Co-ordinate Geometry

Introduction to Co-ordinate Geometry

  • Definition of Co-ordinate Geometry: Co-ordinate Geometry is the branch of mathematics in which an ordered pair of two numbers, termed co-ordinates, is utilized to specify and locate the exact position of a point with respect to two mutually perpendicular number lines known as co-ordinate axes.

  • Structural Division of the Discipline:

    • Co-ordinate: Pertains directly to the identification, measurement, and location of points in a reference plane.

    • Geometry: Pertains to the study of relations, configurations, and properties of various figures formed by these points.

    • Synthesized Scope: Co-ordinate Geometry systematically unites the algebraic representation of point locations with their geometric relationships in plane figures.

Dependent and Independent Variables in Linear Equations

  • Variables in Linear Equations: In standard linear algebraic formulations such as 3x+4y=53x + 4y = 5, x−3y+8=0x - 3y + 8 = 0, y=mx+cy = mx + c, and x=5y−8x = 5y - 8, the alphabetic characters xx and yy represent variables whose values can vary across the real number line.

  • Dependent Variable with Respect to yy:

    • If a linear relationship in terms of xx and yy is rearranged such that yy is isolated as the subject of the formula (equation), yy is categorized as the dependent variable, whereas xx serves as the independent variable.

    • The value assigned to yy is functionally determined by the value arbitrarily chosen for xx.

    • Illustrative Equations (yy dependent, xx independent):

      • y=3x−6y = 3x - 6

      • y=5−x4y = 5 - \frac{x}{4}

      • y=2(3x−5)+7y = 2(3x - 5) + 7

      • y=4x+9y = 4x + 9

  • Dependent Variable with Respect to xx:

    • If a linear equation is rearranged such that xx is isolated as the subject of the formula (equation), xx is categorized as the dependent variable, whereas yy serves as the independent variable.

    • The value assumed by xx is functionally determined by the value chosen for yy.

    • Illustrative Equations (xx dependent, yy independent):

      • x=5y+7x = 5y + 7

      • x=5(5y+8)−10x = 5(5y + 8) - 10

      • x=7−2y3x = 7 - \frac{2y}{3}

      • x=3y−5x = 3y - 5

  • Worked Demonstration: Variable Conversion:

    • Given the initial linear equation: 4x−5y+20=04x - 5y + 20 = 0

    • Expressing xx as dependent and yy as independent:

      • 4x−5y+20=04x - 5y + 20 = 0

      • 4x=5y−204x = 5y - 20

      • x=54y−5x = \frac{5}{4}y - 5

    • Expressing yy as dependent and xx as independent:

      • 4x−5y+20=04x - 5y + 20 = 0

      • −5y=−4x−20-5y = -4x - 20

      • 5y=4x+205y = 4x + 20

      • y=45x+4y = \frac{4}{5}x + 4

Concept and Properties of Ordered Pairs

  • Definition: An ordered pair represents a collection of two distinct mathematical entities or numbers considered in a precise, non-interchangeable sequence.

  • Relevance to Co-ordinate Geometry: An ordered pair signifies a pairing of two real numbers where the specific sequential arrangement is mandatory for designating position.

  • Notational Conventions:

    • The two components are written in strict sequence, separated by a comma, and contained within round brackets (parentheses).

    • Representative examples: (5,7)(5, 7), (−6,8)(-6, 8), (0,0)(0, 0), (0,−6)(0, -6), (5,0)(5, 0), (3,−2)(3, -2).

  • Structural Components: In any arbitrary ordered pair (a,b)(a, b), the initial element aa is designated as the first component, and the subsequent element bb is designated as the second component.

  • Non-Commutative Nature: Order is strictly invariant; transposing elements alters the identity of the pair unless the elements are identical:

    • (5,7)≠(7,5)(5, 7) \neq (7, 5)

  • Equality of Ordered Pairs: Two ordered pairs are considered equal if and only if their respective corresponding components are independently equal:

    • (a,b)=(c,d)  ⟺  a=c and b=d(a, b) = (c, d) \iff a = c \text{ and } b = d

  • Identity of Components: Both components of an ordered pair may assume identical values without violating definition:

    • Representative identical pairs: (5,5)(5, 5), (−6,−6)(-6, -6), (0,0)(0, 0).

  • Worked Demonstration: Equating Components:

    • Problem 1: Find the values of xx and yy given that (x,4)=(−7,y)(x, 4) = (-7, y).

      • Equating first components: x=−7x = -7

      • Equating second components: y=4y = 4

    • Problem 2: Find the values of xx and yy given that (x−3,6)=(4,x+y)(x - 3, 6) = (4, x + y).

      • Equating first components: x−3=4  ⟹  x=7x - 3 = 4 \implies x = 7

      • Equating second components: 6=x+y6 = x + y

      • Substituting the known value of xx: 6=7+y  ⟹  y=6−7=−16 = 7 + y \implies y = 6 - 7 = -1

      • Final evaluated variables: x=7x = 7, y=−1y = -1

The Cartesian Plane and Co-ordinate Axes

  • Definition: A Cartesian plane (or co-ordinate plane) consists of two mutually perpendicular real number lines intersecting concurrently at their respective zero marks.

  • Constituent Elements of the System:

    • Horizontal Axis (xx-axis): Denoted as the directed horizontal line XOX′XOX'.

    • Vertical Axis (yy-axis): Denoted as the directed vertical line YOY′YOY'.

    • Origin (OO): The central point of orthogonal intersection, functioning simultaneously as the zero reference mark for both number lines.

  • Cartesian Co-ordinate System: The integrated geometric structure formed collectively by the horizontal xx-axis, the vertical yy-axis, and the central origin OO.

  • Co-ordinate Axes: The formal collective term applied specifically to the combined pairing of the xx-axis and yy-axis.

Co-ordinates of Points

  • Position Determination: The spatial location of any arbitrary point located on a co-ordinate plane is unambiguously determined by an ordered pair of numbers referenced against the perpendicular axes.

