Comprehensive Study Notes on Water in Food Science
Essential Properties and Molecular Structure of Water
General Definition: Water is a tasteless and odourless substance that is essential to all known forms of life. It is widely recognized as the universal solvent.
Visual Characteristics: Water appears colorless to the naked eye when viewed in small quantities.
Environmental Presence: It covers nearly of the Earth’s surface.
Molecular Composition ():
The molecule consists of two hydrogen () atoms bonded to one oxygen () atom.
Each hydrogen atom shares an electron pair with the oxygen atom through covalent bonding.
Dipole Nature and Charge Separation:
A charge separation, or dipole, occurs within the molecule where the oxygen atom displays a partial negative charge and the hydrogen atoms display partial positive charges.
The dipole nature directly affects physical characteristics including the boiling point, freezing point, and vapor pressure.
This dipole results in electrostatic attraction between adjacent molecules, known as hydrogen bonding.
Tetrahedral Arrangement: The orbitals around the oxygen atom are arranged tetrahedrally. This allows each water molecule to form hydrogen bonds with as many as four neighboring water molecules.
Water as a Solvent and Dispersion Agent
Solvation (Dissolution): This is the process of attraction and association of solvent molecules with the molecules or ions of a solute.
Hydrophilic vs. Hydrophobic Substances:
Hydrophilic (Water-loving): Substances that mix well and dissolve in water, such as salts.
Hydrophobic (Water-fearing): Substances that do not mix well in water, such as fats and oils.
Mechanisms of Effectiveness: Water is an excellent solvent due to:
Physical Action of Dispersion: High activity of water molecules at the surface of the solute causes the dispersion of solute molecules.
High Dielectric Constant: Water has a dielectric constant of that of a vacuum. This diminishes the effectiveness of the attractive forces (electrostatic forces) that hold solute molecules together.
Hydration: Chemical complexes, such as hydrogen bonds, form between the water and the solute molecules.
Thermodynamic States and Entropy of Water
Steam: In the gaseous state, molecules show no evidence of intermolecular hydrogen bonding.
Liquid: As energy is removed from steam, the amount of hydrogen bonding increases.
Ice: Shows evidence of rigid, structured bonding as more energy is removed.
Entropy () and Phase Changes:
Entropy increases from Solid → Liquid → Vapor.
Heating Solid: Leads to the Melting of the solid.
Heating Liquid: Leads to the Evaporation of the liquid.
Heating Vapor: Increases temperature further in the gaseous state.
Classification and States of Water in Food Systems
Bulk Water (Free Water):
Free from other constituents; each molecule is surrounded only by other water molecules.
Acts as a dispersing agent for colloids and as a solvent for salts and sugars.
It is free-flowing and the primary solvent for chemical and biochemical reactions in food.
Bound Water: This water is held tightly to other molecules and exhibits no flow properties. It is not free to act as a solvent, has a higher density than free water, and exhibits essentially no vapor pressure. It can only be frozen at very low temperatures (below the standard freezing point of water) and cannot be expressed from tissues.
Physically Bound Water: Water molecules not completely surrounded by other water, but in molecular contact with food constituents like proteins, carbohydrates, or minerals.
Chemically Bound Water (Water of Hydration): Bonded to other molecules as water of crystallization or as hydrates (e.g., lactose monohydrate or ).
Heterogeneity of Bound Water:
Monolayer Water: Strongly bound to food and restricted in movement due to charges, hydrogen bonds, or physical entrapment. It is extremely difficult to remove completely.
Multilayer Water: Additional layers of water around the food particle. These are easier to remove than the monolayer.
Entrapped Water: Water immobilized in capillaries, cells, or gels (like pectin gels, fruits, and vegetables). If the structure is damaged or cut, this water is released and becomes free to flow. It is also known as capillary water. It has the properties of free water but lacks the properties of bound water.
Water Activity () and Adsorption Isotherms
Three Forms of Water Found in Food (Per Isotherm Types):
Type I (Bound Water): Water adsorbed on the surface of macromolecular colloids (water of hydration). Forces include hydrogen bonding and Van der Waals forces.
Type II (Monolayer/Multilayer Moisture): Includes the adsorbed monolayer and the addition of the first few multilayers.
Type III (Free Water): Water that fills intergranular spaces and pores. It is mobile, retains the properties of pure water, and acts as a solvent and dispersing agent.
Water Activity Definition:
Modern Definition: A measure of the energy status of the water in a system.
Thermodynamic/Old Definition: The amount of "free" or "available" water in a product compared to "bound" water.
Formula:
= Vapor pressure of water above the sample at temperature .
= Vapor pressure of pure water at the same temperature .
Relationship to Relative Humidity: By multiplying by , the Equilibrium Relative Humidity () is obtained: .
Water Activity vs. Moisture Content:
Moisture Content: Ratio of water mass to dry or total mass; an quantitative, extensive property.
Water Activity: A qualitative, intensive property measuring energy status; essential for predicting shelf-life and stability.
