Basic Mathematics and SI Units for Radiography

Fraction Operations and Principles

  • Definition of Fractions:

    • A fraction represents a part of a whole.
    • Numerator: The top number, indicating the number of selected or identified equal parts.
    • Denominator: The bottom number, indicating the total number of equal parts that constitute the whole.
  • Adding and Subtracting Like Fractions:

    • Applied when fractions possess the same denominator.
    • Procedure:
    1. Add or subtract the numerators while maintaining an unchanged denominator.
    2. Simplify the resulting fraction to lowest terms whenever possible.
    3. If the final fraction is an improper fraction (where the numerator is greater than or equal to the denominator), convert it to a mixed number.
    • Addition Example:
    • 14+24=1+24=34\frac{1}{4} + \frac{2}{4} = \frac{1 + 2}{4} = \frac{3}{4}
    • Subtraction Example:
    • 46−16=4−16=36=12\frac{4}{6} - \frac{1}{6} = \frac{4 - 1}{6} = \frac{3}{6} = \frac{1}{2}
  • Adding and Subtracting Unlike Fractions:

    • Applied when fractions possess different denominators.
    • Procedure:
    1. Find the Least Common Denominator (LCD\text{LCD}) among the fractions.
    2. Convert each fraction into an equivalent fraction that shares the LCD\text{LCD} as its denominator.
    3. Add or subtract the numerators of these equivalent fractions.
    4. Simplify the resulting fraction and convert to a mixed number if applicable.
    • Addition Example:
    • Expression: 25+310\frac{2}{5} + \frac{3}{10}
    • The LCD\text{LCD} of 55 and 1010 is 1010.
    • Convert: 25=410\frac{2}{5} = \frac{4}{10}
    • Sum: 410+310=710\frac{4}{10} + \frac{3}{10} = \frac{7}{10}
    • Subtraction Example:
    • Expression: 56−14\frac{5}{6} - \frac{1}{4}
    • The LCD\text{LCD} of 66 and 44 is 1212.
    • Convert: 56=1012\frac{5}{6} = \frac{10}{12} and 14=312\frac{1}{4} = \frac{3}{12}
    • Subtract: 1012−312=712\frac{10}{12} - \frac{3}{12} = \frac{7}{12}
    • Operational Tips:
    • Always reduce all fractional results to lowest terms.
    • When dealing with mixed numbers, convert them into improper fractions prior to performing addition or subtraction, then convert back to mixed numbers upon completion.
  • Multiplying Fractions:

    • General Formula:
    • ab×cd=a×cb×d\frac{a}{b} \times \frac{c}{d} = \frac{a \times c}{b \times d}
    • Rule: Multiply the numerators together and the denominators together, then simplify the resulting fraction.
    • Standard Multiplication Example:
    • 34×25=3×24×5=620=310\frac{3}{4} \times \frac{2}{5} = \frac{3 \times 2}{4 \times 5} = \frac{6}{20} = \frac{3}{10}
    • Cross-Canceling Technique:
    • Cross-canceling simplifies terms before multiplying by removing common numerical factors shared across numerators and denominators.
    • Example problem: 815×512\frac{8}{15} \times \frac{5}{12}
    • Cancel 88 and 1212 by their common factor of 44 (8→28 \rightarrow 2 and 12→312 \rightarrow 3).
    • Cancel 55 and 1515 by their common factor of 55 (5→15 \rightarrow 1 and 15→315 \rightarrow 3).
    • Compute simplified product: 23×13=29\frac{2}{3} \times \frac{1}{3} = \frac{2}{9}
  • Dividing Fractions:

    • General Formula:
    • \frac{a}{b} \bindiv \frac{c}{d} = \frac{a}{b} \times \frac{d}{c} = \frac{a \times d}{b \times c}
    • Procedure: Rewrite the division problem as a multiplication problem by retaining the first fraction, switching the division sign to multiplication, and inverting the second fraction to its reciprocal (Keep, Change, Flip).
    • Step-by-Step Example:
    • Expression: \frac{3}{4} \bindiv \frac{2}{5}
    • Step 1 (Keep): 34\frac{3}{4}
    • Step 2 (Change): \bindiv \rightarrow \times
    • Step 3 (Flip): 25→52\frac{2}{5} \rightarrow \frac{5}{2}
    • Step 4 (Multiply): 34×52=158=178\frac{3}{4} \times \frac{5}{2} = \frac{15}{8} = 1\frac{7}{8}

