Basic Guide to Dental Procedures: Comprehensive Study Guide
Preventive Dental Techniques
- Preventive dental procedures aim to reduce a patient's risk of developing dental caries, maintaining long-term oral health.
Fissure Sealants
- Background and Rationale:
- Any surface area of a tooth that is difficult for a patient to clean acts as a stagnation area where food debris and plaque accumulate.
- Plaque is a soft, sticky film composed of food debris and oral bacteria that forms continuously on teeth.
- Primary stagnation areas include occlusal pits and fissures on posterior teeth, particularly the first permanent molars which erupt at approximately of age.
- Occlusal fissures occur on the biting surfaces, whereas pits are typically located on the buccal (cheek-side) surfaces.
- First permanent molars are highly susceptible to caries because:
- They erupt behind the deciduous teeth at the back of the mouth, making them physically difficult for young children to reach.
- They erupt at an age () before effective toothbrushing habits and manual dexterity have fully developed.
- Younger patients frequently consume diets higher in refined sugars without understanding dietary control.

- Materials Used:
- Unfilled resins.
- Flowable composites.
- Glass ionomer cements (GIC).
- Compomers (a hybrid material combining glass ionomer cement and composite resin).


- Clinical Technique:
- The operator and patient wear personal protective equipment (PPE).
- The target tooth is strictly isolated from saliva contamination using cotton wool rolls and low-speed suction (saliva ejector), as sealant materials will not bond to wet enamel.
- Occlusal pits and fissures are chemically etched with acid (typically phosphoric acid) to micro-roughen the enamel surface.
- The acid etch is thoroughly washed off with water, and the tooth is dried until the etched enamel displays a characteristic chalky white appearance.
- Unfilled resin is flowed into the etched pits and fissures and cured (hardened) using a blue light-curing lamp to lock it mechanically into the enamel structure.
- If minor enamel demineralisation is present within the fissure, a flowable composite or compomer is utilized to restore the surface before sealing.
Topical Fluoride Application
- Background and Rationale:
- Interproximal (interdental) contact points between adjacent teeth are highly vulnerable to plaque accumulation and dental caries.
- High-concentration topical fluorides incorporate fluoride ions into the enamel crystal structure, forming fluorapatite, which increases acid resistance.
- Indications for full-mouth professional topical fluoride application include:
- Children and vulnerable adults with high caries activity.
- Patients undergoing fixed orthodontic appliance treatment (braces).
- Adults with elevated caries risk due to heavily restored dentitions, persistent xerostomia (dry mouth) caused by medical conditions or medications.
- Physically disabled patients who cannot perform thorough mechanical plaque control.
- Medically compromised patients (such as haemophiliacs or those with severe cardiac defects) for whom surgical dental extractions pose extreme health risks.

Full-Mouth Application Technique:
- PPE is donned by the clinician and patient.
- Teeth are cleaned and polished using a pumice slurry to remove pellicle and plaque, ensuring maximum direct contact between fluoride and enamel.
- The slurry is washed away completely, and the dental arches are dried.
- Moisture control and soft tissue retraction are maintained using cotton wool rolls and suction.
- A viscous fluoride gel or varnish (such as sodium fluoride varnish containing fluoride) is applied manually to all accessible tooth surfaces using micro-applicator brushes, treating one arch at a time.
- Manual application using micro-brushes is preferred over preformed fluoride tray loading, as it is better tolerated by patients and minimizes fluoride ingestion.
Specific Tooth Application:
- Targeted fluoride varnish application is used for isolated enamel brown-spot lesions (indicating arrested or active sub-surface demineralisation), areas of gingival recession, or toothbrush abrasion exposing root dentine.
- The varnish is painted directly onto the affected root or enamel site following moisture isolation.
Oral Hygiene Instruction and Dietary Advice
- Oral hygiene instruction aims to optimize mechanical plaque removal from tooth surfaces and gingival margins, preventing dental caries and periodontal disease.
- Dietary advice targets the reduction of refined free sugars and dietary acids to eliminate carious and erosive challenges.
Disclosing Agents
- Mechanism and Properties:
- Disclosing agents contain harmless vegetable dyes supplied as tablets, liquids, or solutions (such as food colourings).
- They stain soft bacterial plaque (which is naturally creamy-white and inconspicuous) a vibrant red or blue colour.
- Dyes do not stain clean enamel, dentine, or restorative materials, but will stain plaque present on soft tissues such as the dorsal tongue.



- Clinical Application Protocol:
- A protective bib is secured over the patient's chest to prevent clothing stains.
- The patient chews one disclosing tablet for , swishing the stained saliva around all teeth, then spits out the excess without rinsing with water.
- Using a hand mirror, the clinician highlights areas of heavy plaque accumulation, particularly along cervical gingival margins and interproximal spaces.
- Targeted toothbrushing and interdental cleaning techniques are demonstrated and immediately practiced by the patient under clinical supervision until all dye is removed.
Toothbrushing Methods
- Principles:
- Manual and power toothbrushing remove plaque from buccal, labial, lingual, palatal, and occlusal surfaces.
- Toothbrushes cannot penetrate tight interdental contact points unless advanced sonic electric brushes or specialized interdental attachments are used.
- A good quality toothbrush features a small head for maneuverability, multi-tufted medium synthetic (nylon) bristles, and a comfortable handle.
- Brushing with excessive force or using a horizontal sawing motion causes cervical abrasion cavities and gingival recession.



- Instructional Steps:
- Apply a pea-sized amount of fluoridated toothpaste to the brush.
- Develop a systematic brushing routine, spending a minimum of covering all quadrants ( per quadrant).
- Focus bristles at a angle toward the gingival crevice, using short, gentle circular or sweeping strokes away from the gums.
- Tackle difficult areas first, such as the lingual surfaces of lower molars.
- Replace toothbrushes or electric brush heads every , or as soon as bristles become splayed.
- Instruct patients to spit out excess toothpaste after brushing but not rinse with water, allowing the topical fluoride layer to remain on the teeth.
Interdental Cleaning Techniques
- Toothbrush bristles cannot access interdental contact areas where mesial and distal surfaces touch.

