Organic Chemistry II - Final Practice Questions
Chapter 16: Alcohols, Diols, and Thiols
Question 1:
Which method will NOT produce an alcohol?
A) Acid-catalyzed hydration of an alkene
B) Hydroboration-oxidation of an alkene
C) Reaction of a Grignard reagent with an aldehyde
D) Oxidation of an aldehyde
Correct Answer: D) Oxidation of an aldehyde
Explanation:
Oxidation of an aldehyde typically yields a carboxylic acid, not an alcohol.
Question 2:
Which reagent will NOT reduce a ketone to an alcohol?
A)
B)
C)
D)
Correct Answer: B)
Explanation:
(periodic acid) is an oxidizing agent, not a reducing agent. It's used to cleave vicinal diols.
Question 3:
What is the product of the reaction (assuming a reaction of cyclohexene with )?
A) cyclohexanol
B) cyclohexane
C) cyclohexene
D) 1,2-cyclohexanediol
Correct Answer: A) cyclohexanol
Explanation:
Acid-catalyzed hydration of cyclohexene follows Markovnikov's rule, leading to the formation of cyclohexanol.
Question 4:
[The question requires the image of a reaction to be properly answered. Without the image, I cannot determine the correct answer.]
Question 5:
What is the product of the reactions (assuming reduction of a carboxylic acid with followed by workup)?
A)
B)
C)
D)
Correct Answer: B)
Explanation:
is a strong reducing agent that can reduce carboxylic acids to primary alcohols.
Question 6:
What is the product of the reaction (assuming the reaction involves an alkene with )?
A) hexane
B) 1-hexene
C) 1-hexanol
D) 2-hexanol
Correct Answer: A) hexane
Explanation:
Catalytic hydrogenation of 1-hexene with reduces the alkene to an alkane, hexane.
Question 7:
What is the product of the reaction sequence (assuming the reaction sequence involves an alkene reacting with a peroxyacid followed by hydrolysis)?
A) cyclopentene oxide
B) cyclopentene
C) cyclopentane
D) cis-1,2-cyclopentanediol
Correct Answer: D) cis-1,2-cyclopentanediol
Explanation:
Treating cyclopentene with a peroxyacid like forms an epoxide (cyclopentene oxide). Subsequent hydrolysis under acidic or basic conditions opens the epoxide to give a trans-diol. However, the cis-diol can be obtained via other methods like using .
Question 8:
Which cannot be made by reduction of a ketone or aldehyde with in methanol?
A) 1-butanol
B) 2-butanol
C) 2-methyl-1-propanol
D) 2-methyl-2-propanol
Correct Answer: A) 1-butanol
Explanation:
can reduce aldehydes to primary alcohols and ketones to secondary alcohols. 1-butanol is a primary alcohol that would result from the reduction of an aldehyde (butanal). However, the question implies we start with a ketone or aldehyde that, upon reduction, gives options B, C, or D. 2-butanol (B) comes from butanone, 2-methyl-1-propanol (C) from 2-methylpropanal, and 2-methyl-2-propanol (D) from 2-methylpropanone (acetone).
Question 9:
Which reagent achieves the transformation (assuming the transformation is oxidation of an alcohol to a ketone)?
A)
B)
C)
D)
Correct Answer: D)
Explanation:
Pyridinium chlorochromate (PCC) in dichloromethane is a mild oxidizing agent that can oxidize secondary alcohols to ketones without further oxidizing them to carboxylic acids.
Question 10:
The reaction of a Grignard reagent with ethylene oxide followed by dilute acid gives:
A) a primary alcohol.
B) a tertiary alcohol.
C) a secondary alcohol.
D) methanol.
Correct Answer: A) a primary alcohol.
Explanation:
Grignard reagents react with ethylene oxide to add two carbons to the chain and, after protonation, yield a primary alcohol.
Question 11:
Which synthesis gives 3-methyl-1-hexanol?
[The question requires the image of reaction schemes to be properly answered. Without the image, I cannot determine the correct answer.]
Question 12:
Which reagent will convert cyclohexene into cis-1,2-cyclohexanediol?
A)
B)
C) followed by
D) (peroxyacetic acid)
Correct Answer: A)
Explanation:
Osmium tetroxide () with a co-oxidant such as followed by hydrolysis, gives cis-1,2-diols. Peroxyacids give epoxides, which then can be opened to trans-diols.
Question 13:
[The question requires the image of a reaction to be properly answered. Without the image, I cannot determine the correct answer.]
Question 14:
Which reagent would react with a primary alcohol to produce an aldehyde?
