Chapter 16 - the cytoskeleton
Part 1
Spatial and mechanical functions of cells depend on the cytoskeleton
allows cells to establish strength, order, and movement
There are three types of filaments, all are distinct, with some shared properties
are all dynamic
The entire cytoskeleton is highly dynamic because it can change the function of the three with respect to each other
overview of cytoskeletal elements
actin
aka microfilaments
determine the shape of the cell surface
aid in whole cell locomotion
aid in mitosis
microtubule
determine the position of organelles
direct intracellular transport
form a mitotic spindle during mitosis
is the largest
intermediate filaments
provide mechanical strength to cells
The only type of cytoskeletal element that has multiple family members
actin and microtubules
assist during cell division and crawling
Actin
mostly present in the cortex, right below the plasma membrane
assist in cell movement and attachment
They form lamellipodia and filopodia
Part 2
Actin
mostly present in the cortex, right below the plasma membrane
assists in cell movement and attachment
They form lamellipodia and filopodia
structure of actin
long polymers made of the same subunits
monomer is g-actin (globular)
exhibits polarity
can hold an ATP that can be hydrolyzed
It is the smallest of the cytoskeletal elements
g-actins on top of each other from a filament called F-actin (filamentous)
are polar
consists of 2 wrapped together
The positive and negative ends have nothing to do with charge; the names have to do with how fast they grow or shrink
The barbed end is the positive end
The pointed end is the negative end
Nucleation
Is the rate-limiting step in forming an actin filament
G-actin has to form a nucleus before it can form a filament
The nucleus consists of 3 g-actins together ( a trimer)
Filament grows quickly after the trimer is formed
will reach steady state (equilibrium) where association is equal to dissociation
This means that the concentration of free monomers will equal the critical concentration (Cc)
Actin filaments have 2 ends growing at different rates
Both the + and - ends can gain or lose subunits
The rate of growth is much higher at the + end
If the concentration of free monomers is greater than the Cc, then polymerization will occur
If the concentration of free monomers is less than the Cc, then depolymerization will occur
Cc is different for the 2 ends, which is how different rates of growth are achieved
Treadmilling
occurs when the concentration of free monomers is between the two Cc’s
less than the Cc at the - end but greater than the Cc at the + end
When an actin molecule is treadmilling, if it is at the steady state, this means it is not changing much in terms of overall size, but it is not sitting statically
dynamic, but length is consistent
indicated with D’s or T’s, which indicate the state of ATP in each of the G-actin monomers
always are added in the ATP-bound form
After being in filament for a certain amount of time, ATP will automatically hydrolyze itself
ATP cap forms when the rate of addition of g-actin is greater than the rate of ATP hydrolysis
This protects the end of the actin filament
Only will lose monomers containing ADP
Cell toxins stabilize or destabilize actin or microtubules - table
Actin
Latrunculin
depolymerizes
Cytochalasin
depolymerizes
Phalloidin
stablaizes
Microtubules
Taxol (paclitaxel)
stabalizes
nocodazole
depolymerizes
colchicine
depolymerizes
Actin-binding proteins influence dynamics
50% of actin is in monomers, even though the concentration of the monomers is way higher than the Cc
There are many things in cells that influence actin behavior
Thymosin and Profilin alter actin binding
Thymosin is a protein that will block the addition of g-actin
binds to g-actin, preventing binding
Profilin will encourage the addition of g-actin
favors the formation of f-actin by binding to g-actin and making it have a higher affinity for the + end of actin filaments
The cell will express profilin when it wants to grow f-actin
Cell will express thymosin when it wants f-actin to shrink
Actin nucleators
Arp 2/3
a complex that can provide 2 of the 3 g-actin needed to form nucleaus
needs to grab 1 g-actin to form a nucleus
greatly speeds up the formation of actin filaments
caps the - end and only allows growth at the + end
Arp 2/3 proteins stick off the sides of existing actin and always bind at a 70-degree angle
favors a branched actin structure
This structure is found in the cortex below the membrane and in the lamellopodia
Formin
encourages formation at the + end and binds at the + end
acts as a teeter-totter
binds to + end and one side of formin will stay bound to actin, and the other side will flip up and recruit another g-actin
This cycle will repeat, growing the f-actin
favors an unbranched actin structure, which can be found in stress fibers associated with crawling cells in filopodia and the contractile ring
has whiskers that bind profilin
Capping proteins
Cap Z
protein that prevents growth and shrinkage at the + end
Tropomodulin
prevents growth and shrinkage at the - end
Cap proteins are used in skeletal muscle
Actin severing by cofilin
can break existing actin filaments
twist them tightly to make them break
Prefers to bind to ADP actin
breaks old actin, not new actin
Actin bundling proteins
stiffly hold actin together
different depending on what type of actin structure is formed
unbranched
Fimbrin is shorter
alpha-actin is longer
Myosin and actin - contractibility
Myosin is an actin-based protein motor
Skeletal muscle myosin II is formed by two heavy chains and 4 light chains, forming a coiled-coil domain
How myosin II walks along microfilaments
The head of myosin II is bound to the actin filament
