Reaction Rates and Chemical Equilibrium

Reaction Rates and Collision Theory

  • Fundamental Definition of Reaction Rate:
    • The rate (or speed) of a chemical reaction is defined by the change in concentration of chemical species per unit of time:
    • Measured as the amount of reactant used up (consumed) in a specific period of time.
    • Measured as the amount of product formed (generated) in a specific period of time.
    • Chemical reaction rates span vastly different timescales depending on the chemical identity and environmental conditions:
    • Fruit ripening (e.g., bananas turning yellow to brown): occurs over approximately 5 days5\,\text{days}.
    • Metal oxidation/tarnishing (e.g., silver service oxidation): occurs over approximately 5 months5\,\text{months}.
    • Biological aging and physiological cellular transformation: occurs over approximately 50 years50\,\text{years}.

Timescales of chemical reaction rates showing banana ripening, silver tarnishing, and human aging

  • Collision Theory Requirements:
    • Chemical reactions require reactant particles to physically come into contact with one another.
    • Under collision theory, three specific criteria must simultaneously be satisfied for a productive collision to yield a chemical transformation:
    1. Collision: Reactant molecules must physically collide with each other.
    2. Orientation: Colliding particles must align with the correct spatial geometry and orientation so that existing bonds can break and new chemical bonds can form.
    3. Energy: The kinetic energy of the colliding particles must equal or exceed the energy of activation (EaE_a).
    • Collisions lacking proper orientation result in particles rebounding without undergoing chemical transformation.
    • Collisions possessing insufficient kinetic energy fail to breach the activation barrier, leaving reactant bonds intact.

Molecular collision orientations showing productive collision versus unproductive collisions due to insufficient energy or improper orientation

  • Activation Energy (EaE_a):
    • The activation energy is defined as the minimum quantity of kinetic energy required to break the existing chemical bonds between atoms of reactants during a collision.
    • It represents the energy barrier that colliding reactant molecules must overcome to transition into products.
    • In the gas-phase reaction N2(g)+O2(g)→2NO(g)N_2(g) + O_2(g) \rightarrow 2NO(g), reacting nitrogen and oxygen molecules must absorb sufficient energy upon impact to rupture the triple bond of N2N_2 and the double bond of O2O_2 before forming nitric oxide (NONO).

Reaction energy diagram depicting the energy of reactants, the activation energy barrier, and the final energy of products

  • Pizza Analogy for Rate Consumption:
    • The conceptual definition of rate can be illustrated by monitoring the quantity of pizza slices consumed over elapsed time:
    • At time t=0 mint = 0\,\text{min}, slices consumed = 0 slices0\,\text{slices}.
    • At time t=8 mint = 8\,\text{min}, slices consumed = 4 slices4\,\text{slices}.
    • At time t=12 mint = 12\,\text{min}, slices consumed = 6 slices6\,\text{slices}.
    • At time t=16 mint = 16\,\text{min}, slices consumed = 8 slices8\,\text{slices}.
    • The consumption rate is tracked by measuring the depletion of reactants or appearance of end states per unit of time.

Factors Influencing Reaction Rates

  • Temperature Effects:

    • Elevating the system temperature increases the average kinetic energy of the reacting particles.
    • Reactant molecules move at higher velocities, substantially increasing the overall frequency of collisions per unit time.
    • A significantly higher fraction of colliding molecules possess kinetic energies that equal or exceed the activation energy (EaE_a).
    • Conversely, lowering temperature (e.g., submerging a reaction vessel in an ice bath) depresses kinetic energy, decreases collision frequency, reduces the proportion of particles with energy ≥Ea\ge E_a, and slows the reaction rate.
  • Reactant Concentration Effects:

    • Increasing the concentration of reactants increases the spatial density of particles within a given volume.
    • Higher particle density directly increases the statistical number of possible collisions per second:
    • Flask containing 11 blue molecule and 11 red molecule: 11 collision pathway possible.
    • Flask containing 22 blue molecules and 11 red molecule: 22 collision pathways possible.
    • Flask containing 22 blue molecules and 22 red molecules: 44 collision pathways possible.
    • A higher collision frequency leads to a proportional increase in productive collisions, accelerating the overall reaction rate.
    • Decreasing or removing reactants reduces available collision pathways, thereby diminishing the reaction velocity.

Diagram showing the relationship between number of reactant molecules and potential collision pathways

  • Catalyst Addition and Function:
    • A catalyst speeds up the rate of a chemical reaction by providing an alternative reaction pathway characterized by a lower activation energy (EaE_a).
    • Catalysts participate in intermediate steps but emerge chemically unaltered and are not consumed during the reaction.
    • Catalytic lowering of EaE_a allows a much higher percentage of existing collisions to successfully transition into products at a given temperature.
    • Industrial and Household Examples:
    • Platinum (PtPt) metal serves as a heterogeneous catalyst to facilitate the addition of hydrogen atoms across carbon-carbon double bonds in vegetable oils, producing margarine.
    • Biological catalysts (enzymes) formulated into laundry pre-treatment detergents accelerate the hydrolytic breakdown of protein stains on fabrics.

