Test 3 (2)
Eukaryotic Chromosomes
Eukaryotes typically have 10 to 50 chromosomes in their body (somatic) cells.
This means most eukaryotic organisms have between 10 and 50 chromosomes in their normal body cells.
Humans have 46 chromosomes in 23 nearly identical pairs.
Humans have 46 chromosomes in total, arranged in 23 pairs that are almost the same.
Additional/missing chromosomes usually fatal. (aneuploidies)
Having extra or missing chromosomes often causes death or serious problems.
Example: Down syndrome (Trisomy 21) is one of the few survivable.
Turner syndrome, is a genetic disorder where a female individual is missing one copy of the X chromosome
Karyotype
Karyotype
A karyotype is the particular array of chromosomes in an individual organism.
Chromosomes are arranged according to size, staining properties, and location of centromere.
Humans are Diploid (2n)
Two complete sets of chromosomes.
46 total chromosomes (23 pairs).
Haploid (n)
One set of chromosomes.
23 chromosomes in humans (e.g., gametes like sperm and egg cells).
DNA is organized into Chromatin
The precise structure of chromosomes, and how they change over the cell cycle, is not fully understood.
We do not completely understand how chromosomes are structured or how they change during the cell cycle.
Chromosomes are composed of chromatin – a complex of DNA and protein.
Chromosomes are made up of chromatin, which is a mix of DNA and protein.
40% DNA: The part of chromatin that contains genetic information.
60% Protein: The part of chromatin that helps organize and pack DNA.
Chromosomes
RNA is also associated with chromosomes during RNA synthesis
RNA is present on chromosomes when it is being made from DNA.
DNA of a single chromosome is one long continuous molecule
Each chromosome is made of one unbroken strand of DNA.
Typical human chromosome 140 million nucleotides long
A human chromosome has about 140 million building blocks (nucleotides).
Average length is 4.3 cm
If stretched out, a chromosome's DNA is about 4.3 centimeters long.
Is compacted to varying degrees within a cell
The DNA is tightly packed to fit inside the cell.
Homologous Chromosomes:
Pair of chromosomes (one from mom, one from dad).
Same genes, but can have different versions (alleles).
Duplicated Chromosomes:
Each homologous chromosome copies itself.
Now have sister chromatids (exact copies) held together.
Still considered homologous because they are the same type of chromosome.
Key Point: After replication, homologous chromosomes are duplicated but still paired.
Nucleosomes
Four primary histones:
The main histones are H2A, H2B, H3, and H4.
DNA 147 bp(base-pair ) long is coiled 1.7 turns around 8 histones
DNA (A-T, G-C) RNA: (A-U, G-C)
About 147 DNA base pairs wrap around a group of 8 histones nearly two times.
Diameter is 10nm
The size of a nucleosome is 10 nanometers.
Linker DNA of 20 to 80 bp separates nucleosomes
Short DNA segments (20–80 base pairs) connect nucleosomes.
“Beads on a string”
The appearance of DNA wrapped around histones resembles beads on a string.
Heterochromatin
Not active.
Tightly packed and not used for gene activity.
Euchromatin
Active.
G1 (Gap Phase 1):
Primary growth phase where the cell grows larger and makes proteins and organelles.
It's the longest phase of the cell cycle.
S (Synthesis):
DNA is replicated (copied) so each new cell will have a complete set of DNA.
By the end, the cell has two copies of every chromosome (sister chromatids).
G2 (Gap Phase 2):
The cell continues to grow and prepare for division.
Organelles replicate, and microtubules organize to help separate chromosomes during mitosis.
M (Mitosis):
The cell's nucleus divides.
Broken into 4 phases: Prophase, Metaphase, Anaphase, and Telophase.
Ensures each new cell gets a full set of chromosomes.
C (Cytokinesis):
The final step where the cell’s cytoplasm divides.
Two new cells are completely separated.
Duration
Time it takes to complete a cell cycle varies greatly:
Not all cells take the same amount of time to go through the cell cycle. It depends on the type of cell and its purpose.
Fruit fly embryos = 8 minutes:
Cells in fruit fly embryos divide very quickly because they need to grow fast.
Mature cells take longer to grow:
Cells that are fully developed and performing their functions take more time to complete the cell cycle.
Typical mammalian cell takes 24 hours:
Most cells in animals, like humans, complete their cell cycle in about one day.
Liver cell takes more than a year:
Liver cells divide very slowly; they can stay in the resting phase (G0) for a very long time.
Growth occurs during G1, G2, and S phases:
The cell is growing and preparing for division during these phases. DNA is copied during S phase.
M phase takes about 1 hour:
Mitosis (M phase), where the cell actually divides, is quick and usually lasts around 1 hour.
Most variation in length of G1:
The time spent in G1 phase varies the most between different cells. Some cells grow quickly, others slowly.
Resting phase G0 – cells spend more or less time here:
G0 is a phase where cells pause and stop dividing.
Some cells stay here temporarily, while others (like nerve cells) may stay here forever.
Interphase (Longest Part):
G1: Cell grows.
S: DNA is copied (replicated).
G2: Cell prepares for division.
M Phase (Mitosis & Cytokinesis):
Prophase, Prometaphase, Metaphase, Anaphase, Telophase: Nucleus divides.
Cytokinesis: Cell splits into two.
Interphase (G1, S, G2 Phases)
G1 (Growth 1):
Cell grows and makes proteins.
S (Synthesis):
DNA is copied (replicated).
G2 (Growth 2):
Prepares for division: Chromosomes coil tightly, centrioles replicate, tubulin is made.
Other Important Parts
Centromere:
The point where sister chromatids are held together.
Kinetochore:
Where microtubules attach during division.
Cohesion:
Protein that holds sister chromatids together at the centromere.
Condensing (Multicellular Animals):
Replaces cohesion to help chromosomes pack tightly.
Sister Chromatids:
Two identical copies of a chromosome connected at the centromere.
Centromere:
The central region where sister chromatids are joined together.
Cohesin Proteins:
Hold the sister chromatids together at the centromere.
Kinetochore:
A protein structure on the centromere where microtubules attach.
Important for pulling chromatids apart during cell division.
Kinetochore Microtubules:
Fibers that attach to the kinetochore and help move chromosomes.
Metaphase Chromosome:
A duplicated chromosome made of two sister chromatids ready for separation.
Mitosis is divided into five phases:
Prophase
Metaphase
Anaphase
Telophase
Prophase
Individual condensed chromosomes first become visible with the light microscope:
Chromosomes coil and become thicker, making them visible under a microscope.
Condensation continues throughout prophase:
Chromosomes keep getting tighter and more compact throughout the entire prophase.
Spindle apparatus assembles:
Structures needed for separating chromosomes form.
Two centrioles move to opposite poles forming spindle apparatus (no centrioles in plants):
In animal cells, centrioles move to opposite ends of the cell to help form the spindle.
Plants do not have centrioles, but they still form a spindle.
Asters – radial array of microtubules in animals (not plants):
Asters are star-shaped microtubule structures that form around centrioles in animal cells.
Plants don’t form asters.
Nuclear envelope breaks down:
The membrane around the nucleus dissolves, so chromosomes are free to move.
In prophase, chromosomes condense, the spindle forms, and the nuclear envelope breaks down.
Metaphase
Alignment of chromosomes along metaphase plate:
Chromosomes line up in the middle of the cell, forming a straight line.
Not an actual structure:
The metaphase plate is not a physical structure; it's an imaginary line where chromosomes align.
Future axis of cell division:
The line where chromosomes are aligned is where the cell will eventually split into two.
In metaphase, chromosomes are lined up in the center of the cell along the metaphase plate, ready to be separated.
Anaphase
Begins when centromeres split:
The connection between sister chromatids breaks apart.
Key event is removal of cohesion proteins from all chromosomes:
Cohesion proteins that were holding sister chromatids together are broken down.
Sister chromatids pulled to opposite poles:
The separated chromatids (now individual chromosomes) move to opposite ends of the cell.
Two forms of movements:
There are two ways chromosomes move apart during anaphase.