A)
B) , followed by
C)
D)
Correct Answer: C)
Explanation:
PCC (pyridinium chlorochromate) is a mild oxidizing agent that oxidizes primary alcohols to aldehydes. Stronger oxidizing agents like would oxidize primary alcohols to carboxylic acids.
Question 15:
Conversion of 1-butanol to which compound requires an oxidizing agent?
A)
B)
C)
D)
Correct Answer: D)
Explanation:
Oxidation is required to convert 1-butanol to butanal ().
Question 16:
Identify the reagent needed to carry out the conversion of a primary alcohol to a carboxylic acid.
A)
B)
C)
D)
Correct Answer: A)
Explanation:
Potassium dichromate in sulfuric acid and water is a strong oxidizing agent that will oxidize a primary alcohol to a carboxylic acid.
Question 17:
Which alcohol is NOT readily oxidized by in ?
A) n-butyl alcohol
B) isobutyl alcohol
C) sec-butyl alcohol
D) tert-butyl alcohol
Correct Answer: D) tert-butyl alcohol
Explanation:
Tertiary alcohols cannot be oxidized without breaking C-C bonds, as they lack a hydrogen on the carbon bearing the hydroxyl group.
Question 18:
[The question requires the image of reaction schemes to be properly answered. Without the image, I cannot determine the correct answer.]
Question 19:
Predict the major product of the reaction sequence [The question requires the image of reaction schemes to be properly answered. Without the image, I cannot determine the correct answer.]
Chapter 17: Ethers, Epoxides, and Sulfides
Question 1:
What is the correct name of the compound (assuming the compound is )?
A) benzyl ethyl ether
B) ethylbenzene ether
C) ethyl phenyl ether
D) ethoxy phenoxy ether
Correct Answer: C) ethyl phenyl ether
Explanation: Common name for is phenyl and - is an ethyl group, so the correct name is ethyl phenyl ether
Question 2:
The name of the ether (assuming the ether is isobutyl propyl ether) is:
A) butyl isopropyl ether.
B) isobutyl propyl ether.
C) sec-butyl isopropyl ether.
D) butyl propyl ether.
Correct Answer: B) isobutyl propyl ether.
Explanation:
Given the structure, the correct IUPAC name is isobutyl propyl ether.
Question 3:
Ethylene glycol reacts in acid to form a cyclic compound with the formula of . Which one is it?
[The question requires the image of cyclic compounds to be properly answered. Without the image, I cannot determine the correct answer.]
Question 4:
Which reaction makes the cyclic ether shown?
[The question requires the image of reaction schemes to be properly answered. Without the image, I cannot determine the correct answer.]
Question 5:
Which yields isopropyl methyl ether as the major product with little or no by-products?
[The question requires the image of reaction conditions to be properly answered. Without the image, I cannot determine the correct answer.]
Question 6:
Which is NOT a good method to make tert-butyl methyl ether?
[The question requires the image of reaction conditions to be properly answered. Without the image, I cannot determine the correct answer.]
Question 7:
What is the major product of the reaction [The question requires the image of reaction schemes to be properly answered. Without the image, I cannot determine the correct answer.]
Question 8:
What is the product of the reaction (assuming the reaction is the ring opening of an epoxide with HBr)?
A) 1,2-dibromobutane
B) 1,3-dibromopropane
C) 1,4-dibromobutane
D) 1,2-dibromopropane
Correct Answer: D) 1,2-dibromopropane
Explanation:
If starting with propene oxide (methyl oxirane) and reacting with HBr, the major product is 1,2-dibromopropane.
Question 9:
What are the products of the reaction [The question requires the image of reaction schemes to be properly answered. Without the image, I cannot determine the correct answer.]
Question 10:
What is the product of the reaction [The question requires the image of reaction schemes to be properly answered. Without the image, I cannot determine the correct answer.]
Question 11:
The reaction can be described as an:
A) acid-base reaction followed by an intramolecular Williamson ether synthesis.
B) acid-base reaction followed by an intramolecular SN1 reaction.
C) E2 reaction followed by an addition reaction to a double bond.
D) SN2 reaction followed by an intramolecular Williamson ether synthesis.
Correct Answer: A) acid-base reaction followed by an intramolecular Williamson ether synthesis.
Explanation:
The reaction starts with deprotonation of an alcohol (acid-base) and is followed by an internal SN2 reaction to form the cyclic ether from an alkyl halide (Williamson ether synthesis).
Question 12:
Which reacts the fastest with ?
A) ethylene oxide (oxirane)
B) cis-2,3-dimethyloxirane
C) trans-2,3-dimethyloxirane
D) 2,2,3,3-tetramethyloxirane
Correct Answer: A) ethylene oxide (oxirane)
Explanation:
The less sterically hindered the epoxide, the faster the ring-opening reaction takes place. Ethylene oxide is the least hindered.