Reaction energy profiles demonstrating lower activation energy for a catalyzed reaction compared to an uncatalyzed reaction

  • Summary of Rate-Increasing Factors (Table 13.1):

    • Increasing Temperature: Increases reaction rate because molecules collide more frequently and collide with energy equal to or greater than the activation energy.
    • Increasing Reactant Concentration: Increases reaction rate because more reactant particles produce a higher collision frequency.
    • Adding a Catalyst: Increases reaction rate because it lowers the activation energy barrier for the reaction.
  • Environmental Application — Automotive Catalytic Converters:

    • Catalytic converters are integrated into automobile exhaust systems to neutralize hazardous pollutants produced by internal combustion engines.
    • Common engine exhaust pollutants include:
    • Carbon monoxide (COCO)
    • Unburned hydrocarbons, represented by octane (C8H18C_8H_{18})
    • Nitrogen monoxide / nitric oxide (NONO)
    • Solid-particle catalytic converters utilize transition metals, specifically platinum (PtPt) and palladium (PdPd), dispersed across a high-surface-area ceramic honeycomb matrix.
    • Mechanism of Heterogeneous Catalytic Transformation on Metal Surfaces:
    • 2NO(g)→N2(g)+O2(g)2NO(g) \rightarrow N_2(g) + O_2(g): Nitric oxide (NONO) adsorbs onto the PtPt or PdPd surface; the nitrogen-oxygen bonds dissociate into surface-bound atoms; nitrogen atoms combine into N2N_2 and oxygen atoms combine into O2O_2, which subsequently desorb into the exhaust stream.
    • 2CO(g)+O2(g)→2CO2(g)2CO(g) + O_2(g) \rightarrow 2CO_2(g): Carbon monoxide (COCO) and oxygen (O2O_2) adsorb on the metal catalyst; adsorbed O2O_2 dissociates into reactive oxygen atoms; oxygen atoms attack surface-bound COCO to form carbon dioxide (CO2CO_2), which desorbs.
    • Safe tailpipe emissions exiting the catalytic converter include water (H2OH_2O), carbon dioxide (CO2CO_2), nitrogen (N2N_2), and oxygen (O2O_2).

Automobile catalytic converter system converting exhaust pollutants into harmless tailpipe emissions

Surface catalytic mechanism of NO decomposition and CO oxidation over platinum and palladium

  • Practice Analysis — Rate Influences:
    • Reaction: 2CO(g)+O2(g)→2CO2(g)2CO(g) + O_2(g) \rightarrow 2CO_2(g)
    • Raising temperature: Rate increases (molecules move faster with more energy).
    • Removing O2O_2: Rate decreases (collision frequency between reactants drops).
    • Adding a catalyst: Rate increases (lowers activation energy).
    • Lowering temperature: Rate decreases (molecules possess less kinetic energy).
    • Placing the reaction flask in ice: Rate decreases (reduces thermal kinetic energy).
    • Increasing concentration of a reactant: Rate increases (increases collision probability).

Dynamic Chemical Equilibrium and Reversible Reactions

  • Nature of Reversible Reactions:

    • A reversible reaction occurs simultaneously in both the forward direction (reactants transforming into products) and the reverse direction (products colliding to regenerate reactants).
    • Reversibility is symbolized using opposing arrows (⇌\rightleftharpoons):
    • Forward reaction: Reactants collide to form products.
    • Reverse reaction: As product concentration accumulates, product molecules collide with sufficient energy to re-form original reactants.
    • Example: Sulfur dioxide oxidation to sulfur trioxide:
    • Forward process: 2SO2(g)+O2(g)→2SO3(g)2SO_2(g) + O_2(g) \rightarrow 2SO_3(g)
    • Reverse process: 2SO3(g)→2SO2(g)+O2(g)2SO_3(g) \rightarrow 2SO_2(g) + O_2(g)
    • Combined equilibrium system: 2SO2(g)+O2(g)⇌2SO3(g)2SO_2(g) + O_2(g) \rightleftharpoons 2SO_3(g)
    • Example: Carbon disulfide formation from methane and hydrogen sulfide:
    • Forward: CH4(g)+2H2S(g)→CS2(g)+4H2(g)CH_4(g) + 2H_2S(g) \rightarrow CS_2(g) + 4H_2(g)
    • Reverse: CS2(g)+4H2(g)→CH4(g)+2H2S(g)CS_2(g) + 4H_2(g) \rightarrow CH_4(g) + 2H_2S(g)
    • Combined system: CH4(g)+2H2S(g)⇌CS2(g)+4H2(g)CH_4(g) + 2H_2S(g) \rightleftharpoons CS_2(g) + 4H_2(g)
  • State of Chemical Equilibrium:

    • A reaction reaches chemical equilibrium when no further changes occur in the concentrations of either reactants or products.
    • Two core operational rules define dynamic equilibrium:
    1. The rate of the forward reaction equals the rate of the reverse reaction (Rateforward=Ratereverse\text{Rate}_{\text{forward}} = \text{Rate}_{\text{reverse}}).
    2. The concentrations of all reactants and products remain strictly constant over time.
    • Equilibrium is dynamic: Forward and reverse transformations do not halt; they proceed at identical speeds, ensuring no macroscopic net change.

Reaction rate profile over time showing the forward rate decreasing and reverse rate increasing until equal at equilibrium

Concentration profiles over time showing reactant depletion and product accumulation until leveling off at equilibrium

  • Quantitative Time-Course Progression of Reaching Equilibrium:
    • In the gas-phase reaction H2(g)+I2(g)⇌2HI(g)H_2(g) + I_2(g) \rightleftharpoons 2HI(g), tracked across an 8 h8\,\text{h} timeline:
    • At t=0:00 ht = 0:00\,\text{h}: Reactant concentration = 8 units8\,\text{units} (4 units  H2+4 units  I24\,\text{units}\;H_2 + 4\,\text{units}\;I_2); Product concentration (HIHI) = 0 units0\,\text{units}; forward rate is at its maximum; reverse rate = 00.
    • At t=1:00 ht = 1:00\,\text{h}: Reactant concentration decreases to 6 units6\,\text{units} (3+33 + 3); Product concentration rises to 2 units2\,\text{units}; forward rate moderates; reverse rate initiates.
    • At t=2:00 ht = 2:00\,\text{h}: Reactant concentration decreases to 4 units4\,\text{units} (2+22 + 2); Product concentration rises to 4 units4\,\text{units}; forward rate decreases further; reverse rate increases.
    • At t=3:00 ht = 3:00\,\text{h}: Reactant concentration reaches 2 units2\,\text{units} (1+11 + 1); Product concentration reaches 6 units6\,\text{units}; forward rate equals reverse rate; equilibrium is attained.
    • At t=8:00 ht = 8:00\,\text{h}: Reactant concentration remains unchanged at 2 units2\,\text{units} (1+11 + 1); Product concentration remains unchanged at 6 units6\,\text{units}; forward rate remains equal to reverse rate.