Anaphase Part A – kinetochores pulled toward poles:
Chromosomes are pulled toward opposite ends of the cell by shortening of microtubules.
Anaphase Part B – poles move apart:
The cell itself stretches as the poles (ends) of the cell move further away from each other.
Telophase
Spindle apparatus disassembles:
The structures (microtubules) that moved chromosomes apart are broken down.
Nuclear envelope forms around each set of sister chromatids:
New nuclei are created around each group of chromosomes.
Now called chromosomes:
The separated sister chromatids are now called chromosomes.
Chromosomes begin to uncoil:
Chromosomes start to loosen up and return to their normal, relaxed state.
Nucleolus reappears in each new nucleus:
The nucleolus, a part of the nucleus that helps make ribosomes, forms again.
In telophase, chromosomes reach opposite sides, new nuclei form, and chromosomes start to uncoil.
Cytokinesis
Cleavage of the cell into equal halves:
The cell divides into two separate cells, each with its own nucleus.
Animal cells – constriction of actin filaments produces a cleavage furrow:
In animal cells, a ring of proteins (actin filaments) pinches the cell membrane, creating a cleavage furrow until the cell splits.
the ring is also known as a contractile ring
Plant cells – cell plate forms between the nuclei:
In plant cells, a cell plate (new cell wall) forms between the two new nuclei, eventually dividing the cell.
Fungi and some protists – nuclear membrane does not dissolve; mitosis occurs within the nucleus; division of the nucleus occurs with cytokinesis:
In fungi and some protists, the nucleus divides inside the existing nuclear membrane and then splits during cytokinesis.
Cytokinesis is the final step where the cell splits into two separate cells.
Control of the cell cycle
Cell Cycle - Important Points
Two Irreversible Points:
Replication of genetic material: Once DNA is copied, it can’t be undone.
Separation of sister chromatids: Once chromatids are pulled apart, they can’t be rejoined.
Checkpoints:
Points where the cell pauses to check for errors before moving to the next stage.
Process Checked for Accuracy:
The cell cycle stops if there are mistakes or problems.
Responding to Signals:
The cell listens to signals from inside and outside to decide if it should continue dividing.
Three checkpoints
G1/S Checkpoint:
The cell decides whether or not to divide.
Main point where external signals (like growth factors) influence the decision.
G2/M Checkpoint:
The cell commits to mitosis (starting division).
Checks if DNA replication was successful.
Late Metaphase (Spindle) Checkpoint:
Makes sure all chromosomes are properly attached to the spindle before proceeding.
Key Point - Checkpoints are quality control points that make sure the cell is ready to move to the next stage.
Growth Factors
Act by triggering intracellular signaling systems:
Growth factors send signals inside the cell to start processes like division.
Platelet-derived growth factor (PDGF):
One of the first growth factors discovered. It helps cells grow and divide.
PDGF receptor (RTK) initiates MAP kinase cascade:
PDGF binds to its receptor (RTK) which starts a chain reaction (MAP kinase cascade) to cause cell division.
Growth factors can override cellular controls:
They can push cells to divide, even if the cell is normally being stopped by other controls.
Cancer
Unrestrained, uncontrolled growth of cells:
Cells divide without stopping, forming masses or tumors.
Failure of cell cycle control:
Normal checkpoints that regulate cell division don't work properly.
Two kinds of genes that can cause problems when mutated:
Tumor-suppressor genes: Normally stop cell division. When mutated, they can’t stop cells from growing.
Proto-oncogenes: Normally promote cell division. When mutated, they can become overactive and cause too much growth.
Proto-oncogenes
Normal cellular genes that become oncogenes when mutated:
Proto-oncogenes are normal genes that help cells grow. If they mutate, they can turn into oncogenes which cause uncontrolled growth.
Oncogenes can cause cancer:
Mutated proto-oncogenes (oncogenes) can cause cells to divide too much, leading to cancer.
Some encode receptors for growth factors:
These genes make receptors that receive growth signals.
If receptor is mutated in “on,” cell no longer depends on growth factors:
If a receptor is stuck in the “on” position, the cell keeps dividing even without signals.
Some encode signal transduction proteins:
These genes help send messages from the receptor to the rest of the cell.
Only one copy of a proto-oncogene needs to be mutated for uncontrolled division:
Just one mutation can cause the gene to over-activate and cause excessive cell division.
Proto-oncogenes are normal genes that help cells grow, but when mutated, they can cause cancer.
Tumor-Suppressor Genes
p53 gene and many others:
p53 is a common tumor-suppressor gene that stops cells from dividing when there are problems.
Both copies of a tumor-suppressor gene must lose function for cancer to develop:
You need to damage both copies of the gene for it to cause cancer.
First tumor-suppressor identified was the retinoblastoma susceptibility gene (Rb):
The Rb gene was the first discovered tumor-suppressor.
Predisposes individuals for a rare form of cancer that affects the retina of the eye:
If the Rb gene is faulty, it can cause eye cancer (retinoblastoma).
Key Point:
Tumor-suppressor genes stop cells from growing uncontrollably. When they fail, cancer can develop.
P53 Gene
p53 plays a key role in G1 checkpoint:
p53 checks DNA for damage before the cell copies it.
p53 protein monitors integrity of DNA:
It looks for mistakes or damage in the DNA.
If DNA is damaged, cell division is halted and repair enzymes are stimulated:
If p53 finds damage, it stops the cell cycle and tries to fix the problem.
If DNA damage is irreparable, p53 directs the cell to kill itself:
If the damage can't be fixed, p53 triggers cell death (apoptosis) to prevent harmful cells (cancer cells) from growing.
Prevent the development of many mutated cells:
p53 stops damaged cells from dividing, preventing cancer.
If p53 is damaged or missing, cancer is more likely to occur.
The p53 gene is like a safety switch that stops cells from dividing if there’s DNA damage. If it's broken, cancer can happen.
Whole-Genome Sequencing
What it is:
Analyzing all of a cell’s DNA to understand cancer genetics.
Old model is too simple:
Cancer development is more complex than just a straightforward series of mutations.
Comparing Tumor Cells to Normal Cells:
Scientists compare DNA from tumors and healthy cells to find mutations.
Mountain Genes vs. Hill Genes:
Mountain genes: Commonly mutated in many tumors (high-impact genes).
Hill genes: Less frequently mutated, but still contribute to cancer.
Key Point:
Whole-genome sequencing helps us find the important mutations (mountains) and less common mutations (hills) involved in cancer
New Categories of Genes in the Cancer Genome
These genes contribute to cancer by causing more mutations or changing how genes are expressed.
Categories include:
DNA Repair:
Fixes DNA mistakes. When it doesn’t work properly, more mutations occur.
mRNA Splicing:
Processing of mRNA (messenger RNA) before it’s used. Errors can lead to incorrect proteins.
Chromosome Architecture:
How DNA is arranged in the cell. Problems here can cause genetic instability.
Key Point:
Mutations in these categories can lead to more mutations or bad gene expression, making cancer more likely.
Spectra of Mutations
Different cancers have different spectra of mutated genes:
Each type of cancer has different sets of mutated genes.
Important in:
Diagnosis: Identifying which genes are mutated helps diagnose cancer type.
Specific therapies: Targeting the exact mutations helps create better treatments.
SMGs (Significantly Modified Genes):
Genes that are often mutated in certain cancers.
Associated with specific tumor types:
Certain mutations are linked to particular cancers.
Data can be combined with:
Patient’s genotype: Understanding a patient’s unique genetic makeup.
Is it generational?
Effective drugs: Finding the best treatment based on mutations.
Chemotherapy, radiation therapy, surgery, trial drugs
Understanding which genes are mutated helps with diagnosis and targeted treatments.
Heterogeneity in Tumor Cells
Revealed via sequencing:
Studying all of a tumor’s DNA shows differences between cells.
Tumors are NOT clones of a single cell:
Tumors are made up of many different cells with different mutations.
Within a single tumor, there is variation in:
Amount of chromosomal alterations: How much DNA is changed and varied between cells.
Kind of chromosomal alterations: Different cells have different types of mutations.
This has uncovered new mechanisms that damage genes and chromosomes:
Studying this diversity helps find new ways cancer damaged cells.