The myosin is fixed, and the actin moves
When there is no nucleotide bound to myosin, the myosin is tightly bound to actin
An ATP molecule is bound by the myosin head, losing affinity for actin
Myosin head hydrolyzes ATP, forming a cocked position, aligning with a dif g-actin on the filament
Myosin drops its inorganic phosphate, allowing the head to bind to actin, losing ADP, causing myosin to snap back to the straight position, sliding the whole filament by a space of 1 g-actin
Myosin II muscle contraction
Inside skeletal muscle cells are tube structures called myofibrils
Each myofibril is broken into segments called Z-discs
The space between 2 z dics is called a sarcomere
Sarcomeres are the smallest contractile unit of a skeletal muscle cell
They are composed of thick and thin filaments
Thick are myosin bundles
thin are actin
The thick filaments are in the middle
When muscle cells get a signal from nerve cells, it will release calcium from the SR, activating the myosin mechanism
will move the entire z disc towards the center
On the other side of the sarcomere, they are oriented oppositely, pulling Z-discs closer, shortening the length of the sarcomere, and contracting the muscle
Skeletal muscle contraction is regulated by troponin and tropomyosin
Tropomyosin binds to the filament groove, so myosin is not able to bind actin when there is no nerve signal, because tropomyosin is in the way
Tropomyosin is bound to the protein troponin
When a cell gets a signal from a nerve cell, calcium is released from the SR and binds to troponin
When bound, troponin will change conformation, pulling tropomyosin off of actin binding site for myosin
Calcium is brought back into the SR, and the muscle relaxes
Myosin II contraction in non-muscle cells
has a similar structure but does not form big filaments
activated by phosphorylation instead of calcium
Non-muscle myosin II is usually folded and gets phosphorylated and opens up, forming baby filaments that can contract
There are many myosins other than myosin II that have different functions in the cell
Part 3
Microtubules
much larger than actin
Mitochondria in cells all radiate from a certain position called the MTOC
Nucleation happens at the MTOC
structure
The most basic unit is a dimer
Add dimers of beta and alpha tubulin 1:1
Both have a nucleotide-binding domain
have GTP instead of ATP
Beta can sometimes hydrolyze GTP, but alpha never does
Dimers stacked on top of each other in the same orientation form a full microtubule
Beta is always on top
always have alpha and beta in line
This line is called a protofilament
13 protofilaments in a ring make a full microtubule
are polarized, they have a + end and a - end
end refers to their ability to grow or shrink in a test tube because since in cells the - end is attached at the MTOC
Microtubules undergo dynamic instability
- ends are anchored
does not grow or shrink because it is stuck in the nucleator
+ end can alternate between growing and shrinking
Shrinking is called catastrophe
Growing is called rescue
If beta has a GTP, that is the form that is always added
When added, it is linear and creates a straight microtubule
If adding GTP dimers faster than they are hydrolyzed, that will form a GTP cap
If GTPs get hydrolyzed, which they will over time, the shape starts to curve, and microtubules undergo catastrophe
In catastrophe, protofilaments start to coil and peel off
When + ends go back and forth between growing and shrinking, it is called dynamic instability
can rapidly transition
has to do with the Cc being between 2 forms of the same end
If free tubulin concentration is between the critical concentration of the + end in GTP form and the - end in GDP form, then it will transition
Colchicine and nocodazole destabilize microtubules
favor catastrophe
Taxol stabilizes microtubules
used in cancer therapy
Cells can not shorten microtubules when dividing when treated with Taxol
Microtubule Nucleation by gamma-TuRC
All microtubules come out of the organizing center called the MTOC
centrosome for eukaryotes
gamma-TuSC has 2 tusks (forks), and on each end is a tubulin called gamma tubulin
gamma-tubulin starts every protofilament
need 7 gamma tubulin to have a full microtubule because 13 protofilaments are needed
7 gamma TuSC will form a ring called gamma TuRC
it is a spiral so first gamma tubulin is under the last
Reason 2×7= 14, but you only get 13 protofilaments
gamma TuRC is stuck in centrosome
- ends of microtubules stuck in gamma TuRC and there are lots of gamma TuRCs in the centrosome
Microtubules emanate from centrosome in animal cells
a centrosome has 2 centrioles in the middle oriented at 90 degrees
around the centrioles is a jelly called pericentriolar material
gamma TuRCs embedded in pericentriolar material
outside jelly, surrounded by little rings with microtubules sticking out
all organelles are positioned through microtubules
Microtubules control movement for the secretory pathway
Embedded in centrosome are the centrioles
centrioles are made of microtubules
made of triplet microtubules
3 mictrotubules connected sharing 3 protofilaments between each that is touching
made of 9 triplet microtubules and has a SAS-6 complex
microtubule associated proteins (MAPs)
a protein that can modify microtubule behavior
Length of MAP domain determines microtubule spacing
microtubules radiate out from MTOC
There are proteins that help line up microtubules with different length of arms
MAP2
binds to side of microtubules and sticks out arm maing sure no other microtubules can get closer than an arms distance
tau
same function as MAP2 but with a shorter arm
MAPs affect rate of polymerization at the + end
XMAP215