Decimal Values, Place Value Architecture, and Conversions

  • Decimal Place Value Architecture:
    • Whole numbers positioned to the left of the decimal point represent positive powers of 1010:
    • Ones: 100=110^0 = 1
    • Tens: 101=1010^1 = 10
    • Hundreds: 102=10010^2 = 100
    • One Thousands: 103=1,00010^3 = 1{,}000
    • Ten Thousands: 104=10,00010^4 = 10{,}000
    • Hundred Thousands: 105=100,00010^5 = 100{,}000
    • One Millions / Millions: 106=1,000,00010^6 = 1{,}000{,}000
    • Fractional values positioned to the right of the decimal point represent negative powers of 1010:
    • Tenths: 0.1=110=10−10.1 = \frac{1}{10} = 10^{-1}
    • Hundredths: 0.01=1100=10−20.01 = \frac{1}{100} = 10^{-2}
    • Thousandths / One-Thousandths: 0.001=11,000=10−30.001 = \frac{1}{1{,}000} = 10^{-3}
    • Ten-Thousandths: 0.0001=110,000=10−40.0001 = \frac{1}{10{,}000} = 10^{-4}
    • Hundred-Thousandths: 0.00001=1100,000=10−50.00001 = \frac{1}{100{,}000} = 10^{-5}
    • Millionths / One-Millionths: 0.000001=11,000,000=10−60.000001 = \frac{1}{1{,}000{,}000} = 10^{-6}
    • Billionths: 0.000000001=11,000,000,000=10−90.000000001 = \frac{1}{1{,}000{,}000{,}000} = 10^{-9}
    • Trillionths: 0.000000000001=11,000,000,000,000=10−120.000000000001 = \frac{1}{1{,}000{,}000{,}000{,}000} = 10^{-12}

Decimal place values for whole numbers and fractional decimals

  • Sample Decimal Place Alignments:

    • Number 1,200,287.091{,}200{,}287.09 spans from Millions down to Hundredths.
    • Number 23,982.98223{,}982.982 spans from Ten Thousands down to Thousandths.
    • Number 245.23245.23 spans from Hundreds down to Hundredths.
  • Adding and Subtracting Decimals:

    • Core Rule: Align the decimal points vertically for each number; append trailing zeros as necessary to equalize decimal lengths.
    • Addition Examples:
    • Example 1: 12.45+3.27=15.7212.45 + 3.27 = 15.72
    • Example 2: 8.60+2.35=10.958.60 + 2.35 = 10.95
    • Subtraction Examples:
    • Example 1: 15.72−3.27=12.4515.72 - 3.27 = 12.45
    • Example 2: 10.95−2.35=8.6010.95 - 2.35 = 8.60
    • Example 3: 25.40−8.75=16.6525.40 - 8.75 = 16.65
  • Multiplying Decimals:

    • Procedure:
    1. Multiply factors together disregarding the decimal points as whole numbers.
    2. Count the sum total of decimal places across all original factors.
    3. Insert the decimal point into the product such that its decimal places match this calculated sum.
    • Worked Example (2.3×4.52.3 \times 4.5):
    • Disregard decimals and multiply: 23×4523 \times 45
      • 23×5=11523 \times 5 = 115
      • 23×40=92023 \times 40 = 920
      • 115+920=1035115 + 920 = 1035
    • Count decimal places:
      • 2.32.3 has 11 decimal place.
      • 4.54.5 has 11 decimal place.
      • Total places required = 1+1=21 + 1 = 2
    • Answer: 10.3510.35
  • Converting Fractions to Decimals:

    • Rule: Divide the numerator by the denominator (\text{Numerator} \bindiv \text{Denominator}).
    • Example 1: \frac{3}{4} \rightarrow 3 \bindiv 4 = 0.75
    • Example 2: \frac{1}{2} \rightarrow 1 \bindiv 2 = 0.5
  • Converting Percents to Decimals:

    • Rule: Shift the decimal point 22 positions to the left and omit the percent sign (%\%).
    • Example 1: 75%→75.→0.7575\% \rightarrow 75. \rightarrow 0.75
    • Example 2: 8%→8.→0.088\% \rightarrow 8. \rightarrow 0.08
    • Example 3: 125%→125.→1.25125\% \rightarrow 125. \rightarrow 1.25

Precision, Significant Digits, and Mathematical Approximations

  • Foundational Concepts of Measurement Reliability:

    • Exact Numbers:
    • Values derived through direct counting or defined mathematical equivalencies; containing zero uncertainty.
    • Rule: Exact numbers never restrict or compromise the precision of calculations.
    • Examples: 12 eggs12\text{ eggs}, 30 students30\text{ students}, 1 ft=12 in1\text{ ft} = 12\text{ in}, or a class having exactly 24 students24\text{ students}.
    • Significant Digits:
    • Numerical digits that convey the actual precision and empirical reliability of a measured value.
    • Rule: The quantity of significant digits indicates measurement confidence.
    • Examples: 12.3012.30 has 44 significant digits; an x-ray tube current of 250.0 mA250.0\,\text{mA} has 44 significant digits.
    • Precision:
    • The degree of closeness and repeatability among multiple independent measurements obtained under identical conditions.
    • Rule: Precise procedures yield closely clustered, mutually consistent results.
    • Examples: Measurements of 10.1 cm10.1\,\text{cm}, 10.2 cm10.2\,\text{cm}, 10.1 cm10.1\,\text{cm}, and 10.2 cm10.2\,\text{cm}; four technologists acquiring nearly identical radiographic exposure outputs.
    • Rounding Off:
    • Eliminating insignificant trailing digits while preserving the magnitude of the approximate value.
    • Rule: Round up by 11 unit if the succeeding digit is 55 or greater; otherwise, truncate downward without modifying the preceding digit.
    • Examples: 12.678→12.712.678 \rightarrow 12.7 (33 significant digits); an exposure time of 0.1267 sec0.1267\,\text{sec} reported as 0.127 sec0.127\,\text{sec}.
  • Decision Framework for Quantities:

    • Question: Is the value counted or defined? →\rightarrow Exact Number.
    • Question: Is the value empirically measured? →\rightarrow Significant Digits.
    • Question: Are repeated readings mutually similar? →\rightarrow Precision.
    • Question: Is the total digit count being deliberately reduced? →\rightarrow Rounding Off.
  • Addition and Subtraction of Approximate Values:

    • Rule: The final sum or difference must be rounded according to the operand possessing the fewest decimal places (decimal positions dictate precision, not the total significant digits). The answer cannot be more precise than the least precise component.
    • Addition Example:
    • Problem: 12.4+3.2712.4 + 3.27
    • Raw calculation: 12.4+3.27=15.6712.4 + 3.27 = 15.67
    • Decimal places: 12.412.4 has 11 decimal place; 3.273.27 has 22 decimal places.
    • Round to 11 decimal place: 15.67≈15.715.67 \thickapprox 15.7
    • Final Answer: 15.715.7
    • Subtraction Example:
    • Problem: 25.48−6.225.48 - 6.2
    • Raw calculation: 25.48−6.2=19.2825.48 - 6.2 = 19.28
    • Decimal places: 25.4825.48 has 22 decimal places; 6.26.2 has 11 decimal place.
    • Round to 11 decimal place: 19.28≈19.319.28 \thickapprox 19.3
    • Final Answer: 19.319.3
  • Multiplication and Division of Approximate Values:

    • Rule: Subject to significant digit constraints. The final product or quotient must contain the exact same count of significant digits as the operand possessing the fewest significant digits.
    • Multiplication Example:
    • Problem: 4.56×2.14.56 \times 2.1
    • Raw calculation: 4.56×2.1=9.5764.56 \times 2.1 = 9.576
    • Significant digits: 4.564.56 has 33 significant digits; 2.12.1 has 22 significant digits.
    • Round to 22 significant digits: 9.576≈9.69.576 \thickapprox 9.6
    • Final Answer: 9.69.6
    • Division Example:
    • Problem: 25.6 \bindiv 4.2
    • Raw calculation: 25.6 \bindiv 4.2 = 6.095
    • Significant digits: 25.625.6 has 33 significant digits; 4.24.2 has 22 significant digits.
    • Round to 22 significant digits: 6.095≈6.16.095 \thickapprox 6.1
    • Final Answer: 6.16.1