Tumors are not uniform; they are made of many different cells with different mutations.
Composed of meiosis and fertilization
What does this mean?
Meiosis makes sperm and eggs with half the chromosomes.
Fertilization combines them to make a complete set of chromosomes.
Diploid cells
What does this mean?
Regular body cells (somatic cells) have two sets of chromosomes—one from mom, one from dad.
Haploid cells
What does this mean?
Sperm and eggs have one set of chromosomes each. This is so they can combine during fertilization to make a full set.
Offspring inherit genetic material from 2 parents
What does this mean?
The baby gets half of its DNA from mom and half from dad.
What’s happening here?
Sperm (haploid) has half the chromosomes.
Egg (haploid) also has half the chromosomes.
During fertilization, sperm and egg combine to form a zygote (diploid).
The zygote now has two sets of chromosomes:
Paternal homologues (from the father - shown in red).
Maternal homologues (from the mother - shown in blue).
Haploid = Half the chromosomes (One set) (just mom’s set or just dad’s set). 23 chromosomes
Diploid = Both sets combined (Two sets) (mom’s set and dad’s set).
46 chromosomes
Sexual Reproduction
What does this mean?
Making offspring by making sperm and eggs (meiosis) and combining them (fertilization).
Some life cycles include longer diploid phases (e.g., mammals), some include longer haploid phases (e.g., fungi).
What does this mean?
Mammals: Spend most of their life as diploid (full set of chromosomes).
Fungi: Spend most of their life as haploid (half the chromosomes).
In most animals, diploid state dominates. (2 sets of chromosomes)
What does this mean?
Animals mostly have two sets of chromosomes (diploid) throughout their life.
Single-cell diploid zygote undergoes mitosis to produce diploid somatic cells (body cells)
What does this mean?
The zygote (fertilized egg) divides by mitosis to make all body cells, which are diploid.
Some diploid cells undergo meiosis to produce haploid gametes (called germ-line cells).
What does this mean?
Special cells (germ-line cells) use meiosis to make sperm and eggs (haploid).
The sexual life cycle in humans
Meiosis:
Adults (2n), have germ-line cells that make sperm and eggs (n) through meiosis.
2n = Full set of chromosomes (one set from mom, one from dad).
n = Half the chromosomes (only one set).
Fertilization:
Sperm (n) and Egg (n) combine to form a Zygote (2n)
Is a diploid
n + n = 2n (Restores the full set of chromosomes).
One n from egg/mom and one n from sperm/ dad
Mitosis:
The zygote (2n) divides and grows into a baby and then an adult by mitosis.
Mitosis keeps the chromosome number at 2n (Full set).
Summary:
Meiosis = Making sperm & eggs (n, half chromosomes).
Fertilization = Combining sperm & egg (2n, full set).
Mitosis = Growth and development (2n, full set).
Features of Meiosis
Two Rounds of Division:
Meiosis I and Meiosis II—two separate divisions to reduce chromosome number from 2n to n.
Each division has prophase , metaphase , anaphase , and telophase .
Synapsis (Happens in Meiosis I):
When? - Happens early in Prophase I.
What? - Homologous chromosomes (matching pairs from mom and dad) get close together.
How? - They form a structure called the synaptonemal complex (also called triads).
Allows crossing over
Crossing Over (Prophase I):
What happens? - Homologous chromosomes swap pieces of DNA.
Where? - Points where they cross over are called chiasmata.
Why? - Creates genetic diversity.
First Meiotic Division (Reduction Division):
What happens? - Chromosome number is cut in half (2n → n).
Result: Two cells, each with one chromosome from each pair.
No DNA Replication Between Divisions:
Why? - Keeps the chromosome number low (n) for the next division.
Second Meiotic Division:
What happens? - Separates sister chromatids (copies of a chromosome).
Result: Four cells, all haploid (n).
Crossing over = Genetic mixing (happens at chiasmata).
Reduction division = Cuts chromosomes in half (2n → n).
No DNA copying between divisions.
Second division = Separates chromosome copies, making haploid cells.
Interphase (Before Meiosis Starts):
What happens? - The cell prepares for division, just like in mitosis.
Phases: G1 (growth), S (DNA is copied), G2 (more growth).
Meiosis I (First Division):
Prophase I: Chromosomes pair up and cross over (exchange DNA).
Metaphase I: Pairs of chromosomes line up in the middle.
Anaphase I: Chromosome pairs separate and move to opposite sides.
Telophase I: Two cells form, each with half the chromosomes (n).
Meiosis II (Second Division):
Prophase II: Chromosomes get ready to divide again.
Metaphase II: Chromosomes line up in the middle.
Anaphase II: Sister chromatids (copies) separate.
Telophase II: Four haploid cells (n) are made.
Meiosis I
Prophase I
Chromosomes condense and become visible:
Chromosomes are normally loose, but they coil up tightly to become thicker and visible under a microscope.
Nuclear envelope disappears:
The membrane around the nucleus breaks down so the chromosomes can move freely in the cell.
Spindle fibers form:
Protein strands called spindle fibers appear and will help pull chromosomes apart later.
Chromosomes are made of two sister chromatids:
Each chromosome is actually made up of two identical copies (sister chromatids) that are stuck together.
Synapsis:
Homologous chromosomes (matching pairs from each parent) come together and pair up.
Crossing over happens:
Parts of chromosomes are swapped between homologous pairs. This mixing of DNA increases genetic diversity.
What is Crossing Over?
It's when chromosomes from mom and dad swap pieces of DNA with each other. This happens during Prophase I of Meiosis.
Why does it happen?
To mix up genes and create new combinations. This increases genetic diversity in offspring.
How does it work?
The homologous chromosomes (pairs of chromosomes from mom and dad) line up.
They swap (synapsis) DNA at specific points called chiasmata (singular: chiasma).
The parts that are swapped are between non-sister chromatids (one from mom, one from dad).
What’s the result?
New combinations of genes that were not present before.
After crossing over, chromosomes have a mix of mom and dad’s genes (crossing over).
When does it end?
The chromosomes stay connected at the points of crossing over until they are pulled apart during Anaphase I.
Prophase I:
Chromosomes from mom (red) and dad (blue) pair up.
They are held together by proteins.( Cohesion proteins)
Metaphase I:
Crossing over happens: They swap DNA pieces at points called chiasmata.
This creates new combinations of genes.
Anaphase I:
The chromosomes separate and move apart, but now they have mixed DNA.
Crossing over mixes mom’s and dad’s DNA, creating new genetic combinations for more diversity.
Metaphase I
Paired Chromosomes Stay Together:
Homologous chromosomes (pairs from mom and dad) are still connected after crossing over.
Spindle Fibers Attach to Chromosomes:
Spindle fibers from opposite sides of the cell attach to each homologous chromosome (one red, one blue).
They do NOT attach to sister chromatids like in mitosis—only to whole chromosomes.
Chromosomes Line Up:
The pairs of chromosomes (homologues) line up side-by-side in the middle of the cell (metaphase plate).
Random Orientation:
The way the pairs line up is random.
This randomness increases genetic diversity because the chromosomes can be arranged differently each time.
In Metaphase I, the chromosomes line up in pairs, not individually like in mitosis. This random pairing adds even more genetic variety.
What does it mean?
Random orientation of chromosomes - During Metaphase I, homologous chromosome pairs (one from mom, one from dad) line up randomly along the middle of the cell.
Why is it important?
The random way they line up creates many possible combinations when they separate.
This increases genetic diversity in the offspring.
What do the diagrams show?
Each circle shows chromosomes lined up differently.
Different orientations = different genetic combinations.
Anaphase I
Spindle fibers shorten:
The spindle fibers pull the homologous chromosomes apart.
They break the connections (chiasmata) where crossing over happened.
Homologous chromosomes separate:
The pairs are pulled apart and move to opposite ends (poles) of the cell.
Sister chromatids stay together (unlike mitosis, where they separate).
Each pole gets a haploid set:
After separation, each side of the cell gets a set of chromosomes (half of the original).
This set is called haploid because it has only one chromosome from each pair.