Question 13:
Which reagent(s) convert cyclohexene to trans-1,2-cyclohexanediol?
[The question requires the image of reaction schemes to be properly answered. Without the image, I cannot determine the correct answer.]
Question 14:
What is the product of the reaction shown?
[The question requires the image of a reaction to be properly answered. Without the image, I cannot determine the correct answer.]
Question 15:
What is the product of the following reaction (assuming the reaction is the ring opening of an epoxide with a Grignard reagent)?
A) 1-pentanol
B) 2-pentanol
C) 2-methyl-1-butanol
D) 2-methyl-2-butanol
Correct Answer: C) 2-methyl-1-butanol
Explanation:
Assuming the epoxide is ethylene oxide and the Grignard reagent is propylmagnesium bromide, the reaction would yield 2-methyl-1-butanol after protonation.
Question 16:
What reagents and/or reaction sequence would convert trans-3-hexene to meso-3,4-hexanediol?
A)
B) followed by
C) followed by
D) followed by
Correct Answer: D) followed by
Explanation:
Using a peroxyacid (like ) forms an epoxide with trans stereochemistry. Base-catalyzed hydrolysis of this epoxide gives anti (which translates to meso in this specific case) addition, leading to the meso-3,4-hexanediol.
Question 17:
What reagents and/or reaction sequence below would convert cis-3-hexene to meso-3,4-hexanediol?
A)
B) followed by
C) followed by
D) followed by
Correct Answer: A)
Explanation:
Syn-dihydroxylation of cis-3-hexene yields the meso product.
Question 18:
Which reagent(s) converts ethylene oxide into the compound shown?
[The question requires the image of the product to be properly answered. Without the image, I cannot determine the correct answer.]
Question 19:
Which of the following reagents best achieves the reaction shown?
[The question requires the image of the reaction to be properly answered. Without the image, I cannot determine the correct answer.]
Question 20:
What is the product of the reactions?
[The question requires the image of a reaction to be properly answered. Without the image, I cannot determine the correct answer.]
Chapter 18: Aldehydes and Ketones: Nucleophilic Addition to the Carbonyl Group
Question 1:
Which of the following is 3-ethyl-2-hexanone?
[The question requires the image of structures to be properly answered. Without the image, I cannot determine the correct answer.]
Question 2:
What is the IUPAC name of the compound (assuming the compound has a heptane chain with a ketone at position 3 and a methyl at position 5)?
A) 3-methyl-5-heptanone
B) 5-ethyl-3-hexanone
C) 5-methyl-3-heptanone
D) 2-ethyl-4-hexanone
Correct Answer: C) 5-methyl-3-heptanone
Explanation:
The longest chain is heptane, the ketone is at position 3, and there's a methyl group at position 5. Thus, the IUPAC name is 5-methyl-3-heptanone.
Question 3:
Identify the correct IUPAC name of the compound shown.
[The question requires the image of structures to be properly answered. Without the image, I cannot determine the correct answer.]
Question 4:
Which reagents oxidize secondary alcohols to ketones?
A)
B)
C)
D)
Correct Answer: C)
Explanation:
(potassium dichromate in sulfuric acid) is a strong oxidizing agent that will oxidize secondary alcohols to ketones.
Question 5:
What is the product of the reaction (assuming the reaction is a Grignard reaction with a ketone)?
A) 3-methylpentane
B) 3-methyl-2-pentanol
C) 3-methyl-2-pentene
D) 3-methyl-1-pentyne
Correct Answer: B) 3-methyl-2-pentanol
Explanation:
The Grignard reagent adds to the carbonyl of a ketone, forming an alcohol after protonation. The product is a tertiary alcohol.
Question 6:
What is the product of the reaction?
[The question requires the image of a reaction to be properly answered. Without the image, I cannot determine the correct answer.]
Question 7:
What is the product of the reaction shown?
[The question requires the image of a reaction to be properly answered. Without the image, I cannot determine the correct answer.]
Question 8:
Acid-catalyzed hydrolysis of the cyclic acetal below gives:
A) ethanal and 2-chlorocyclohexanol.
B) 1,2-ethanediol and 2-chlorocyclohexanol.
C) ethanol and 2-chlorocyclohexanol.
D) 1,2-ethanediol and 2-chlorocyclohexanone.
Correct Answer: D) 1,2-ethanediol and 2-chlorocyclohexanone.
Explanation:
Hydrolysis of an acetal regenerates the carbonyl compound and the alcohol(s) that formed the acetal. In this case, the products are 1,2-ethanediol (ethylene glycol) and 2-chlorocyclohexanone.