  • Step-by-Step Measurement Procedure:

    • Step 1 (Abscissa / xx-co-ordinate): Commencing at the origin OO, measure the linear displacement of the point directed along the horizontal xx-axis. This measured scalar is designated the xx-co-ordinate or abscissa.

    • Step 2 (Ordinate / yy-co-ordinate): Commencing at the origin OO, measure the linear displacement of the point directed along the vertical yy-axis. This measured scalar is designated the yy-co-ordinate or ordinate.

  • Formal Point Specification:

    • Co-ordinates of a point=(abscissa,ordinate)=(x,y)\text{Co-ordinates of a point} = (\text{abscissa}, \text{ordinate}) = (x, y)

    • Syntactically, the abscissa always strictly precedes the ordinate, separated by a comma and enclosed in parentheses.

Quadrants and Sign Conventions

  • Partitioning of the Plane: The orthogonal intersection of the co-ordinate axes bifurcates the infinite two-dimensional Cartesian plane into four planar sectors designated as quadrants.

  • Classification of Planar Locations: Every individual point situated on the plane falls either within the interior of one of the four quadrants or directly upon one of the co-ordinate axes.

  • Standard Quadrant Nomenclature (Anti-Clockwise Progression from OXOX):

    • First Quadrant (XOYXOY): Defined by the positive horizontal ray OXOX and positive vertical ray OYOY.

    • Second Quadrant (YOX′YOX' or X′OYX'OY): Defined by the negative horizontal ray OX′OX' and positive vertical ray OYOY.

    • Third Quadrant (X′OY′X'OY'): Defined by the negative horizontal ray OX′OX' and negative vertical ray OY′OY'.

    • Fourth Quadrant (Y′OXY'OX or XOY′XOY'): Defined by the positive horizontal ray OXOX and negative vertical ray OY′OY'.

  • Universal Sign Conventions:

    • First Quadrant (XOYXOY): Abscissa is positive, Ordinate is positive: (+,+)(+, +)

    • Second Quadrant (X′OYX'OY): Abscissa is negative, Ordinate is positive: (−,+)(-, +)

    • Third Quadrant (X′OY′X'OY'): Abscissa is negative, Ordinate is negative: (−,−)(-, -)

    • Fourth Quadrant (XOY′XOY'): Abscissa is positive, Ordinate is negative: (+,−)(+, -)

Procedures for Plotting Points

  • Execution Algorithm for Plotting (x,y)(x, y):

    • Step 1: From the reference origin O(0,0)O(0, 0), traverse along the xx-axis by a magnitude equal to ∣x∣|x| units—moving to the right if x>0x > 0, or to the left if x<0x < 0.

    • Step 2: From that horizontal offset location, traverse parallel to the vertical yy-axis by a magnitude equal to ∣y∣|y| units—moving upward if y>0y > 0, or downward if y<0y < 0. Position a distinct dot at the terminal coordinates and assign its literal alphabetical label.

  • Plotting Demonstrations:

    • A(4,2)A(4, 2): Move 44 units right along the positive xx-axis; subsequently advance 22 units upward parallel to the positive yy-axis.

    • B(−5,3)B(-5, 3): Move 55 units left along the negative xx-axis; subsequently advance 33 units upward parallel to the positive yy-axis.

    • C(−4,−5)C(-4, -5): Move 44 units left along the negative xx-axis; subsequently advance 55 units downward parallel to the negative yy-axis.

    • D(5,−2)D(5, -2): Move 55 units right along the positive xx-axis; subsequently advance 22 units downward parallel to the negative yy-axis.

  • Special Boundary Properties of the Co-ordinate System:

    • The Origin: The co-ordinates of the origin OO are uniquely given by (0,0)(0, 0).

    • Locus of the xx-axis: For any point residing on the horizontal axis, the vertical displacement is zero; its ordinate is identically zero. Coordinates assume the invariant algebraic form (x,0)(x, 0).

      • Representative instances: (7,0)(7, 0), (3,0)(3, 0), (0,0)(0, 0), (−4,0)(-4, 0), (−8,0)(-8, 0).

    • Locus of the yy-axis: For any point residing on the vertical axis, the horizontal displacement is zero; its abscissa is identically zero. Coordinates assume the invariant algebraic form (0,y)(0, y).

      • Representative instances: (0,8)(0, 8), (0,3)(0, 3), (0,0)(0, 0), (0,−2)(0, -2), (0,−5)(0, -5).

Solved Geometric Problems and Constructions

  • Determining Unknown Vertices of Rectangles:

    • Given Coordinates: A rectangle possesses three specified vertices: A(3,6)A(3, 6), B(3,2)B(3, 2), and C(8,2)C(8, 2).

    • Geometric Construction: Plot points AA, BB, and CC on graph paper. Form segments ABAB (vertical segment of length 44 units along x=3x = 3) and BCBC (horizontal segment of length 55 units along y=2y = 2).

    • Determining Vertex DD: Since opposite sides in a rectangle are parallel and congruent, segment CDCD must extend vertically from C(8,2)C(8, 2) parallel to ABAB by a length of 44 units, reaching y=6y = 6. Concurrently, segment ADAD extends horizontally from A(3,6)A(3, 6) by a length of 55 units, reaching x=8x = 8.

    • Result: Vertex DD has coordinates (8,6)(8, 6).

  • Point Evaluation from Simultaneous Algebraic Relations:

    • Condition: Identify the point whose abscissa satisfies 0.5x−3=−0.25x0.5x - 3 = -0.25x and whose ordinate satisfies 8−0.2(y+3)=3y+18 - 0.2(y + 3) = 3y + 1.

    • Abscissa Derivation:

      • 0.5x−3=−0.25x0.5x - 3 = -0.25x

      • 0.5x+0.25x=30.5x + 0.25x = 3

      • 0.75x=30.75x = 3

      • x=30.75=3×10075=30075=4x = \frac{3}{0.75} = \frac{3 \times 100}{75} = \frac{300}{75} = 4

    • Ordinate Derivation:

      • 8−0.2(y+3)=3y+18 - 0.2(y + 3) = 3y + 1

      • 8−0.2y−0.6=3y+18 - 0.2y - 0.6 = 3y + 1

      • 7.4−0.2y=3y+17.4 - 0.2y = 3y + 1

      • −0.2y−3y=1−7.4-0.2y - 3y = 1 - 7.4

      • −3.2y=−6.4-3.2y = -6.4

      • y=−6.4−3.2=2y = \frac{-6.4}{-3.2} = 2

    • Resulting Point Coordinates: (4,2)(4, 2)

Exercise 26(A): Comprehensive Problem Set

  • Problem 1: Variable Identification: Classify the dependent and independent variables for each given equation:

    • (i) y=43x−7y = \frac{4}{3}x - 7: Dependent variable = yy; Independent variable = xx.