Powers of Ten and Scientific Notation

  • Exponential Structure and Rules for Powers of Ten:
    • Exponential expression: ana^n, where a=basea = \text{base} and n=exponentn = \text{exponent}.
    • Base 10 rule: 10^n = 10 \times 10 \times 10 \times \bindots (1010 multiplied by itself nn times).
    • Directional Decimal Shifts:
    • Positive exponent (10+n10^{+n}): Shift the decimal point to the right.
    • Negative exponent (10−n10^{-n}): Shift the decimal point to the left.

Place values correlated with ordinary numbers, decimal fractions, and powers of ten

  • Positive Powers of Ten:

    • 100=110^0 = 1
    • 101=1010^1 = 10
    • 102=10×10=10010^2 = 10 \times 10 = 100
    • 103=10×10×10=1,00010^3 = 10 \times 10 \times 10 = 1{,}000
    • 104=10×10×10×10=10,00010^4 = 10 \times 10 \times 10 \times 10 = 10{,}000
    • 105=10×10×10×10×10=100,00010^5 = 10 \times 10 \times 10 \times 10 \times 10 = 100{,}000
  • Negative Powers of Ten:

    • 10−1=0.110^{-1} = 0.1
    • 10−2=0.0110^{-2} = 0.01
    • 10−3=0.00110^{-3} = 0.001
    • 10−4=0.000110^{-4} = 0.0001
    • 10−5=0.0000110^{-5} = 0.00001
  • Scientific Notation Mechanics:

    • Expresses extremely large or microscopic numbers compactly using powers of ten.
    • Form: a×10na \times 10^n
    • Mandatory conditions: Coefficient aa must satisfy 1 \bindle a < 10, and exponent nn must be an integer.
  • Converting Standard Form to Scientific Notation:

    • Large Number Example (45,00045{,}000):
    • Shift decimal point leftward until only one non-zero digit remains to the left: 45000.→4.545000. \rightarrow 4.5
    • Decimal shifted 44 places left.
    • Result: 45,000=4.5×10445{,}000 = 4.5 \times 10^4
    • Small Number Example (0.00450.0045):
    • Shift decimal point rightward until only one non-zero digit remains to the left: 0.0045→4.50.0045 \rightarrow 4.5
    • Decimal shifted 33 places right.
    • Result: 0.0045=4.5×10−30.0045 = 4.5 \times 10^{-3}
  • Converting Scientific Notation to Standard Form:

    • Example 1: 3.4×1033.4 \times 10^3
    • Shift decimal point 33 places right: 34003400
    • Example 2: 6.2×10−46.2 \times 10^{-4}
    • Shift decimal point 44 places left: 0.000620.00062
  • Radiography Practical Examples:

    • Exposure time of 0.005 sec0.005\,\text{sec} converted to scientific notation: 5.0×10−3 sec5.0 \times 10^{-3}\,\text{sec}
    • Electrical frequency of 100,000 Hz100{,}000\,\text{Hz} converted to scientific notation: 1.0×105 Hz1.0 \times 10^5\,\text{Hz}
  • Multiplication in Scientific Notation:

    • Procedure:
    1. Multiply the numerical coefficients.
    2. Add the exponents of the base 1010 terms (10m×10n=10m+n10^m \times 10^n = 10^{m+n}).
    3. Normalize back into standard scientific notation if the product coefficient is outside the range [1,10)[1, 10).
    • Example 1: (2×103)(3×102)(2 \times 10^3)(3 \times 10^2)
    • Multiply coefficients: 2×3=62 \times 3 = 6
    • Add exponents: 103×102=103+2=10510^3 \times 10^2 = 10^{3+2} = 10^5
    • Answer: 6×1056 \times 10^5
    • Example 2: (4×104)(2×103)(4 \times 10^4)(2 \times 10^3)
    • Multiply coefficients: 4×2=84 \times 2 = 8
    • Add exponents: 104×103=104+3=10710^4 \times 10^3 = 10^{4+3} = 10^7
    • Answer: 8×1078 \times 10^7
  • Division in Scientific Notation:

    • General Formula:
    • \frac{a \times 10^m}{b \times 10^n} = \bindleft(\frac{a}{b}\bindright) \times 10^{m-n}
    • Procedure:
    1. Divide the coefficients (a \bindiv b).
    2. Subtract the denominator exponent from the numerator exponent (10m−n10^{m-n}).
    3. Normalize back into standard scientific notation if needed.
    • Example 1:
    • Expression: 8×1062×102\frac{8 \times 10^6}{2 \times 10^2}
    • Divide coefficients: 8 \bindiv 2 = 4
    • Subtract exponents: 10^6 \bindiv 10^2 = 10^{6-2} = 10^4
    • Answer: 4×1044 \times 10^4
    • Example 2:
    • Expression: 9×1053×102\frac{9 \times 10^5}{3 \times 10^2}
    • Divide coefficients: 9 \bindiv 3 = 3
    • Subtract exponents: 10^5 \bindiv 10^2 = 10^{5-2} = 10^3
    • Answer: 3×1033 \times 10^3

Dimensional Analysis and Metric Conversions

  • Principles of Dimensional Analysis:

    • Dimensional analysis is an algebraic conversion technique that employs unit factors to change a quantity from one unit of measurement to another without altering its value.
    • Step-by-Step Procedure:
    1. Write down the given quantity and its initial unit.
    2. Multiply by a valid conversion factor fraction.
    3. Arrange units diagonally opposite each other so unwanted units cancel out.
    4. Multiply across all numerators and divide by the product of all denominators.
    5. Verify that all unwanted units are eliminated, leaving only the desired unit.
  • Standard Dimensional Analysis Examples:

    • Example 1: Inches to Centimeters:
    • Convert 8 in8\,\text{in} to centimeters given 1 in=2.54 cm1\,\text{in} = 2.54\,\text{cm}.
    • Setup: 8 in×2.54 cm1 in8\,\text{in} \times \frac{2.54\,\text{cm}}{1\,\text{in}}
    • Cancel inches: 8×2.54=20.32 cm8 \times 2.54 = 20.32\,\text{cm}
    • Answer: 20.32 cm20.32\,\text{cm}
    • Example 2: Pounds to Kilograms:
    • Convert 150 lb150\,\text{lb} to kilograms given 1 kg=2.2 lb1\,\text{kg} = 2.2\,\text{lb}.
    • Setup: 150 lb×1 kg2.2 lb=68.18 kg150\,\text{lb} \times \frac{1\,\text{kg}}{2.2\,\text{lb}} = 68.18\,\text{kg}
    • Answer: 68.2 kg68.2\,\text{kg}
    • Example 3: Multi-Step Conversion (Miles to Inches):
    • Convert 2 mi2\,\text{mi} to inches.
    • Equivalencies: 1 mi=5280 ft1\,\text{mi} = 5280\,\text{ft}; 1 ft=12 in1\,\text{ft} = 12\,\text{in}.
    • Setup: 2 mi×5280 ft1 mi×12 in1 ft2\,\text{mi} \times \frac{5280\,\text{ft}}{1\,\text{mi}} \times \frac{12\,\text{in}}{1\,\text{ft}}
    • Compute: 2×5280×12=126,7202 \times 5280 \times 12 = 126{,}720
    • Answer: 126,720 in126{,}720\,\text{in}
    • Example 4: Radiographic Patient Weight Conversion:
    • Convert a 165-lb165\text{-lb} patient to kilograms.
    • Setup: 165 lb×1 kg2.2 lb=75 kg165\,\text{lb} \times \frac{1\,\text{kg}}{2.2\,\text{lb}} = 75\,\text{kg}
    • Answer: 75 kg75\,\text{kg}
    • Example 5: Tube Current and Time to Exposure Output (mAs\text{mAs}):
    • Radiographic formula: mAs=mA×s\text{mAs} = \text{mA} \times \text{s}
    • Given: Tube current = 200 mA200\,\text{mA}; exposure duration = 0.05 sec0.05\,\text{sec}.
    • Setup: 200×0.05=10200 \times 0.05 = 10
    • Answer: 10 mAs10\,\text{mAs}

