onpolymer we weill relase more monomer from thymosin beta four. ? idk 


profilin? it has two roles ina ctin biology, the first role acts as a nucletoide exchange factor, when they hydrolze atp to adp, when they fall off theyre in the adp form and now we have to kcik out adp so that monomers cna bind atp .  the role of theprofilinis to bind to actin in thea dp form and causes it kick out adtp and take up atp. 


this gire is draw as if prfilin isbindin and converint atp to adp.  this gire would be much better if when profiln binds we kick out adp and then bind atp.  


profilin - the way it does that is that we have our left , and profilin will bind to the opposite side where thesre is the hinge. and it opens up to kick out adp to bind atp and then clos eback up. its bound at the hinge . its an exchange factor. the cleft is at the minus end and poriflin is at the plus end where the higne is at. that is importnat becuase profilin faciliates the assemly of the plus end and prevents the minus, it allows the monomer to add onto the plus end.



because priflin is bound an its the plus end of the monomer that would get on to the minus end of the filment. 99 so when profilin is bound to a monomer i cannot add to the minus end, proflilin blocks it from the minus end and proiflin holds it in the perfect ofrnomation for it ot be added onto the plus end. so the first rol it to act as a nucleotide exchange facto and second is to optimize the monomer for addtion oto the plus end and prevetn it from getting on the minus end .