- Interdental Aids:
- Dental Floss and Tape: Ideal for tight contact points. Floss is thin thread; tape is wider and flatter, making it gentler on gingivae.
- Flossettes: Handheld fork devices holding pre-tensioned floss, suitable for patients lacking manual dexterity.
- Interdental Brushes: Cylindrical or conical bottle-brush designs available in color-coded brush diameters. Highly effective for open interdental spaces and periodontally involved teeth.
- Water Irrigators (Waterpiks): Deliver pulsed water streams to flush food debris and unattached plaque from around teeth and fixed prostheses.


- Flossing Technique:
- Cut approximately of floss or tape.
- Wrap the ends around the middle or index fingers of both hands, leaving a working segment supported by the thumbs and index fingers.
- Gently slide the floss through the contact point using a back-and-forth sawing motion to avoid snapping it onto the interdental papilla.
- Curve the floss into a C-shape against the proximal surface of one tooth and slide it subgingivally into the crevice, wiping vertically up and down.
- Repeat on the adjacent proximal tooth surface before removing.

- Interdental Brushing Technique:
- Select the appropriate color-coded size so the bristles fill the interdental space without the central wire scrubbing against tooth structure.
- Angle or curve the brush head as necessary to access posterior teeth.
- Apply a small smear of fluoridated toothpaste to the brush bristles.
- Insert horizontally into the interdental space and move in a smooth in-and-out motion. Rinse the brush head between individual contact points.



Dietary Advice for Caries and Erosion Prevention
- Dietary advice focuses on reducing the frequency and amount of free sugars (added sugars, fruit juices, honey, syrups) and dietary acids.
- Each sugar intake causes an acid attack lasting as oral bacteria metabolize carbohydrates into organic acids, dropping plaque pH below the critical threshold ( for enamel, for dentine).

- Hidden Sugars in Foods:
- Tomato-based cooking sauces, ketchup, mayonnaise, and salad dressings.
- Flavoured crisps (e.g., prawn cocktail, smokey bacon).
- Canned fruits in syrup, canned baked beans, and sweetcorn.
- Flavoured breakfast cereals, breakfast bars, and dried fruits (raisins, dates).
- Low-fat processed foods (sugar added to enhance palatability), packet soups, and ready meals.
- Damaging Snacks (Avoid Between Meals):
- Confectionery, sweets, cakes, biscuits, and pastries.
- Carbonated soft drinks, including "zero sugar" or "diet" varieties (acidic carbonation causes erosion).
- Pure citrus fruit juices, smoothies, sweetened teas, and coffees.
- Safe Snacks (Recommended Between Meals):
- Water, milk (skimmed or semi-skimmed).
- Tea or coffee sweetened with non-cariogenic artificial sweeteners.
- Raw fibrous vegetables (carrots, celery) and non-citrus fruits (apples, pears).
- Plain unflavoured crisps (ready salted), low-fat cheeses, and unsweetened plain yoghurt.
Scaling and Polishing Procedures
- Disease Progression:
- Plaque accumulates at the gingival margin, causing reversible inflammation (gingivitis).
- Unremoved plaque calcifies via calcium and phosphate ions in saliva to form hard calculus (tartar).
- Calculus cannot be removed by brushing. Supragingival calculus sits above the margin; subgingival calculus forms inside periodontal pockets below the margin.
- Untreated subgingival plaque and calculus destroy periodontal ligament attachments and alveolar bone, progressing to irreversible periodontitis.

Simple Scaling (Supragingival)
- Instruments Used:
- Sickle Scalers: Triangular cross-section with sharp tip and two cutting edges, used for supragingival deposits.
- Jaquette Scalers: Straight-shranked scalers designed for anterior and premolar supragingival scaling.
- Push Scalers: Chisel-shaped tip pushed horizontally through anterior interdental spaces to dislodge bridge-like calculus calculus blocks.
- Ultrasonic Scalers: Magnetostrictive or piezoelectric handpieces vibrating at . Water irrigation cools the tip and flushes away debris via cavitation.



- Clinical Technique:
- Clinician and patient don PPE (operator wears gloves, mask, visor; patient wears safety eyewear and waterproof bib).
- Local anaesthetic is administered if tissue sensitivity is present.
- High-volume aspiration is used by the dental nurse to control water spray and debris.
- Hand scalers are hooked under the apical margin of supragingival calculus deposits and pulled coronally with firm pressure to shear the calculus off the enamel in large pieces.
- Scaling continues until enamel surfaces feel smooth upon probing.

Deep Scaling and Root Surface Debridement (Subgingival)
- Removal of subgingival calculus, bacterial biofilm, and endotoxin-contaminated cementum from root surfaces within subgingival pockets.
- Instruments Used:
- Universal and Gracey Curettes: Fine, rounded-toe hand instruments designed to slip beneath the gingival margin without lacerating pocket walls.
- Specialised thin subgingival ultrasonic tips.

- Clinical Technique:
- Administer local anaesthetic (topical gel followed by infiltration or nerve block injection).
- The curette blade is inserted into the pocket at a angle to the root surface, positioned apical to the subgingival calculus, angled to , and pulled coronally using short, powerful overlapping strokes.
- Debridement flushes contaminated cementum and smooths root surfaces.
- Pockets may be irrigated with antiseptic agents such as chlorhexidine gluconate.
Periodontal Adjuncts
- Antimicrobial or antibiotic agents placed directly into debrided periodontal pockets exceeding depth to eliminate residual pathogenic bacteria.
- Types of Adjuncts:
- Antimicrobial Gels: Subgingival gels containing chlorhexidine or metronidazole.
- Slow-Release Chips:
PerioChip(a biodegradable gelatin matrix containing chlorhexidine digluconate). Inserted into the pocket using college tweezers; absorbs over time while releasing chlorhexidine continuously for up to . - Antibiotic Gels:
Dentomycin( minocycline gel) delivered directly via a blunt-cannula syringe.