Signed Numbers and Absolute Value

  • Signed Numbers in Context:
    • Signed numbers carry an explicit positive (+$) or negative (-) sign designating direction, balance, or magnitude relative to zero.\n - Zero (0) is neutral: neither positive nor negative.\n - **Real-World Representations**:\n - Deposit of \$50 \rightarrow +50\n - Withdrawal of \$50 \rightarrow -50\n - Temperature 10^\circabovezeroabove zero\rightarrow +10^\circ\n - Temperature 10^\circbelowzerobelow zero\rightarrow -10^\circ\n - Gain of 5\,\text{lb} \rightarrow +5\n - Loss of 5\,\text{lb} \rightarrow -5\n\n- **Integers**:\n - Defined as whole numbers and their negative opposites, including zero:\n - \binddots, -5, -4, -3, -2, -1, 0, 1, 2, 3, 4, 5, \binddots\n - **Positive integers**: 1, 2, 3, 10\n - **Negative integers**: -1, -2, -3, -10\n - **Zero**: 0\n - **Non-integers**: Decimals and non-whole fractions (2.5,,\frac{1}{2},,3.14).\n\n![Number line illustrating positive and negative signed integers centered around zero](https://assets.knowt.com/pdf-flow-prod/2ebb1c47-e5eb-4b81-aec8-13b82639bb6d-figures/74.jpg)\n\n- **Absolute Value**:\n - Represents the geometric distance of a number from zero on a standard number line.\n - Magnitude is always non-negative (either positive or zero).\n - Notation uses vertical parallel bars: |x|\n - **Examples**:\n - Example 1: |5| = 5((5islocatedis located5 units away from zero).\n - Example 2: |-5| = 5((-5islocatedis located5 units away from zero).\n - Example 3: |0| = 0((0 is zero units away from itself).\n - **Comparative Expression Evaluation**:\n - With Absolute Values: |-5| + |3| = 5 + 3 = 8\n - Without Absolute Values: -5 + 3 = -2\n - The absolute value operator converts negative quantities into positive distance magnitudes prior to performing addition.\n\n- **Operational Rules for Signed Numbers**:\n - **Addition**:\n - Same signs: Add the absolute values together and preserve the shared sign.\n - Different signs: Subtract the smaller absolute value from the larger absolute value and retain the sign of the number possessing the larger absolute value. Example: -8 + 3 = -5.\n - **Subtraction**:\n - Rule: Keep, Change, Change (KCC). Retain the first value, switch the subtraction operator to addition, and invert the sign of the second operand. Proceed using addition rules. Example: 5 - (-3) = 5 + 3 = 8.\n - **Multiplication**:\n - Matching signs produce a positive outcome ((+) \times (+) = (+)andand(-) \times (-) = (+)).\n - Differing signs produce a negative outcome ((+) \times (-) = (-)andand(-) \times (+) = (-)).Example:). Example:-4 \times 3 = -12.\n - **Division**:\n - Matching signs produce a positive outcome ((+) indiv (+) = (+)andand(-) indiv (-) = (+)).\n - Differing signs produce a negative outcome ((+) indiv (-) = (-)andand(-) indiv (+) = (-)).Example:). Example:-20 indiv 4 = -5.\n\n# Order of Operations and Algebraic Fundamentals\n\n- **Order of Operations (PEMDAS)**:\n - The universal convention governing the sequence in which mathematical operations must be evaluated, calculated from left to right:\n 1. **P**: Parentheses (innermost groupings first)\n 2. **E**: Exponents\n 3. **M**: Multiplication\n 4. **D**: Division (Multiplication and Division hold identical priority; execute left to right)\n 5. **A**: Addition\n 6. **S**: Subtraction (Addition and Subtraction hold identical priority; execute left to right)\n - **Step-by-Step PEMDAS Examples**:\n - **Example 1 (3 + 4 \times 2)**:\n - Multiply first: 4 \times 2 = 8\n - Add next: 3 + 8 = 11\n - Answer: 11\n - **Example 2 ((3 + 4) \times 2)**:\n - Evaluate parentheses first: 3 + 4 = 7\n - Multiply: 7 \times 2 = 14\n - Answer: 14\n - **Example 3 (2^3 + 5)**:\n - Evaluate exponent first: 2^3 = 8\n - Add: 8 + 5 = 13\n - Answer: 13\n - **Example 4 (20 indiv 5 \times 2)**:\n - Calculate left to right: 20 indiv 5 = 4\n - Multiply: 4 \times 2 = 8\n - Answer: 8\n\n- **Structural Components of Algebraic Expressions**:\n - **Variable**: A letter or symbol representing an unknown numerical value (e.g., x).