Independent assortment:
The chromosomes separate randomly, meaning the mix of mom’s and dad’s chromosomes at each pole is different every time.
This randomness adds even more genetic diversity.
In Anaphase I, chromosomes are pulled apart, but each chromosome is still made of two sister chromatids. The random separation of chromosomes helps make every cell unique.
Telophase I
Nuclear Envelope Re-forms:
A nuclear membrane forms around the chromosomes at each end of the cell.
This creates two nuclei, one at each pole.
Homologous Chromosomes Are Separated:
The homologous pairs (mom’s and dad’s chromosomes) are completely separated.
They are now in different nuclei.
Sister Chromatids Are Not Identical:
Because of crossing over, the sister chromatids (the two parts of each chromosome) are not exactly the same anymore.
They have mixed DNA from both parents.
Cytokinesis (Cell Splitting):
The cell may or may not fully split into two separate cells at this point.
If it does, it’s called cytokinesis.
Meiosis II Comes Next:
After a short break, the cells will go through Meiosis II to further divide the chromosomes.
Meiosis II is similar to mitosis.
Telophase I finishes the first half of meiosis. The chromosomes are now in separate nuclei, and the cells are getting ready for Meiosis II.
Meiosis II
Meiosis II is similar to mitosis but happens with half the chromosomes (haploid cells). It splits sister chromatids apart.
Prophase II:
Nuclear envelopes break down again.
Spindle fibers form to help pull the chromosomes apart.
Metaphase II:
Chromosomes line up in the middle of each cell (metaphase plate).
This time, it’s individual chromosomes lining up, not pairs.
Anaphase II:
Sister chromatids are pulled apart and move to opposite ends of the cell.
Now, each chromatid becomes its own chromosome.
Telophase II:
Nuclear envelopes form around each set of chromosomes.
Cytokinesis happens, splitting the cells completely.
1End Result:
4 genetically unique haploid cells (each with half the number of chromosomes as the original).
These are usually sperm or egg cells.
Meiosis II separates the sister chromatids. It creates 4 unique cells from the original single cell that started meiosis.
Prophase II
Shorter Duration:
This stage is quicker than Prophase I because the chromosomes are already condensed.
All phases of Meiosis II are faster than their counterparts in Meiosis I.
Spindle Apparatus Forms:
New spindle fibers appear in each of the two cells formed from Meiosis I.
These fibers will help separate the chromosomes later on.
Nuclear Envelope Breaks Down:
The nuclear membrane around each nucleus disappears.
This allows the spindle fibers to attach to the chromosomes.
Prophase II is about getting ready to separate the chromatids. The spindle forms, and the nuclear envelope dissolves, just like in mitosis.
Metaphase II
Chromosomes Line Up:
Chromosomes (made of two sister chromatids) line up in the middle of each cell (metaphase plate).
This happens in both cells created from Meiosis I.
Spindle Fibers Attach:
Spindle fibers from opposite ends of the cell attach to each chromatid at the centromere.
They grab onto special protein structures called kinetochores on the chromosomes.
In Metaphase II, chromosomes line up individually, not in pairs like Metaphase I. This is similar to mitosis, but with half the number of chromosomes.
Anaphase II
Spindle Fibers Shorten:
The spindle fibers (also called kinetochore microtubules) pull the chromatids apart by getting shorter.
This process separates the chromatids.
Sister Chromatids Separate:
Unlike Anaphase I, here the sister chromatids are pulled apart and move to opposite ends of the cell.
Each chromatid is now considered a separate chromosome.
In Anaphase II, the sister chromatids split and move to opposite sides, creating new chromosomes. This is very similar to what happens in mitosis.
Telophase II
Nuclear Membranes Re-form:
New nuclear membranes form around the chromosomes at each end of the cells.
There are now four separate clusters of chromosomes.
Cytokinesis:
The cells split completely, creating four individual cells.
This process is called cytokinesis.
End Result:
Four haploid cells are formed, each with half the number of chromosomes as the original cell.
These cells are genetically unique because of crossing over and independent assortment (separate randomly and pull differently).
Telophase II completes meiosis, resulting in four unique haploid cells. These cells are typically sperm or eggs.
Final results of meiosis
Four Haploid Cells:
Meiosis creates 4 cells, each with half the number of chromosomes (haploid cells).
These cells are genetically unique because of crossing over and independent assortment.
Animals:
These cells become gametes (sperm or eggs).
They are ready for fertilization (combine gametes) to create a new organism.
Plants, Fungi, and Protists:
These cells may divide further by mitosis.
This helps them produce more gametes or form adults with different chromosome sets.
For example, plants can produce spores that grow into new organisms.
Meiosis results in four genetically unique haploid cells. In animals, they become gametes. In plants and other organisms, they might divide more to create new cells or individuals.
Errors in Meiosis
Nondisjunction:
This is when chromosomes do not separate properly during meiosis.
It can happen during Anaphase I or Anaphase II.
Instead of moving to opposite sides of the cell, some chromosomes stay together.
Aneuploid Gametes:
These are sperm or egg cells with the wrong number of chromosomes.
They may have extra chromosomes or be missing chromosomes.
This happens because of nondisjunction.
Why is this important?
Aneuploidy is the most common cause of miscarriages (spontaneous abortion) in humans.
It can also cause genetic disorders like Down syndrome (extra chromosome 21).
Turner syndrome- loss of chromosomes on 45
Key Idea:
Errors in meiosis, especially nondisjunction, can lead to gametes with too many or too few chromosomes. This can cause miscarriages or genetic conditions.
Meiosis versus Mitosis (probably on the test)
Meiosis is different from mitosis in these four important ways:
Homologous Pairing and Crossing Over:
In Meiosis I, homologous chromosomes pair up and exchange DNA (crossing over).
This does not happen in mitosis.
Sister Chromatids Stay Together:
During Anaphase I of meiosis, sister chromatids stay attached at their centromeres.
They separate later in Anaphase II.
In mitosis, sister chromatids separate during Anaphase.
Kinetochore Attachment:
In Meiosis I, the spindle fibers attach to both sister chromatids as a single unit.
In mitosis, spindle fibers attach to each chromatid separately.
No DNA Replication Between Divisions:
DNA replication happens only once before Meiosis I.
There is no replication before Meiosis II, making it different from mitosis where replication happens before every division.
Meiosis creates four unique haploid cells, while mitosis creates two identical diploid cells. The differences above explain why meiosis leads to genetic diversity.
Alignment of chromosomes differs between meiosis I and mitosis
Meiosis I:
Chromosomes pair up (homologous chromosomes) and cross over.
During Metaphase I, these pairs line up together.
During Anaphase I, the pairs are pulled apart, but sister chromatids stay attached.
Mitosis:
Chromosomes line up single file (no pairing).
During Metaphase, they are arranged in a straight line.
During Anaphase, sister chromatids are pulled apart.
Key Difference:
Meiosis I: Pulls apart chromosome pairs (homologous chromosomes).
Mitosis: Pulls apart the two identical sister chromatids.
Comparison of meiosis and mitosis
Meiosis I
Prophase I:
Chromosomes pair up and cross over (mix DNA).
Metaphase I:
Pairs of chromosomes line up in the middle.
Anaphase I:
Pairs are pulled apart, but each chromosome still has two sister chromatids.
Telophase I:
Cell splits into two.
Each new cell has half the chromosomes.
Mitosis
Prophase:
Chromosomes don’t pair up.
Metaphase:
Chromosomes line up single-file in the middle.
Anaphase:
Sister chromatids are pulled apart.
Telophase:
Cell splits into two identical cells.
Meiosis II
Prophase II:
Chromosomes are ready (no pairing or crossing over like Meiosis I).
Metaphase II:
Chromosomes line up single-file in the middle.
Anaphase II:
Sister chromatids are pulled apart to opposite sides of the cell.
Telophase II:
Cells split.
Four unique cells are made, each with half the chromosomes (haploid).
Meiosis II is like mitosis, but it's happening in two cells at once and creates four unique haploid cells.
Attachment in Meiosis I:
In Meiosis I, sister chromatids stay together.
Their kinetochores (attachment points) are connected to the same pole.