Timeline diagram of the H2 plus I2 reaction showing concentration changes and arrow vectors for reaction rates until equilibrium

  • Equivalence of Forward and Reverse Approaches:
    • Chemical equilibrium can be reached from either direction:
    • Initiating a reaction vessel with stoichiometric quantities of SO2(g)SO_2(g) and O2(g)O_2(g) yields an equilibrium mixture containing SO2SO_2, O2O_2, and SO3SO_3.
    • Initiating a reaction vessel of identical volume with pure SO3(g)SO_3(g) yields the identical equilibrium distribution of SO2SO_2, O2O_2, and SO3SO_3 at a specified temperature.

The Equilibrium Constant (KcK_c) Expression

  • General Formulation and Mathematical Expression:

    • For any reversible chemical reaction of the generalized form:     aA+bB⇌cC+dDaA + bB \rightleftharpoons cC + dD
    • The equilibrium constant expression, denoted as KcK_c, is written as the ratio of product concentrations to reactant concentrations, where each species concentration is raised to a power equal to its stoichiometric coefficient in the balanced chemical equation:     Kc=[C]c[D]d[A]a[B]bK_c = \frac{[C]^c [D]^d}{[A]^a [B]^b}
    • Square brackets ([… ][\dots]) indicate equilibrium molar concentrations in units of moles per liter (mol/L\text{mol/L} or mol dm−3mol\,dm^{-3}).
    • Stoichiometric coefficients (a,b,c,da, b, c, d) become exponents (powers) in the expression.
    • Numerical values for KcK_c are determined experimentally by substituting equilibrium molar concentrations into the equation.
    • Conventions regarding units:
    • While formal physical units depend on the specific stoichiometric sum of powers, standard chemical practice reports KcK_c values as dimensionless (without units).
    • At a specific constant temperature, a chemical reaction has exactly one unique value for KcK_c, regardless of initial reactant or product amounts.
  • Step-by-Step Protocol for Constructing an Equilibrium Expression:

    • Step 1: Write the fully balanced chemical equation for the reversible process.
    • Step 2: Formulate the expression ratio placing product concentrations in the numerator and reactant concentrations in the denominator.
    • Step 3: Convert each stoichiometric coefficient preceding chemical formulas in the balanced equation into a corresponding mathematical exponent for each concentration term.
    • Application: For the oxidation of sulfur dioxide:     2SO2(g)+O2(g)⇌2SO3(g)2SO_2(g) + O_2(g) \rightleftharpoons 2SO_3(g)Kc=[SO3]2[SO2]2[O2]K_c = \frac{[SO_3]^2}{[SO_2]^2 [O_2]}
  • Experimental Invariance of KcK_c at Constant Temperature (Table 13.2):

    • System: H2(g)+I2(g)⇌2HI(g)H_2(g) + I_2(g) \rightleftharpoons 2HI(g) maintained at 427 ∘C427\,^\circ\text{C}.
    • Mathematical Expression:     Kc=[HI]2[H2][I2]K_c = \frac{[HI]^2}{[H_2][I_2]}
    • Experiment 1:
    • Measured equilibrium concentrations: [H2]=0.10 M[H_2] = 0.10\,\text{M}, [I2]=0.20 M[I_2] = 0.20\,\text{M}, [HI]=1.04 M[HI] = 1.04\,\text{M}.
    • Calculation:       Kc=[1.04]2[0.10][0.20]=54K_c = \frac{[1.04]^2}{[0.10][0.20]} = 54
    • Experiment 2:
    • Measured equilibrium concentrations: [H2]=0.20 M[H_2] = 0.20\,\text{M}, [I2]=0.20 M[I_2] = 0.20\,\text{M}, [HI]=1.47 M[HI] = 1.47\,\text{M}.
    • Calculation:       Kc=[1.47]2[0.20][0.20]=54K_c = \frac{[1.47]^2}{[0.20][0.20]} = 54
    • Experiment 3:
    • Measured equilibrium concentrations: [H2]=0.30 M[H_2] = 0.30\,\text{M}, [I2]=0.17 M[I_2] = 0.17\,\text{M}, [HI]=1.66 M[HI] = 1.66\,\text{M}.
    • Calculation:       Kc=[1.66]2[0.30][0.17]=54K_c = \frac{[1.66]^2}{[0.30][0.17]} = 54
    • Despite completely different initial and equilibrium concentration mixtures, the calculated constant remains invariant at Kc=54K_c = 54 at 427 ∘C427\,^\circ\text{C}.
  • Step-by-Step Protocol for Calculating Numerical KcK_c Values:

    • Step 1: State the given equilibrium molar concentrations and identify the unknown quantity (KcK_c).
    • Step 2: Formulate the balanced equilibrium expression for the specific reaction.
    • Step 3: Substitute the equilibrium molar concentrations into the expression and solve mathematically.
    • Worked Example: Gas-phase decomposition of dinitrogen tetroxide into nitrogen dioxide:     N2O4(g)⇌2NO2(g)N_2O_4(g) \rightleftharpoons 2NO_2(g)
    • Conditions at 100 ∘C100\,^\circ\text{C}: [N2O4]=0.45 M[N_2O_4] = 0.45\,\text{M}, [NO2]=0.31 M[NO_2] = 0.31\,\text{M}.
    • Formulate expression:       Kc=[NO2]2[N2O4]K_c = \frac{[NO_2]^2}{[N_2O_4]}
    • Substitution and calculation:       Kc=[0.31]2[0.45]=0.09610.45=0.21K_c = \frac{[0.31]^2}{[0.45]} = \frac{0.0961}{0.45} = 0.21