\n - **Coefficient**: A constant numerical multiplier situated directly before a variable (e.g., 5inin5x).\n - **Constant**: A fixed numerical quantity standing alone (e.g., 7).\n - **Term**: An individual mathematical component within an expression (e.g., 3x).\n - **Expression**: A mathematical phrase comprising terms and operators without an equality sign (e.g., 3x + 7).\n - **Equation**: A mathematical assertion stating that two expressions are equal (e.g., 3x + 7 = 10).\n\n- **The Distributive Law**:\n - Multiplying a monomial term by an expression inside parentheses yields the identical result as multiplying the external term by each internal term individually, then combining.\n - **Algebraic Formulas**:\n - Addition: a(b + c) = ab + ac\n - Subtraction: a(b - c) = ab - ac\n - **Numerical Examples**:\n - Example 1 (Addition): 3(4 + 2)\n - Step 1 (Distribute): (3 \times 4) + (3 \times 2)\n - Step 2 (Multiply): 12 + 6\n - Step 3 (Add): 18\n - Example 2 (Subtraction): 5(7 - 2)\n - Step 1 (Distribute): (5 \times 7) - (5 \times 2)\n - Step 2 (Multiply): 35 - 10\n - Step 3 (Subtract): 25\n - **Expanding Algebraic Expressions (Parentheses Removal)**:\n - 3(x + 2) = 3x + 6\n - 4(x - 5) = 4x - 20\n - -2(x + 7) = -2x - 14\n - -3(x - 4) = -3x + 12\n - -(x + 9) = -x - 9\n - -(x - 9) = -x + 9\n\n- **Combining Like Terms**:\n - Example: Simplify 2(x + 4) + 3x\n - Distribute coefficient: 2x + 8 + 3x\n - Group like terms: 2x + 3x + 8\n - Combined result: 5x + 8\n\n- **Parentheses within Parentheses (Nested Parentheses)**:\n - **Rule**: Always compute starting from the innermost parentheses outward.\n - **Example 1 (2(3 + (4 + 1)))**:\n - Step 1 (Inner group): 4 + 1 = 5 ightarrow 2(3 + 5)\n - Step 2 (Outer group): 3 + 5 = 8 ightarrow 2(8)\n - Step 3 (Multiply): 2 \times 8 = 16\n - Answer: 16\n - **Example 2 (5(2 + (6 - 3)))**:\n - Step 1 (Inner group): 6 - 3 = 3 ightarrow 5(2 + 3)\n - Step 2 (Outer group): 2 + 3 = 5 ightarrow 5(5)\n - Step 3 (Multiply): 5 \times 5 = 25\n - Answer: 25\n\n- **Equation Truth Values and Solutions**:\n - **True Equation**: An equation where both sides yield equal numerical values upon evaluation. Example: 3 + 4 = 7((7 = 7; True).\n - **False Equation**: An equation where both sides yield unequal numerical values upon evaluation. Example: 3 + 4 = 10((7 indne 10; False).\n - **Solution**: The specific numerical value of a variable that makes an equation true. Example: In x + 3 = 8,setting, settingx = 5satisfiestheequation(satisfies the equation (5 + 3 = 8; True).\n\n# Direct and Inverse Proportional Variation\n\n- **Direct Variation**:\n - **Definition**: A proportional relationship where two variables increase or decrease together at a constant rate.\n - **Formula**:\n - y = kx\n - Constant of variation: k = \frac{y}{x}\n - **Mathematical Example**:\n - Given: x = 4andandy = 20\n - Formula: y = kx\n - Substitute: 20 = k(4)\n - Solve for constant: k = 5\n - Resulting equation: y = 5x\n - **Radiography Practical Example: \text{mAs} Direct Proportionality**:\n - Radiographic formula: \text{mAs} = \text{mA} \times \text{s}\n - If exposure duration (\text{s})isheldconstant,doublingthetubecurrent() is held constant, doubling the tube current (\text{mA})doublesthetotalexposure() doubles the total exposure (\text{mAs}).