This is different from mitosis and Meiosis II, where they are pulled apart.
Why This Happens:
The attachment is different because of the way the chromosomes are organized during Meiosis I.
It ensures that homologous chromosomes separate, not sister chromatids.
In Meiosis I, sister chromatids are kept together by attaching their kinetochores to the same pole. This helps them stay together until Meiosis II.
Why are the cells different?
Crossing over: Chromosomes swap parts during Prophase I.
Random orientation: Chromosomes line up randomly during Metaphase I.
Result:
Every cell made by meiosis is unique.
They have different combinations of genes.
Why is this important?
Variation is important for evolution.
It helps species adapt and survive in changing environments.
Sexual reproduction (using meiosis) creates much more genetic variety than asexual reproduction.
Mystery of heredity
A long time ago, people had simple ideas about how traits (like eye color or height) were passed from parents to children.
Traits stay within the same species:
Animals and plants pass their traits to their own kind. For example, dogs have puppies, and humans have babies.
Traits are passed directly from parents to children:
People believed traits were copied exactly from parents to children (offspring) without changing.
People thought traits mixed like liquids:
They believed traits blended together like mixing paint. For example, if a parent with blue eyes and a parent with brown eyes had a child, they thought the child would have eyes that were a mix of both, like green.
Problem: Why doesn’t everyone look the same?
If traits mixed like paint, everyone would eventually look the same. But people look different, so the idea of blending traits was wrong.
Early plant biologists produced hybrids with puzzling results
Josef Kölreuter (1760):
He mixed (crossed) different types of tobacco plants to see what the offspring would look like.
The hybrid plants looked different from their parents:
The baby plants didn’t look exactly like either parent. They had new traits.
The next generation (grandchildren) looked even more different:
When the hybrid plants had their own offspring, new traits appeared. This didn’t make sense if traits were just copied directly from parents.
These experiments showed that traits don’t just blend or copy directly. Something else was going on with how traits were passed down.
Crosses of the garden pea
T.A. Knight experimented with pea plants:
In 1823, Knight mixed (crossed) two types of pea plants called Pisum sativa.
He used true-breeding plants:
True-breeding plants always produce the same traits when they reproduce by themselves (self-fertilization). For example, tall plants only make tall plants.
What happened when he crossed them:
1st Generation (Kids): They all looked like only one of the parent plants.
2nd Generation (Grandkids): Some looked like one parent, and some looked like the other.
Traits can hide in one generation and show up again in the next. This was different from the idea that traits just blended.
Gregor Mendel
Gregor Mendel was a scientist who did important experiments with pea plants to figure out how traits are passed from parents to children.
Why Mendel used pea plants:
They were proven to make hybrids:
Other scientists had already shown that you could mix different types of pea plants to create hybrids (plants with new traits).
Many types of peas were available:
There were lots of different pea plants with different traits (like tall or short, purple flowers or white flowers).
Pea plants are small and easy to grow:
They grow quickly and don’t need a lot of space or special care.
Peas can fertilize themselves or be fertilized by another plant:
This made it easy for Mendel to control which plants mixed their traits.
Mendel carefully counted and studied the traits of pea plants over many generations. This helped him discover the basic rules of heredity.
Medel's experimental method
Mendel used a simple 3-step process to study how traits are passed down in pea plants.
Step 1: Make true-breeding plants (true-breeding strains).
He grew plants that always produced the same traits when they self-fertilized (for example, tall plants always made tall plants).
Step 2: Cross different true-breeding plants.
He mixed two plants with opposite traits (like purple flowers × white flowers).
Reciprocal crosses: To be sure it wasn’t just the pollen source causing changes, he switched which plant provided pollen (like using pollen from a white flower on a purple plant, and then the other way around).
Step 3: Count the traits in the next generations.
He let the hybrid plants (the children) self-fertilize and grow more generations.
He counted how many plants had each trait (like purple or white flowers) to see patterns.
Mendel’s careful counting and tracking of traits helped him figure out the basic rules of heredity.
How Mendel Conducted His Experiments
Cut off anthers (male parts) from the purple flower. - To prevent it from self-fertilizing.
Collect pollen from the white flower. - Using pollen from a different color plant.
Transfer white pollen to the purple flower. - Controlled cross-pollination.
All offspring are purple. - White trait is hidden but not gone.
Purpose: Mendel mixed different flowers to see how traits were passed down.
Monohybrid Crosses
Monohybrid Cross: Studying only one trait at a time with two variations (e.g., purple vs. white flowers).
Mendel tested seven traits:
Flower color, seed color, seed texture, pod color, pod shape, flower position, plant height.
Each trait had two options: For example, purple or white flowers.
Purpose: To see how traits are passed from parents to offspring.
Medel's seven traits
Mendel studied seven different traits in pea plants. For each trait, he used two versions (dominant and recessive). Every time, the dominant trait appeared three times more than the recessive trait (a 3:1 ratio).
Traits and Results:
Flower Color:
Purple (Dominant) vs. White (Recessive)
Ratio: 3:1 (705 Purple : 224 White)
Seed Color:
Yellow (Dominant) vs. Green (Recessive)
Ratio: 3:1 (6022 Yellow : 2001 Green)
Seed Texture:
Round (Dominant) vs. Wrinkled (Recessive)
Ratio: 3:1 (5474 Round : 1850 Wrinkled)
Pod Color:
Green (Dominant) vs. Yellow (Recessive)
Ratio: 3:1 (428 Green : 152 Yellow)
Pod Shape:
Inflated (Dominant) vs. Constricted (Recessive)
Ratio: 3:1 (882 Inflated : 299 Constricted)
Flower Position:
Axial (Dominant) vs. Terminal (Recessive)
Ratio: 3:1 (651 Axial : 207 Terminal)
Plant Height:
Tall (Dominant) vs. Short (Recessive)
Ratio: 3:1 (787 Tall : 277 Short)
For every 4 plants, 3 show the dominant trait, and 1 shows the recessive trait.
Example: If he grew 4 plants for flower color, 3 would be purple (dominant) and 1 would be white (recessive).
Mendel’s results were consistent across
F1 Generation
F₁ Generation (First Generation)
F₁ = First Filial Generation: The first group of plants grown from crossing two true-breeding plants.
All F₁ plants looked like one parent: For example, if Mendel crossed purple and white flowers, all the F₁ plants were purple.
Dominant Trait: The trait that shows up (like purple flowers).
Recessive Trait: The trait that is hidden (like white flowers).
No blending happened. The plants were either purple or white, not a mix of both.
F2 Generation
F₂ = Second Filial Generation: Made by letting the F₁ plants self-fertilize (breed with themselves).
Recessive trait reappeared: The hidden trait from F₁ (like white flowers) showed up again.
Ratio: For every 4 plants, about 3 showed the dominant trait and 1 showed the recessive trait (3:1 ratio).
The recessive trait didn’t disappear. It was just hidden in the F₁ generation and came back in the F₂ generation.
3:1 is actually 1:2:1
When Mendel looked closer at the F₂ generation, he found:
3 out of 4 plants showed the dominant trait (like purple flowers).
1 out of 4 plants showed the recessive trait (like white flowers).
It looked like a 3:1 ratio, but it was actually 1:2:1 when broken down:
1 plant = Pure Dominant (Always purple)
2 plants = Mixed (Sometimes purple, sometimes white)
1 plant = Pure Recessive (Always white)
The 3:1 ratio is really 1 pure dominant : 2 mixed : 1 pure recessive.
The F2 generation is a disguised 1:2:1 ratio
Parent Generation:
Crossed pure purple (dominant) with pure white (recessive).
F₁ Generation:
All flowers were purple (dominant trait shows, recessive is hidden).
F₂ Generation:
When F₁ plants self-fertilized, the results were:
3 Purple flowers (dominant)
1 White flower (recessive)
Ratio looks like 3:1 but it's really:
1 Pure Purple (True-breeding)
2 Mixed Purple (Non-true-breeding)
1 Pure White (True-breeding)
Real ratio = 1 : 2 : 1
F₃ Generation:
Pure-breeding plants (purple and white) always produce the same color.
Mixed plants can produce both purple and white flowers.
