Alberta Basic Licence Drivers Assessment Study Guide
Speed Limits and Standard Highway Rules
- Primary Highway Speed Limits: Unless otherwise posted, the basic speed limit outside a city, town, or village on a primary highway is 100km/h.
- Standard Speed Signs: Speed limit signs indicate the maximum speed permitted when driving conditions are favourable; they do not represent a speed that should be maintained under all conditions.
- School Zone Speeds:
* Urban Areas: In urban areas, speed limits are strictly enforced during specific hours: 8:00A.M. to 9:30A.M., 11:30A.M. to 1:30P.M., and 3:00P.M. to 4:30P.M..
* Rural Areas: At 9:00A.M. on a school day in a rural area, the maximum speed permitted is 30km/h unless otherwise posted.
- Playground Zone Hours: Playground zones are in effect from 8:30A.M. to 1hour after sunset.
- Construction Zone Compliance: Speed limits in construction zones must be obeyed at all times, regardless of whether workers or flag persons are present.
- Approaching Hills: When approaching the top of a hill on a two-lane highway, drivers should stay to the right portion of the lane to ensure safety from oncoming traffic.
- Slow-Moving Vehicles: Any vehicle that normally travels at speeds less than 40km/h must display a "slow-moving vehicle" sign on the rear.
Intersection Rules and Traffic Signals
- Traffic Control Light Navigation:
* Green Arrow and Red Light: A driver facing a green right-turn arrow and a red light may proceed when safe, without stopping, in the direction of the arrow.
* Flashing Red Light: A driver must stop and proceed only when it is safe to do so.
* Steady Yellow Light: A driver must stop before the intersection unless the stop cannot be made in safety.
* Flashing Yellow Light: This signal indicates that the driver should proceed with caution.
* Flashing Green Light: Not explicitly detailed, but usually indicates a protected turn or pedestrian-activated signal depending on jurisdiction.
- Right Turns on Red: A driver is allowed to turn right at a red traffic light if they come to a complete stop and there is no traffic, pedestrian, or sign prohibiting the turn.
- Left Turns at Intersections:
* Steady Green Light: A driver attempting to turn left must not cross the path of an approaching vehicle unless it is safe to do so.
* Turning onto One-Way Roads: When turning left from a two-way road onto a one-way road, the vehicle should enter the lane nearest the curb on the left side of the one-way road.
* One-Way to One-Way: Unless otherwise permitted, a driver must be in the left lane nearest the left curb to turn left from a one-way road.
- Uncontrolled Intersections:
* Definition: An uncontrolled intersection has no traffic control signal lights or traffic signs.
* T-Intersections: When two vehicles approach an uncontrolled "T" intersection at right angles at approximately the same time, the vehicle on the left must yield the right-of-way.
- Traffic Circles: A driver entering a traffic circle must yield to vehicles already in the traffic circle.
- Dual Turns: Dual turns are only permitted at an intersection when indicated by pavement markings or traffic control signs.
Lane Usage and Pavement Markings
- Pavement Lines:
* Single Solid White Line: In an urban area, this indicates that lane changing is not permitted between driving lanes.
* Solid and Broken Yellow Lines: If the broken line is on the driver's side, passing is permitted. If the solid line is on the driver's side, passing is not permitted.
* Large Painted X: Indicates a railway crossing ahead.
- Specialized Lanes:
* Acceleration Lane: A lane in a merge area for use by vehicles entering the highway to increase speed.
* Deceleration Lane: A lane where vehicles reduce speed when exiting a highway.
* Parking Lane: Defined as the portion of a primary highway between the edge of the roadway to the right of traffic flow and the nearest solid white line (not the centre line).
* Passing Lane: When a "PASSING LANE AHEAD" sign is posted, slower moving vehicles should move into the right lane when it is safe.
* Weave Zone: A section of a highway where entrance and exit lanes are close together; vehicles slowing to exit must drive between vehicles accelerating to enter.
- Lane Changes:
* Traffic-Lane Control Lights: An illuminated red "X" means travel is not permitted in that lane.
* Merging: When in the right lane and another vehicle is merging from an acceleration lane, the driver should move into the left lane if safe or adjust speed to accommodate the merge.
Vehicle Manoeuvres and Parking Regulations
- Reversing Procedures:
* Straight Line: Place the left hand at the top of the steering wheel and look over the right shoulder through the rear window.
* To the Left: Look over the left shoulder with occasional glances to the front to make steering adjustments.
- Shoulder Checking: This involves glancing toward the blind spot in the direction the driver intends to move.
- Parallel Parking:
* Curb Distance: The wheels closest to the curb must be within a maximum distance of 30cm.
* Exiting: Before leaving a parallel parking space on the right side of the road, the driver should shoulder check to the left.
- Angle Parking: The vehicle's front wheel must be within a maximum distance of 50cm from the nearest curb.
- Parking Restrictions:
* Stop Signs: A vehicle cannot be parked within 5m of a Stop sign.