    • (ii) x=9y+4x = 9y + 4: Dependent variable = xx; Independent variable = yy.

    • (iii) x=5y+32x = \frac{5y + 3}{2}: Dependent variable = xx; Independent variable = yy.

    • (iv) y=17(6x+5)y = \frac{1}{7}(6x + 5): Dependent variable = yy; Independent variable = xx.

  • Problem 2: Point Plotting: Graph the following coordinate points on a single grid:

    • (i) (8,7)(8, 7)

    • (ii) (3,6)(3, 6)

    • (iii) (0,4)(0, 4)

    • (iv) (0,−4)(0, -4)

    • (v) (3,−2)(3, -2)

    • (vi) (−2,5)(-2, 5)

    • (vii) (−3,0)(-3, 0)

    • (viii) (5,0)(5, 0)

    • (ix) (−4,−3)(-4, -3)

  • Problem 3: Component Equalities: Solve for the variables xx and yy:

    • (i) (x−1,y+3)=(4,4)(x - 1, y + 3) = (4, 4)

      • x−1=4  ⟹  x=5x - 1 = 4 \implies x = 5

      • y+3=4  ⟹  y=1y + 3 = 4 \implies y = 1

    • (ii) (3x+1,2y−7)=(9,−9)(3x + 1, 2y - 7) = (9, -9)

      • 3x+1=9  ⟹  3x=8  ⟹  x=833x + 1 = 9 \implies 3x = 8 \implies x = \frac{8}{3}

      • 2y−7=−9  ⟹  2y=−2  ⟹  y=−12y - 7 = -9 \implies 2y = -2 \implies y = -1

    • (iii) (5x−3y,y−3x)=(4,4)(5x - 3y, y - 3x) = (4, 4)

      • Equation A: 5x−3y=45x - 3y = 4

      • Equation B: y−3x=4  ⟹  y=3x+4y - 3x = 4 \implies y = 3x + 4

      • Substitute: 5x−3(3x+4)=4  ⟹  5x−9x−12=4  ⟹  −4x=16  ⟹  x=−45x - 3(3x + 4) = 4 \implies 5x - 9x - 12 = 4 \implies -4x = 16 \implies x = -4

      • Evaluate yy: y=3(−4)+4=−12+4=−8y = 3(-4) + 4 = -12 + 4 = -8

  • Problem 4: Graphical Point Extraction: Identify specific labeled points on the Cartesian reference plane satisfying the following criteria:

    • (i) The abscissa is 22.

    • (ii) The ordinate is 00.

    • (iii) The ordinate is 33.

    • (iv) The ordinate is −4-4.

    • (v) The abscissa is 55.

    • (vi) The abscissa is equal to the ordinate (x=yx = y).

    • (vii) The ordinate is half of the abscissa (y=12xy = \frac{1}{2}x).

  • Problem 5: Conceptual True or False Analysis:

    • (i) The ordinate of a point is its xx-co-ordinate. -> False (the ordinate is the yy-co-ordinate; the abscissa is the xx-co-ordinate).

    • (ii) The origin is in the first quadrant. -> False (the origin lies concurrently on both axes and does not belong to any quadrant).

    • (iii) The yy-axis is the vertical number line. -> True.

    • (iv) Every point is located in one of the four quadrants. -> False (points situated on the axes are not located within any quadrant).

    • (v) If the ordinate of a point is equal to its abscissa; the point lies either in the first quadrant or in the second quadrant. -> False (if x=yx = y, both are positive in the first quadrant or both are negative in the third quadrant).

    • (vi) The origin (0,0)(0, 0) lies on the xx-axis. -> True (its ordinate is 00).