a protein favoring rescue because it can go pick us tubulin dimers and bring them to the + end and help them to be added
Kinesin 13 (aka catastrophe factor)
is a catastophe factor, goes to the + end and favors catastrophe
peels off tubulin dimers
Tubulin sequestering and microtubule severing proteins
Stathmin
tubulin sequestering protein
functions to stop growth at the + end
will bind 2 tubulin dimers, and if statmin is bound to them they can not be added to the + end of microtubules
Katanin
microtubule severing protein
will chop us microtubules into bits
Microtubule based motor proteins: kinesins
most walk toward + end of microtubules holding cargo
common family members are kinesin 1, 5, 14, and 13, but 13 is odd
kinesin walking mechanism
has to do with affinity, alternating 2 head domains for how much affinity they have
heads are binding to beta subunits on tubulin
if bound to ATP it is bound tightly
if bound to ADP it is bound loosely
back head is bound tight and front is loose
back head will hydrolyze ATP to ADP
at nearly the same time the front head exchanges ADP for ATP
front head binds to ATP and back swings forward and reattaches
Minus end directed motors: dyneins
carry cargo toward the - end of the microtubules
requires an adaptor complex
dynactin complex
complex is bound to vesicle
order is microtubule bound to dynein bound to dynactin bound to cargo
Kinesin and Dynein move cargo in opposite directions
example in melanocyles (pigment producing cells)
pathway is under the control of cAMP
decrease in cAMP, pigment granuoles will cluster toward cell center
increase in cAMP, pigment granuoles will disperse throughout cell
high cAMP will activate kinesins moving pigments towards the + end
anterograde movement through the secretory pathways
low cAMP will activate dyneins moving pigments toward - end of microtubules
retrograde movement for vesicles
This is how the fish can change color
they will activate the dynein pathway if on a light background
Eukaryotic cilia and flagella
sperm cell is the only flagellated cell in eukaryotes and it uses tail to swim (locomotion)
single celled eukaryotic that have cilia, use it to swim
in animals cilia is not usually used to move cells
cilia beating moves fluid over cell
many cells on the inside of lungs have cilia to help move mucus and get rid of debris
animals have them in the trachea and in inner ear to help perceive sound
cilia and flagella are built from microtubules and utilize dynein motor proteins
exhibit 9-fold symmetry
have a 9+2 arrangement
in center have 2 single microtubules and on the outside they have 9 doublets
how dyneins are working in flagella
2 doublet microtubules with dyneins existing between them
one side of dyneins is fixed to the microtubule
other side has feet domains and as they walk toward the - end, they slide 2nd microtubule doublet relative to the first
Cross-linking proteins limit how far 1 microtubule doublet can slide relative to the other
Part 3
Intermediate filaments
Different cell types have different members of this family
They are a large family that’s very heterogeneous (diverse)
They all have the same common function of strength
Structure
made of a monomer that is an alpha helix
monomer combines with another to make a coiled-coil dimer
dimers stagger to form tetramers
tetramers associate to form 8 tetramers and so on
cell motility - polarization and migration
Many cells move by crawling over surfaces rather than by cilia or flagella
This is extremely important and development and is also important in the nervous system, immune cells, and osteoclasts
3 steps in the crawling mechanism
protrusion, attachment, and traction
cell has 3 “feet” called focal attachments that are sitting on some extracellular matrix
The cell forms the lamellipodium (a fan-shaped structure) using profilin and cofilin - this is a protrusion
Cells grab the substratum with the lamellipodium - attachment
cell contracts to pull the body of the cell forward to where the lamellipodium was
lamellipodia
made of branched actin
Arp 2/3 is a nucleator, and as the lamellipodium grows, the front edge, called the leading edge, has a high concentration of Arp 2/3 to help grow actin filaments and push the membrane forward
In the back of the lamellipodium, old actin becomes ADP-bound, and cofilin breaks filaments, and g-actins will get recharged with ATP and moved to the front so they can be added
Myosin contraction and cell adhesion allow cells to pull themselves forward
Proteins called integrin are attached to the substratum
Cells attach the other side of integrins to their actin
does this in order to push the lamellipodium forward
Pull back of the cell forward by contracting using myosin
Crawling cells have modified actin
Actin in the lamellipodium is branched, and along the rest of the cell, it forms long parallel bundles called stress fibers
Stress fibers contract to pull the back of the cell up
Cell polarization controlled by the rho protein family
The rho family is of GTPases
Rho favors the formation of long, straight actin in stress fibers
Rac favors the formation of lamellipodia
cdc42 favors the formation of filopodia
Filopodia are antennas on the end of lamellipodia
Coordination of cytoskeletal elements
When bringing the back of the cell forward in crawling, you have to bring the internal organelles with
Microtubules position organelles in cells
neurons
have projections called dendrites and axons
Axons can be very long
They are packed with intermediate filaments that provide strength
The tip of an axon is a growth cone
uses the lamellipodia and filopodia for the movement of the growth cone
plakins (proteins that bind different cytoskeletal elements
help intermediate filaments interact with both microtubules and actin