Polishing and Air Abrasion
- Polishing: Uses rubber cups or bristle brushes mounted in a slow-speed handpiece with abrasive prophylaxis paste to remove extrinsic pellicle stains (tea, coffee, wine).
- Air Abrasion: Uses a specialized handpiece attachment delivering a pressurized jet of air, water, and micro-fine sodium bicarbonate or glycine powder. Effective for removing heavy tobacco tar stains. Soft tissues are coated with petroleum jelly prior to air abrasion to prevent tissue sting from powder overspray.

Diagnostic Techniques in Dentistry
- Diagnosis involves comprehensive evaluation combining visual inspection, tactile probing, radiographic imaging, and study model analysis.
Visual Examination Skills
- Visual assessment begins when the patient enters the surgery (gait, posture, apprehension, systemic wellness).
- Extra-Oral Inspection: Facial symmetry, temporomandibular joint (TMJ) movement, lymph nodes, lip lesions (e.g., herpes labialis / cold sores).
- Intra-Oral Soft Tissue Screening:
- Systematic inspection of buccal mucosa, hard/soft palate, tongue, floor of mouth, and tonsillar pillars.
- Cheek Ridge (Lineed Alba): White hyperkeratotic line along the occlusal plane indicating clenching, grinding, or cheek biting.
- Aphthous Ulcer: Recurrent small oval mucosal ulceration with a red halo, often associated with stress or nutritional deficiencies.
- Tongue Border Lesion: Erythematous or leukoplakic mucosal changes requiring urgent referral to rule out oral squamous cell carcinoma.
- Stomatitis Nicotina: Palatal mucosal inflammation featuring red punctate dots (inflamed minor salivary gland duct openings) on a white palatal background in chronic smokers.
- Tonsilloliths: White calcified concretions within crypts of swollen tonsils.



- Tooth Surface Loss Evaluation:
- Abrasion: Physical wear of tooth structure by mechanical friction (e.g., horizontal toothbrushing creating sharp V-shaped cervical notches).
- Attrition: Mechanical wear resulting from tooth-to-tooth contact (e.g., bruxism causing flattened incisal edges, loss of molar cusp tips, and vertical enamel cracks).
- Erosion: Chemical dissolution of tooth tissue by non-bacterial acids. Extrinsic sources: acidic carbonated beverages, citrus juices, wine. Intrinsic sources: gastroesophageal reflux disease (GERD), bulimia nervosa. Results in smooth, cupped dentinal lesions on occlusal cusps and palatal surfaces, with restorations standing proud above adjacent dissolved enamel.



Diagnostic Hand Instruments
- Caries Probes:
- Right-Angle Probe / Sickle Probe: Sharp-pointed tips run gently across enamel pits, fissures, and margin borders. Soft, sticky resistance ("catch") indicates carious demineralisation; hard, scratchy feedback indicates sound enamel.
- Briault Probe: Double-ended probe with angled sharp tips designed to detect interproximal carious lesions and restoration overhangs.
- Periodontal Probes:
- Basic Periodontal Examination (BPE) Probe: Features a spherical ball tip and a black band marked between and . Used to screen pocket depths and detect subgingival calculus without puncturing the junctional epithelium.
- Healthy gingival sulcus depth is and does not bleed upon gentle probing.


Dental Radiography
- Intra-Oral Views:
- Bitewing Radiographs: Shows crowns of upper and lower premolars and molars on one film. Primary view for detecting interproximal caries and measuring alveolar crestal bone heights.
- Periapical Radiographs: Shows the entire tooth crown, root, and surrounding periapical bone ( beyond the apex). Detects periapical abscesses, root fractures, and root canal anatomy.
- Occlusal Radiographs: Captures larger segments of the anterior maxilla or mandible.
- Film Holders: Paralleling film holders with beam-aiming rings align the film parallel to the tooth's long axis and position the X-ray tubehead perpendicular, preventing geometric distortion.


- Extra-Oral Views:
- Dental Pantomograph (DPT / OPG): Panoramic image showing the complete maxilla, mandible, dentition, TMJs, and maxillary sinuses.
- Lateral Skull (Cephalometric) Radiograph: Standardised side-profile view of the skull and jaws used in orthodontics to analyze skeletal relationships.
- Cone-Beam Computerised Tomography (CBCT): Generates 3D volumetric images of jawbones. Essential for implant treatment planning (measuring bone height, width, and density) and assessing nerve proximity.

Diagnostic Study Models
- Three-dimensional plaster or stone casts of the dental arches.
- Indications: Orthodontic planning, extensive crown/bridge design, implant placement, full-mouth rehabilitation, monitoring tooth wear, and partial denture design.
- Technique: Take primary impressions using alginate in perforated stock trays; record occlusion using a wax bite wafer; pour impressions in dental stone within . Casts may be mounted on an articulator to replicate jaw movements.

Tooth Restoration with Fillings
- Caries causes enamel demineralisation, exposing underlying dentine tubules containing odontoblastic nerve processes, causing sensitivity to thermal stimuli and sweet foods. Unchecked caries reaches the pulp chamber, causing irreversible pulpitis, pulpal necrosis, and periapical abscess formation.
Amalgam Restorations
- Composition and Properties:
- Produced by triturating silver-tin alloy powder with liquid mercury.
- Forms a malleable metallic mass that hardens into a strong, wear-resistant plug.
- Silver appearance limits its use to posterior teeth.
- Environmental and Clinical Regulations: The Minamata Convention led to phased reductions in mercury usage; amalgam use in children under and pregnant/breastfeeding women is restricted in the UK.