Microbial Stability and Spoilage Growth Limits
Perishability Indicator: Water activity is a better indicator of food perishability than water content (). Microorganisms have limiting levels below which they cannot grow.
General Limits:
Low Moisture Foods: (generally protected from microbial spoilage).
Intermediate Moisture Foods: between and .
High Moisture Foods: (highly susceptible to spoilage).
Specific Microbial Growth Limits ():
: Gram Negative Bacteria (e.g., Salmonella species, Fresh meat, milk).
: Yeast practical limit (e.g., Torulopsis species, Fruit juice concentrate).
: Gram Positive Bacteria (e.g., Clostridium botulinum).
: Production of mycotoxins; Normal Molds (e.g., Aspergillus flavus, Jams/Jellies).
: Halophilic bacteria (e.g., Wallemia sebi, Honey).
: Molds practical limit.
: Xerophilic molds (e.g., Aspergillus echinulatas, Flour).
: Osmophilic yeast.
: Xerophilic molds.
: Absolute limit for all growth (e.g., Saccharomyces bisporus, Dried fruits).
Chemical and Biochemical Stability Factors
Mobility and Diffusion: Rate of moisture migration, drying, and crystallization are controlled by the diffusivity of water. The diffusion coefficient decreases as moisture content decreases.
Non-Solvent Water Content: The critical amount of water needed for significant solute diffusion. Below this value, solute motion (rotational correlation time) is near zero.
Lipid Oxidation:
Has a minimum reaction rate at approximately .
At very low , oxidation occurs via free radicals.
Above the BET monolayer value, antioxidants and chelating agents become soluble and reduce the rate.
At high , metal catalysts become soluble and the food structure swells, exposing reactive sites.
Maillard Browning (Non-enzymatic):
Involves free amines (amino acids) and carbonyl groups (reducing sugars).
Maximum loss of amino nitrogen occurs at .
At high moisture levels, browning is slowed by "end product inhibition" (water is a product of the condensation reaction) or dilution.
Enzyme Activity:
Water dissolves substrates and increases mobility.
Most reactions slow down below .
Activity ceases below the BET monolayer value due to low substrate mobility.
Thermal treatment usually addresses enzymatic spoilage concerns.
Physical Properties and Glass Transitions
Phase Transitions: Abrupt changes in physical properties (like heat capacity) with small changes in variables like temperature (e.g., melting, freezing, evaporation).
Amorphous State: A solid with no long-range order. Often prepared by rapid cooling to reduce molecular mobility before crystallization can occur.
Glassy vs. Rubbery States:
Glassy State: Low temperature; molecules are frozen in place, rigid, hard, and brittle.
Rubbery State: If heated above the glass transition temperature (), the secondary non-covalent bonds weaken, and the material becomes soft, flexible, and elastic.
Glass Transition (): A second-order transition occurring in amorphous regions. Below , the system is "frozen" and stable.
Melting (): A first-order transition occurring in crystalline regions involving heat transfer and abrupt volume changes.
Plasticizing Effect of Water: Water acts as a plasticizer, promoting mobility for structural reorganization. In foods like bread:
Low moisture: Glassy and brittle.
Increased moisture: Leathery (in the transition region).
High moisture: Promotes starch recrystallization and retrogradation.
Agglomeration of Powders
Process: Occurs when particle surfaces become liquid and form a liquid bridge.
Control Factors: Controlled by surface tension and film viscosity.
Higher surface tension increases the tendency to coalesce.
Higher viscosity or lower initial partial radius () decreases the tendency to coalesce.
Increase in moisture decreases viscosity, encouraging agglomeration.
Controlling Water Activity and Moisture Migration
Moisture Migration: Movement of water between regions in complex foods (e.g., cream-filled cake, chocolate with coating) can cause texture changes, microbial growth, and degradation.
Control Solutions:
Adjust components to the same .
Retard diffusion by increasing viscosity.
Use edible barriers or films.
Use separate packaging.
Additives and Humectants:
Salts: .
Sugars: Glucose, fructose, sucrose, syrups.
Glycols: Glycerol, PEG, propylene glycol.
Amino Acids: Glycine, alanine.
Polymers: Starch, gums.
Acids: Citric acid, lactic acid.
Other: Anticaking agents.
Limitations on Additives: Solubility, molecular weight, organoleptic changes, and potential crystallization during storage.
Moisture Sorption Isotherms and Measurement
Definition: The relationship between water activity and equilibrium moisture content at a specified temperature.
Hysteresis: The difference between the adsorption isotherm curve and the desorption isotherm curve.
Magnitude and shape vary with food nature and temperature.
Hysteresis is less detectable at high temperatures ().
Caused by phase transitions, capillary phenomena, and non-equilibrium states.
Measurement Methods:
Method A: Food of known moisture content is equilibrated in a tight enclosure; is measured manometrically or via relative humidity sensors.
Method B: Exposure of a small food sample to constant humidity atmospheres (saturated salt solutions) and measuring moisture change gravimetrically.
Saturated Salt solutions used: , , , , and .