\n - Direct variation data table:\n - Tube current 100\,\text{mA} ightarrow 10\,\text{mAs}\n - Tube current 200\,\text{mA} ightarrow 20\,\text{mAs}\n - Tube current 300\,\text{mA} ightarrow 30\,\text{mAs}\n\n- **Inverse (Indirect) Variation**:\n - **Definition**: A relationship between two variables wherein they shift in mutually opposite directions: as one variable increases, the other decreases proportionally, and vice versa.\n - **Formulas**:\n - y = \frac{k}{x}\n - Product form: xy = k\n - Where xandandyarevariablesandare variables andk is the constant of variation.\n - **Radiography Practical Example: Exposure Time and Tube Current Tradeoff**:\n - Assume total exposure output is held constant at 20\,\text{mAs}((\text{mAs} = \text{mA} \times \text{s}).\n - As tube current (\text{mA})isdoubled,exposuretime() is doubled, exposure time (\text{s}) must be halved to keep the product constant.\n - Indirect variation data table:\n - Tube current 100\,\text{mA} ightarrow 0.20\,\text{s}\n - Tube current 200\,\text{mA} ightarrow 0.10\,\text{s}\n - Tube current 400\,\text{mA} ightarrow 0.05\,\text{s}\n\n# The International System of Units (SI) and Radiologic Physics\n\n- **Fundamental Dimensions of Physical Measurement**:\n - Mass\n - Length\n - Time\n\n- **The 7 Base SI Units**:\n - **Length**: meter (\text{m})—Thedistancethatlighttravelsinavacuumin) — The distance that light travels in a vacuum in\frac{1}{299{,}792{,}485} seconds.\n - **Mass**: kilogram (\text{kg}) — The fundamental measure of the amount or quantity of matter.\n - **Time**: second (\text{s}) — Quantified via the vibrational cycles of cesium-133 atoms using an atomic clock.\n - **Electric Current**: ampere (\text{A})\n - **Temperature**: kelvin (\text{K})\n - **Amount of Substance**: mole (\text{mol})\n - **Luminous Intensity**: candela (\text{cd})\n\n- **Common Metric (SI) Prefixes**:\n - Giga (\text{G}):):10^9\n - Mega (\text{M}):):10^6\n - Kilo (\text{k}):):10^3\n - Hecto (\text{h}):):10^2\n - Deka (\text{da}):):10^1\n - Base Unit: 10^0\n - Deci (\text{d}):):10^{-1}\n - Centi (\text{c}):):10^{-2}\n - Milli (\text{m}):):10^{-3}\n - Micro (\mu):):10^{-6}\n - Nano (\text{n}):):10^{-9}\n\n- **SI Units Specified in Radiologic Technology**:\n - **Distance**: meter (\text{m})—UsedforSource−to−ImageDistance() — Used for Source-to-Image Distance (\text{SID}) measurements.\n - **Time**: second (\text{s}) — Used for x-ray tube exposure time.\n - **Electric Current**: ampere (\text{A}) — Quantifies general electric current.\n - **Current (Commonly Used)**: milliampere (\text{mA})—Tubecurrentselections(e.g.,) — Tube current selections (e.g.,200\,\text{mA},,400\,\text{mA}).\n - **Radiation Exposure**: coulomb per kilogram (\text{C/kg}) — Used for air exposure measurements.\n - **Absorbed Dose**: gray (\text{Gy}) — Quantifies patient radiation dose.\n - **Equivalent Dose**: sievert (\text{Sv}) — Standard unit for occupational radiation protection monitoring.\n - **Frequency**: hertz (\text{Hz}$$) — Measures x-ray generator operational frequency.

Academic Assignment Schedule

  • Deadlines for Coursework:
    • Due by midnight on October 14:
    • Worksheet 1-1
    • Worksheet 1-2
    • Build an Atom PhET Simulator
    • Due by midnight on October 16:
    • Worksheet 2-1
    • Worksheet 2-2