- Clinical Procedure:
- Administer local anaesthetic; place moisture control (suction, cotton rolls).
- Remove infected dentine using high-speed diamond burs and low-speed steel rosehead burs or hand excavators.
- Create undercut cavity features (box forms, mechanical locks) because amalgam does not adhere chemically to tooth structure.
- In deep cavities, apply a thin layer of protective lining (calcium hydroxide or GIC) to insulate the pulp thermally.
- Place a stainless steel matrix band held by a matrix retainer (Tofflemire or Siqveland) and wooden wedge around multi-surface cavities to prevent interproximal overhangs.
- Triturate amalgam capsule, transfer amalgam in increments using an amalgam carrier, and condense firmly into all cavity angles using an amalgam condenser to eliminate voids.
- Carve occlusal cusps and marginal ridges with carving instruments; check bite with articulating paper; instruct patient not to chew on the fresh amalgam for until full compressive strength develops.
Composite Restorations
- Composition and Properties:
- Tooth-coloured resin composed of a methacrylate resin matrix (BIS-GMA or UDMA) reinforced with inorganic glass/silica filler particles.
- Available in various shades; universal composite materials adapt their shade to match surrounding enamel upon light curing.
- Requires absolute moisture control (saliva or blood contamination destroys resin bonding).


- Clinical Procedure:
- Select tooth shade using a shade guide under natural light.
- Isolate tooth with rubber dam (rubber sheet punched and secured around tooth with metal clamp and frame).
- Prepare cavity minimally (composite micro-mechanically bonds to etched enamel/dentine; undercuts are unnecessary).
- Apply phosphoric acid etch to enamel () and dentine (); wash thoroughly and air-dry gently.
- Apply liquid bonding agent (resin) with a micro-brush, air-thin, and cure with a blue LED curing lamp ().
- Place clear acetate matrix strip and wooden wedge for Class II/III/IV cavities.
- Place composite resin in incremental layers no thicker than to ensure complete light penetration and minimize polymerization shrinkage; cure each increment separately.
- Bulk-fill flowable composites may be used for deep bases before topping with conventional composite.
- Shape occlusal anatomy; adjust high spots using articulating paper; finish and polish using fine diamond burs, flexible abrasive discs, and polishing strips.


Glass Ionomer Cements (GIC)
- Properties:
- Self-adhesive tooth-coloured material consisting of fluoroaluminosilicate glass powder and polyacrylic acid liquid.
- Forms direct chemical bonds to enamel, dentine, and cementum via chelation of carboxyl groups to calcium ions.
- Releases fluoride continuously over time, acting as a fluoride reservoir to prevent secondary caries.
- Less translucent and lower compressive strength than composite; ideal for non-stress-bearing cervical cavities (Class V abrasion/erosion/root caries) and deciduous teeth.

- Clinical Procedure:
- Remove soft carious dentine.
- Apply polyacrylic acid cavity conditioner () to remove the smear layer; wash and dry.
- Mix GIC powder and liquid on a pad or mix encapsulated GIC in an amalgamator; insert into cavity.
- Adapt material into place; allow chemical setting () or light-cure if resin-modified GIC (RMGIC) is used.
- Coat fresh GIC immediately with a light-cured waterproof resin varnish to protect it from moisture uptake or desiccation during initial setting.
Fixed Restorative Dentistry: Crowns, Bridges, Veneers, and Inlays
Crowns
- Indications: Extensively broken down teeth, root-filled teeth vulnerable to fracture, severely discoloured or malformed teeth, or bridge abutments.
- Materials: Full gold alloy/non-precious metal, Porcelain-Fused-to-Metal (PFM), All-Ceramic (lithium disilicate, zirconia).

- Preparation and Fitting Technique:
- Administer local anaesthetic; select tooth shade.
- Reduce occlusal/incisal surfaces () and circumferential axial walls () using high-speed diamond burs to create a tapered core preparation with a defined chamfer or shoulder margin.
- Take an accurate elastomeric working impression (addition-cure silicone or polyether) of the prepared tooth, an alginate impression of the opposing arch, and an occlusal bite registration.
- Alternatively, scan the preparation digitally using an intraoral 3D optical scanner.
- Fabricate and cement a temporary crown using temporary cement to insulate dentine and maintain space.
- At the second visit, remove the temporary crown, clean the preparation core, try in the permanent crown, and verify margin adaptation, contact points, and occlusion.
- Cement permanently using a luting cement (glass ionomer, zinc phosphate, or dual-cure resin cement).

Bridges
- Purpose: Fixed prosthetic appliance replacing one or more missing teeth (pontics) anchored to adjacent natural teeth (abutments).
- Types:
- Conventional Bridge: Abutment teeth are prepared for full coverage crowns linked to the pontic.
- Resin-Bonded / Maryland Bridge: Pontic is attached to thin metal or ceramic wings bonded via acid-etch technique to the lingual/palatal enamel of adjacent abutment teeth. Requires minimal tooth preparation.
- Hygiene Maintenance: Patients must clean beneath the pontic daily using Superfloss (featuring a stiffened end threader and spongy central floss) or interdental brushes to prevent tissue inflammation.
Veneers
- Purpose: Thin aesthetic facings (porcelain or composite) bonded to the labial surfaces of anterior teeth to correct discolouration, minor misalignment, or incisal chipping.
- Technique:
- Minimal preparation: Remove of labial enamel within the enamel layer under local anaesthetic.
- Take an elastomeric impression.
- Try in the porcelain veneer; etch the inner porcelain surface with hydrofluoric acid and silanate it.
- Etch the tooth enamel, apply resin bonding agent, and cement the veneer using light-cured resin cement.
- Contraindicated in severe bruxism or direct edge-to-edge bites.