    • (vii) The point (a,b)(a, b) lies on the yy-axis if b = 0$.* -> False (it lies on the y−axisifitsabscissa-axis if its abscissaa = 0;if; ifb = 0,itliesonthe, it lies on thex-axis).\n* **Problem 6: Points Defined by Independent Algebraic Equations:**\n * (i) Solve 3 - 2x = 7forabscissaandfor abscissa and2y + 1 = 10 for ordinate:\n * -2x = 4 \implies x = -2\n * 2y = 9 \implies y = 4.5\n * Coordinates: (-2, 4.5)\n * (ii) Solve the proportional linear system for a(abscissa)and(abscissa) andb (ordinate):\n * 2a - \frac{a - 1}{2} = \frac{15 - 4b}{7} = \frac{2b - 1}{3}\n * Abscissa from a::\frac{4a - a + 1}{2} = \frac{3a + 1}{2}\n * From \frac{15 - 4b}{7} = \frac{2b - 1}{3}::3(15 - 4b) = 7(2b - 1) \implies 45 - 12b = 14b - 7 \implies 52 = 26b \implies b = 2\n * Equate to resolve a::\frac{3a + 1}{2} = \frac{2(2) - 1}{3} = \frac{3}{3} = 1 \implies 3a + 1 = 2 \implies 3a = 1 \implies a = \frac{1}{3}\n * Coordinates: (\frac{1}{3}, 2)\n * (iii) Solve for abscissa and ordinate:\n * 5x - (5 - x) = \frac{1}{2}(3 - x)\n * 5x - 5 + x = \frac{3 - x}{2} \implies 2(6x - 5) = 3 - x \implies 12x - 10 = 3 - x \implies 13x = 13 \implies x = 1\n * 4 - 3y = \frac{4 + y}{3} \implies 3(4 - 3y) = 4 + y \implies 12 - 9y = 4 + y \implies 8 = 10y \implies y = \frac{8}{10} = \frac{4}{5}\n * Coordinates: (1, \frac{4}{5})\n* **Problem 7: Missing Rectangle Vertices:** Plot the three known points and determine the coordinates of the fourth vertex D:\n * (i) A(2, 0),,B(8, 0),,C(8, 4)−>Fourthvertex-> Fourth vertexD(2, 4)\n * (ii) A(4, 2),,B(-2, 2),,D(4, -2)−>Fourthvertex-> Fourth vertexC(-2, -2)\n * (iii) A(4, 6),,C(6, 0),,D(-4, 0)(Note:side(Note: sideCDliesonthelies on thex−axisfrom-axis fromx = -4totox = 6,length=, length =10;verticalheightof; vertical height ofAisis6)−>Fourthvertex) -> Fourth vertexB(6, 6)\n * (iv) B(10, 4),,C(0, 4),,D(0, -2)−>Fourthvertex-> Fourth vertexA(10, -2)\n* **Problem 8: Parallelogram Geometry:**\n * Given vertices: A(2, 2),,B(8, 2),and, andC(4, 4).\n * *Coordinate of vertex D:∗Basesegment:* Base segmentABrunshorizontallyfromruns horizontally fromx = 2totox = 8(length(length= 6).Side). SideCDmustrunparalleltomust run parallel toABhorizontallyathorizontally aty = 4.Movingfrom. Moving fromC(4, 4)alongnegativealong negativexbyby6unitsgivesunits givesD(-2, 4).\n * *Mid-point of AB:∗:*\left(\frac{2 + 8}{2}, \frac{2 + 2}{2}\right) = (5, 2)\n * *Mid-point of CD:∗:*\left(\frac{4 + (-2)}{2}, \frac{4 + 4}{2}\right) = (1, 4)\n* **Problem 9: Square Analysis:**\n * Given vertices of square ABCD::A(2, 4),,C(4, 10),and, andD(-2, 10).\n * *Vertex B:∗Horizontalsegment:* Horizontal segmentDCrunsfromruns from(-2, 10)toto(4, 10)(length(length= 6).Segment). SegmentABmustrunfrommust run fromA(2, 4)paralleltoparallel toDCbylengthby length6,giving, givingB(8, 4).\n * *(i) Mid-point of BC:∗Coordinatesare:* Coordinates are\left(\frac{8 + 4}{2}, \frac{4 + 10}{2}\right) = (6, 7)\n * *(ii) Mid-point of CD:∗Coordinatesare:* Coordinates are\left(\frac{4 + (-2)}{2}, \frac{10 + 10}{2}\right) = (1, 10)\n * *(iii) Intersection of Diagonals:* The center equals the midpoint of diagonal AC::\left(\frac{2 + 4}{2}, \frac{4 + 10}{2}\right) = (3, 7)\n* **Problem 10: Collinearity Tests:** Plot on grid and determine if points fall on a single unbroken line:\n * (i) (3, 5),,(1, 1),and, and(0, -1)−>Collinear(alllieon-> Collinear (all lie ony = 2x - 1).\n * (ii) (-2, -1),,(1, 4),and, and(-4, 1) -> Not collinear.\n* **Problem 11: Projections onto Axes:**\n * Plot A(5, -7).\n * Drop perpendicular AMontoontox−axis:Foot-axis: FootMhascoordinateshas coordinates(5, 0).\n * Drop perpendicular ANontoontoy−axis:Foot-axis: FootNhascoordinateshas coordinates(0, -7).\n* **Problem 12: Square Dimensions and Area:**\n * Vertices of square ABCD::A(3, 4),,B(-2, 4),and, andC(-2, -1).\n * *Vertex D:∗Extendshorizontallyfrom:* Extends horizontally fromC(-2, -1)toalignunderto align underA(3, 4),yieldingcoordinates, yielding coordinatesD(3, -1).\n * *Side Length:* Distance between A(3, 4)andandB(-2, 4)isis3 - (-2) = 5 units.\n * *Area of Square:* \text{Side}^2 = 5^2 = 25\text{ sq. units}.\n* **Problem 13: Geometric Properties of Rectangle OABC:**\n * Vertex Oistheoriginis the origin(0, 0).\n * OA = 10unitsalongthepositiveunits along the positivex−axis:Coordinatesof-axis: Coordinates ofA = (10, 0).\n * Width AB = 8unitsperpendiculartounits perpendicular toOA:Coordinatesof: Coordinates ofB = (10, 8).\n * Side OCextendsalongthepositiveextends along the positivey−axisby-axis by8units:Coordinatesofunits: Coordinates ofC = (0, 8).\n\n# Graphs of Constant and Axis-Parallel Lines\n\n* **The Equation x = 0:**\n * Represents the analytical equation of the y-axis.\n * For every point situated upon the vertical y−axis,theabscissaisidenticallyzero(-axis, the abscissa is identically zero (x = 0).