Heterogeneous Equilibrium Systems

  • Definition of Heterogeneous Equilibrium:

    • Occurs when reactants and products in a reversible reaction exist in multiple distinct states of matter (solids, liquids, and gases).
  • Handling Pure Solids and Pure Liquids:

    • The concentrations of pure solids ((s)(s)) and pure liquids ((l)(l)) are determined by their intrinsic densities and molar masses, which do not change during a chemical reaction.
    • Because their concentrations remain completely constant, pure solids and pure liquids are omitted from the equilibrium expression.
    • Only gaseous species ((g)(g)) and aqueous species ((aq)(aq)) are included in the formulation of KcK_c.
  • Decomposition of Sodium Bicarbonate:

    • Balanced reaction:     2NaHCO3(s)⇌Na2CO3(s)+CO2(g)+H2O(g)2NaHCO_3(s) \rightleftharpoons Na_2CO_3(s) + CO_2(g) + H_2O(g)
    • Because NaHCO3(s)NaHCO_3(s) and Na2CO3(s)Na_2CO_3(s) are pure solids, their concentrations are omitted:     Kc=[CO2][H2O]K_c = [CO_2][H_2O]
  • Decomposition of Calcium Carbonate:

    • Balanced reaction:     CaCO3(s)⇌CaO(s)+CO2(g)CaCO_3(s) \rightleftharpoons CaO(s) + CO_2(g)
    • Equilibrium expression:     Kc=[CO2]K_c = [CO_2]
    • Physical behavior at constant temperature (800 ∘C800\,^\circ\text{C}):
    • The equilibrium concentration of gaseous CO2CO_2 inside a closed container is strictly identical regardless of whether there are large or small quantities of solid CaCO3CaCO_3 and CaOCaO present.

Heterogeneous equilibrium of calcium carbonate decomposition at 800 degrees Celsius showing identical CO2 gas concentration regardless of solid amounts

  • Deacon Process Reaction (Hydrochloric Acid and Oxygen):
    • Balanced equation:     4HCl(g)+O2(g)⇌2H2O(l)+2Cl2(g)4HCl(g) + O_2(g) \rightleftharpoons 2H_2O(l) + 2Cl_2(g)
    • Because water is formed in the liquid state (H2O(l)H_2O(l)), it is excluded from the expression.
    • Equilibrium expression:     Kc=[Cl2]2[HCl]4[O2]K_c = \frac{[Cl_2]^2}{[HCl]^4 [O_2]}

Interpretation and Analytical Use of KcK_c

  • Significance of the Magnitude of KcK_c:
    • The numerical value of KcK_c indicates the extent of reaction conversion and the composition of the equilibrium mixture:
    • Large KcK_c (Kc≫1K_c \gg 1): Indicates that the numerator ([Products][\text{Products}]) is significantly larger than the denominator ([Reactants][\text{Reactants}]). At equilibrium, the system consists mostly of products; the forward reaction is favored, and the reaction proceeds essentially to completion.
    • Small KcK_c (Kc≪1K_c \ll 1): Indicates that the denominator ([Reactants][\text{Reactants}]) is significantly larger than the numerator ([Products][\text{Products}]). At equilibrium, the system consists mostly of reactants; the reverse reaction is favored, and very little product forms.
    • Intermediate KcK_c (Kc≈1K_c \approx 1): Concentrations of reactants and products are comparable at equilibrium; moderate conversion occurs.
    • The magnitude of KcK_c provides zero information regarding reaction velocity; it dictates thermodynamic equilibrium composition, not how quickly equilibrium is achieved.

Equilibrium constant magnitude continuum comparing small Kc, intermediate Kc around 1, and large Kc values

  • Comparative Case Studies of Equilibrium Magnitudes:
    • Reaction: 2SO2(g)+O2(g)⇌2SO3(g)2SO_2(g) + O_2(g) \rightleftharpoons 2SO_3(g)
    • Expression and value:       Kc=[SO3]2[SO2]2[O2]=3.4×102K_c = \frac{[SO_3]^2}{[SO_2]^2 [O_2]} = 3.4 \times 10^2
    • Equilibrium mixture: Contains predominantly SO3(g)SO_3(g) product with minimal remaining SO2(g)SO_2(g) and O2(g)O_2(g).

Bar chart of reactant and product concentrations for the oxidation of SO2 showing product dominance at equilibrium

  • Reaction: N2(g)+O2(g)⇌2NO(g)N_2(g) + O_2(g) \rightleftharpoons 2NO(g)
    • Expression and value:     Kc=[NO]2[N2][O2]=2×10−9K_c = \frac{[NO]^2}{[N_2][O_2]} = 2 \times 10^{-9}
    • Equilibrium mixture: Contains predominantly N2(g)N_2(g) and O2(g)O_2(g) reactants with trace quantities of NO(g)NO(g).