Inlays and Onlays
- Purpose: Indirect restorations fabricated in a laboratory or via CAD/CAM milling for large posterior cavities.
- Inlay: Restores cavity within the cusps.
- Onlay: Covers and protects one or more compromised cusps subject to heavy occlusal forces.
- Materials: Gold alloy, ceramic, composite resin.
- Technique: Prepare cavity with parallel or slightly divergent vertical walls (no undercuts); eliminate undercuts with a GIC base; take impression or 3D scan; place temporary inlay; cement final restoration at the second visit with luting cement.

Endodontic Procedures and Root Restoration
Pulp Capping
- Preserves pulpal vitality when pulp tissue is near exposure or minimally exposed.
- Indirect Pulp Capping: Indicated for deep caries near the pulp without pulpal exposure. Caries is excavated leaving a thin layer of affected dentine over the pulp floor; a layer of bioactive calcium silicate cement (
Biodentine,MTA) is placed to stimulate tertiary dentine formation before final restoration. - Direct Pulp Capping: Indicated for small, pinpoint mechanical or traumatic exposures () in a vital, non-infected pulp.
- Technique: Isolate tooth; control exposure bleeding within using a sterile cotton wool pledget soaked in local anaesthetic with adrenaline or sodium hypochlorite; cover exposure site directly with bioactive calcium silicate cement; seal with GIC lining and place permanent restoration.

Pulpotomy
- Surgical removal of the inflamed coronal pulp tissue while leaving the healthy radicular pulp intact.
- Immature Permanent Teeth (Apexogenesis): Performed when an open root apex is present. Removing coronal pulp and placing calcium silicate cement over radicular stumps keeps the root pulp vital, allowing root growth and apical closure to complete.
- Mature Permanent Teeth: Coronal pulp is amputated to root canal entrances using a sharp bur under copious water spray. Bleeding is arrested using sodium hypochlorite-soaked pledgets within . Calcium silicate cement is placed directly over pulp stumps, followed by coronal restoration.
Pulpectomy (Root Canal Treatment)
- Complete extirpation of all pulpal tissue (coronal and radicular) from the root canal system, followed by shaping, disinfection, and three-dimensional obturation.
- Indications: Irreversible pulpitis, pulpal necrosis, periapical abscess (acute or chronic).


- Clinical Technique:
- Administer local anaesthetic; isolate tooth strictly with a rubber dam.
- Drill endodontic access cavity into the pulp chamber using high-speed burs.
- Remove soft pulp tissue from root canals using barbed broaches.
- Irrigate root canals continuously with sodium hypochlorite () solution to dissolve organic debris and destroy bacteria.
- Shape and enlarge root canals to the apex using hand or rotary endodontic files (NiTi files) while maintaining irrigation.
- Determine working length accurately using an electronic apex locator or periapical radiograph.
- Dry shaped canals thoroughly using sterile absorbent paper points.
- Obturate canals by placing a primary gutta-percha point matched to the working length, coated with endodontic root canal sealer, and condensing laterally with accessory gutta-percha points using a finger spreader, or by injecting warm thermoplasticized gutta-percha.
- Seal access cavity; restore tooth with a composite core, post and core (if crown structure is destroyed), or full coverage crown to prevent vertical root fracture.
Apicectomy (Periapical Surgery)
- Surgical excision of the root apex and surrounding infected periapical tissue, followed by placement of a retrograde root filling.
- Indications: Persistent periapical periodontitis/abscess following failed root canal treatment where the canal cannot be accessed conventionally (e.g., presence of an irretrievable post).

- Clinical Technique:
- Administer local anaesthetic; raise a full-thickness mucoperiosteal flap with a scalpel and periosteal elevator; retract flap.
- Remove cortical bone over the root apex using a surgical bur under saline irrigation.
- Curette all infected periapical granulation tissue.
- Resect the apical of the root tip at a angle to the root long axis.
- Prepare a deep class I cavity into the cut root end using a specialized ultrasonic surgical tip.
- Place a retrograde filling material (MTA or calcium silicate cement) into the root-end cavity to seal the root canal apically.
- Irrigate bone cavity with sterile saline; reposition mucoperiosteal flap; suture with black braided silk or resorbable sutures.
- Remove non-resorbable sutures after .
Tooth Extraction Procedures and Post-Operative Management
Simple Extractions
- Removal of a tooth or root fragment using luxators, elevators, and extraction forceps without incising soft tissues or removing bone.
- Instruments Used:
- Luxators: Tapered wedge instruments inserted into the periodontal ligament space to cut ligament fibers and expand bone.
- Elevators (Coupland, Cryer, Warwick James): Inserted interdentally to leverage and rotate root structures out of sockets.
- Extraction Forceps: Anatomically contoured beaks designed to grip root surfaces (Upper anterior/premolar forceps, Upper molar left/right forceps with point engaging buccal furcation, Lower universal/molar forceps).


- Clinical Technique:
- Confirm tooth identity and review current radiograph.
- Administer local anaesthetic.
- Sever gingival attachment; insert luxator/elevator into PDL space to loosen tooth.
- Apply forceps beaks to root surface parallel to long axis; apply apical, labial/buccal, and palatal/lingual pressure to expand socket walls; deliver tooth.
- Inspect extracted tooth to ensure root tips are intact.
- Compress expanded alveolar socket walls; place sterile cotton gauze pack over socket; instruct patient to bite firmly for to establish a stable blood clot.

Surgical Extractions
- Required for impacted teeth (e.g., lower wisdom teeth), severely curved roots, ankylosed roots, or teeth with roots that fracture at or below the alveolar bone margin during simple extraction.