\n * Examples: (0, 7),,(0, 0),,(0, -8),,(0, 15).\n* **The Family of Equations x = a:**\n * Represents a straight line running strictly parallel to the vertical y−axisataninvariantperpendiculardistanceof-axis at an invariant perpendicular distance of|a| units from it.\n * If a > 0,thelineliestotherightofthe, the line lies to the right of they-axis.\n * If a < 0,thelineliestotheleftofthe, the line lies to the left of they-axis.\n * *Demonstrative Lines:*\n * Line ABlocatedlocated5unitstotheleft:units to the left:x = -5 \implies x + 5 = 0\n * Line CDlocatedlocated2unitstotheleft:units to the left:x = -2 \implies x + 2 = 0\n * Line EFlocatedlocated3unitstotheright:units to the right:x = 3\n * Line GHlocatedlocated6unitstotheright:units to the right:x = 6\n* **The Equation y = 0:**\n * Represents the analytical equation of the x-axis.\n * For every point situated upon the horizontal x−axis,theordinateisidenticallyzero(-axis, the ordinate is identically zero (y = 0).\n * Examples: (8, 0),,(0, 0),,(-7, 0),,(15, 0).\n* **The Family of Equations y = a:**\n * Represents a straight line running strictly parallel to the horizontal x−axisataninvariantperpendiculardistanceof-axis at an invariant perpendicular distance of|a| units from it.\n * If a > 0,thelineliesabovethe, the line lies above thex-axis.\n * If a < 0,thelineliesbelowthe, the line lies below thex-axis.\n * *Demonstrative Lines:*\n * Line ABlocatedlocated6unitsabove:units above:y = 6\n * Line CDlocatedlocated3unitsabove:units above:y = 3\n * Line EFlocatedlocated4unitsbelow:units below:y = -4 \implies y + 4 = 0\n* **Worked Demonstration: Constant Graphs:**\n * (i) y = 3:Lineparallelto: Line parallel tox−axisatadistanceof-axis at a distance of3 units above it.\n * (ii) y + 5 = 0 \implies y = -5:Lineparallelto: Line parallel tox−axisatadistanceof-axis at a distance of5 units below it.\n * (iii) x = 4:Lineparallelto: Line parallel toy−axisatadistanceof-axis at a distance of4 units to the right of it.\n * (iv) x + 6 = 0 \implies x = -6:Lineparallelto: Line parallel toy−axisatadistanceof-axis at a distance of6 units to the left of it.\n\n# Graphing Linear Equations\n\n* **Definition of Linear Equation:** Any algebraic equation whose resulting locus on a Cartesian coordinate plane forms an unbroken straight line is defined as a linear equation.\n* **Standard Plotting Methodology:**\n * *Step 1:* Reorganize the equation to establish one variable explicitly as a function of the other.\n * *Step 2:* Calculate at least three distinct coordinate pairs (x, y) satisfying the equation to prevent undetected computational errors.\n * *Step 3:* Tabulate these coordinate pairs.\n * *Step 4:* Plot the evaluated points upon a calibrated Cartesian plane.\n * *Step 5:* Rule an extended continuous straight line through the plotted points.\n* **Type 1: Proportional Systems (y = mx):**\n * Equations of this form lack a constant term (c = 0)andinvariablypassdirectlythroughtheorigin) and invariably pass directly through the origin(0, 0).\n * *Worked Demonstration: Graph of y = -2x:*\n * For x = 0 \implies y = -2(0) = 0\n * For x = 3 \implies y = -2(3) = -6\n * For x = -2 \implies y = -2(-2) = 4\n * *Tabulated Values:*\n\n| x∣|0∣|3∣|-2 |\n| :--- | :--- | :--- | :--- |\n| y∣|0∣|-6∣|4 |\n\n* **Type 2: General Systems (y = mx + cwherewherec eq 0):**\n* The constant c displaces the line away from the origin along the vertical axis.\n* *Worked Demonstration: Graph of y = 3x - 4:*\n * For x = 1 \implies y = 3(1) - 4 = -1\n * For x = 3 \implies y = 3(3) - 4 = 5\n * For x = 0 \implies y = 3(0) - 4 = -4\n * *Tabulated Values:*\n\n| x∣|1∣|3∣|0 |\n| :--- | :--- | :--- | :--- |\n| y∣|-1∣|5∣|-4 |\n\n* *Worked Demonstration: Graph of y = -2x + \frac{3}{2}:*\n * For x = 2 \implies y = -2(2) + \frac{3}{2} = -4 + 1.5 = -2.5 = -\frac{5}{2}\n * For x = -1 \implies y = -2(-1) + \frac{3}{2} = 2 + 1.5 = 3.5 = \frac{7}{2}\n * For x = 0 \implies y = -2(0) + \frac{3}{2} = \frac{3}{2}\n * *Tabulated Values:*\n\n| x∣|2∣|-1∣|0 |\n| :--- | :--- | :--- | :--- |\n| y∣|-\frac{5}{2}∣|\frac{7}{2}∣|\frac{3}{2} |\n\n* **Extracting Graphical Solutions: Line 3x + 2y - 5 = 0:**\n * *Formulation:* Express yassubject:as subject:2y = -3x + 5 \implies y = \frac{-3x + 5}{2}\n * *Coordinate Derivations:*\n * x = 1 \implies y = \frac{-3(1) + 5}{2} = 1\n * x = 5 \implies y = \frac{-3(5) + 5}{2} = -5\n * x = -1 \implies y = \frac{-3(-1) + 5}{2} = 4\n * *Tabulated Values:*\n\n| x∣|1∣|5∣|-1 |\n| :--- | :--- | :--- | :--- |\n| y∣|1∣|-5∣|4 |\n\n* *Graphical Queries:*\n * *(i) Find x_1whenwheny = 7$: Locate y=7y = 7 on the vertical axis; project horizontally to intercept the line at point CC; drop vertically to the horizontal axis to read the coordinate. Reading: x1=−3x_1 = -3.