Bar chart of reactant and product concentrations for nitric oxide synthesis showing reactant dominance at equilibrium

  • Representative Equilibrium Constants at High and Low Extremes (Table 13.3):

    • 2CO(g)+O2(g)⇌2CO2(g)2CO(g) + O_2(g) \rightleftharpoons 2CO_2(g): Kc=2×1011K_c = 2 \times 10^{11} (Equilibrium mixture contains mostly product).
    • 2H2(g)+S2(g)⇌2H2S(g)2H_2(g) + S_2(g) \rightleftharpoons 2H_2S(g): Kc=1.1×107K_c = 1.1 \times 10^7 (Equilibrium mixture contains mostly product).
    • N2(g)+3H2(g)⇌2NH3(g)N_2(g) + 3H_2(g) \rightleftharpoons 2NH_3(g): Kc=1.6×102K_c = 1.6 \times 10^2 (Equilibrium mixture contains mostly product).
    • PCl5(g)⇌PCl3(g)+Cl2(g)PCl_5(g) \rightleftharpoons PCl_3(g) + Cl_2(g): Kc=1.2×10−2K_c = 1.2 \times 10^{-2} (Equilibrium mixture contains mostly reactant).
    • N2(g)+O2(g)⇌2NO(g)N_2(g) + O_2(g) \rightleftharpoons 2NO(g): Kc=2×10−9K_c = 2 \times 10^{-9} (Equilibrium mixture contains mostly reactants).
  • Practice Categorization of Equilibrium Systems:

    • Hydrogen and fluorine synthesis: H2(g)+F2(g)⇌2HF(g)H_2(g) + F_2(g) \rightleftharpoons 2HF(g) with Kc=1×1095K_c = 1 \times 10^{95}.
    • Interpretation: KcK_c is exceedingly large (1×1095≫11 \times 10^{95} \gg 1); the equilibrium mixture contains mostly products.
    • Ozone formation from molecular oxygen: 3O2(g)⇌2O3(g)3O_2(g) \rightleftharpoons 2O_3(g) with Kc=1.8×10−7K_c = 1.8 \times 10^{-7}.
    • Interpretation: KcK_c is very small (1.8×10−7≪11.8 \times 10^{-7} \ll 1); the equilibrium mixture contains mostly reactants.
  • Calculation of Unknown Equilibrium Concentrations:

    • Methodological Steps:
    • Step 1: State the known concentrations and the unknown concentration variable.
    • Step 2: Formulate the equilibrium constant expression (KcK_c) and algebraically isolate the unknown concentration.
    • Step 3: Substitute the known numerical values into the rearranged equation and compute the result.
    • Worked Example Problem: In the reaction of carbon dioxide and hydrogen gas at elevated temperature:     CO2(g)+H2(g)⇌CO(g)+H2O(g)Kc=0.11CO_2(g) + H_2(g) \rightleftharpoons CO(g) + H_2O(g) \quad K_c = 0.11
    • Equilibrium concentrations: [CO2]=0.25 M[CO_2] = 0.25\,\text{M}, [H2]=0.80 M[H_2] = 0.80\,\text{M}, [H2O]=0.50 M[H_2O] = 0.50\,\text{M}.
    • Unknown: Equilibrium concentration of carbon monoxide, [CO][CO].
    • Formulate standard expression:       Kc=[CO][H2O][CO2][H2]K_c = \frac{[CO][H_2O]}{[CO_2][H_2]}
    • Multiply both sides by [CO2][H2][CO_2][H_2]:       Kc×[CO2][H2]=[CO][H2O]K_c \times [CO_2][H_2] = [CO][H_2O]
    • Divide both sides by [H2O][H_2O] to isolate [CO][CO]:       [CO]=Kc×[CO2][H2][H2O][CO] = K_c \times \frac{[CO_2][H_2]}{[H_2O]}
    • Substitute values and calculate:       [CO]=0.11×[0.25][0.80][0.50]=0.11×0.200.50=0.11×0.40=0.044 M[CO] = 0.11 \times \frac{[0.25][0.80]}{[0.50]} = 0.11 \times \frac{0.20}{0.50} = 0.11 \times 0.40 = 0.044\,\text{M}

Le Châtelier's Principle

  • Fundamental Principle:
    • Le Châtelier’s principle states that when an external stress (a change in concentration, temperature, or volume/pressure) is placed on a system at dynamic chemical equilibrium, the system shifts the forward or reverse reaction rates in a direction that counteracts the imposed stress until a new equilibrium is established.
    • When disturbed, forward and reverse reaction rates become unequal until the system readjusts.
    • Communicating Water Tank Model:
    • Two interconnected water tanks (AA and BB) at equilibrium maintain identical fluid levels.
    • Adding water to Tank AA increases hydrostatic pressure and accelerates fluid transfer toward Tank BB (forward direction).
    • Fluid levels readjust until equal levels are restored in both tanks at a higher total volume.

Communicating water tanks showing equilibrium shift and re-establishment when fluid is added to one side

  • Effects of Concentration Perturbations:
    • System: H2(g)+I2(g)⇌2HI(g)H_2(g) + I_2(g) \rightleftharpoons 2HI(g)
    • Adding Reactant (H2H_2 or I2I_2): Increases reactant collision frequency, accelerating the forward reaction rate. Consumes added reactants and produces more HIHI. Shift: Toward Products (Forward).
    • Removing Reactant (H2H_2 or I2I_2): Reduces forward collisions. The reverse reaction proceeds faster, converting HIHI back into reactants until balance is restored. Shift: Toward Reactants (Reverse).
    • Adding Product (HIHI): Increases product collision frequency, accelerating the reverse reaction rate. Converts added HIHI back into H2H_2 and I2I_2. Shift: Toward Reactants (Reverse).
    • Removing Product (HIHI): Decreases product collision frequency, allowing the forward reaction rate to dominate, producing more HIHI. Shift: Toward Products (Forward).