- Clinical Technique:
- Administer local anaesthetic.
- Incise and raise a mucoperiosteal flap using a scalpel and periosteal elevator; retract soft tissues.
- Remove covering buccal bone using a surgical bur in a handpiece under continuous sterile saline irrigation.
- Section multi-rooted teeth into single root components (hemisection or trisection).
- Elevate and remove root sections independently using elevators.
- Smooth rough bone edges; debride socket; insert resorbable gelatin sponge if required; suture flap back into position.
Post-Extraction Patient Instructions
- Do not rinse, spit, drink hot liquids, consume alcohol, perform strenuous exercise, or smoke for to avoid dislodging the primary blood clot (preventing alveolar osteitis / "dry socket").
- Eat soft, lukewarm foods away from the extraction site once local anaesthetic wears off.
- Starting post-extraction, gently rinse with warm salt water ( salt in a glass of warm water) 3–4 times daily after meals for .
- Take non-aspirin analgesics (paracetamol or ibuprofen) for pain relief; avoid aspirin as it inhibits platelet aggregation and promotes bleeding.
- In case of secondary bleeding: place a folded clean damp cotton cloth or gauze over the socket and bite firmly for .
Removable Prosthodontics: Dentures
- Removable prostheses replacing missing teeth and lost alveolar tissue.
- Full Dentures: Replace all teeth in an edentulous arch. Retained by mucostatic film adhesion, atmospheric seal, and neuromuscular control.
- Partial Dentures: Replace several missing teeth in a partially dentate arch. Retained by direct metal clasps resting on undercut natural abutment teeth.
Types of Dentures
- Acrylic Dentures: Pink polymethyl methacrylate (PMMA) resin base. Inexpensive, easily modified, relined, or repaired, but bulkier and prone to fracture.
- Chrome-Cobalt Dentures: Rigid, thin cast-metal framework with acrylic saddles holding teeth. Hygenic, open-margin design that does not cover gingival tissue unnecessarily.
- Thermoplastic Acrylic Dentures: Flexible resin base that softens when placed in warm water before insertion, adapting comfortably around natural bony undercuts without metal clasps.
- Immediate Replacement Dentures: Fabricated prior to extractions and inserted immediately after extracting teeth. Maintains aesthetics and phonetics. Requires relining or remaking within due to post-extraction alveolar bone resorption.
Construction Workflow (5 Appointments)
- Appointment 1 (Primary Impressions): Take alginate impressions in stock trays to produce study models; laboratory constructs custom special trays and wax bite rims.
- Appointment 2 (Secondary Impressions & Bite Registration): Take accurate secondary impressions using special trays with elastomeric materials. Record occlusal vertical dimension (OVD) and centric relation using wax bite rims. Select tooth shade and mold.

- Appointment 3 (Metal Framework Try-in for Chrome Dentures): Try in the cast chrome framework to verify fit and clasp retention.
- Appointment 4 (Wax Try-in): Try in the denture teeth set in wax. Evaluate aesthetics, lip support, center line, shade, phonetics, and occlusion. Adjust wax setup as needed.

- Appointment 5 (Fitting & Delivery): Inspect fitting surface for sharp spurs. Insert processed PMMA denture. Check occlusion with articulating paper and adjust high spots using acrylic burs. Provide hygiene instructions.

Denture Hygiene and Care
- Clean dentures twice daily over a bowl filled with water or a folded towel to prevent breakage if dropped.
- Brush all surfaces with a dedicated denture brush and mild soap or non-abrasive denture paste.
- Remove dentures overnight to allow oral mucosa to rest, preventing denture stomatitis (Candida albicans fungal infection).
- Store clean dentures overnight in cold water. Do not use bleach-based cleaners on metal chrome dentures to prevent corrosion.
Dental Implantology
- Implants are threaded titanium cylinder fixtures surgically placed into jawbone to replace missing root structures, supporting crowns, bridges, or overdentures.
Pre-Surgical Assessment
- Comprehensive clinical evaluation, periodontal screening, and 3D CBCT imaging to evaluate bone height, width, density, and proximity to anatomical structures (inferior alveolar nerve, mental foramen, maxillary sinus).
- Inadequate bone volume requires bone grafting or sinus lift procedures prior to or during implant placement.
- Contraindicated in uncontrolled diabetes, active periodontitis, heavy smoking, or history of IV bisphosphonate therapy.
Surgical Placement Protocol
- Performed under strict surgical sterile conditions (sterile gowns, surgical drapes, sterile gloves).
- Administer local anaesthetic; incise and reflect a full-thickness mucoperiosteal flap.
- Flatten alveolar crest; create osteotomy site using sequential calibrated twist drills under continuous irrigation with sterile saline delivered via an implant motor unit.



- Drive the threaded titanium implant fixture into the prepared osteotomy site to the correct depth and insertion torque.
- Place a cover screw or healing collar; suture mucoperiosteal flap over or around the fixture.
- Healing Phase (Osseointegration): Unloaded healing for allows direct structural bone bonding to the titanium surface.
Restorative Phase
- Uncover implant (if cover screw used); attach a titanium abutment into the internal fixture thread.
- Take an elastomeric transfer impression of the abutment.
- Laboratory fabricates custom porcelain-fused-to-metal or all-ceramic crown/bridge.
- Screw or cement the crown onto the abutment.
- Peri-Implantitis: Bacterial inflammation affecting tissue and bone around implants. Requires strict oral hygiene using interdental brushes and Superfloss to prevent implant loss.