* Fire Hydrants: A vehicle must be parked at least 5m from a fire hydrant.
* Disability Parking: Parking in reserved spaces is only permitted if the vehicle has a proper identifying placard or licence plate.
- Parking Uphill: When parked uphill on a two-way road with a curb, the front wheels should be turned to the left.
Safety Procedures and Hazard Management
- Skid Recovery: Most skids are caused by driver error. To recover, a driver should steer in the direction they want the front of the vehicle to go.
- Braking Techniques:
* Smooth Stop: Apply brake pressure, ease off slightly just before the vehicle stops, then re-apply sufficient pressure to stop.
* Threshold Braking (Non-ABS): Apply even braking force to the point just before the wheels lock, easing off slightly if they do lock.
- Following Distance: The 2−second rule is considered an accurate way to judge safe following distance at any speed.
- Following Distance for Stops: When stopping behind another vehicle in traffic, allow sufficient space to move into another lane without reversing.
- Night Driving:
* Nighttime Definition: The period beginning 1hour after sunset and ending 1hour before the following sunrise.
* Headlight Dimming: Headlights must be dimmed to low beams at a minimum distance of 150m when approaching another vehicle from behind and 300m when approaching from the front.
* Over-driving Headlights: Travelling at a speed that does not permit the driver to see an object in time to stop.
- Visibility Conditions: Use headlights on low beam during fog, smoke, or snow.
- Tires Off Road: If right tires travel off the pavement, keep a firm grip on the steering wheel, ease off the gas, and gradually return to the paved portion.
Graduated Driver Licensing (GDL) and Legal Requirements
- Demerit Point System:
* Non-probationary Driver: Suspended at 15points.
* Class 7 Learner: Suspended at 8demerits.
* Seat Belt Violations: GDL drivers receive 2demerits for failure to use seat belts or having more passengers than seat belts.
- Class 7 Learner Restrictions:
* Prohibited Driving Hours: Between Midnight and 5:00A.M..
- Probationary Period: A person must serve as a probationary Class 5 driver for a minimum of 2years.
- Parental Consent: For those under 18, a parent may withdraw consent if the person is not self-supporting or married.
- Reporting Requirements:
* Medical Conditions: The driver is legally obligated to report any medical condition or physical disability affecting driving ability.
* Collisions: Must be reported to police if there are injuries, deaths, or if combined property damage exceeds 1000.
- Passenger Restraint: It is the driver's responsibility to ensure all passengers under the age of 16 are properly restrained.
- Road Test Denial: An examiner will refuse a road test if the vehicle is not mechanically safe.
Interaction with Other Road Users
- Emergency Vehicles: On a two-way road, drivers must drive as close as possible to the right curb/edge and stop when approached by an emergency vehicle with a siren from any direction.
- School Buses:
* Alternating Flashing Red Lights: Drivers must stop behind the bus and wait until the lights stop flashing.
* Alternating Flashing Amber Lights: This serves as a warning that the red lights will soon activate and the bus is preparing to stop.
- Pedestrians:
* Passing Stopped Vehicles: It is illegal to pass a vehicle that has stopped to allow a pedestrian to cross the road.
* Pedestrian Signals: In urban areas, a pedestrian pointing to the opposite curb with their arm raised means drivers must stop and yield.
- Large Trucks:
* Passing: Leave extra room before returning to the lane after passing a large truck.
* Log-Haul Trucks: It is unsafe to pass a loaded log-haul truck that is turning because a "danger zone" exists where the overhang of logs could block all lanes.
- Railway Crossings: If lights and bells are activated, stop at least 5m from the nearest rail until the train has passed.
- Funeral Processions: Drivers must yield the right-of-way and not break through a funeral procession.
- Being Passed: If another vehicle is attempting to pass on a two-way road, the driver should stay in the lane and move to the right portion of the lane.
- Exiting Parking Lots: A vehicle exiting a parking lot onto a roadway must come to a complete stop.
Road Signs Reference
- Regulatory Signs:
* Route for Dangerous Goods: Symbol showing a circle with a diamond inside.
* Do Not Enter: A red circle with a white horizontal bar.
* Reserved Lane: Diamond symbol indicating use by specified vehicles only.
* Yield Sign Ahead: A triangle inside a circle.
- Warning Signs:
* Slippery When Wet: Car with wavy skid marks.
* Divided Highway Ends: Two arrows with a divider at the top.
* Divided Highway Begins: Two arrows with a divider at the bottom.
* Winding Road: A curved arrow indicating multiple turns.
* Bump: A sign indicating an uneven road surface.
* Added Lane (Free Flow): Sign showing a new lane joining the highway where merging is not immediately required.
* Traffic Signal Advance Warning: Sign showing a traffic light symbol.
* Hazard Marker: Slanted stripes indicating an obstruction.
- Information Signs:
* Hospital Services: Blue sign with a white "H".
* Construction: Orange signs indicating people working, flag persons, or detours ahead.