Molecular representation of adding H2 reactant to an equilibrium mixture resulting in forward shift to produce more HI

  • Concentration Stress and Shift Summary (Table 13.4):

    • Reaction: H2(g)+I2(g)⇌2HI(g)H_2(g) + I_2(g) \rightleftharpoons 2HI(g)
    • Increasing [H2][H_2]: Shifts in the direction of Product.
    • Decreasing [H2][H_2]: Shifts in the direction of Reactants.
    • Increasing [I2][I_2]: Shifts in the direction of Product.
    • Decreasing [I2][I_2]: Shifts in the direction of Reactants.
    • Increasing [HI][HI]: Shifts in the direction of Reactants.
    • Decreasing [HI][HI]: Shifts in the direction of Product.
  • Effects of Volume and Pressure Perturbations on Gases:

    • Changing container volume changes the concentration and partial pressure of gaseous components:
    • Decreasing Volume (Increasing Pressure): Particles are compressed into a smaller space, increasing overall concentration and collision frequency. The system responds by shifting toward the side containing fewer moles of gas to reduce total pressure.
    • Increasing Volume (Decreasing Pressure): Particles expand into a larger space, reducing concentration and total pressure. The system responds by shifting toward the side containing more moles of gas to restore pressure.
    • Quantitative System Analysis:     2CO(g)+O2(g)⇌2CO2(g)2CO(g) + O_2(g) \rightleftharpoons 2CO_2(g)
    • Reactant side = 2 moles  CO+1 mole  O2=3 moles of gas2\,\text{moles}\;CO + 1\,\text{mole}\;O_2 = 3\,\text{moles of gas}.
    • Product side = 2 moles of gas  (CO2)2\,\text{moles of gas}\;(CO_2).
    • Decreasing container volume: The system shifts toward fewer gas moles (→\rightarrow toward products, producing more CO2CO_2).
    • Increasing container volume: The system shifts toward more gas moles (←\leftarrow toward reactants, regenerating COCO and O2O_2).
    • When a reaction has equal numbers of gas moles on both sides (e.g., H2(g)+I2(g)⇌2HI(g)H_2(g) + I_2(g) \rightleftharpoons 2HI(g), where 2 moles=2 moles2\,\text{moles} = 2\,\text{moles}), volume/pressure changes have zero effect on equilibrium position.

Piston cylinder apparatus demonstrating equilibrium shifts of 2CO + O2 to 2CO2 under volume decrease and volume increase

  • Effects of Temperature Perturbations:

    • Heat is treated as a chemical reactant or product in the thermochemical equation:
    • Endothermic Reactions (ΔH>0\Delta H > 0): Heat is treated as a reactant:       Reactants+heat⇌Products\text{Reactants} + \text{heat} \rightleftharpoons \text{Products}
      • Increasing temperature: Excess heat is added; system shifts toward products (forward) to consume heat.
      • Decreasing temperature: Heat is removed; system shifts toward reactants (reverse) to regenerate heat.
      • Specific example: N2(g)+O2(g)+heat⇌2NO(g)N_2(g) + O_2(g) + \text{heat} \rightleftharpoons 2NO(g)
      • Lowering temperature: Shifts left toward reactants (N2N_2 and O2O_2).
      • Raising temperature: Shifts right toward product (NONO).
    • Exothermic Reactions (ΔH<0\Delta H < 0): Heat is treated as a product:       Reactants⇌Products+heat\text{Reactants} \rightleftharpoons \text{Products} + \text{heat}
      • Increasing temperature: Heat is added; system shifts toward reactants (reverse) to remove heat.
      • Decreasing temperature: Heat is removed; system shifts toward products (forward) to generate heat.
      • Specific example: 2SO2(g)+O2(g)⇌2SO3(g)+heat2SO_2(g) + O_2(g) \rightleftharpoons 2SO_3(g) + \text{heat}
      • Lowering temperature: Shifts right toward product (SO3SO_3).
      • Raising temperature: Shifts left toward reactants (SO2SO_2 and O2O_2).
  • Effect of a Catalyst on Equilibrium:

    • Adding a catalyst lowers the activation energy equally for both the forward and reverse directions.
    • It increases the rate of the forward reaction and the rate of the reverse reaction by the exact same factor.
    • Consequently, a catalyst shortens the time required to reach equilibrium, but has absolutely no effect on the numerical value of KcK_c or the composition of the equilibrium mixture.
  • Summary of Le Châtelier Condition Shifts (Table 13.5):

    • Concentration:
    • Adding a reactant: Shifts to Products (forward reaction).
    • Removing a reactant: Shifts to Reactants (reverse reaction).
    • Adding a product: Shifts to Reactants (reverse reaction).
    • Removing a product: Shifts to Products (forward reaction).
    • Volume (Container):
    • Decreasing the volume: Shifts toward Fewer moles of gas.
    • Increasing the volume: Shifts toward More moles of gas.
    • Temperature (Endothermic Reaction):
    • Increasing the temperature: Shifts to Products (forward reaction to remove heat).
    • Decreasing the temperature: Shifts to Reactants (reverse reaction to add heat).
    • Temperature (Exothermic Reaction):
    • Increasing the temperature: Shifts to Reactants (reverse reaction to remove heat).
    • Decreasing the temperature: Shifts to Products (forward reaction to add heat).
    • Catalyst:
    • Increasing forward and reverse rates equally: No effect on equilibrium position.
  • Comprehensive Application Drill — Chemical System Stresses:

    • Reversible reaction: 2NO2(g)+heat⇌2NO(g)+O2(g)2NO_2(g) + \text{heat} \rightleftharpoons 2NO(g) + O_2(g)
    • Adding NONO: Shifts toward reactants (reverse reaction consumes added product).
    • Lowering temperature: Shifts toward reactants (reverse reaction replaces removed heat).
    • Removing O2O_2: Shifts toward products (forward reaction replaces removed product).
    • Increasing volume: Total gas moles = 2 moles2\,\text{moles} (reactants) vs 3 moles3\,\text{moles} (products); system shifts toward more moles of gas (toward products).
    • Removing NONO: Shifts toward products (forward reaction replaces removed product).