Treatment Under Conscious Sedation
- Conscious sedation uses pharmacological agents to produce a state of depression of the central nervous system, enabling treatment while maintaining verbal contact, consciousness, and intact protective airway reflexes (coughing, swallowing).
Inhalation Sedation (Nitrous Oxide / Oxygen)
- Administration of a controlled mixture of Nitrous Oxide () and Oxygen () inhaled through a dedicated nasal hood.
- Suitable for both children and adult anxious patients.
- Gas Safety Features:
- Nitrous oxide cylinders and tubing are coloured BLUE.
- Oxygen cylinders are coloured BLACK with WHITE shoulders, and tubing is WHITE.
- Non-interchangeable pin-index safety systems prevent misconnection of gas lines.
- Delivery units feature a safety cut-off limiting maximum flow to (minimum flow mandatory).
- Emergency Oxygen Flush button delivers instantly.
- Active scavenging system forcibly removes exhaled waste from the surgery room air.


- Clinical Technique:
- Fit nasal hood; start for .
- Introduce at concentration, titrating upwards in increments every until the patient feels relaxed, tingling in extremities, and light-headedness.
- Administer local anaesthetic and perform dental treatment.
- At completion, turn off completely and administer for a minimum of to flush from lungs, preventing diffusion hypoxia.
- Patient recovers within and can be discharged without a prolonged stay.
Intravenous Sedation (Single-Drug Titration)
- Administration of a short-acting benzodiazepine (Midazolam) intravenously via a peripheral cannula.
- Indicated for moderate to severe adult dental anxiety, complex surgical extractions, or long procedures. Produces deep sedation and anterograde amnesia.

- Required Equipment:
- Venepuncture kit (tourniquet, alcohol wipe,
Venfloncannula, micropore tape). - Syringe containing Midazolam ( solution).
- Multifunctional Pulse Oximeter (monitors continuous arterial oxygen saturation , pulse rate, and blood pressure).
- Emergency reversal agent (Flumazenil ) and emergency airway equipment (
I-gelsupraglottic airway, AED, oxygen).
- Venepuncture kit (tourniquet, alcohol wipe,

- Clinical Technique:
- Measure and record baseline vital signs (, pulse, blood pressure).
- Perform venepuncture (dorsum of hand, wrist, or antecubital fossa); secure cannula.
- Titrate Midazolam slowly (); assess patient response after each increment until endpoint is reached (slurred speech, relaxed posture, Eve's sign / half-drooping eyelids).
- Insert mouth prop; administer local anaesthetic; perform dental treatment.
- Continuously monitor and record vital signs every .
- Recovery & Discharge: Patient recovers in surgery/recovery area; cannula is removed once fully ambulatory; discharged into the care of a responsible adult escort.
- Post-IV Sedation Escort Rules: Patient must not drive, operate machinery, drink alcohol, or sign legal documents for .
Orthodontic Appliances and Tooth Alignment
- Orthodontics corrects malocclusion, tooth crowding, spacing, and proclination, improving function, aesthetics, and oral hygiene accessibility.
Removable Appliances
- Acrylic baseplate held by stainless steel retention clasps (Adams cribs, Southend clasps) and active components (finger springs, Z-springs, mid-palatal expansion screws).
- Used for simple tipping tooth movements in growing patients.
- Cleaned with toothbrush and toothpaste over a bowl of water; removed during contact sports and meals.

Conventional Fixed Appliances
- Provides precise three-dimensional tooth control (bodily movement, rotation, torque).
- Components: Metal/ceramic brackets bonded to labial enamel, molar bands/tubes, arch wires (Nickel-Titanium / NiTi for initial alignment, Stainless Steel for final detailing), elastomeric modules (alastiks) or ligature wires.


- Clinical Bonding Procedure:
- Isolate arch; polish labial enamel with pumice; apply acid etch (); wash and dry.
- Apply bonding resin to etched enamel and bracket base; position brackets accurately on long axis using bracket holders; light-cure.
- Cement molar bands using GIC.
- Thread flexible initial NiTi arch wire into bracket slots; secure with elastomeric modules.
- In the UK, fixed orthodontic patients undergo topical fluoride varnish application every due to high caries risk.
Short-Term Cosmetic Fixed Appliances ("Six Month Smiles")
- Target adult patients focusing exclusively on aligning anterior teeth for cosmetic improvement ( duration, average ) without altering posterior occlusion.
- Uses tooth-coloured aesthetic brackets and white-coated arch wires.
- Uses indirect bonding trays fabricated on lab models.
- Interproximal reduction (IPR / enamel stripping) creates needed space between crowded teeth using slender abrasive strips.

Clear Aligners ("Invisalign")
- Series of custom-manufactured, transparent plastic aligner trays generated via 3D optical CAD/CAM scanning.
- Worn sequentially for each, for a minimum of , removed only for eating, drinking, and brushing.
- Retention: All orthodontic treatments require long-term retention (fixed bonded wire retainers and/or clear vacuum-formed retainers worn overnight for life) to prevent relapse.

Tooth Whitening Techniques
- Whitening agents (Hydrogen Peroxide or Carbamide Peroxide) break down intrinsic chromogenic double-bond stains within enamel and dentine via oxidation.
Simple Home Tray Whitening
- Uses custom vacuum-formed EVA trays with labial wells holding gel.
- Patient applies Carbamide Peroxide () or Hydrogen Peroxide () gel into trays daily for or overnight over several weeks.
- Safe and effective; does not alter shade of existing restorations (crowns/fillings).

Enhanced Home Tray Whitening
- Uses a structured 3-week home gel protocol combined with pre-treatment desensitising serum worn for prior.
- Week 1: gel overnight.
- Week 2: gel overnight.
- Week 3: gel for .
- Post-treatment whitening toothpaste maintains brightness.
In-House Power Whitening
- Chairside application of high-concentration Hydrogen Peroxide gel activated by an intense power light source.



