Grade 11 Mechanics Study Notes

Vectors in One and Two Dimensions

  • Vectors vs. Scalars:

    • Vector: Physical quantity possessing both magnitude and direction (e.g., force, weight, velocity, displacement, acceleration).

    • Scalar: Physical quantity possessing magnitude only (e.g., time, mass, speed, distance, energy).

  • Vector Representation and Sign Conventions:

    • Vectors are drawn as arrows where arrow length represents magnitude and the arrowhead specifies direction.

    • One-dimensional vectors assign positive (++) or negative (−-) signs to designate opposing directions (e.g., right vs. left, up vs. down).

    • Two-dimensional directions are described relative to coordinate axes (e.g., 30∘30^{\circ} above the horizontal), using compass points (e.g., 30∘30^{\circ} North of East), or by bearings measured clockwise from North (0∘0^{\circ}).

  • Resolution of Components:

    • Any vector R\mathbf{R} acting at an angle θ\theta to the horizontal can be broken into perpendicular components:

    • Horizontal component: Rx=Rcos⁡(θ)R_x = R\cos(\theta)

    • Vertical component: Ry=Rsin⁡(θ)R_y = R\sin(\theta)


Vector component resolution

Resultant Vectors and Equilibrium

  • Resultant Vector (RR): A single vector that produces the same effect as two or more vectors acting together.

    • Reaches maximum magnitude when vectors act in the same direction.

    • Reaches minimum magnitude when vectors act in opposite directions.

  • Resultant Calculations for Perpendicular Vectors:

    • Magnitude via the Theorem of Pythagoras:     R=Rx2+Ry2R = \sqrt{R_x^2 + R_y^2}

    • Direction angle θ\theta from the horizontal:     tan⁡(θ)=RyRx\tan(\theta) = \frac{R_y}{R_x}

  • Vector Addition Techniques:

    • Tail-to-Head Method: Place the tail of each successive vector at the head of the previous vector; the resultant connects the tail of the first vector to the head of the final vector.

    • Tail-to-Tail (Parallelogram) Method: Draw vectors from a common origin and complete the parallelogram; the diagonal from the origin represents the resultant.

  • Triangle Rule for Forces in Equilibrium:

    • When three coplanar forces acting at a point are in equilibrium (F1+F2+F3=0\mathbf{F}_1 + \mathbf{F}_2 + \mathbf{F}_3 = \mathbf{0}), they form a closed triangle when arranged head-to-tail, resulting in a net resultant of zero.

Types of Forces and Friction

  • Contact vs. Non-Contact Forces:

    • Contact Forces: Require physical contact (e.g., normal force, frictional force, tension, applied force).

    • Non-Contact Forces: Act over a distance (e.g., gravitational, electrostatic, magnetic forces).

  • Primary Mechanical Forces:

    • Normal Force (NN or FNF_N): Perpendicular force exerted by a surface on an object in contact with it.

    • Tension (TT or FTF_T): Pulling force transmitted through a string, rope, or cable.

    • Weight (ww or FgF_g): Gravitational attraction of Earth on an object (w=mgw = mg, where g=9.8 m⋅s−2g = 9.8\,m\cdot s^{-2}).

  • Friction Formulas and Properties:

    • Acts parallel to the contact surface and opposes relative motion or the tendency of motion.

    • Maximum static friction:     fs max=μsNf_{s\,\text{max}} = \mu_s N

    • Kinetic friction:     fk=μkNf_k = \mu_k N

    • Coefficients μs\mu_s and μk\mu_k are dimensionless; motion occurs when the applied force exceeds fs maxf_{s\,\text{max}}.

  • Effect of Angled Applied Forces on Flat Surfaces:

    • Pulling at angle θ\theta above horizontal: N=mg−FAsin⁡(θ)N = mg - F_A\sin(\theta); increasing θ\theta decreases normal force and reduces friction.

    • Pushing at angle θ\theta below horizontal: N=mg+FAsin⁡(θ)N = mg + F_A\sin(\theta); increasing θ\theta increases normal force and increases friction.

  • Inclined Planes:

    • Weight component parallel to the slope: Fg∥=mgsin⁡(θ)F_{g\parallel} = mg\sin(\theta)

    • Weight component perpendicular to the slope: Fg⊥=mgcos⁡(θ)F_{g\perp} = mg\cos(\theta)

    • Normal force on a slope (no other vertical forces): N=mgcos⁡(θ)N = mg\cos(\theta)


Resolving weight on an inclined plane

Newton's Laws of Motion

  • Newton's First Law of Motion:

    • A body remains in its state of rest or constant velocity in a straight line unless acted upon by a non-zero net force (Fnet=0  ⟹  a=0F_{\text{net}} = 0 \implies a = 0).

    • Inertia: The resistance of an object to changes in its state of motion, quantitatively measured by mass (mm).

  • Newton's Second Law of Motion:

    • When a net force acts on an object, the object accelerates in the direction of the net force; acceleration is directly proportional to the net force and inversely proportional to the mass:     Fnet=maF_{\text{net}} = ma

  • Newton's Third Law of Motion:

    • When object A exerts a force on object B, object B simultaneously exerts an oppositely directed force of equal magnitude on object A:     FA on B=−FB on A\mathbf{F}_{A\text{ on }B} = -\mathbf{F}_{B\text{ on }A}

    • Properties of Action-Reaction Pairs: Equal in magnitude, opposite in direction, act simultaneously, and act on different objects (meaning they never cancel each other out).

Newton's Law of Universal Gravitation

  • Universal Gravitation Equation:

    • Every particle in the universe attracts every other particle with a force directly proportional to the product of their masses and inversely proportional to the square of the distance between their centres:     F=Gm1m2r2F = G\frac{m_1 m_2}{r^2}

    • Gravitational constant: G=6.67×10−11 N⋅m2⋅kg−2G = 6.67 \times 10^{-11}\,N\cdot m^2\cdot kg^{-2}

  • Gravitational Acceleration (gg):

    • Acceleration due to gravity on the surface of a body of mass MM and radius rr:     g=GMr2g = \frac{GM}{r^2}

    • Earth values: MEarth=5.98×1024 kgM_{\text{Earth}} = 5.98 \times 10^{24}\,kg, rEarth=6.38×106 mr_{\text{Earth}} = 6.38 \times 10^{6}\,m, yielding g=9.8 m⋅s−2g = 9.8\,m\cdot s^{-2}.