Biological and Physiological Applications of Equilibrium

  • Hemoglobin Transport and High-Altitude Hypoxia:

    • Oxygen transport in the human cardiovascular system relies on a reversible coordination equilibrium between hemoglobin (HbHb), free dissolved oxygen (O2O_2), and oxyhemoglobin (HbO2HbO_2):     Hb(aq)+O2(g)⇌HbO2(aq)Hb(aq) + O_2(g) \rightleftharpoons HbO_2(aq)Kc=[HbO2][Hb][O2]K_c = \frac{[HbO_2]}{[Hb][O_2]}
    • Physiological Function Under Normal Sea-Level Conditions:
    • In pulmonary alveoli, the high partial pressure of oxygen (pO2pO_2) drives the equilibrium to the right, loading oxygen onto hemoglobin to synthesize oxyhemoglobin (HbO2HbO_2).
    • In peripheral tissues undergoing cellular respiration, pO2pO_2 is low; the equilibrium shifts to the left, releasing oxygen gas from oxyhemoglobin to supply oxygen to tissues.
    • High-Altitude Pathophysiology:
    • At sea level, normal atmospheric pressure drives oxygen diffusion from alveoli into the blood.
    • At elevations exceeding 8000 ft8000\,\text{ft}, atmospheric pressure drops significantly, leading to a diminished alveolar oxygen partial pressure.
    • At an elevation of 18000 ft18000\,\text{ft}, a person inhales approximately 29%29\% less oxygen per breath.
    • By Le Châtelier's principle, lowering [O2][O_2] (removing a reactant) causes the equilibrium to shift left toward reactants:       Hb(aq)+O2(g)←HbO2(aq)Hb(aq) + O_2(g) \leftarrow HbO_2(aq)
    • This depresses blood concentrations of [HbO2][HbO_2], precipitating hypoxia (oxygen deprivation), characterized by fatigue, nausea, headache, and cognitive impairment.
  • Physiological Thermoregulation and Homeostasis:

    • Biological homeostasis uses dynamic feedback loops resembling chemical equilibrium shifts to maintain core human body temperature:
    • When Body Temperature Increases (Heat Dissipation Response):
      • Cutaneous blood vessels dilate (vasodilation) to shunt blood toward the body surface.
      • Sweat gland secretion increases.
      • Evaporative cooling dissipates body heat, restoring baseline body temperature.
    • When Body Temperature Decreases (Heat Conservation and Production Response):
      • Cutaneous blood vessels constrict (vasoconstriction) to preserve core thermal energy.
      • Epinephrine is released to elevate cellular metabolic rates.
      • Muscular shivering initiates rapid involuntary contractions to generate heat.
      • Sweat gland production stops completely.

Homeostatic physiological regulatory mechanisms responding to elevated or lowered core body temperature

Equilibrium in Saturated Solutions and the Solubility Product Constant (KspK_{sp})

  • Dynamics of Saturated Aqueous Solutions:
    • Saturated solutions establish a dynamic heterogeneous equilibrium between undissolved solid ionic solute and dissolved, hydrated ions in water.
    • At constant temperature, the concentration of dissolved ions in equilibrium with the solid phase remains completely constant.
    • Physiological Occurrences:
    • Bones: Equilibrium involving slightly soluble calcium phosphate:       Ca3(PO4)2(s)⇌3Ca2+(aq)+2PO43−(aq)Ca_3(PO_4)_2(s) \rightleftharpoons 3Ca^{2+}(aq) + 2PO_4^{3-}(aq)
    • Kidney Stones: Precipitation of slightly soluble calcium oxalate crystals (CaC2O4CaC_2O_4):       CaC2O4(s)⇌Ca2+(aq)+C2O42−(aq)CaC_2O_4(s) \rightleftharpoons Ca^{2+}(aq) + C_2O_4^{2-}(aq)

Scanning electron micrograph of calcium oxalate crystals associated with human kidney stone formation

  • The Solubility Product Constant (KspK_{sp}) Expression:

    • The solubility product constant, denoted as KspK_{sp}, is the equilibrium constant for the dissolution of a slightly soluble ionic compound in water.
    • Because the undissolved salt is a pure solid ((s)(s)), its concentration is omitted from the denominator.
    • The KspK_{sp} expression equals the product of the equilibrium molar concentrations of the constituent ions, each raised to an exponent corresponding to its stoichiometric coefficient in the balanced dissociation equation:
    • For calcium oxalate: CaC2O4(s)⇌Ca2+(aq)+C2O42−(aq)CaC_2O_4(s) \rightleftharpoons Ca^{2+}(aq) + C_2O_4^{2-}(aq)Ksp=[Ca2+][C2O42−]K_{sp} = [Ca^{2+}][C_2O_4^{2-}]
    • For calcium phosphate: Ca3(PO4)2(s)⇌3Ca2+(aq)+2PO43−(aq)Ca_3(PO_4)_2(s) \rightleftharpoons 3Ca^{2+}(aq) + 2PO_4^{3-}(aq)Ksp=[Ca2+]3[PO43−]2K_{sp} = [Ca^{2+}]^3 [PO_4^{3-}]^2
    • For silver carbonate: Ag2CO3(s)⇌2Ag+(aq)+CO32−(aq)Ag_2CO_3(s) \rightleftharpoons 2Ag^+(aq) + CO_3^{2-}(aq)Ksp=[Ag+]2[CO32−]K_{sp} = [Ag^+]^2 [CO_3^{2-}]
  • Step-by-Step Protocol for Calculating KspK_{sp} from Ion Concentrations:

    • Step 1: State given equilibrium ion concentrations and identify the unknown (KspK_{sp}).
    • Step 2: Write the balanced chemical dissociation equation for the slightly soluble ionic salt.
    • Step 3: Formulate the mathematical solubility product expression (KspK_{sp}).
    • Step 4: Substitute the equilibrium ion concentrations into the expression and compute the numerical value.
  • Worked Example 1 — Direct Dissociation (1:11:1 Salt):