    • *(ii) Find y1y_1 when x = 3$:* Locate x = 3onthehorizontalaxis;projectverticallytointerceptthelineatpointon the horizontal axis; project vertically to intercept the line at pointD;projecthorizontallytotheverticalaxistoreadthecoordinate.Reading:; project horizontally to the vertical axis to read the coordinate. Reading:y_1 = -2.\n\n# Exercise 26(B): Linear Graphs and Geometric Applications\n\n* **Problem 1: Axis-Parallel Graphing:** Construct graphs for each of the following single-variable linear equations:\n * (i) x = 3\n * (ii) x + 3 = 0 \implies x = -3\n * (iii) x - 5 = 0 \implies x = 5\n * (iv) 2x - 7 = 0 \implies x = 3.5\n * (v) y = 4\n * (vi) y + 6 = 0 \implies y = -6\n * (vii) y - 2 = 0 \implies y = 2\n * (viii) 3y + 5 = 0 \implies y = -\frac{5}{3}\n * (ix) 2y - 5 = 0 \implies y = 2.5\n * (x) y = 0 (horizontal axis)\n * (xi) x = 0 (vertical axis)\n* **Problem 2: Origin-Passing Graphs (y = mx):** Construct graphs for:\n * (i) y = 3x\n * (ii) y = -x\n * (iii) y = -2x\n * (iv) y = x\n * (v) 5x + y = 0 \implies y = -5x\n * (vi) x + 2y = 0 \implies y = -0.5x\n * (vii) 4x - y = 0 \implies y = 4x\n * (viii) 3x + 2y = 0 \implies y = -1.5x\n * (ix) x = -2y \implies y = -0.5x\n* **Problem 3: General Linear Equation Graphs:** Construct graphs for:\n * (i) y = 2x + 3\n * (ii) y = \frac{2}{3}x - 1\n * (iii) y = -x + 4\n * (iv) y = 4x - \frac{5}{2}\n * (v) y = \frac{3}{2}x + 1\n * (vi) 2x - 3y = 4 \implies y = \frac{2x - 4}{3}\n * (vii) \frac{x - 1}{3} - \frac{y + 2}{2} = 0 \implies 2(x - 1) = 3(y + 2) \implies 2x - 2 = 3y + 6 \implies y = \frac{2x - 8}{3}\n * (viii) x - 3 = \frac{2}{5}(y + 1) \implies 5x - 15 = 2y + 2 \implies y = \frac{5x - 17}{2}\n * (ix) x + 5y + 2 = 0 \implies y = \frac{-x - 2}{5}\n* **Problem 4: Intercept Determination:** Construct graphs and evaluate axes intercept points:\n * (i) 3x + 2y = 6:\n * At y = 0 \implies x = 2.Coordinates:. Coordinates:(2, 0)\n * At x = 0 \implies y = 3.Coordinates:. Coordinates:(0, 3)\n * (ii) 2x - 5y = 10:\n * At y = 0 \implies x = 5.Coordinates:. Coordinates:(5, 0)\n * At x = 0 \implies y = -2.Coordinates:. Coordinates:(0, -2)\n * (iii) \frac{1}{2}x + \frac{1}{3}y = 5:\n * At y = 0 \implies x = 10.Coordinates:. Coordinates:(10, 0)\n * At x = 0 \implies y = 15.Coordinates:. Coordinates:(0, 15)\n * (iv) \frac{2x - 1}{5} - \frac{2 - y}{2} = 0:\n * 2(2x - 1) - 5(2 - y) = 0 \implies 4x - 2 - 10 + 5y = 0 \implies 4x + 5y = 12\n * At y = 0 \implies 4x = 12 \implies x = 3.Coordinates:. Coordinates:(3, 0)\n * At x = 0 \implies 5y = 12 \implies y = 2.4.Coordinates:. Coordinates:(0, 2.4)\n* **Problem 5: Area Enclosed by Graph and Axes:**\n * (i) 3x - (5 - y) = 7 \implies 3x - 5 + y = 7 \implies 3x + y = 12:\n * x−intercept:-intercept:y = 0 \implies 3x = 12 \implies x = 4\n * y−intercept:-intercept:x = 0 \implies y = 12\n * \text{Area} = \frac{1}{2} \times \text{base} \times \text{height} = \frac{1}{2} \times 4 \times 12 = 24\text{ sq. units}\n * (ii) 7 - 3(1 - y) = -5 + 2x \implies 7 - 3 + 3y = -5 + 2x \implies 4 + 3y = -5 + 2x \implies 2x - 3y = 9:\n * x−intercept:-intercept:y = 0 \implies 2x = 9 \implies x = 4.5\n * y−intercept:-intercept:x = 0 \implies -3y = 9 \implies y = -3\n * \text{Area} = \frac{1}{2} \times |4.5| \times |-3| = \frac{1}{2} \times 4.5 \times 3 = 6.75\text{ sq. units}\n* **Problem 6: Geometric Orientation of Pairs of Lines:** Graph each pair and determine whether they are parallel or perpendicular:\n * (i) y = 3x - 1andandy = 3x + 2:Parallel(slopesareidentical,: Parallel (slopes are identical,m_1 = m_2 = 3).\n * (ii) y = x - 3andandy = -x + 5:Perpendicular(slopessatisfy: Perpendicular (slopes satisfym_1 \times m_2 = 1 \times (-1) = -1).\n * (iii) 2x - 3y = 6((y = \frac{2}{3}x - 2)and) and\frac{x}{2} + \frac{y}{3} = 1((y = -\frac{3}{2}x + 3):Perpendicular(): Perpendicular (m_1 \times m_2 = \frac{2}{3} \times -\frac{3}{2} = -1).\n * (iv) 3x + 4y = 24((y = -\frac{3}{4}x + 6)and) and\frac{x}{3} - \frac{y}{4} = 1((y = \frac{4}{3}x - 4):Perpendicular(): Perpendicular (m_1 \times m_2 = -\frac{3}{4} \times \frac{4}{3} = -1).\n* **Problem 7: Multi-Line Plotting on Fixed Domain:** Plot the graphs of y = x - 2,,y = 2x + 1,and, andy = 4onthesamegridacrossthedomainon the same grid across the domainx = -4totox = 3.\n* **Problem 8: Parallel Trajectories:** Plot y = 2x - 1,,y = 2x,and, andy = 2x + 1fromfromx = -2totox = 4. The three lines are strictly parallel to each other.\n* **Problem 9: Graphical Determination of Intercept Points:** Draw 3x + 2y = 6.Interceptwith. Intercept withx−axisis-axis isP(2, 0);interceptwith; intercept withy−axisis-axis isQ(0, 3).\n* **Problem 10: Value Estimation from Graph of x + 2y - 3 = 0:**\n * (i) Determine x_1whenwheny = 3::x_1 + 2(3) - 3 = 0 \implies x_1 = -3.\n * (ii) Determine x_2whenwheny = -2::x_2 + 2(-2) - 3 = 0 \implies x_2 = 7.\n* **Problem 11: Value Estimation from Graph of 3x - 4y = 12:**\n * (i) Determine y_1whenwhenx = 4::3(4) - 4y_1 = 12 \implies 12 - 4y_1 = 12 \implies y_1 = 0.