The 3:1 ratio is actually 1 pure dominant : 2 mixed : 1 pure recessive.
Conclusion
No Intermediate Traits:
The plants did not produce mixed traits. Each trait stayed separate and clear (intact, discrete).
Dominant and Recessive Traits:
For each trait pair, one was dominant (always seen) and the other was recessive (only seen when no dominant trait is present).
Segregation of Traits:
When plants reproduced, the traits separated (segregated) instead of blending.
F₂ Generation Ratio:
In the F₂ generation, traits always showed a ratio of ¾ dominant to ¼ recessive (3:1 ratio).\
Mendel found that traits remain separate and pass on in specific ratios, not as blended mixes.
Mendel's five- element model
Mendel’s five element model - refers to the core principles of inheritance
Genes are Passed from Parents:
Parents pass on genes (factors) to their offspring.
Each Individual Gets Two Copies of a Gene:
One gene copy comes from each parent (one from mom, one from dad).
Genes Can Be Different Versions:
Not all genes are the same. They can have different forms called alleles.
Allele: Different version of the same gene (example: purple vs. white flower color).
Homozygous: Having two of the same allele (e.g., purple + purple or white + white).
Heterozygous: Having two different alleles (e.g., purple + white).
Each individual has two copies of each gene, but the copies can be the same or different (homozygous or heterozygous).
Alleles Stay Separate (No Blending):
Genes keep their individual identities. They don’t mix or blend together.
Not All Alleles Are Seen:
Just having an allele doesn’t mean it shows up.
Dominant Allele: Always shows if it’s present.
Recessive Allele: Hidden if a dominant allele is present (only shows when two recessive alleles are together).
Genotype: The exact set of alleles (genes) a person or plant has.
Example: PP, Pp, or pp (P = purple, p = white).
Phenotype: The physical trait you can see.
Example: Purple flowers or white flowers. Pp
Principle of segregation
Alleles Separate During Reproduction:
Each parent gives one allele to the offspring.
The alleles separate when making eggs or sperm (gametes).
Alleles Rejoin Randomly:
When fertilization happens, alleles from each parent combine randomly.
Physical Basis:
This happens because of how chromosomes move during meiosis (a process of cell division).
Mendel didn’t know about chromosomes or meiosis. He figured this out from the ratios he saw (like 3:1).
Alleles are separated during gamete formation and then come back together randomly during fertilization.
Making a Punnett square
A Punnett square shows how alleles from parents combine to make offspring. Each box shows a possible combination.
Examples:
pp × pp (Recessive × Recessive):
All offspring = pp (Recessive).
PP × pp (Dominant × Recessive):
All offspring = Pp (Dominant shows because P is stronger).
pp × PP (Recessive × Dominant):
All offspring = Pp (Dominant shows because P is stronger).
PP × PP (Dominant × Dominant):
All offspring = PP (All Dominant).
Capital letter (P) = Dominant trait (like purple flowers).
Lowercase letter (p) = Recessive trait (like white flowers).
Pp = Dominant shows because P is stronger than p.
Purple (P) is stronger than white (p).
Using a Punnett square to analyze Mendel's cross
Parents (True-Breeding):
Purple Parent (PP) = Homozygous dominant (only makes P gametes).
White Parent (pp) = Homozygous recessive (only makes p gametes).
F₁ Generation (All Purple Heterozygotes):
Cross PP × pp → All offspring are Pp (Heterozygous).
All flowers are purple because P (dominant) hides p (recessive).
F₂ Generation (Using Punnett Square):
Cross two heterozygotes (Pp × Pp).
Gametes: P or p from each parent.
Offspring:
PP (Homozygous dominant, purple) - 1 (same)
Pp (Heterozygous, purple) - 2 (different)
pp (Homozygous recessive, white) - 1 (same)
Ratios:
Phenotypic Ratio (Visible Traits): 3 Purple : 1 White (3:1)
Genotypic Ratio (Gene Combinations): 1 PP : 2 Pp : 1 pp (1:2:1)
Homozygous dominant (PP): Pure purple.
Heterozygous (dominant) (Pp): Purple because P is dominant.
Homozygous recessive (pp): Pure white.
Dihybrid cross
A dihybrid cross studies two traits at the same time instead of just one.
Mendel’s Example:
Traits:
Shape: Round (R) vs. Wrinkled (r)
Color: Yellow (Y) vs. Green (y)
Parents (True-Breeding):
RR YY (Round Yellow) × rr yy (Wrinkled Green)
F₁ Generation (Dihybrid Heterozygotes):
All plants are Rr Yy (Round Yellow) because R and Y are dominant.
Only the dominant phenotypes show up (Round Yellow).
F₂ Generation (Self-Fertilization of F₁):
Cross Rr Yy × Rr Yy to see what combinations show up.
Dihybrid crosses help figure out if traits are inherited together or separately.
Dihybrid crosses produce a 9:3:3:1 ratio
Crossing Two Heterozygous Plants:
Rr Yy × Rr Yy (Round Yellow × Round Yellow)
This cross produces four different phenotypes (traits you can see).
F₂ Generation Phenotypes:
Round Yellow (R_Y_) = 9
Round Green (R_ yy) = 3
Wrinkled Yellow (rr Y_) = 3
Wrinkled Green (rr yy) = 1
Ratio:
9 : 3 : 3 : 1
(Round Yellow) : (Round Green) : (Wrinkled Yellow) : (Wrinkled Green)
Mendel found that traits are inherited independently of each other, producing a 9:3:3:1 ratio in the F₂ generation.
Analyzing a dihybrid cross
What Mendel Did:
Crossed two pea plants with two traits:
Shape: Round (R) or Wrinkled (r)
Color: Yellow (Y) or Green (y)
Parents: RrYy × RrYy (Both Round Yellow)
What Happened (F₂ Generation):
9 out of 16 = Round & Yellow (Both traits are dominant)
3 out of 16 = Round & Green (Round is dominant, Green is recessive)
3 out of 16 = Wrinkled & Yellow (Wrinkled is recessive, Yellow is dominant)
1 out of 16 = Wrinkled & Green (Both traits are recessive)
Ratio:
9 : 3 : 3 : 1
(Round Yellow) : (Round Green) : (Wrinkled Yellow) : (Wrinkled Green)
Mendel found that traits are inherited separately (shape and color don’t affect each other).
This is why he got the 9:3:3:1 pattern.
Principle of independent assortment
What It Means:
When Mendel crossed two traits (like shape and color), each trait was passed on separately.
Traits Don't Affect Each Other:
Example: Seed shape (Round or Wrinkled) is separate from Seed color (Yellow or Green).
They don’t mix or affect each other.
Why This Happens:
During meiosis (making eggs or sperm), chromosomes line up randomly.
This random lineup makes sure that traits are passed on independently.
Shape and color are inherited separately, not as a package.
This is why you get the 9:3:3:1 ratio in dihybrid crosses.
Extensions to Mendel
Mendel’s rules work well for pea plants, but they don’t always work for other traits.
What is the reason?
Single Gene Control:
Mendel thought each trait was controlled by one gene.
But many traits are controlled by multiple genes.
Only Two Alleles:
Mendel’s model uses two alleles (like P and p).
But some genes have more than two alleles (example: blood types - A, B, O).
Clear Dominant-Recessive Relationship:
Mendel thought one allele was always dominant and the other was recessive.
But some traits can be mixed or both can show up (example: red + white = pink).
Mendel’s model is simple, but most traits are more complicated.
Environmental influence
Environment Affects Traits:
The environment can change how a trait looks (phenotype).
Phenotypic Plasticity:
The same gene can show different traits depending on the environment.
Example: Siamese Cats and Himalayan Rabbits:
Their fur color depends on temperature.
Below 30°C: Fur turns dark (enzyme works).
Above 33°C: Fur stays light (enzyme doesn't work).
Why This Happens:
The gene makes an enzyme that only works at cool temperatures.
This is why ears, paws, and tails (cooler areas) are dark.
The environment can change how a gene shows up.
Continuous variation
What is Continuous Variation?
Traits that have many possible versions, not just one or two.