    • A saturated solution of barium carbonate (BaCO3BaCO_3) contains equilibrium concentrations of [Ba2+]=5.1×10−5 M[Ba^{2+}] = 5.1 \times 10^{-5}\,\text{M} and [CO32−]=5.1×10−5 M[CO_3^{2-}] = 5.1 \times 10^{-5}\,\text{M}.
    • Dissociation equation:     BaCO3(s)⇌Ba2+(aq)+CO32−(aq)BaCO_3(s) \rightleftharpoons Ba^{2+}(aq) + CO_3^{2-}(aq)
    • Formulate expression:     Ksp=[Ba2+][CO32−]K_{sp} = [Ba^{2+}][CO_3^{2-}]
    • Substitute and calculate:     Ksp=[5.1×10−5][5.1×10−5]=2.6×10−9K_{sp} = [5.1 \times 10^{-5}][5.1 \times 10^{-5}] = 2.6 \times 10^{-9}
  • Worked Example 2 — Stoichiometric Coefficients (1:21:2 Salt):

    • A saturated solution of strontium fluoride (SrF2SrF_2) contains equilibrium concentrations of [Sr2+]=8.7×10−4 M[Sr^{2+}] = 8.7 \times 10^{-4}\,\text{M} and [F−]=1.7×10−3 M[F^-] = 1.7 \times 10^{-3}\,\text{M}.
    • Dissociation equation:     SrF2(s)⇌Sr2+(aq)+2F−(aq)SrF_2(s) \rightleftharpoons Sr^{2+}(aq) + 2F^-(aq)
    • Formulate expression:     Ksp=[Sr2+][F−]2K_{sp} = [Sr^{2+}][F^-]^2
    • Substitute and calculate:     Ksp=[8.7×10−4][1.7×10−3]2=[8.7×10−4][2.89×10−6]=2.5×10−9K_{sp} = [8.7 \times 10^{-4}][1.7 \times 10^{-3}]^2 = [8.7 \times 10^{-4}][2.89 \times 10^{-6}] = 2.5 \times 10^{-9}
  • Survey of Standard Solubility Product Constants at 25 ∘C25\,^\circ\text{C} (Table 13.6):

    • Silver chloride (AgClAgCl): Ksp=1.8×10−10K_{sp} = 1.8 \times 10^{-10}
    • Silver sulfate (Ag2SO4Ag_2SO_4): Ksp=1.2×10−5K_{sp} = 1.2 \times 10^{-5}
    • Barium sulfate (BaSO4BaSO_4): Ksp=1.1×10−10K_{sp} = 1.1 \times 10^{-10}
    • Calcium carbonate (CaCO3CaCO_3): Ksp=5.0×10−9K_{sp} = 5.0 \times 10^{-9}
    • Calcium fluoride (CaF2CaF_2): Ksp=3.2×10−11K_{sp} = 3.2 \times 10^{-11}
    • Calcium hydroxide (Ca(OH)2Ca(OH)_2): Ksp=6.5×10−6K_{sp} = 6.5 \times 10^{-6}
    • Calcium sulfate (CaSO4CaSO_4): Ksp=2.4×10−5K_{sp} = 2.4 \times 10^{-5}
    • Lead(II) chloride (PbCl2PbCl_2): Ksp=1.5×10−6K_{sp} = 1.5 \times 10^{-6}
    • Lead(II) carbonate (PbCO3PbCO_3): Ksp=7.4×10−14K_{sp} = 7.4 \times 10^{-14}
  • Molar Solubility (SS) and Determination from KspK_{sp}:

    • Definition of Molar Solubility (SS): The quantity of a slightly soluble ionic solute that dissolves to form exactly 1 L1\,\text{L} of a saturated aqueous solution, expressed in units of moles per liter (mol/L\text{mol/L} or MM).
    • Experimental benchmark: The molar solubility of cadmium sulfide (CdSCdS) is determined experimentally to be 1×10−12 M1 \times 10^{-12}\,\text{M}:     CdS(s)⇌Cd2+(aq)+S2−(aq)CdS(s) \rightleftharpoons Cd^{2+}(aq) + S^{2-}(aq)
    • Step-by-Step Protocol to Calculate Molar Solubility (SS) from KspK_{sp}:
    • Step 1: State the given KspK_{sp} and define the needed quantity (SS).
    • Step 2: Write the dissociation equilibrium equation for the slightly soluble compound.
    • Step 3: Write the solubility product expression in terms of SS.
    • Step 4: Solve algebraically for SS.
    • Worked Example Problem: Compute the molar solubility (SS) of lead(II) sulfate (PbSO4PbSO_4), given Ksp=1.6×10−8K_{sp} = 1.6 \times 10^{-8}.
    • Dissociation equation:       PbSO4(s)⇌Pb2+(aq)+SO42−(aq)PbSO_4(s) \rightleftharpoons Pb^{2+}(aq) + SO_4^{2-}(aq)
    • Express ion concentrations in terms of molar solubility (SS):       [Pb2+]=S,[SO42−]=S[Pb^{2+}] = S, \quad [SO_4^{2-}] = S
    • Formulate expression:       Ksp=[Pb2+][SO42−]=S×S=S2K_{sp} = [Pb^{2+}][SO_4^{2-}] = S \times S = S^2
    • Set equal to KspK_{sp} and solve for SS:       S2=1.6×10−8S^2 = 1.6 \times 10^{-8}S=1.6×10−8=1.3×10−4 MS = \sqrt{1.6 \times 10^{-8}} = 1.3 \times 10^{-4}\,\text{M}
    • Quantitative conclusion: Exactly 1.3×10−4 mol1.3 \times 10^{-4}\,\text{mol} of solid PbSO4PbSO_4 dissolves per 1 L1\,\text{L} of saturated solution.