\n * (ii) Determine y_2whenwhenx = 0::3(0) - 4y_2 = 12 \implies -4y_2 = 12 \implies y_2 = -3.\n* **Problem 12: Value Estimation from Graph of \frac{x}{4} + \frac{y}{5} = 1:**\n * (i) Determine x_1whenwheny = 10::\frac{x_1}{4} + \frac{10}{5} = 1 \implies \frac{x_1}{4} + 2 = 1 \implies \frac{x_1}{4} = -1 \implies x_1 = -4.\n * (ii) Determine y_1whenwhenx = 8::\frac{8}{4} + \frac{y_1}{5} = 1 \implies 2 + \frac{y_1}{5} = 1 \implies \frac{y_1}{5} = -1 \implies y_1 = -5.\n* **Problem 13: Concurrent Lines:** Demonstrate graphically that the three lines represented by x + y = 2,,x - 2y = 5,and, and\frac{4}{3}x + y = 0 intersect at a single concurrent point.\n\n# Inclination and Slope of a Straight Line\n\n* **Concept of Inclination:**\n * The angle formed between a straight line and the positive direction of the horizontal x-axis, measured counter-clockwise (anti-clockwise), is defined as the *inclination* of the line.\n * Standard algebraic notation: Represented by the Greek letter \theta (theta).\n * *Characteristic Inclinations:*\n * Acute orientation: e.g., \theta = 45^\circ\n * Obtuse orientation: e.g., \theta = 120^\circ,,\theta = 130^\circ\n* **Boundary Inclinations:**\n * For the x−axisandalllinesparalleltothe-axis and all lines parallel to thex−axis,theinclinationiszero:-axis, the inclination is zero:\theta = 0^\circ.\n * For the y−axisandalllinesparalleltothe-axis and all lines parallel to they−axis,theinclinationisarightangle:-axis, the inclination is a right angle:\theta = 90^\circ.\n* **Concept of Slope (Gradient):**\n * If \thetarepresentstheinclinationofastraightline,thetrigonometricaltangentofthisangle(represents the inclination of a straight line, the trigonometrical tangent of this angle (\tan(\theta)) defines the *slope* or *gradient* of the line.\n * Standard algebraic notation: Represented by the lower-case letter m.\n * *Fundamental Formula:*\n * \text{Slope} = m = \tan(\theta)\n* **Slopes of Standard Angular Orientations:**\n * For \theta = 30^\circ::m = \tan(30^\circ) = \frac{1}{\sqrt{3}}\n * For \theta = 45^\circ::m = \tan(45^\circ) = 1\n * For \theta = 60^\circ::m = \tan(60^\circ) = \sqrt{3}\n* **Slope Values of the Orthogonal Axes:**\n * *Horizontal Axis and Lines Parallel to x-axis:*\n * \theta = 0^\circ \implies m = \tan(0^\circ) = 0\n * *Vertical Axis and Lines Parallel to y-axis:*\n * \theta = 90^\circ \implies m = \tan(90^\circ) = \infty \text{ (undefined / infinity)}\n\n# The Y-Intercept of a Straight Line\n\n* **Definition:** When a straight line intersects the vertical y−axisatagivencoordinatepoint,thedirectedlineardistancefromtheorigin-axis at a given coordinate point, the directed linear distance from the originOtothatintersectionpointisdesignatedasthe∗to that intersection point is designated as the *y-intercept*.\n* **Standard Algebraic Notation:** Commonly denoted by the letter c.\n* **Sign and Magnitude Conventions:**\n * The intercept is positive (c > 0)iftheintersectionpointliesabovetheoriginalongthepositive) if the intersection point lies above the origin along the positivey−axis(e.g.,-axis (e.g.,c = 5).\n * The intercept is negative (c < 0)iftheintersectionpointliesbelowtheoriginalongthenegative) if the intersection point lies below the origin along the negativey−axis(e.g.,-axis (e.g.,c = -8).\n* **Boundary Conditions for Intercepts:**\n * For the x−axisitself,-axis itself,y\text{-intercept} = 0.\n * For every line parallel to the vertical y−axis,-axis,y\text{-intercept} = 0.\n\n# Determination of Slope and Y-Intercept from General Equations\n\n* **Algebraic Derivation Procedure:**\n * *Step 1:* Begin with the general standard form of a linear equation: ax + by + c = 0.\n * *Step 2:* Algebraically isolate the variable y to establish it as the subject:\n * ax + by + c = 0\n * by = -ax - c\n * y = \left(-\frac{a}{b}\right)x - \frac{c}{b}\n * *Step 3:* The resulting coefficient of xprovidestheslopeprovides the slopem,whiletheterminalconstanttermyieldsthe, while the terminal constant term yields they−intercept-interceptc:\n * \text{Slope } (m) = -\frac{a}{b}\n * y\text{-intercept } (c) = -\frac{c}{b}\n* **Worked Demonstration: Evaluation of Slope and Intercept:**\n * *Equation 1:* 2x - 3y + 5 = 0\n * -3y = -2x - 5\n * 3y = 2x + 5\n * y = \frac{2}{3}x + \frac{5}{3}\n * \text{Slope } (m) = \frac{2}{3}\n * y\text{-intercept } (c) = \frac{5}{3}\n * *Equation 2:* 2y + 5x = 7\n * 2y = -5x + 7\n * y = -\frac{5}{2}x + \frac{7}{2}\n * \text{Slope } (m) = -\frac{5}{2}\n * y\text{-intercept } (c) = \frac{7}{2}\n * *Equation 3:* 2y - 5 = 0\n * 2y = 5\n * y = 0 \times x + \frac{5}{2}\n * \text{Slope } (m) = 0\n * y\text{-intercept } (c) = \frac{5}{2}\n\n# Equation of a Line Using Slope-Intercept Form\n\n* **Bidirectional Property of Slope-Intercept Form:**\n * Whenever any linear equation is reduced to the explicit format y = mx + c,theslopeequalsthecoefficient, the slope equals the coefficientmandtheverticalinterceptequalsthescalarand the vertical intercept equals the scalarc.