Metals and Non-metals Summary Notes

Physical Properties of Metals and Non-Metals

  • Metallic Lustre: Metals in their pure state possess a shining surface.
  • Hardness: Metals are generally hard, though hardness varies by metal. Alkali metals like lithium (LiLi), sodium (NaNa), and potassium (KK) are soft enough to be cut with a knife and possess low densities and low melting points.
  • Malleability: Metals can be beaten into thin sheets; gold (AuAu) and silver (AgAg) are the most malleable metals.
  • Ductility: Metals can be drawn into thin wires; gold is the most ductile metal (a wire of about 2 km2\,km length can be drawn from 1 g1\,g of gold).
  • Thermal Conductivity: Metals are good conductors of heat and have high melting points. Silver (AgAg) and copper (CuCu) are the best conductors, whereas lead (PbPb) and mercury (HgHg) are comparatively poor conductors.
  • Electrical Conductivity: Metals conduct electricity; current-carrying wires are coated with polyvinylchloride (PVC) or rubber-like insulating material.
  • Sonority: Metals produce a ringing sound when striking a hard surface.
  • Non-Metals: Non-metals exist as solids or gases, except bromine (Br2Br_2) which is a liquid.
  • Physical Exceptions:
    • Mercury (HgHg) is the only liquid metal at room temperature.
    • Gallium (GaGa) and caesium (CsCs) have very low melting points and melt on the palm.
    • Iodine (I2I_2) is a non-metal that exhibits lustre.
    • Carbon (CC) allotropes: Diamond is the hardest natural substance with exceptionally high melting and boiling points; graphite is a good conductor of electricity.

Chemical Properties of Metals

  • Reaction with Oxygen:

    • Almost all metals combine with oxygen to form basic metal oxides (Metal+Oxygen→Metal oxide\text{Metal} + \text{Oxygen} \rightarrow \text{Metal oxide}).
    • Copper forms black copper(II) oxide when heated: 2Cu+O2→2CuO2Cu + O_2 \rightarrow 2CuO.
    • Amphoteric Oxides: Metal oxides such as aluminium oxide (Al2O3Al_2O_3) and zinc oxide (ZnOZnO) react with both acids and bases to produce salt and water:
    • Al2O3+6HCl→2AlCl3+3H2OAl_2O_3 + 6HCl \rightarrow 2AlCl_3 + 3H_2O
    • Al2O3+2NaOH→2NaAlO2+H2OAl_2O_3 + 2NaOH \rightarrow 2NaAlO_2 + H_2O
    • Alkalis: Dissolvable basic oxides like sodium oxide (Na2ONa_2O) and potassium oxide (K2OK_2O) dissolve in water to form alkalis:
    • Na2O(s)+H2O(l)→2NaOH(aq)Na_2O(s) + H_2O(l) \rightarrow 2NaOH(aq)
    • K2O(s)+H2O(l)→2KOH(aq)K_2O(s) + H_2O(l) \rightarrow 2KOH(aq)
    • Reactivity differences: Sodium (NaNa) and potassium (KK) react vigorously and catch fire in open air, so they are kept immersed in kerosene oil. Metals like magnesium (MgMg), aluminium (AlAl), zinc (ZnZn), and lead (PbPb) form a thin protective oxide layer at ordinary temperatures.
    • Anodising: An electrolytic process using dilute sulphuric acid to form a thick, corrosion-resistant protective layer of aluminium oxide on aluminium articles.
  • Reaction with Water:

    • Metals produce metal oxide and hydrogen gas; soluble oxides form metal hydroxides:
    • Metal+Water→Metal oxide+H2\text{Metal} + \text{Water} \rightarrow \text{Metal oxide} + H_2
    • Metal oxide+Water→Metal hydroxide\text{Metal oxide} + \text{Water} \rightarrow \text{Metal hydroxide}
    • Violent exothermic reaction with cold water: Potassium (2K(s)+2H2O(l)→2KOH(aq)+H2(g)+heat energy2K(s) + 2H_2O(l) \rightarrow 2KOH(aq) + H_2(g) + \text{heat energy}) and sodium (2Na(s)+2H2O(l)→2NaOH(aq)+H2(g)+heat energy2Na(s) + 2H_2O(l) \rightarrow 2NaOH(aq) + H_2(g) + \text{heat energy}).
    • Calcium (Ca(s)+2H2O(l)→Ca(OH)2(aq)+H2(g)Ca(s) + 2H_2O(l) \rightarrow Ca(OH)_2(aq) + H_2(g)) reacts less violently and floats as hydrogen bubbles adhere to its surface.
    • Magnesium (MgMg) reacts with hot water and floats.
    • Aluminium, iron, and zinc react only with steam:
    • 2Al(s)+3H2O(g)→Al2O3(s)+3H2(g)2Al(s) + 3H_2O(g) \rightarrow Al_2O_3(s) + 3H_2(g)
    • 3Fe(s)+4H2O(g)→Fe3O4(s)+4H2(g)3Fe(s) + 4H_2O(g) \rightarrow Fe_3O_4(s) + 4H_2(g)
    • Lead, copper, silver, and gold do not react with water.
  • Reaction with Acids:

    • Metals react with dilute acids to yield salt and hydrogen gas (Metal+Dilute acid→Salt+H2\text{Metal} + \text{Dilute acid} \rightarrow \text{Salt} + H_2).
    • Nitric acid (HNO3HNO_3) oxidises evolved H2H_2 gas to water; only magnesium (MgMg) and manganese (MnMn) react with very dilute HNO3HNO_3 to produce H2H_2 gas.
    • Reactivity order with dilute HClHCl: Mg>Al>Zn>FeMg > Al > Zn > Fe. Copper does not react with dilute HClHCl.
    • Aqua Regia: A freshly prepared 3:13:1 mixture of concentrated HClHCl and concentrated HNO3HNO_3 capable of dissolving gold (AuAu) and platinum (PtPt).
  • Displacement Reactions:

    • A more reactive metal displaces a less reactive metal from its salt solution (Metal A+Salt solution of B→Salt solution of A+Metal B\text{Metal A} + \text{Salt solution of B} \rightarrow \text{Salt solution of A} + \text{Metal B}).

The Reactivity Series

  • Relative Reactivities: Metals arranged in decreasing order of reactivity:
    • KK (Potassium) - Most reactive
    • NaNa (Sodium)
    • CaCa (Calcium)
    • MgMg (Magnesium)
    • AlAl (Aluminium)
    • ZnZn (Zinc)
    • FeFe (Iron)
    • PbPb (Lead)
    • [H][H] [Hydrogen]
    • CuCu (Copper)
    • HgHg (Mercury)
    • AgAg (Silver)
    • AuAu (Gold) - Least reactive

Formation and Properties of Ionic Compounds

  • Electronic Basis: Atoms react to achieve a completely filled valence shell (octet structure), matching noble gas configurations.
  • Formation of Ionic Compounds: Transferred electrons move from a metal (cation formation) to a non-metal (anion formation).
    • Sodium chloride (NaClNaCl) formation:
    • Na→Na++e−Na \rightarrow Na^+ + e^- (2,8,1→2,82,8,1 \rightarrow 2,8
    • Cl+e−→Cl−Cl + e^- \rightarrow Cl^- (2,8,7→2,8,82,8,7 \rightarrow 2,8,8
    • Magnesium chloride (MgCl2MgCl_2) formation:
    • Mg→Mg2++2e−Mg \rightarrow Mg^{2+} + 2e^- (2,8,2→2,82,8,2 \rightarrow 2,8
    • Cl+e−→Cl−Cl + e^- \rightarrow Cl^- (2,8,7→2,8,82,8,7 \rightarrow 2,8,8
  • General Properties:
    • Physical Nature: Solid, hard, and brittle, held together by strong inter-ionic electrostatic forces.
    • Melting and Boiling Points: High melting points (e.g., NaClNaCl melts at 1074 K1074\,K) due to large energy required to break ionic bonds.
    • Solubility: Soluble in water; insoluble in organic solvents like kerosene and petrol.
    • Conduction of Electricity: Conducts electricity in molten state or aqueous solution via free movement of ions; non-conductive in solid state due to rigid structure.