Example: Height, skin color, hair color (not just tall or short, but many heights).
Why This Happens:
Multiple genes work together to produce a trait.
Each gene adds a small effect to the overall appearance.
Quantitative Traits:
Traits that show continuous variation are called quantitative traits.
Example: Height can be measured on a scale, not just tall or short.
More Common:
Traits controlled by multiple genes are more common than traits controlled by single genes (like Mendel’s peas).
Environment and heritability
Heritability measures how much of a trait is due to genes and how much is due to the environment.
Broad Sense Heritability (H²):
Measures all genetic influences on a trait.
Includes genes, dominance, and gene interactions.
Example: How much of height is due to all genes together.
Narrow Sense Heritability (h²):
Measures specific genes that are passed down from parents to offspring.
Only focuses on additive genes (the ones that add up directly).
Example: How much of height is due to specific genes from parents.
What is H2 and h2?
H² = All Genes
Measures every gene that affects a trait.
Example: All the genes that can affect height.
h² = Parent Genes Only
Measures only the genes passed directly from parents.
Example: The specific height genes you got from mom and dad.
Environment Matters Too:
Things like food, temperature, and lifestyle can change traits.
Example: Bad nutrition can make someone shorter, even if their genes say they should be tall.
H² = All genes, even the extra ones.
h² = Just the genes from your parents.
Environment can change your traits, even if your genes are the same.
Height is a continuously varying trait
What is h²?
h² = Heritability. It shows how much of a trait (like height) is from genes passed from parents.
In the Graph:
Blue dots = Boys,
Red squares = Girls.
The line shows how much height comes from genes.
What the Line Means:
Steep line (high h²) = Height is mostly from genes. Kids are a lot like their parents.
Flat line (low h²) = Height is less from genes. Kids are less like their parents.
Closer to the Line = More Genetic (High h²):
If dots or squares are near the line, height is mostly genetic.
Farther from the Line = More Environment (Low h²):
If dots or squares are far from the line, height is affected by other things like food or health.
The blue line (boys) is steeper than the red line (girls).
Boys’ height seems more influenced by genes than girls’ height.
Pleiotropy
What is Pleiotropy?
When one gene affects many different traits.
Why It’s Complicated:
A gene that does one thing might also do other things you don’t expect.
Examples:
Cystic Fibrosis: One defective gene causes lung, digestive, and sweat problems.
Sickle Cell Anemia: One gene causes blood problems, pain, organ damage, and more.
One gene → Many effects.
If the gene is faulty, it can cause multiple symptoms or problems.
Multiple alleles
What Are Multiple Alleles?
When a gene has more than two versions (alleles) in a population.
Example: Blood Types (ABO System)
There are three alleles: A, B, O.
Even though there are three alleles, each person only has two (like A and O or B and B).
More than two alleles exist, but you only inherit two (one from each parent).
Most traits have more than two alleles in a population.
Multiple alleles means more choices, but you only get two.
Example: Blood types A, B, AB, O are made from three alleles (A, B, O).
Dominance is not always complete
Incomplete Dominance:
Mixing of traits.
Heterozygote (mixed genes) shows a blended result.
Example: Red flowers × White flowers = Pink flowers (Mix of both).
Codominance:
Both traits show up fully.
Heterozygote shows both traits clearly, not blended.
Example: Type AB blood (Both A and B are present equally).
Incomplete Dominance: Mixes traits (Red + White = Pink).
Codominance: Both traits show equally (A and B in blood type).
Incomplete dominance
What Happened:
Crossed Red Flowers (CᴿCᴿ) with White Flowers (CʷCʷ).
Result:
All offspring (F₁ generation) are Pink (CᴿCʷ).
Why Pink?
Neither Red nor White is completely dominant.
The result is a mix of both = Pink.
This is called Incomplete Dominance, not blending inheritance.
Incomplete dominance is when two traits mix but don't completely cover each other.
Red + White = Pink.
What’s Happening:
Pink flowers (CᴿCʷ) are crossed with themselves (self-crossed).
Prediction:
The results will be in a 1:2:1 ratio.
1 Red (CᴿCᴿ)
2 Pink (CᴿCʷ)
1 White (CʷCʷ)
Why This Happens:
Pink is incomplete dominance. It’s not a blend, just a mix of Red and White.
When you cross two pink flowers, you get all three colors (Red, Pink, White).
Conclusion:
Incomplete dominance is real. The results match the expected ratio.
Key Point:
Self-crossing Pink (CᴿCʷ) flowers gives: 1 Red : 2 Pink : 1 White.
Human ABO blood group
The ABO blood group system shows two important concepts:
Multiple Alleles:
Three alleles: Iᴬ, Iᴮ, i
Even though there are three alleles, each person only has two (example: IᴬIᴮ or Iᴬi).
Codominance:
Iᴬ and Iᴮ are dominant over i.
Iᴬ and Iᴮ are codominant to each other, which means both show up if they are together.
Example: IᴬIᴮ = Type AB blood (Both A and B are seen, not mixed).
Type A = IᴬIᴬ or Iᴬi
Type B = IᴮIᴮ or Iᴮi
Type AB = IᴬIᴮ (Both show up)
Type O = ii (No A or B)
Epistasis
What is Epistasis?
When one gene hides or changes the effect of another gene.
Example: Labrador Retriever Coat Color
Controlled by two genes: Brown and Extension.
These genes interact and affect the coat color.
Expected vs. Actual Colors:
Normally, two genes would give four colors.
But because of epistasis, there are only three coat colors:
Black
Brown (Chocolate)
Yellow
Epistasis changes how genes work together, making some traits disappear or change.
Two Genes Control Color:
B (Black) / b (Brown) - Controls black or brown color.
E (Extension) / e (No Color) - Controls if the color shows up.
How it Works:
If E is present (E_), the coat will be Black or Brown.
If ee is present, the coat will be Yellow—no matter what the B gene says.
Possible Colors (Based on Genotype):
Black: BBEE, BbEE, BBEe, BbEe
Brown (Chocolate): bbEE, bbEe
Yellow: BBee, Bbee, bbee
Summary:
9 Black : 3 Brown (Chocolate) : 4 Yellow (Typical epistasis ratio).
The ee gene blocks the black or brown color, making the dog yellow.
Homozygous A. phenotype A. purple flower, tall plant
Chromosomal theory of Inheritance
Carl Correns (1900)
First to say chromosomes are important for inheritance.
Helped bring attention back to Mendel’s work on genetics.
Walter Sutton (1902)
Came up with the Chromosomal Theory of Inheritance.
He noticed that chromosomes pair up and separate during meiosis, just like genes do.
Traits are passed down through chromosomes, because genes live on chromosomes!
Eye Color in Fruit Flies (T.H. Morgan, 1910)
What happened?
T.H. Morgan worked with fruit flies (Drosophila).
He found a mutant male with white eyes (normally they’re red).
He crossed the white-eyed male with a normal red-eyed female.
What did he see in the offspring (F₁)?
All babies had red eyes → this means red eyes are dominant over white.
Traits like eye color can be inherited and one can be stronger (dominant) than another.
The eye color gene resides on the X chromosomes
The eye color gene is on the X chromosome
Morgan let F₁ females and F₁ males mate (both had red eyes) (this is what "crossed" means).
Their babies (F₂ generation) had both red-eyed and white-eyed flies.
But only males had white eyes.
This showed that the white-eye gene is on the X chromosome.
What else did he do?
He did a test cross (special mating) with an F₁ female and a white-eyed male.
Some of the female babies did get white eyes, proving it's not deadly — just depends on which X chromosome they get.
What did he figure out?
The gene for eye color is on the X chromosome (not the Y).
These kinds of traits are called sex-linked traits, because they’re passed on through sex chromosomes.
Sex chromosomes
Sex chromosomes are a special pair of chromosomes that decide if an organism is male or female.
Even though X and Y don’t look the same, they still work together during cell division.
In fruit flies (Drosophila):
If a fly has 2 X chromosomes, it’s a female.
If a fly has 1 X and 1 Y chromosome, it’s a male.
Easy way to remember:
XX = Girl
XY = Boy
Parental Generation (P):
Who is crossed?