\n * Conversely, if the slope mandandy−intercept-interceptcofalineareknown,itsexplicitCartesianequationisdefinedbyof a line are known, its explicit Cartesian equation is defined byy = mx + c.\n* **Worked Demonstration: Equation Synthesis:**\n * *Case 1:* Determine the equation of a line with slope = -3andandy−intercept-intercept= 5:\n * Here, m = -3andandc = 5\n * y = mx + c \implies y = -3x + 5\n * Standardized form: 3x + y = 5\n * *Case 2:* Determine the equation of a line with m = 8andandc = -6:\n * y = mx + c \implies y = 8x - 6\n * Standardized form: 8x - y - 6 = 0\n\n# Exercise 26(C): Inclination, Slope, and Intercept Problems\n\n* **Problem 1: Graphical Inclination:** Read and record the inclination angle \thetaoflineof lineAB from given geometric diagrams.\n* **Problem 2: Geometric Configurations and Inclination:** State the inclination \theta for lines satisfying the following alignments:\n * (i) Parallel to the x−axis:-axis:\theta = 0^\circ\n * (ii) Perpendicular to the x−axis:-axis:\theta = 90^\circ\n * (iii) Parallel to the y−axis:-axis:\theta = 90^\circ\n * (iv) Perpendicular to the y−axis:-axis:\theta = 0^\circ\n* **Problem 3: Slope Determination from Inclination:** Evaluate the slope m = \tan(\theta) for:\n * (i) \theta = 0^\circ \implies m = \tan(0^\circ) = 0\n * (ii) \theta = 30^\circ \implies m = \tan(30^\circ) = \frac{1}{\sqrt{3}}\n * (iii) \theta = 45^\circ \implies m = \tan(45^\circ) = 1\n * (iv) \theta = 60^\circ \implies m = \tan(60^\circ) = \sqrt{3}\n* **Problem 4: Inclination from Slope:** Evaluate the inclination \thetagivengivenm:\n * (i) m = 0 \implies \tan(\theta) = 0 = \tan(0^\circ) \implies \theta = 0^\circ\n * (ii) m = 1 \implies \tan(\theta) = 1 = \tan(45^\circ) \implies \theta = 45^\circ\n * (iii) m = \sqrt{3} \implies \tan(\theta) = \sqrt{3} = \tan(60^\circ) \implies \theta = 60^\circ\n * (iv) m = \frac{1}{\sqrt{3}} \implies \tan(\theta) = \frac{1}{\sqrt{3}} = \tan(30^\circ) \implies \theta = 30^\circ\n* **Problem 5: Slopes of Geometric Axes and Parallels:** State the slope m for lines:\n * (i) Parallel to x−axis:-axis:m = 0\n * (ii) Perpendicular to x−axis:-axis:m = \infty (undefined)\n * (iii) Parallel to y−axis:-axis:m = \infty (undefined)\n * (iv) Perpendicular to y−axis:-axis:m = 0\n* **Problem 6: Calculation of mandandc from Equations:**\n * (i) x + 3y + 5 = 0 \implies 3y = -x - 5 \implies y = -\frac{1}{3}x - \frac{5}{3}\n * \text{Slope } (m) = -\frac{1}{3},,y\text{-intercept } (c) = -\frac{5}{3}\n * (ii) 3x - y - 8 = 0 \implies y = 3x - 8\n * \text{Slope } (m) = 3,,y\text{-intercept } (c) = -8\n * (iii) 5x = 4y + 7 \implies 4y = 5x - 7 \implies y = \frac{5}{4}x - \frac{7}{4}\n * \text{Slope } (m) = \frac{5}{4},,y\text{-intercept } (c) = -\frac{7}{4}\n * (iv) x = 5y - 4 \implies 5y = x + 4 \implies y = \frac{1}{5}x + \frac{4}{5}\n * \text{Slope } (m) = \frac{1}{5},,y\text{-intercept } (c) = \frac{4}{5}\n * (v) y = 7x - 2\n * \text{Slope } (m) = 7,,y\text{-intercept } (c) = -2\n * (vi) 3y = 7 \implies y = 0 \times x + \frac{7}{3}\n * \text{Slope } (m) = 0,,y\text{-intercept } (c) = \frac{7}{3}\n * (vii) 4y + 9 = 0 \implies 4y = -9 \implies y = 0 \times x - \frac{9}{4}\n * \text{Slope } (m) = 0,,y\text{-intercept } (c) = -\frac{9}{4}\n* **Problem 7: Constructing Linear Equations from mandandc:**\n * (i) Slope = 2,,y−intercept-intercept= 3::y = 2x + 3\n * (ii) Slope = 5,,y−intercept-intercept= -8::y = 5x - 8\n * (iii) Slope = 4,,y−intercept-intercept= 2::y = 4x + 2\n * (iv) Slope = 3,,y−intercept-intercept= -1::y = 3x - 1\n * (v) Slope = 0,,y−intercept-intercept= -5::y = 0x - 5 \implies y = -5\n * (vi) Slope = 0,,y−intercept-intercept= 0::y = 0x + 0 \implies y = 0\n* **Problem 8: Intercept Measurement of 3x + 4y = 12:∗∗Drawthegraphongridpaper.Identifythepointwherethelineintersectstheverticalaxis;readtheverticalcoordinate.The:** Draw the graph on grid paper. Identify the point where the line intersects the vertical axis; read the vertical coordinate. They−interceptis-intercept is3(atpoint(at point(0, 3)).\n* **Problem 9: Intercept Measurement of 2x - 3y - 18 = 0:∗∗Plotongridpaper.Readtheintersectionalongtheverticalaxis::** Plot on grid paper. Read the intersection along the vertical axis:3y = 2x - 18 \implies y = \frac{2}{3}x - 6.The. They−interceptis-intercept is-6(atpoint(at point(0, -6)).\n* **Problem 10: Determination of Inclination and Intercept of x + y = 5:∗∗Drawthelineonagraphgrid(:** Draw the line on a graph grid (y = -x + 5):\n * Read the vertical intersection: y\text{-intercept } (c) = 5.\n * Evaluate the slope: m = -1.\n * Since \tan(\theta) = -1,theinclinationmeasuredanti−clockwisefromthepositive, the inclination measured anti-clockwise from the positivex−axisis-axis is\theta = 135^\circ$$.