Extraction and Refining of Metals

  • Terms:
    • Minerals: Naturally occurring elements or compounds in the earth's crust.
    • Ores: Minerals containing a high percentage of a metal that can be extracted profitably.
    • Gangue: Sand, soil, and earthly impurities contaminate mined ores.
  • Extraction Methods:
    • Low Reactivity Metals: Reduced by heating alone (e.g., cinnabar 2HgS(s)+3O2(g)→Heat2HgO(s)+2SO2(g)2HgS(s) + 3O_2(g) \xrightarrow{\text{Heat}} 2HgO(s) + 2SO_2(g) followed by 2HgO(s)→Heat2Hg(l)+O2(g)2HgO(s) \xrightarrow{\text{Heat}} 2Hg(l) + O_2(g)).
    • Medium Reactivity Metals:
    • Roasting: Heating sulphide ores strongly in excess air (2ZnS(s)+3O2(g)→Heat2ZnO(s)+2SO2(g)2ZnS(s) + 3O_2(g) \xrightarrow{\text{Heat}} 2ZnO(s) + 2SO_2(g)).
    • Calcination: Heating carbonate ores strongly in limited air (ZnCO3(s)→HeatZnO(s)+CO2(g)ZnCO_3(s) \xrightarrow{\text{Heat}} ZnO(s) + CO_2(g)).
    • Reduction: Oxide reduced using carbon (ZnO(s)+C(s)→Zn(s)+CO(g)ZnO(s) + C(s) \rightarrow Zn(s) + CO(g)) or displacement by reactive metals.
    • Thermit Process: Exothermic reduction of iron(III) oxide with aluminium powder (Fe2O3(s)+2Al(s)→2Fe(l)+Al2O3(s)+HeatFe_2O_3(s) + 2Al(s) \rightarrow 2Fe(l) + Al_2O_3(s) + \text{Heat}) yields molten iron used to weld railway tracks.
    • High Reactivity Metals: Extracted by electrolytic reduction of molten salts (e.g., molten NaClNaCl: cathode reaction Na++e−→NaNa^+ + e^- \rightarrow Na; anode reaction 2Cl−→Cl2+2e−2Cl^- \rightarrow Cl_2 + 2e^-).
  • Electrolytic Refining: Impure metal acts as anode, pure metal strip as cathode, and acidified metal salt solution acts as electrolyte. Pure metal deposits on cathode while insoluble impurities settle as anode mud.

Electrolytic refining of copper

Corrosion and Prevention

  • Corrosion Phenomena:
    • Silver tarnishes black in air due to silver sulphide (Ag2SAg_2S) formation.
    • Copper develops a green coating of basic copper carbonate when exposed to moist carbon dioxide (CO2CO_2).
    • Iron forms flaky brown rust when exposed simultaneously to both air and water.
  • Prevention Techniques: Painting, oiling, greasing, galvanising, chrome plating, anodising, or alloying.
    • Galvanisation: Coating steel or iron with a thin protective layer of zinc (ZnZn).
  • Alloys: Homogeneous mixtures of two or more metals, or a metal and a non-metal.
    • Steel: Iron mixed with 0.05%0.05\% carbon (CC); stainless steel contains iron mixed with nickel (NiNi) and chromium (CrCr).
    • Brass: Alloy of copper (CuCu) and zinc (ZnZn).
    • Bronze: Alloy of copper (CuCu) and tin (SnSn).
    • Solder: Alloy of lead (PbPb) and tin (SnSn) with a low melting point used for joining electric wires.
    • Amalgam: Any alloy containing mercury (HgHg).
    • Gold Standard: Pure gold is 2424 carat; 2222 carat gold consists of 2222 parts pure gold alloyed with 22 parts copper (CuCu) or silver (AgAg).