Question 9:
Which of the following is a hemiacetal?
[The question requires the image of structures to be properly answered. Without the image, I cannot determine the correct answer.]
Question 10:
Which of the following is an acetal?
[The question requires the image of structures to be properly answered. Without the image, I cannot determine the correct answer.]
Question 11:
Identify the products of the hydrolysis of the compound shown.
[The question requires the image of the structure to be properly answered. Without the image, I cannot determine the correct answer.]
Question 12:
What is the product of the reaction shown?
[The question requires the image of a reaction to be properly answered. Without the image, I cannot determine the correct answer.]
Question 13:
Which one of the following gives ethanal, , as one of two products when added to an aqueous solution of ?
[The question requires the image of structures to be properly answered. Without the image, I cannot determine the correct answer.]
Question 14:
Which of the following is the product of the reaction between acetone, , and methylamine, ?
[The question requires the image of structures to be properly answered. Without the image, I cannot determine the correct answer.]
Question 15:
Identify the missing reagent for the reaction shown.
[The question requires the image of a reaction to be properly answered. Without the image, I cannot determine the correct answer.]
Question 16:
Which of the following reacts with to give the compound shown below?
[The question requires the image of structures to be properly answered. Without the image, I cannot determine the correct answer.]
Question 17:
What is the product of the following reaction sequence?
[The question requires the image of a reaction to be properly answered. Without the image, I cannot determine the correct answer.]
Question 18:
What is the major product of the reaction sequence shown?
A) 2-methyl-1-hexene
B) 2,3-dimethyl-2-pentene
C) 2-methyl-2-hexene
D) 3-methyl-1-hexene
Correct Answer: C) 2-methyl-2-hexene
Explanation:
The reaction sequence likely involves a Wittig reaction. Depending on the specific reagents and conditions, the major product would be the more stable alkene, which is typically the more substituted alkene. Among the options, 2-methyl-2-hexene is the most substituted.
Question 19:
Which structure is consistent with this 1H NMR spectrum?
[The question requires the image of the NMR spectrum to be properly answered. Without the image, I cannot determine the correct answer.]
Question 20:
What reagent would you use to accomplish this (epoxidation)?
A)
B) cat. , tBuOOH
C)
D) air does this slowly
Correct Answer: C)
Explanation:
A peroxyacid, like , is commonly used for epoxidation of alkenes.
Chapter 19: Carboxylic Acids
Question 1:
What is the IUPAC name of the compound (assuming the compound is 3-hydroxy-2-methylbutanoic acid)?
A) 4-hydroxy-3-methylbutanoic acid
B) 3-hydroxy-2-methylbutanoic acid
C) 1-hydroxy-2-methylbutanoic acid
D) 3-(hydroxymethyl)butanoic acid
Correct Answer: B) 3-hydroxy-2-methylbutanoic acid
Explanation:
The parent chain is butanoic acid, with a hydroxyl group at position 3 and a methyl group at position 2. Thus, the IUPAC name is 3-hydroxy-2-methylbutanoic acid.
Question 2:
What is the systematic IUPAC name of the compound below (assuming a benzene ring with a carboxylic acid, a bromo group at position 2 and an ethyl group at position 4)?
A) 6-bromo-4-ethylbenzenecarboxylic acid
B) 2-bromo-4-ethylbenzenecarboxylic acid
C) ortho-bromo-para-ethylbenzoic acid
D) 1-bromo-3-ethylbenzoic acid
Correct Answer: B) 2-bromo-4-ethylbenzenecarboxylic acid
Explanation:
The carboxylic acid group is given priority as position 1. Therefore, the bromo group is at position 2, and the ethyl group is at position 4. Hence, 2-bromo-4-ethylbenzenecarboxylic acid is the correct IUPAC name.
Question 3:
Rank the following compounds in order of decreasing acidity.
[The question requires the image of structures to be properly answered. Without the image, I cannot determine the correct answer.]
Question 4:
Which of the following would be the strongest acid?
[The question requires the image of structures to be properly answered. Without the image, I cannot determine the correct answer.]
Question 5:
What is the product of the reaction shown?
[The question requires the image of a reaction to be properly answered. Without the image, I cannot determine the correct answer.]
Question 6:
What product(s) would you expect from the following reaction?
[The question requires the image of a reaction to be properly answered. Without the image, I cannot determine the correct answer.]
Question 7:
Which of the following methods does not work to synthesize benzoic acid?
[The question requires the image of methods to be properly answered. Without the image, I cannot determine the correct answer.]