- Clinical Technique:
- Record pre-treatment shade; apply lip soothing balm.
- Insert lip/cheek retractor and pack gauze around soft tissues.
- Apply light-cured barrier resin ("liquid dam") over all marginal gingivae and light-cure to prevent chemical chemical burns.
- Apply gel activator and whitening gel to anterior teeth.
- Expose to power light for four cycles, suctioning and reapplying fresh gel between cycles.
- Instruct patient to avoid dark staining foods/drinks (coffee, red wine, soy sauce) and smoking for while enamel tubular pores close.
Extended Duties of the Dental Nurse
- In the United Kingdom, registered dental nurses can extend their scope of practice by undergoing workplace ("in-house") training or accredited post-registration courses.
Basic versus Extended Duties Overview
- Basic Duties: Surgery set-up/close-down, infection prevention and decontamination, dental charting, biomaterial mixing, chairside aspiration/support, radiograph processing, basic life support (BLS).
- Autonomous Extended Duties: Oral health education/promotion, assisting in conscious sedation, intra/extra-oral photography, shade taking, model pouring/casting/trimming, cephalometric tracing.
- Extended Duties Under Prescription/Delegation: Pressing X-ray exposure button, placing rubber dam, measuring plaque indices, suture removal, applying topical anaesthetic, alginate impression taking, constructing bleaching trays/mouthguards, fluoride varnish application.
Oral Health Education & Diet Analysis
- Perform one-to-one patient instruction using "Tell, Show, Do" techniques.
- Diet Sheet Evaluation:
- Analyze patient diet logs across periods.
- Identify frequency of free sugar hits, hidden sugars, acidic beverages, and map them against toothbrushing times.
- Formulate realistic behavioral goals (e.g., swapping carbonated drinks for water/milk, confining sugar to mealtimes, spit-don't-rinse habit).
Fluoride Varnish Application (Under Prescription)
- Apply Sodium Fluoride varnish () to prescribed high-risk patients.
- Procedure: Dry teeth using cotton wool rolls/air; apply single-dose varnish () to pits, fissures, and interproximal areas using a micro-brush, avoiding soft tissue contact; allow saliva to set varnish.
- Post-App Instructions: No eating, drinking, or brushing for ; soft diet for rest of day; no alcohol or fluoride mouthwashes that day.
- Contraindications: Ulcerative gingivitis, stomatitis, severe asthma/allergies requiring hospitalization, children under of age.
Orthodontic Extended Duties
- Lay out specialized instruments: Adams pliers, bracket holders, elastic holders, wire cutters, bracket removers, band removers.

- Set up bracket orientation cards arranging brackets by tooth position (identifying disto-gingival dots, canine hooks, molar tubes).
- Instruct patients on brace care and specialized interdental cleaning under arch wires.
Plaque Index Measurement
- Method 1 (Full Mouth Percentage): Examine 6 sites per tooth (buccal & lingual mesial, mid, distal). Total sites with plaque divided by total sites present multiplied by 100 = Plaque Index .
- Method 2 (Ramfjord Index Sample): Score 6 teeth (UR6, UR2, UL4, LL6, LL2, LR4) on 4 sites each (, , , ). Average score calculated ( scale).

Cephalometric Radiograph Tracing
- Overlay lateral skull radiograph with acetate tracing sheet on viewbox.
- Trace anatomical structures: Nasion (N), Sella turcica (S), Point A (maxillary dentoalveolar deep point), Point B (mandibular dentoalveolar deep point), Maxillary plane, Mandibular plane.
- Measure angular relationships (SNA, SNB, ANB, M/M angle) for clinician analysis.
Impression Taking (Alginate)
- Select correctly sized perforated stock tray (must cover arch without catching teeth).
- Mix alginate using 1:1 powder:water ratio to smooth consistency.
- Load upper tray from posterior to anterior; load lower tray in two halves.
- Insert lower tray standing in front with swing motion; ask patient to lift tongue.
- Insert upper tray standing behind; press posterior to anterior.
- Hold firmly until set; break air seal; remove with firm pull on handle.
- Disinfect ( immersion), wrap in damp gauze, place in sealed bag labelled disinfected.

Model Pouring, Casting, and Trimming
- Mix dental stone powder with water to slurry consistency ( water); vibrate to eliminate air bubbles.
- Pour stone into impression starting at one distal molar heel, flowing around the arch.
- Add stiffer stone base; allow exothermic setting ().
- Remove tray first, then peel alginate off model.
- Trim bases on model trimmer or mount on pre-shaped plastic bases with alignment tags using wax bite registration.

Constructing Bleaching Trays
- Trim study model; apply block-out spacer wax ( thick) to labial surfaces of teeth to create gel wells.
- Place model in vacuum tray machine; load EVA sheet; heat until sheet sags .
- Lower heating frame over model; run vacuum suction for .
- Cool, remove, and trim tray along gingival margin in a scalloped pattern using curved scissors.

Intra- and Extra-Oral Photography
- Digital SLR camera fitted with macro lens and ring flash.
- Select mode dial (head icon for extra-oral portraits, flower/macro icon for intra-oral).
- Switch to Manual Focus (MF) for intra-oral close-ups when auto-focus catches lips.
- Use lip retractors and cold-water rinsed front-surface glass mirrors for upper arch / lingual views.

Pressing X-Ray Exposure Button
- Carried out under direct supervision of the qualified set-up operator.
- Stand outside the controlled area ( radius) and safety zone ( total distance).
- Press and hold exposure button continuously until the audible buzzer alarm terminates.
- Machine Malfunction Protocol: If buzzer continues sounding, release button, remain outside safety zone, isolate machine at wall isolator switch, mark machine out of use, notify Radiation Protection Advisor (RPA) and Medical Physics Expert (MPE).

Removing Sutures
- Confirm surgical site is fully healed and checked by clinician.
- Count sutures present and verify against placement records.
- Hold suture knot taut with college tweezers; insert half-moon cut-out blade of suture scissors under loop close to tissue; cut loop; gently pull suture out.
- Recount removed sutures and verify complete removal.
- Advise warm salt water mouthwashes for several days post-removal.