Red-eyed mom (XᴿXᴿ)
White-eyed dad (XʷY)
What happens?
All babies (F₁) have red eyes
→ because they all get one red gene (Xᴿ) from mom
→ and red is stronger than white (red is dominant)
P = the original parents
F₁ = their kids
F₂ = the grandkids (when the F₁ kids have babies)
F₁ Generation Cross:
Now we cross the F₁ kids:
A red-eyed girl (XᴿXʷ)
A red-eyed boy (XᴿY)
What are the babies (F₂)?
Girls all have red eyes (they get at least one Xᴿ)
Boys can have:
Red eyes (XᴿY)
White eyes (XʷY)
Only the boys can show white eyes here!
Because they only have one X, so if it’s the white one, there’s nothing to cover it up.
Boys show white eyes more often because they have only one X
Sex determination
What is Sex Determination?
Sex determination is how an organism develops into either a male or a female. This is based on the types of sex chromosomes an organism has.
In Humans (and fruit flies):
XX = female
XY = male
The Y chromosome causes the development of male characteristics.
In Birds:
ZZ = male
ZW = female
Here, it's the W chromosome that determines femaleness (opposite of humans).
In Some Insects (like grasshoppers):
XX = female
XO = male
"O" means there is no second sex chromosome. So males only have one X.
Females (Diploid)
Have two sets of chromosomes (one from each parent).
This includes worker bees and the queen bee.
They are made from fertilized eggs.
Males (Haploid)
Have only one set of chromosomes (from the mother only).
These are the drones (male bees).
They come from unfertilized eggs.
Sex chromosomes in human
How many chromosomes do humans have?
46 total chromosomes
23 pairs total
22 pairs are called autosomes (non-sex chromosomes)
1 pair is for sex determination
What are sex chromosomes?
Females = XX
Males = XY
The X chromosome is much bigger than the Y chromosome.
What’s special about the Y chromosome?
It is small and condensed (doesn't carry many genes).
It carries a gene called SRY, which is needed to develop male characteristics.
If there is no Y, the body defaults to female development.
Some Human Traits Inherit in Dominant or Recessive Ways
Some traits are caused by just one gene.
Like eye color or genetic diseases.
These traits can be:
Dominant (autosomal dominant)– only need one copy of the gene to show the trait.
Recessive (autosomal ressecive) – need two copies of the gene to show the trait.
Pedigree Analysis
It’s like a family tree used to track how traits are passed down.
Helps scientists and doctors see patterns of inheritance.
Examples:
Dominant pedigree example – juvenile glaucoma
Glaucoma: Eye disease caused by increased pressure, damages the optic nerve → can lead to blindness.
Only one dominant allele needed to inherit the condition.
Recessive pedigree example – albinism
Albinism: Genetic condition with little or no pigment in skin, hair, eyes → vision problems common.
Two recessive alleles needed (one from each parent) to show the trait.
Dominant pedigree for hereditary juvenile glaucoma
Juvenile Glaucoma – Dominant Trait
What it is: Eye disease that damages the optic nerve, can lead to blindness.
Inheritance: Caused by a dominant allele — only one copy needed to show the disease.
Pattern in the Pedigree:
Shows up in every generation (because it's dominant).
Shaded shapes = affected individuals.
Squares = males, Circles = females.
Albinism – Recessive Trait
What it is: A condition where melanin (pigment for skin, hair, eyes) is not made.
Cause: Due to a nonworking enzyme (tyrosinase).
Inheritance: It’s recessive — must have 2 copies of the defective gene to have albinism.
Pattern in the Pedigree:
Males and females are affected equally.
Most affected individuals have parents who are carriers (unaffected but have one bad gene).
Shaded shapes = affected.
Half-shaded = carrier (only one recessive allele).
They have one copy of the recessive gene (the version that causes the condition).
But they don’t show symptoms because they also have one normal (dominant) allele.
What is a Sex-Linked Disorder?
A disorder linked to the X chromosome.
These disorders usually affect males more than females.
What is Hemophilia?
A genetic disease where the blood doesn’t clot properly.
A small injury can cause dangerous bleeding.
Caused by a mutation on the X chromosome (called X-linked).
Females: Carriers, Not Affected
Females have two X chromosomes.
If only one X has the disease, the other healthy X protects them.
These females are called carriers — they carry the disease gene, but don’t have symptoms.
Males: More Likely to Be Affected
Males have only one X chromosome (and one Y).
If that one X has the hemophilia gene, there's no backup, so they get the disease.
Sickle Cell Anemia (Genetic Disorder Cause)
What happens?
One tiny change in a protein (just one amino acid!) causes big problems.
What it affects:
A protein called hemoglobin, which carries oxygen in red blood cells.
Result:
Red blood cells become misshaped (sickle-shaped) and can’t carry oxygen properly.
Symptoms
Anemia (low red blood cell count)
Painful episodes (sickle cell crises)
Fatigue
Jaundice (yellowing of the skin and eyes)
Swelling in the hands and feet
Delayed growth and development in children
Increased risk of infections
Homozygous (2 sickle cell genes):
Person has the disease → gets sick on and off, may have a shorter life.
Heterozygous (1 sickle cell gene + 1 normal gene):
Person is mostly healthy, but has weaker hemoglobin.
Why is it more common in some populations?
People with 1 sickle cell gene are more resistant to malaria, a deadly disease common in Africa.
This is why sickle cell is more frequent in people of African descent—it's nature’s way of offering protection.
Nondisjunction and Chromosome Number
Nondisjunction -is the failure of homologues or sister chromatids to separate properly during meiosis (when chromosomes don't separate correctly during meiosis) (cell division for sperm/egg).
This leads to:
Aneuploidy –gain or loss of a chromosome, the result of nondisjunction (wrong number of chromosomes)
Monosomy = one missing chromosome
Trisomy = one extra chromosome
Most embryos with this don’t survive.
Nondisjunction of Autosomes (Body Chromosomes)
Some trisomies can survive birth:
Chromosomes 13, 15, 18 → very serious conditions; babies usually die young
Chromosomes 21 and 22 → can survive to adulthood
Down Syndrome = Trisomy 21
Extra chromosome 21
May be a full extra chromosome or part of one
Risk increases with mother’s age
On the 21st chromosome there’s an extra one.
Women that are older who have children tend to have children with down syndrome.
Nondisjunction of sex chromosomes
XXX – Triple-X Female
Has 3 X chromosomes
Usually normal, may be taller than average
XXY – Klinefelter Syndrome (Male)
Extra X in males
May be taller, less body hair, reduced fertility
XO – Turner Syndrome (Female)
Missing one X chromosome
Short height, may not go through puberty normally, infertile
OY – Nonviable
No X chromosome
Embryo does not survive
XYY – Jacob Syndrome (Male)
Extra Y chromosome
Usually normal, may be taller, sometimes learning delays
These are caused by nondisjunction: when chromosomes don’t separate properly during meiosis.
Results in too many or too few sex chromosomes.
Most people with these are alive and may appear mostly normal, but some may have mild differences in growth, learning, or fertility.
Some genetic defects can be detected early in pregnancy
Detecting Genetic Disorders Early in Pregnancy
Genetic counseling:
Helps parents find out if they carry genes for inherited diseases.
Pedigree analysis:
Tracks family history to see the chance of a genetic disorder in a baby.
Amniocentesis:
Test that takes cells from amniotic fluid (around the baby) to check for genetic problems.
Chorionic villus sampling (CVS):
Takes cells from the placenta to test for genetic conditions earlier in pregnancy.
Amniocentesis
A needle is used to take amniotic fluid from around the baby.
This fluid has cells from the baby that can be tested for genetic problems.
Usually done around 15–20 weeks of pregnancy.
To check for genetic conditions early, such as Down syndrome or other inherited diseases.
Helps parents make informed decisions.
Chorionic Villus Sampling (CVS)
A small tube or needle collects cells from the placenta (specifically the chorionic villi).
Tests for the same disorders but can be done earlier, around 10–13 weeks.
To check for genetic conditions early, such as Down syndrome or other inherited diseases.
Helps parents make informed decisions.