Chemical Formulas, Reactions, and Stoichiometry
Chemical Formulas and Molecular Representations
Empirical Formula Definition:
Represents the simplest, lowest whole-number ratio of atoms of each element present in a chemical compound.
Determined directly from elemental analysis and mass compositions.
Molecular Formula Definition:
Represents the exact number of atoms of each constituent element present in the smallest discrete unit (molecule) of a substance.
May be identical to the empirical formula or an integer multiple of it: .
Structural Formula Definition:
Specifies the exact bonding order, showing how atoms are chemically connected to one another within the molecule.
Three-Dimensional (3-D) Structure Definition:
Displays the spatial arrangement and geometry of atoms and bonds in three dimensions.
Comparison of Empirical and Molecular Formulas:
Water: Molecular formula is ; empirical formula is (ratio is already in lowest terms, ).
Glucose: Molecular formula is ; dividing all subscripts by the greatest common divisor () yields the empirical formula .
Ozone: Molecular formula is ; empirical formula is .
Hydrazine: Molecular formula is ; dividing subscripts by yields the empirical formula .
Distinct Compounds Sharing the Same Empirical Formula ():
: Formaldehyde (), molar mass .
: Acetic acid (), molar mass .
: Lactic acid (), molar mass .
: Glucose (), molar mass .

Percent Composition and Empirical Formula Determination
Percent Composition by Mass:
The percentage by mass contributed by each element to the total mass of a compound:
Sample mass calculation example: A sample containing and :
Determining Percent Composition from Formula Mass:
For a known chemical formula, percent composition is calculated from constituent atomic masses and total formula mass:
Example using ammonia (), with a formula mass of :
Procedure for Determining Empirical Formulas from Element Masses:
Step 1: Convert the mass of each element to moles by dividing by its respective molar mass:
Step 2: Divide the molar amount of each element by the smallest number of moles obtained to establish a preliminary mole ratio.
Step 3: If the resulting ratios are not integers, multiply all ratios by the smallest integer that converts all fractional subscripts into whole numbers.

Worked Example (Elemental Masses: Carbon and Hydrogen):
A compound sample contains and .
Molar conversion:
Mole ratio determination:
The resulting empirical formula is .
Worked Example (Elemental Masses: Chlorine and Oxygen):
A compound contains and .
Molar conversion:
Mole ratio determination:
Converting to whole numbers by multiplying through by :
The resulting empirical formula is .
Procedure for Determining Empirical Formulas from Mass Percent:
Step 1: Assume a sample of the substance, directly converting each mass percentage to an equivalent mass in grams ().
Step 2: Convert the grams of each element into moles using atomic molar masses.
Step 3: Divide all molar values by the lowest molar value.
Step 4: Multiply by an integer if needed to clear fractional values.

Worked Example (Fermentation Gas Empirical Formula):
Bacterial fermentation of grain produces a gas containing and .
Assuming a sample yields and .
Convert to moles:
Divide by the lowest mole quantity ():
The empirical formula is .
Derivation of Molecular Formulas
Relationship Between Empirical and Molecular Formulas:
The molecular formula of a compound is determined from its empirical formula and experimental molecular mass (or molar mass).
The multiplication factor represents the number of empirical formula units per molecule:
Multiplying each subscript in the empirical formula by yields the molecular formula:
Worked Example (Fermentation Gas Molecular Formula):
Empirical formula: .
Empirical formula mass: .
Molar mass of gas: .
Calculating the multiplier :
Molecular formula: .
Chemical Equations and Conservation of Mass
Fundamental Definitions:
Chemical reaction: A process wherein one or more substances (reactants) undergo rearrangement of chemical bonds to form one or more new substances (products).
Chemical equation: A symbolic representation using chemical formulas to illustrate the identities and relative molar/molecular amounts of reactants and products.
Structure of a Balanced Chemical Equation:
Reactants appear on the left side of the reaction arrow (), and products appear on the right side.
Coefficients: Numbers placed directly before chemical formulas indicating the relative number of molecules or moles participating in the reaction.
Subscripts: Numbers embedded within chemical formulas denoting the fixed ratio of atoms chemically bonded within each compound.
Physical State Indicators: Written in parentheses immediately following each substance:
denotes gas.
denotes solid.
denotes liquid.
denotes aqueous solution (species dissolved in water).
Example including physical states:
The Law of Conservation of Mass:
Matter cannot be created or destroyed in an ordinary chemical reaction.
The total number of atoms of each element must remain invariant between reactants and products.
The total mass of the reactants must equal the total mass of the products:
Interpreting Chemical Equations:
Consider the balanced reaction:
Atomic/Molecular Scale: .
Molar Scale: .
Mass Scale: .
Critical Caveat: Coefficients represent moles and molecules, not direct masses in grams ().
Systematic Steps for Balancing Chemical Equations:
Step 1: Write the correct skeletal chemical formulas for all reactants on the left and products on the right.
Step 2: Adjust only the stoichiometric coefficients in front of the formulas. Never modify subscripts, as altering subscripts alters the chemical identity of the substance (e.g., write , never ).
Step 3: Balance elements that appear in only one reactant and one product first.
Step 4: Balance elements that appear in two or more reactants or products (commonly oxygen or hydrogen).
Step 5: Clear any fractional coefficients by multiplying the entire equation by the denominator.
Step 6: Perform a final audit verifying that the count of each atom type is identical on both sides of the equation.
Balancing Example 1 (Synthesis of Aluminum Oxide):
Unbalanced equation:
Balance aluminum: on right requires a coefficient of on the left:
Balance oxygen: Left has ; right has . Multiply by :
Clear fractional coefficients by multiplying every term by :
Verification tally:
Reactants: ; Products: .
Reactants: ; Products: .
Balancing Example 2 (Combustion of Ethane):
Unbalanced equation:
Balance carbon (appears in one reactant and one product): Left has ; right has . Multiply by :
Balance hydrogen (appears in one reactant and one product): Left has ; right has . Multiply by :
Balance oxygen (appears in multiple products): Right side contains . Multiply by :
Clear fractions by multiplying all terms by :
Verification tally:
Carbon: Left has ; Right has .
Hydrogen: Left has ; Right has .
Oxygen: Left has ; Right has .
Classifications of Chemical Reactions
Combination (Synthesis) Reaction:
Two or more substances combine to form a single compound:
Example: Reaction of aluminum metal with elemental bromine to form aluminum bromide:

Decomposition Reaction:
A single compound breaks down into two or more simpler substances:
Example: Thermal decomposition of potassium chlorate yielding potassium chloride and oxygen gas:

Single Displacement (Replacement) Reaction:
One element displaces another element from a compound:
Hydrogen Displacement: Active alkaline earth metal displacing hydrogen from water:
Metal Displacement: More active metal reducing and displacing another metal cation:
Halogen Displacement: A more reactive halogen displacing a halide anion:
Double Displacement (Metathesis) Reaction:
Two compounds exchange ions or partners to produce two entirely new compounds:
Precipitation Reaction: Formation of an insoluble ionic solid from soluble reactants:
Neutralization Reaction (Acid-Base without Gas):
Neutralization Reaction (Acid-Base with Gas Evolution):
Combustion Reaction:
A substance reacts rapidly with oxygen gas (), releasing significant energy as heat and light:
Hydrocarbon Combustion: Hydrocarbon reacting with oxygen to generate carbon dioxide and water:
Elemental Sulfur Combustion: Sulfur burns in oxygen with a characteristic blue flame:

Elemental Magnesium Combustion: Magnesium burns vigorously in oxygen producing an intense, blinding white flame and solid magnesium oxide:

Stoichiometric Calculations and Reaction Quantities
Foundational Principles of Stoichiometry:
Stoichiometry is the quantitative study of relationships among reactants and products in a balanced chemical reaction.
Operates analogously to a recipe where discrete ratios of ingredients yield fixed quantities of products.
Coefficients establish mole ratios (stoichiometric factors) that allow conversion between quantities of any two chemical species involved in a reaction.
Equivalence Across Scales (Ammonia Synthesis):
Reaction:
Molecular Scale Ratio:
Dozen Scale Ratio:
Molar Scale Ratio:
Four-Step Stoichiometric Calculation Workflow:
Step 1: Write and verify the balanced chemical equation.
Step 2: Convert the given quantity of the known substance into moles using its molar mass () or particle count ().
Step 3: Apply the stoichiometric factor (mole ratio) from the balanced equation coefficients to calculate moles of the desired target substance:
Step 4: Convert the calculated moles of the target substance into the requested final units (grams, molecules, or volume).

Questions & Discussion
Question (Saccharin Packet Particle and Atom Calculations):
Prompt: A packet of artificial sweetener contains of saccharin (), which has a molar mass of .
a) How many saccharin molecules are present in the packet?
b) How many carbon atoms are in the same sample?


Solution (Part a):
Convert mass from milligrams to grams:
Convert grams to moles using molar mass, then convert moles to molecules using Avogadro's number ():
Solution (Part b):
Use the chemical formula subscript ():
Question (Pancake Recipe Stoichiometric Proportions):
Prompt: A recipe for making calls for pancake mix, milk, and . Equation: If two dozen () pancakes are needed, how much milk is required?
Solution:
Determine the scale factor based on product yield:
Multiply required milk by the scale factor:
Question (Molecular Formula Determination from Empirical Formula):
Prompt: A compound has an empirical formula of and a molecular mass of . What is the molecular formula?
Solution:
Calculate the empirical formula mass of :
Compute the multiplier ratio :
Multiply empirical subscripts by :
Question (Mole-to-Mole Stoichiometry for Aluminum and Iodine):
Prompt: How many moles of are required to react completely with of according to the following equation?

Solution:
Use the stoichiometric factor derived from the balanced coefficients ():
Question (Mass-to-Mass Reaction of Lithium with Water):
Prompt: Alkali metals react with water to generate hydrogen gas and the corresponding alkali metal hydroxide. For the reaction between lithium and water: How many grams of are needed to produce of ?

Solution:
Step 1: Calculate moles of produced from the given mass ():
Step 2: Relate moles of to moles of using the stoichiometric factor ():
Step 3: Convert moles of to grams using atomic molar mass ():