Question 8:
Only one of the reactin sequences below can carry out the transformation. Identify which reaction sequence it is.
[The question requires the image of a reaction sequence to be properly answered. Without the image, I cannot determine the correct answer.]
Question 9:
Which of the following is the product of the reaction sequence shown?
[The question requires the image of a reaction sequence to be properly answered. Without the image, I cannot determine the correct answer.]
Question 10:
To convert a nitrile to a carboxylic acid, you need to:
A) hydrolyze with aqueous acid ().
B) reduce with .
C) reduce with .
D) oxidize with .
Correct Answer: A) hydrolyze with aqueous acid ().
Explanation:
Nitriles can be hydrolyzed under acidic conditions to form carboxylic acids.
Question 11:
What is the product of the reaction shown?
[The question requires the image of a reaction to be properly answered. Without the image, I cannot determine the correct answer.]
Question 12:
What is the product of the reaction sequence shown?
[The question requires the image of a reaction sequence to be properly answered. Without the image, I cannot determine the correct answer.]
Question 13:
What is the product of the following sequence of reactions?
A)
B)
C)
D)
Correct Answer: D)
Explanation:
The sequence likely involves hydroboration-oxidation of an alkene, followed by oxidation of the resulting alcohol to a carboxylic acid. The alkene would be (CH3)2C=CH2
Question 14:
Which of the following is not a good method to make 2,2-dimethylpropanoic acid?
[The question requires the image of methods to be properly answered. Without the image, I cannot determine the correct answer.]
Question 15:
Which of the following is the tetrahedral intermediate in the acid-catalyzed Fischer esterification reaction of acetic acid, , and ethanol, ?
[The question requires the image of structures to be properly answered. Without the image, I cannot determine the correct answer.]
Question 16:
Identify the lactone formed by the following hydroxy carboxylic acid.
[The question requires the image of structures to be properly answered. Without the image, I cannot determine the correct answer.]
Question 17:
Which hydroxy carbolic acid can be converted to the following lactone?
[The question requires the image of structures to be properly answered. Without the image, I cannot determine the correct answer.]
Question 18:
What is the product of the thermal decarboxylation of dimethylpropanedioic acid?
A) propanoic acid
B) 2-methylpropanoic acid
C) 2,2-dimethylpropanoic acid
D) acetic acid
Correct Answer: C) 2,2-dimethylpropanoic acid
Explanation:
Decarboxylation removes one carboxylic acid group. The starting material is dimethylmalonic acid, therefore after decarboxylation the product has to be 2,2-dimethylpropanoic acid.
Question 19:
Which one of the following compounds undergoes decarboxylation upon heating?
[The question requires the image of structures to be properly answered. Without the image, I cannot determine the correct answer.]
Question 20:
Which of the following is the enol intermediate in the thermal decarboxylation of methylpropanedioic acid, ?
[The question requires the image of structures to be properly answered. Without the image, I cannot determine the correct answer.]
Chapter 20: Carboxylic Acid Derivatives: Nucleophilic Acyl Substitution
Question 1:
What is the name of the following compound (assuming the compound is ethyl 2-chlorohexanoate)?
A) 2-chlorohexyl ethanoate
B) 1-chlorohexyl ethanoate
C) ethyl 2-chlorohexanoate
D) ethyl 1-chlorohexanoate
Correct Answer: C) ethyl 2-chlorohexanoate
Explanation:
It's an ethyl ester of a 2-chlorohexanoic acid.
Question 2:
What is the name of the compound shown (assuming the compound is 2-bromo-N-methylpentanamide)?
A) 2-bromo-N-methylpentanamide
B) 2-bromo(methylamino)pentanamide
C) methylamino 2-bromopentanamide
D) methyl 2-bromopentanamide
Correct Answer: A) 2-bromo-N-methylpentanamide
Explanation:
The compound is an N-substituted amide with a bromine at the 2-position of a pentanoic acid derivative.
Question 3:
Which one of the following does not give butanoic acid when hydrolyzed with aqueous hydrochloric acid?
[The question requires the image of structures to be properly answered. Without the image, I cannot determine the correct answer.]
Question 4:
The following tetrahedral intermediate breaks down to:
A) propanoyl chloride and .
B) propanoic acid and .
C) propanal and .
D) methyl propanoate and .
Correct Answer: D) methyl propanoate and .
Explanation:
The tetrahedral intermediate is likely formed during the reaction of propanoyl chloride and methanol. Breakdown of this intermediate regenerates methyl propanoate and HCl.
Question 5:
What is(are) the major organic product(s) of the following reaction? (Assuming the reaction is ester hydrolysis under acidic conditions)
[The question requires the image of a reaction to be properly answered.